VPN site to Site (unable to connect LANs)
Hi all
Note: Attached, is the design configuration and VPN configurations.
Site-to-site VPN has been configured on two 2811 routers (HQ - RTR & BRANCH - RTR). HQ - RTR has a static public IP of 180.12.54.1, while the BRANCH-RTR has a dynamic public IP of 10.93.7.25 via a modem to ISP with its own configured LAN of 10.0.0.0/24.
To 'show encryption session' help, the tunnel between two routers it's 'UP-ACTIVE', however the LANs: in Branch 10.0.0.0/24 and 10.10.10.0/24 to Headquarters are unable to ping to another.
Oddly enough, via "isakmp crypto to show his":
HQ - RTR results show dst = 180.12.54.1; SRC = 10.93.7.25 (i.e. Orange Tunnel)
(although see the BRANCH-RTR: dst = 180.12.54.1; src = 10.0.0.2 (i.e. the Green Tunnel))
By train to try to solve this problem, because another installation program must be configured: allow LAN 10.10.50.0/24 communicate with HQ Branch LAN 10.10.10.0/24. This LAN has already been configured for Internet access.
Advice and suggestions are most welcome and appreciated.
Thank you.
Hello Terry,
What is the purpose of these access-list 1-HUB-RTR? But it is justified that reject order configured in acl 115, however, because it's too much running and ACL 115 seems effective. I think that if you remove that VPN should work fine. Let me know the results.
IP nat inside source list 1 interface FastEthernet0/1 overload
access-list 1 permit 10.10.10.0 0.0.0.255
Tags: Cisco Security
Similar Questions
-
Unable to connect to the client to site VPN
Hello
Suddenly this morning I couldn't connect to the VPN from my work. I did not update the operating system or any other application in my Mac. I checked with my VPN provider and all is well. I tried to connect to the VPN from another PC and the connection was successful.
It of weird, can you help me on this?
Thank you
My Info:
OS X El Capitan
Version 10.11.6 (15-1004)
Error log:
7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: agreed to the takeover of vpn connection.
7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: IPSec to connect to the server 50.57.56.150
7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: connection.
7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: IPSec Phase 1 started (initiated by me).
7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).
7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: > > > > > status of phase change = Phase 1 began by us
7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: no message must be encrypted, 0x14a1, side 0 status
7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: IPSec to connect to the server 50.57.56.150
7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: connection.
7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: IPSec Phase 1 started (initiated by me).
7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).
7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: > > > > > status of phase change = Phase 1 began by us
7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: port 62465 anticipated, but 0
7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: IKEv1 Phase 1 AUTH: success. (Initiator, aggressive-Mode Message 2).
7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: > > > > > status of phase change = Phase 1 began with a peer
7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: IKE Packet: receive a success. (Initiator, Aggressive Mode 2 message).
7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: initiating IKEv1 Phase 1: success. (Initiator, aggressive Mode).
7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: IKE Packet: forward the success. (Initiator, Aggressive Mode 3 message).
7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: IPSec Phase 1 established (initiated by me).
7 September 11:18:05 racoon Gerards-MacBook-Pro [680]!: jumped to retransmit the frags: frag_flags 1, r-> sendbuf-> l 136, max 1280
7 September 11:18:05 racoon Gerards-MacBook-Pro [680]: retransmitted packet received from the 50.57.56.150 [500].
7 September 11:18:05 racoon Gerards-MacBook-Pro [680]: the packet is retransmitted by 50.57.56.150 [500].
7 September 11:18:13 racoon Gerards-MacBook-Pro [680]!: jumped to retransmit the frags: frag_flags 1, r-> sendbuf-> l 136, max 1280
7 September 11:18:13 racoon Gerards-MacBook-Pro [680]: retransmitted packet received from the 50.57.56.150 [500].
7 September 11:18:13 racoon Gerards-MacBook-Pro [680]: the packet is retransmitted by 50.57.56.150 [500].
7 September 11:18:21 racoon Gerards-MacBook-Pro [680]!: jumped to retransmit the frags: frag_flags 1, r-> sendbuf-> l 136, max 1280
7 September 11:18:21 racoon Gerards-MacBook-Pro [680]: retransmitted packet received from the 50.57.56.150 [500].
7 September 11:18:21 racoon Gerards-MacBook-Pro [680]: the packet is retransmitted by 50.57.56.150 [500].
7 September 11:18:27 racoon Gerards-MacBook-Pro [680]: IPSec disconnection from the server 50.57.56.150
7 September 11:18:27 racoon Gerards-MacBook-Pro [680]: IKE Packet: forward the success. (Information message).
7 September 11:18:27 racoon Gerards-MacBook-Pro [680]: IKEv1-Information Notice: pass success. (Delete the ISAKMP Security Association).
7 September 11:18:27 racoon Gerards-MacBook-Pro [680]: glob found no match for the path "/ var/run/racoon/*.conf".
7 September 11:18:27 racoon Gerards-MacBook-Pro [680]: IPSec disconnection from the server 50.57.56.150
September 7 11:18:27 Gerards-MacBook-Pro UserNotificationCenter [682]: * ATTENTION: the method in the class userSpaceScaleFactor NSWindow is discouraged on 10.7 and later versions. It should not be used in new applications. Use convertRectToBacking: instead.
7 September 11:18:29 racoon Gerards-MacBook-Pro [680]: connection.
7 September 11:18:29 racoon Gerards-MacBook-Pro [680]: unknown information exchange has received.
-
remote VPN and vpn site to site vpn remote users unable to access the local network
As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config
The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.
ASA Version 8.2 (2)
!
host name
domain kunchevrolet
activate r8xwsBuKsSP7kABz encrypted password
r8xwsBuKsSP7kABz encrypted passwd
names of
!
interface Ethernet0/0
nameif outside
security-level 0
PPPoE client vpdn group dataone
IP address pppoe
!
interface Ethernet0/1
nameif inside
security-level 50
IP 192.168.215.2 255.255.255.0
!
interface Ethernet0/2
nameif Internet
security-level 0
IP address dhcp setroute
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
management only
!
passive FTP mode
clock timezone IST 5 30
DNS server-group DefaultDNS
domain kunchevrolet
permit same-security-traffic intra-interface
object-group network GM-DC-VPN-Gateway
object-group, net-LAN
access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
MTU 1500 Internet
IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
enable ASDM history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
AAA authentication http LOCAL console
AAA authentication enable LOCAL console
LOCAL AAA authentication serial console
Enable http server
x.x.x.x 255.255.255.252 out http
http 192.168.215.0 255.255.255.252 inside
http 192.168.215.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic dynmap 65500 transform-set RIGHT
card crypto 10 VPN ipsec-isakmp dynamic dynmap
card crypto VPN outside interface
card crypto 10 ASA-01 set peer 221.135.138.130
card crypto 10 ASA - 01 the transform-set RIGHT value
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
the Encryption
sha hash
Group 2
lifetime 28800
Telnet 192.168.215.0 255.255.255.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 5
Console timeout 0
management-access inside
VPDN group dataone request dialout pppoe
VPDN group dataone localname bb4027654187_scdrid
VPDN group dataone ppp authentication chap
VPDN username bb4027654187_scdrid password * local store
interface for identifying DHCP-client Internet customer
dhcpd dns 218.248.255.141 218.248.245.1
!
dhcpd address 192.168.215.11 - 192.168.215.254 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Des-sha1 encryption SSL
WebVPN
allow outside
tunnel-group-list activate
internal kun group policy
kun group policy attributes
VPN - connections 8
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split tunnel
kunchevrolet value by default-field
test P4ttSyrm33SV8TYp encrypted password username
username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
username kunauto attributes
Strategy Group-VPN-kun
Protocol-tunnel-VPN IPSec
tunnel-group vpngroup type remote access
tunnel-group vpngroup General attributes
address pool VPN_Users
Group Policy - by default-kun
tunnel-group vpngroup webvpn-attributes
the vpngroup group alias activation
vpngroup group tunnel ipsec-attributes
pre-shared key *.
type tunnel-group test remote access
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
: end
kunauto #.Hello
Looking at the configuration, there is an access list this nat exemption: -.
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
But it is not applied in the States of nat.
Send the following command to the nat exemption to apply: -.
NAT (inside) 0 access-list sheep
Kind regards
Dinesh Moudgil
P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community
-
[VPN site to Site] Are route explicit LAN remote necessary?
Hello
I have configured the VPN Site to be used inside the interface of the ASA (9.4.1)
- The computer in the Zone 1 (192.168.1.1), I can access the Intranet all and it works without a problem--> all traffic through the VPN.
For example, I can use 10.0.0.1 on remote desktop.
2. in the other direction, 10.0.0.1, I try to use the remote desktop on 192.168.1.1, the traffic is not routed over the VPN.
Journal: ' build incoming TCP connections to inside:10.0.0.1/1539 outdoors: 192.168.1.1/3389.
In case 1 (when it worked), he says "build the incoming TCP connection for inside:192.168.1.1/2039 to inside:10.0.0.1/3389.
To fix it, I had to add specific route on ASA: 192.168.1.0/24 inside
It works on both directions.
Is this a normal behavior?
I thought that cryptomap and IPSec SPI would be sufficient.
Thank you
Patrick
Yes, because the cryptomap is mapped to the output interface. The research of the way occurs before you hit the cryptomap. The opposite lane works because you already have a connection (in which are defined interfaces to use).
-
Unable to connect to certain Web sites.
Unable to connect to youtube, google, and yahoo (search but engine mail works well). This has happened after the update of Windows 10.
This problem may also occur in the limited accounts by family parental control of microsoft. you could turn it off for your account as described in the: http://windows.microsoft.com/en-us/windows-10/turn-off-microsoft-family-settings
in case you want to have it by intention, you would be required for some configurations in firefox and install the security certificate for the ms family that is getting used to intercept connections secured in the browser trust store.
Open this link in firefox - and must display a dialog on the addition of a cert. Please check the trust this CA to identify web sites & confirm the change.Alternatively, you can also try the manual procedure described in https://support.microsoft.com/en-us/kb/2965142 in the section about firefox.
-
When I try to access a web site, that Firefox displays 'unable to connect '.
I have access to Firefox and select a web site
Firefox cannot connect poster, the "try" button again does not help
It started right after I did a system restoreHello amayberry!
Because what's going on any website, you go to, can access you other webpages via Internet Explorer or a different browser?
Also try restarting Firefox with disabled modules. You can do this by clicking the top menu button on the left and find him "?" icon at the bottom of the menu. Then select 'restart Firefox with disabled modules... »
Also, I noticed that you did a system restore. If you are unable to access the internet at all through any browser, your Ethernet or WiFi drivers may be outdated or does not work properly.
Thank you, Matthew H.
-
Unable to connect to the Web site
I can get www.calphalon.com to load but am unable to connect. When I created the account, calphalon did exactly the same thing ebay-t - it does not recognize the security code even if it is correct. I did exactly what I do on Ebay when I ask a question to a seller - I use Internet Explorer. You have created calphalon account no problem and am able to sign in and out of my account without any problem with IE, but when I switch back to FF (updated 22), this is a go. With FF, the sign of the popup box is much too small and is completely empty. When I go to the tab of the client service to register a product (this is why I am on the site), I filled up on the sign in info on the page and the kickoff, nothing happens. It's as if I never hit the Send button. It does not seem to convey anything at all. I have signed up for newsletters, but cannot access my account on ff so it seems I'm going w/IE when I get on this site.
Hello
Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
Note: This will be you temporarily disconnect all sites, you're connected to.
To clear the cache and cookies to do the following:- Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
- Under "Time range to clear", select "all".
- Now, click the arrow next to details to toggle the active details list.
- In the list of details, see the Cache and Cookies and uncheck everything.
- Now click the clear now button.
More information can be found in article to clear your cache, history, and other personal information in Firefox .
This solve your problems? Please report to us!
Thank you.
-
Unable to connect to the site of wildtangent games
KServer questions?
After several weeks on the site of WildTangent Games, I am now unable to connect. I tried several times to the direction of their support staff with passwords provided by them. Now they say the problem is most likely an error in KServe (KClient, KStatus). Also, I have Norton AV and got no where with them. What is the problem and what can you do about it? I'm not savvy in computer science.
Hello
A K (including KServer, KClient, KHttp and KStatus) error message typically occurs when your computer attempts to communicate with our servers, but the security software installed on your computer prevents that the communication does not occur. I would say to contact the forum of Wild Tangent games below to submit your question. It would be better option for assistance.
http://Forum.WildGames.com/Hope the information is useful.
-
After installing an update on Friday morning, I am unable to connect to the HTTP site
I ran an update Thursday night and Friday morning that I was unable to connect to the internet. After a repair, it seems that I can connect to https and ftp sites, but I can't connect to non-secure http sites. I don't know if a setting has been changed or if there is another question. Thanks in advance for any help.
original title: unable to connect to http sitesI finished to restore on the eve of the update and everything works. I did it after trying the method 1 & 2 above. WinHTTP was not anywhere on the list of services and connections have been implemented according to the instructions. I hesitate to run updates until I know what caused the problem.
The browser is IE.
Here's the ID numbers updates which took place:
KB2618451, KB2618444, KB2544893, KB2564958, KB2592799, KB2619339, KB2620712, KB2624667, KB2633171, KB2639417, KB2633952, KB2641690 AND KB890830. -
Can anyone help?
Now, this is getting very frustrating.
I can connect to the internet and browse most Web sites. My email works fine but I can't connect to websites www.microsoft , Norton is 'unable to connect to the Live Update server, check the internet connection' and my media center can't find my internet connection.
What is going on?
I have a subscription to Norton who can't find any problems. I also downloaded onecare and trojan remover, returning with a clean report.
Please help before I go out what remains of my hair.
What about FrankHello
You can access Microsoft.com, McAffee.com, Symatec.com? Thinking you have a conficker.
Check with this site
http://www.confickerworkinggroup.org/infection_test/cfeyechart.htmlAlert on the Win32/conficker virus
http://support.Microsoft.com/kb/962007Protect yourself from Conficker
http://www.Microsoft.com/security/worms/Conficker.aspxHow to remove the worm Downadup Conficker (Uninstall Instructions)
http://www.bleepingcomputer.com/virus-removal/remove-Downadup-ConfickerHow to manually remove the Conficker worm
http://www.411-spyware.com/Conficker-worm-removal#how-to-removeBDTool to remove
http://www.bdtools.NET/-----------------------------------------------
Run the malicious Microsoft removal tool, scan with Malwarebytes, Prevx to be sure you know all the
malware involved and if necessary use UnHackMe.Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows Update - if necessary, you can download it here.
Download - SAVE - go where go out you there - top - right click RUN AS ADMIN
(Then run MRT as shown above.)Malicious removal tool from Microsoft
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMalwarebytes - a scanner at the request - update on the updates tab and run whenever you think malware.
http://www.Malwarebytes.org/Here are some free online scanners to help the
http://www.eset.com/onlinescan/
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1also install Prevx to be sure that it is all gone.
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp--------------------------------------------
Also do to the General corruption of cleaning.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------
Run Malwarebytes when you can.
IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK
IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK
Close IE
IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
"(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
are bad, but some can cause your question. (Toolbars are BHO)
http://securityxploded.com/bhoremover.phpStartup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlDon't forget to do:
Logon as administrator
Start - type in the search box-> COMMAND - find on the list above - CLICK RIGHT - RUN AS ADMIN
Enter each of these one at a time and press ENTER after each
ipconfig/flushdns
nbtstat-r
nbtstat - RR
netsh int Reinitialis
netsh int ip reset
netsh winsock reset
Reset
------------------------------------------------------Here are a few rootkits if it were a question:
SpyDLL Remover - free
http://securityxploded.com/spydllremover.phpAdvanced Windows Service Manager
http://securityxploded.com/winservicemanager.phpRun the Rootkit Revealer - free
http://TechNet.Microsoft.com/en-us/Sysinternals/bb897445.aspxUnHackme - trial
http://www.Greatis.com/UnHackMe/This shows how to use UnHackme and includes a link to version 2.5 – use it as a guideline and current
available as version above is 5.5
http://safecomputing.umn.edu/guides/scan_unhackme.htmlIceSword - free
http://www.AntiRootkit.com/software/IceSword.htm
Instructions and pictorial
http://securityxploded.com/IceSword.php
Tutorial for use of IceSword
http://translate.Google.com/translate?hl=en&SL=zh-CN&u=http://soft.zol.com.CN/2004/0803/145163.shtml&prev=/search%3Fq%3Dicesword%26hl%3Den%26lr%3DRevo Uninstaller - free
http://www.revouninstaller.com/I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Unable to connect to the microsoft career site to apply for jobs
Unable to connect to the microsoft career site to apply for jobs, even with google, facebook, or linkedin
It redirects and come back with nothing invites me to reconnect
Help, please
Hello
We do not work for Microsoft.
We are mainly volunteers here.
I'm sorry, but this section of Microsoft, the Microsoft community, is dedicated to answering questions of posters on the hardware and software problems with their computers, computer hardware, etc.
This is all the information that we have.
http://careers.Microsoft.com/careers/en/us/get-help.aspx
Kind regards.
-
I tried to use www.findagrave.com for 2 days. I tried 3 different browsers. all say that they are unable to connect. No one else has a problem on this page. I have no problem to do something else. Why, throughout this site I can not connect with? I use it all the time in research. very aggravating.
original title: on a web pageWell, I tried the support page, but I already tried all that. I did a restore full back to factory settings... still cannot have only one page to load. I'll call my dsl provider this afternoon. I don't know what else to do. I can't communicate with Findagrave. I don't have a snail mail address but no phone number. But I don't think that it would be them anyway, if no one else has a problem with this web site. There must be on my end, don't you think?
I don't know what to tell you. There is no problem, it's on your side.
If you care to try it... on the assumption that your user account is damaged.
Create a different user account with exactly the same type of account > connect to it and see if you can access this Web site.Personally, I doubt that will solve anything, since you already restored your computer to factory settings.
-
How to turn the notifications by e-mail to connect VPN Site to Site on ASA?
How to activate the VPN Site to Site connection e-mail notifications?
Maybe it's possible with the event Manager?
Hi Mario
I think this could work depending on your intent:
logging list email level notifications class vpnlogging list email level notifications class vpnc!logging mail emaillogging from-address
Cordially Véroniquelogging recipient-address level notifications -
When browsing from a page of the site appears "unable to connect" Although no connection problem
When browsing from a page of the site appears "unable to connect".
Hi Helen,
Thanks for posting your query in Microsoft Community.
Unfortunately, the question is not clear, please answer these questions so that we can understand the problem and help you better.
1. which web browser you are using?
2. what site you're talking about?
3. this happens with all sites or with any specific Web site?
4. What is the exact error message you are getting?
5 have had any changes made to the computer before the show?
If you are using Internet Explorer, follow the steps in the link.
Can't access some Web sites in Internet Explorer
http://support.Microsoft.com/kb/967897
NOTE: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
We would be more than happy to help you if the steps above did not solve the problem.
-
VPN site-to-site with pppoe ADSL connection
Dear
I would like to know - is it possible to connect two 5505 ASA in VPN site-to-site with 1 site using the pppoe ADSL connection?
A (static IP) site
Site B (ADSL pppoe, DHCP)
Site has < site="" to="" site="" vpn=""> > Site B
Best regards
Alan.
Configuration of site B should be the same as all the other side than peers with static end.
The different configuration would be on Site A as he will accept a VPN to a dynamic counterpart.
Unfortunately, I have no configuration example to show you on ASDM.
Maybe you are looking for
-
After 4.4.2 update can not use WiFi &; Bluetooth togeth
After that I updated to KitKat 4.4.2 cannot use WiFi and Bluetooth at the same time. Must turn off Bluetooth to use WiFi.can you help with this problem. I have the Motorola droid RAZR maxx hd
-
M277dw MFP: Error Message "No. Fax detected" on the incoming-outgoing fax works fine
I have the M277dw MFP for my small business. I have a phone line for faxing. I can send outbound faxes without problem. I can not receive incoming however. I receive a confirmation by fax with a result of "No fax detected". I ran several times self-d
-
Note book start (XH124UA #ABA), CNU10316RL
HI, I need help on my laptop is Pavilion dm4-1160us When I turn on everything I have As is pointed out flashing bar on the top corner of the lelf page, I tried the difficult start and power with esc buttom to start menu press F2 system diagnosis evry
-
I need to replace my HD on my Pavilion a6700f.
My computer came with the installation of Vista and a free upgrade to windows 7. now that a hard drive replacement is required and Vista was originally on the D: partition of the disc that I have to ask... Windows 7 can be installed upgade disks pro
-
I bought a car charger and the wall for my video, but the clip gets really hot at the same time. Could someone please offer what to recommend, I really want to fry my clip. Thank you!