VPN works only on Windows XP using VMware Player

Similar Questions

• VPN works only on windows 7

  I have windows 7 professional 64 bit. I can't VPN works with the Iphone. I don't have another computer to try out it. Someone at - it a good guide?

  I think that the VPN is not configured on my win7. Any guide or help will be appreciated.

  OK... as test that I have connected to this free PPTP VPN service to make sure that my iPod touch VPN features work.

  http://www.bestfreevpn.com/iPhone-iPad-free-VPN/

  After configuring the server settings that I could with success to connect, check my iPod Touch IP had changed to the IP address assigned by their PPTP VPN server and I could surf the internet, check email, etc. etc.

  http://CID-25ab668da65c8fbe.photos.live.com/self.aspx/Windows%20images/iPodVPN-status-1.PNG

  http://CID-25ab668da65c8fbe.photos.live.com/self.aspx/Windows%20images/iPodVPN-status-2.PNG

  This screen, on the http://www.whatismyip.com site, verified for me as all my iPod Touch traffic was routed through the VPN tunnel to their server and back again. The reported public IP address is different from what I see of my Win 7 laptop at the same time even if the laptop and iPod Touch are vascular on the same local LAN here.

  http://CID-25ab668da65c8fbe.photos.live.com/self.aspx/Windows%20images/iPodVPN-whatismyip.PNG

  http://theillustratednetwork.MVPs.org/LAN/CurrentHomeLAN.PNG

  So getting back to your original problem, that I don't really know what is happening with Win 7, at least on my machine and its function of PPTP VPN server integrated. I'm not home now so I have no way to test this functionality with a Windows VPN client.

  However, the key is that the PPTP VPN functionality in my iPod Touch works as I expect on your iPhone. It boils down to a problem with the server.

  I suggest test you your iPhone against this free VPN server to make sure in your own mind that his work and then figure out what you want to do next. What exactly do you want to do with VPN, if you can get this to work on Win 7 PC server, IE. access to the files, remote and secure web surfing, etc.?

  Please NOTE: The free VPN service changes their password access every 12 to 24 hours and idle sessions for more than 4 hours are disconnected automatically. See the note at the bottom of their homepage.

  http://www.bestfreevpn.com/free-VPN/

  MS - MVP Windows Expert - consumer
  "When all else fails try what the captain suggested before you started...". »

• How to access Oracle Applications 11i forms using Vmware Player?

  Hello
  
  I installed Oracle Applications 11i on native OS OEL5 Server and guest OS Windows XPP using Vmware Player.Now how to access forms Oracle Applications 11i XPP Windows using Vmware on my desktop to server OEL5?
  
  Thank you to
  
  The respect of
  Rerry

  Hello

  If you mean how to access the e-Business Suite from the virtual machine, and then you just navigate to the same URL as you would normally. You may need to put the alias of the machine in your hosts file if you reference it via the name of the computer rather than the IP address.

  If you mean you want to load the form in the form designer (for example) then you will need to FTP the form from the server to the client (as you normally would), then open it in your client (XP virtual machine).

  If you want to use the workflow designer (according to your initial condition) then you must ensure that the TNSNAMES.ora file in workflow Home Builder has an entry for your instance on Linux, and then you should be able to connect to the database directly.

  HTH,

  Matt
  -----
  WorkflowFAQ.com - the independent resource ONLY for Oracle Workflow Development

  Review alpha chapters of my book "developing with Oracle Workflow" are available through my website http://www.workflowfaq.com
  Have you read the blog at http://www.workflowfaq.com/blog?
  WorkflowFAQ support forum: http://forum.workflowfaq.com

• Issue of stop start to use VMware player 6.3.0 and a .iso file

  When I power on a virtual machine using an image (Ubuntu 7.04) .iso file in VMware Player 6.3.0 or VMware Workstation 10.3.0, startup stops at certain places and does no more.

  I saw the screen below first,

  

  Then I restarted the VM and I saw the screen below.

  

  I checked the settings of the virtual machine, but have no idea of what is wrong. I don't think that there is no mistake on virtual or physical machine or version number. The .iso file is reliable as well. Could someone help me?

  I solved the problem only by changing to use VMware Player 4.0.6 not version 6.3.0. It was probably incompatibility to halfway...

• Error 0x0000007B blue screen VM boot with 32-bit Windows 2003 using VMware Converter 4.0

  Error 0x0000007B blue screen VM boot with 32-bit Windows 2003 using VMware Converter 4.0

  I want to create a virtual machine using VMWare Converter 4.0 from an Acronis True Image to ESXi Server 3i .tib backup file. The conversation seems to be working, but when I try to start the virtual machine, it begins to start, displays the Windows 2003 splash screen briefly and then fails with a blue screen with the following error:

  STOP: 0X0000007B (0XFFFFFADFD520F3C0, 0XFFFFFFFFC0000034, 0 X 0000000000000000, 0 X 0000000000000000)

  Looking through the forums I've seen this error mentioned with 64-bit Windows 2003, but no mention of 32-bit?

  Any help much appreciated.

  THX

  > Thanks, unfortunately the .tib Acronis True image files do not work with Converter 3.0.3

  You already have a virtual computer that start - it's just bluescreens - so no need to run the full convert again.

  Juist use Converter 3.0.3 to configure the virtual machine - part seemed to have failed

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm has already released a version with support for the latest version of Firefox. See http://www.roboform.com/support/news. Try upgrading to the latest version of Roboform.

• Windows 7 - using VMware installation start the DHCP server

  Original title: Question

  When I try and install windows 7 using vmware its Dungeon rather start the DHCP server and then start from the selected ISO file I selected

  

  Hello Cordy,

  Thanks for posting your question on the forum of the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  In addition, you can also contact VMware support for assistance.

  See this link:
  http://www.VMware.com/in/support.html

  Thank you

• How to create a computer virtual file VHD using VMWare Player?

  I created a .vhd file using disk2vhd which contains my drive system (a Windows 7 installation). I would like to create a virtual machine using VMware Player of this image, but I have been unable to do. Can someone help me?

  Thank you very much

  Mike

  You were quite right about the execution of my VM from an external drive USB - no problem at all.

  Today experiences confirm that:

  (a) I can run my VMS on Windows 7 and Windows 8 from an external USB

  (b) VMPlayer can create files hard greater than 2 TB in size (on Windows 7 and Windows 8 guests)

  (c) I can't reach my Data.VHDX file on my Windows 8 host

  (d) I can set up as a shared folder inside my VM on Windows 8

  (e) I can copy files from the shared folder to a drive on my virtual machine.

  Certainly, this closes this discussion - thanks a lot for your help.

  Mike

• Using VMWare Player on Bootcamp of Win7 to access the Mac OS x partition?

  Greetings,

  I'm new to VMWare, and I Fusion for Mac OSX that accesses my Bootcamp (Win7) partition.

  I recently installed VMWare Workstation 9 for Windows that includes VMWare Player.

  Is there anyway to access my Mac OS x partition from the side Bootcamp as I do when I use Fusion on Mac to access Win7?

  I see the answer go both ways, but I wanted to post on the forum to be sure.

  Thank you!

  VV5

  VMware does not support the operation of Mac OS X in VMware Player/workstation!  Also, legally virtualisables versions of OS X running in a Virtual Machine cannot be done when done in the Apple brand hardware but when done while running under OS X and for that you have VMware Fusion of VMware Player/Workstation or you violate Apple's SLA for this product.  So any help can you provided for OS X in this use of the scenarios that it would violate the community VMware operating conditions to do.

• problems installing XP using vmware player

  I used vmware for some time, but just re - install my virtual XP environment.

  My host PC is running win7pro_32bit and I use vmware player (v4.0.0 build-471780)

  When I go to start the installation (from CD using CD I used to build PCs in the past, but never in vmware), I see an error

  "CDBOOT: couldn't find NTLDR.

  I'm guessing that my winXP disk might be shot, but I can't believe (seems ok)... is it possible that I missed an obvious step?

  I have attached a log if that helps?

  Welcome to the community,

  If please define the virtual CD-ROM drive in the virtual machine for "Legacy Emulation" settings and try again.

  André

• Touchscreen driver works only under Windows 8

  Install Windows 8 on HP Touchsmart 520 is really a nightmare. Usually, the display driver installation procedure and Voltron Touchscreen product error 9998 drivers. Oddly, I managed to somehow work around this by using a different display driver (some beta-version of Intel), but it was buggy. Since the reinstallation of Win 8 I can't to install more touch screen driver. Given that the Touchsmart series sells on its touchscreen capabilities and given the fact that HP relies on the Microsoft OS is not only slightly irritating that HP has so far not been able to provide drivers of devices that work well with Win 8 Release Preview. What solution do you offer me? Wait? Back to Win 7?

  The pilot (Nextwindow Voltron Touchscreen) updates automatically after the installation of Win 8 RTM when you only run Windows Update routine. At least in my case it did, and it works fine.

  HP Touchsmart 520, win 8 RTM x 64 Pro (Volume, active key by the KMS server; in the case that sounds Chinese to you: ask Uncle Google; this German page has all the information you need: http://www.boerse.bz/hard-software/microsoft/windows-8/1168581-windows-8-rtm-final-build-9200-informationen-und-diskussion.html).

• Simple pass works only on Windows 7 pro standard user

  I looked through countless questions simple pass and found no clue.

  I'm used to simple passage, recognizing the need for a u/p that it registers the new website or offers for me to slide my finger for an existing installation.  This is nothing.  It is runing as I see in taskman.

  Recently, I've reconfigured my logon as a standard user.  I can't see exactly that as a starting point, but that is the only change that I can remember.

  Product number: A5F92AV Windows 7 Professional 64-bit Service Pack 1

  simple pass 6.0.100.276

  Jess,

  I might suggest that the account on the other is the fix.  The idea of alternative / new account was first suggested 06/11/2013 and now once again in Lil_Lisa27 (thank you, Lisa!).  Everything you've tried, it's the only solution that has accomplished the goal: get SimplePass working on your Windows 7 operating system.

  You can use the transfer tool to move account data or you can simply move to the new account, and then set the ownership and permissions.

  You can also continue to seek a solution based on the knowledge that it was discovered the underlying problem to the environment into account in this particular account.  Once you have your new account to work the way you want, you can certainly leave the account 'broken' in the system and continue to push what you think of new things to try to fix the SimplePass database.

  Be sure to create a Restore Point before you make changes to the program or anything outside your account.

  Good luck!

• Intel Wimax 5350 works only with windows 7/t400

  As someone who uses the Server 2008 on my desktop, when I received my t400 a few days ago I hesitated at the idea of using vista.  so I decided to download and install windows 7 64-bit (Vista 32 bit... I did an install own good... I think).  I haven't heard of anyone having problems with the drivers wireless in windows 7 and, indeed, intel States on their site that windows 7 will automatically install the drivers for the card 5350 wireless.

  Unfortunately, during the installation of windows 7 was complete the drivers were not installed and I don't have access to the internet.  I therefore had to take my Office Wireless usb adapter, then plug it to access the internet.  Windows Update has not fixed the problem.  so I installed the visa of intel 64-bit drivers and windows told me that my wimax device has been recognized, the drivers have been installed, etc.

  except the wireless card still does not work!  He is currently under listening network cards as area network/2 connection cable unplugged/intel wimax link 5350.  I do not understand... should not it listed as being a wireless network connect as is my usb adapter?

  I think that the problem might be that in Device Manager, I don't have a driver for the controller network, serial port pci or pci simple communications controller.

  It is quite frustrating and I really regret not putting more thought in this installation of windows 7.

  Thanks for the help

  I have a T400 with 5350 Intel and Windows 7 x 64, I downloaded and installed the

  Intel PRO / Wireless and WiFi Link drivers only for Windows Vista * (3298 KB) and the

  Intel® utility connection WiMAX PROSet/Wireless for Windows Vista * 64-bit (9206KB) from the Web site below.

  http://Downloadcenter.Intel.com

  Furthermore, my "Intel(r) WiFi Link 5350' and ' Intel WiMAX Link 5350" listed in the "Network adapters" category, I have not any category 'Wireless Network Connect' at all. "

  I hope this helps!

• DeskJet 722C works only with Windows 7

  OK, so I applied the DJ_Patch as described. (See http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-and/Deskjet-710-720-810-820-100-Series-prin... ) I have Windows 7, 64-bit and a HP Deskjet 722 C printer.  Tried to print the test page, but received the error from the printer.  Tried to add a printer, you are looking for the 722C, but it is not on the list, even tried to do Windows Update to search for my printer.   Tried to restart, which did not work or the other.  Still get error printer.  I appreciate any other suggestions.  BTW, the printer is connected via a USB to parallel port cable.

  My HP Deskjet 722C now works!  I spent several hours trying different things only to find out it was the cable use to connect the printer to our new computer.  He is there not a lot of info on the package of cable but if you watched closely he said it worked only with Win XP, me and Vista.  Who would have thought that the cable wasn't working with some BONE... me!  Once we went and bought a new cable ($40, Ouch!), we were running a few minutes.  I don't know that a cheaper cable is available online.

  I wanted to post this in the hope of saving someone money, time and frustration on the other.

• ThinApp 4.6 for my apps works only on Windows 7.

  So I have a few thinapp had applications that have been implemented with 4.5.  Now these apps works on XP and Win 7.

  I advanced and used re-edit the link update the exe and msi, and now packages do not work in Windows 7.  They work fine on WIndows XP, but Windows 7 displays an error "xxx.exe has stopped working".

  One of the applications is a trakcing ticket helpdesk system;

  The MS error is:

  -

  ---

  Signature of the problem:

  Problem event name: BEX

  Application name: CallLog32.exe

  Application version: 0.0.0.0

  Application timestamp: 435937c 7

  Fault Module name: StackHash_7b0b

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception offset: 021dbc5f

  Exception code: c0000417

  Exception data: 00000000

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  Additional information 1: 7b0b

  More information 2: 7b0b67a2d52e46c62cdf0bb485c0db15

  Additional information 3: e229

  Additional information 4: e2294ce76e8796e1670be2d391dac72c

  Read our privacy statement online:

  http://go.microsoft.com/fwlink/?linkid=104288 & clcid = 0 x 0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  -

  ---

  There are entries in the log of errors:

  -

  ---

  -

  ---

  Any errors detected-

  003643 00000000 000021b 0 GetModuleHandleExW dwFlags = 0 fname=C:\Windows\system32\rpcss.dll-> 0 (hModule = 0 / "not found")

  b 006313 00000000 000021-0 Module OLEAUT32.dll already loaded by the system, but loaded second isolated virtual copy

  -

  ---

  If someone has no indication as to what can be produced, I would greatly appreciate it if you can give me some possible solutions to the problem.  Once again, if I use 4.5 that works.

  Thank you

  Larry B.

  Have you tried taking in 4.6 instead of relink'ing?

  Or try to remove the file oleaut32.dll from your package and rebuild according to this blog post http://blogs.vmware.com/thinapp/2010/08/captured-on-xp---running-on-win-7.html