VPN3k and communication inter-talks - need the official position Cisco

Similar Questions

• Compilation of a Lightroom Plugin and how to add to the official Adobe Plugins Site?

  I hope I am in the right place.

  I worked on a plugin for Lightroom, developed on LR 5.6, using the SDK 5

  I'm at the point I would compile the plugin for the distribution and asks the voice of experience:

  (a) what version of the compiler to use LUA. 5.1.4 I saw mentioned in various places, but do not know if it is "new".

  (b) switches/configurations, I need for maximum compatibility between both OSX and Win. Provide an update file (for all) seems best for me, if possible.

  (c) any ways to maximize compatibility with older versions of LR. Obviously preferable to focus on current versions, but if it's simple enough to include older versions so why not not.

  (d) any other experiences to avoid!

  What I understand, it is better to compile 32-bit LUA, because it will work on 32-bit and 64-bit OS

  In ADDITION, it may just be a link, but I'm having trouble finding where to add the plugin on the official Adobe site. Google seaches for things like "adobe lightroom plugin" do not seem to end up where I need to be. I don't know there is a registration page, only I could not find it... probably be dumb, wouldn't be the first time...

  Thank you very much for everybody takes the time to answer, and I am grateful for sharing you your experiences, I know, they are often the result of many hours of trial and error!

  See you soon

  Charism of Don

  I used 32-bit "LUAC/Luhe"5.1.4 for LR 3-6, first on Windows 7 than OS X without problem.  I can't remember where I got it from.

  (b) switches/configurations, I need for maximum compatibility between both OSX and Win. Provide an update file (for all) seems best for me, if possible.

  No switch; a typical call looks like:

  LUAC/LUHE o anyfilter.lrplugin/AnyFilter.lua AnyFilter.lua

  (c) any ways to maximize compatibility with older versions of LR. Obviously preferable to focus on current versions, but if it's simple enough to include older versions so why not not.

  Regarding compiling, I don't know of any issue to worry about LR 3-6.

  What I understand, it is better to compile 32-bit LUA, because it will work on 32-bit and 64-bit OS

  Right.

  In ADDITION, it may just be a link, but I'm having trouble finding where to add the plugin on the official Adobe site. Google seaches for things like "adobe lightroom plugin" do not seem to end up where I need to be. I don't know there is a registration page, only I could not find it... probably be dumb, wouldn't be the first time...

  Creative modules Cloud site is here: https://creative.adobe.com/addons. ( Merchants to change these names over the years: extensions, plug-ins, snap-ins, modules,.)

  However, since Adobe replaced their 'classic' with the Add-ons site Exchange, I don't know anyone here who has successfully published a true LR plugin (as opposed to presets beams) and made easy for users to download and install. You can find the experience of others in discussions in this forum.  Almost all of the widely used plugins my knowledge to avoid the Add-ons site. But if you try it and it works, thanks for posting your experience and your recipe here.

• Oppose multiple positions and colors - how to keep the chosen position even when the color change?

  I have a makeover game where you can change the position of the hands of my model and also the color of the skin. In a clip with a skin color, there are a all hands possible positions. But when you click to change the color in the hands of the jumps to the first keyframe position, just not to the position previously selected. How can I handle this, so that regardless of the color of skin chosen, in the hands of the post to be selected and the movieclip jumps to the first keyframe with the first position of hands? Or y at - it another way to tie the color of the skin and the multiple positions of the hands, but in such a way that they are not affected by the other?

  I think I understand what you did and what is the problem.  Whenever you change the movieclip of hands to be a different color, you must change the hands.hands movieclip to be on the same image as in the other color.  Keep track of which hands.hands set the framework you're and assign this anythime you change color...

  _root. Doll.Hands.gotoAndStop (1); 2, 3, etc.

  _root. Doll.Hands.Hands.gotoAndStop (positionFrame);

  Other approaches to this.

  If you use matte colors for hands, one-way ticket would use the code only to recolor the hands instead of using movieclips/frames in this way, you don't have to change the movieclip of hands for different colors, which means that you don't need that to a movieclip for positions... you essentially just recolor the hands positioned mc.

  Another approach would be to have all your main color mc in the same framework and control their visibility.  Whenever you change the position of the hand, you change all.  When you change the color, do you first all the mc color is invisible, followed immediately by the visibility of the mc of the selected color.

• If I domn can't plug my head my lop top phone will make a screeching very loud and you can talk through the head phone

  When I turn on my computer I hear a high ground, but it disappears if I plug earphones in. Why is - this?

  down (or disable) your microphone

• Installation of Windows XP tells me that I need the file "igxpmp32.sys.

  I install windows xp on a laptop given to new, I bought because I just couldn't connect on it.

  During the installation it stops and tells me I need the file 'igxpmp32.sys' I seek but can't find. Help, please

  original title: how to find "igxpmp32.sys.

  Hello, Tona,

  Igxpmp32.sys file is located in the folder C:\Windows\System32\drivers.  This is the accelerated Intel graphics drivers.  Try Intel.com.

  http://www.Intel.com/content/www/us/en/search.html?keyword=+igxpmp32.sys

  You can also find the rom installation.

• The ACE IPS Cisco and Cisco ASA AIP - SSM (IPS)

  Is there a difference between the features offered by the Cisco ACE IPS and Cisco ASA AIP - SSM (IPS) devices?

  Can we do without Cisco ASA AIP - SSM (IPS) of 'only' configuration/implementation Cisco ACE IPS.

  Cisco AVS/ACE emphasis on commissioning and to secure web-based applications. IP addresses do not focus on just the web applications and trying to get the multiple layers of the OSI stack. Consider the IPS as a general practitioner and the ACE/AVS as an eye surgeon, or something :)

  Here is the response from Cisco itself:

  http://www.Cisco.com/en/us/prod/collateral/modules/ps2706/ps6906/prod_qas0900aecd8045867c_ps6492_Products_Q_and_A_Item.html

  Q: how is Cisco AVS Firewall application differs from an intrusion prevention system (IPS)?

  A. IPSs are solid solutions of protection against targeted attacks of known vulnerabilities in major platforms such as Windows, Solaris, Apache or Microsoft Internet Information Services (IIS). Cisco AVS excels to protect against targeted attacks Web sites or enterprise applications. These applications can be built custom internal applications or software vendor. Signatures and security patches are generally not available for these types of applications, and building these security levels in each application, it would be almost impossible.

  Q: how is Cisco AVS Firewall application differs by a network firewall?

  A. The Cisco AVS 3120 and Firewall network such as the Firewall of Cisco PIX® and Cisco ASA 5500 Series Adaptive Security appliances are complementary products. The application Cisco AVS Firewall secures Web applications; excellent network in the network security firewall. and the Cisco AVS provides defense in depth for Web applications.

  Firewall network apply policy networks, IP addresses and ports; they have a wide range of application for many different protocols layer features. The firewall can and will be deployed in many locations, including the edge, edge of the enterprise network, branch, etc. Cisco AVS imposed the policy on data HTTP as URL, headers and parameters. Cisco AVS is deployed in the data center in front of Web applications

  Concerning

  Farrukh

• Copy & and flip or flop on the axis of the object

  Is there an easy way to have a geometric shape, let's say a box which has the thickness of the line 1/2 point, replicated (mirrored) left to right on right axis is... so that the vertical lines where she turns the other overprinting EXACTLY? That is to say, you do not have a vertical rule at the centre which is optically heavier than all the other rules in each box. I have a number of forms to do and allows to adjust manually the horizontal position of these elements is quite tedious. When I use the mirror panel buttons, objects are contiguous - they do not superimpose on their common edge. Normally I would put up a picture, but all has rounded corners boxes.

  Thank you.

  

  Try using the command move (double click on the selection tool) to open the dialog box move, with the copy button. In doing so, move the width of the rectangle, but subtract the width of the line.

  To make it easier test, I made a square of 1 "x" 1 with a PT run. 2.

  In the dialog box move, I copied the place "1 in French - pt 2»

  

  

• Base of screen is stuck in the down position

  I posted this earlier today and for some reason any, that it has been deleted. (I know it's there an hour after I posted it, so I'm not sure why it was deleted).  Anyway. I have a screen Dell UltraSharp 2405FPW monitor and today by chance, I pushed the monitor down and clicking on it in the locked position.  Until today, I wasn't even aware that he had that.  Long story short I fell on the dell site and discovered that you have to press the Unlock button.  Unfortunately, this does not work on my stand.  The button pushes into a fine, but the base of the monitor will not spark.  I use the two landscapes and modes Portrait every day and really need the stand to get back to the top, so I can rotate.  With all this down, it is almost impossible to rotate and when you do you must rear angle as far as it goes which makes it useless.  I went on Dell Chat and was essentially told too bad and I need to find someone to fix it for me or buy a new monitor.  Then he me the unplugged.  Note I was not angry or abusive up to this point, I was just trying to get it fixed.  Needless to say, after he abruptly ended the session, I was less happy that I almost lost my morning trying to solve this problem (only 30 minutes maximum was with the guys from cat). Anyway. The system is a XPS 600 and is still under warranty for another year.  I really want to spend another $600 on a new monitor just because the support is stuck, but I really need to be able to go back and fourth between portrait and landscape.  Does anyone know any way for me to fix this or get Dell to help me solve this problem? Any suggestion would be appreciated.

  Jason

  When you encounter any gluing or jam session with the base of the screen, perform them following operations =

  While pushing the button locking/release on the rear side of the stand, press down on the top of the screen to the ground, then gently pull the screen up.

• Cannot move the switch to the required position.

  Hello! Please help with my small building bad ui)

  I have a tab panel and a small button. And I can't set the correct position for this control. I enclose a photo with explanation and copy part of my code definition panel.

  function buildUI (thisObject)

  {

  var myPanel = (Cetobjet instanceof Panel)? CetObjet: new window ("palette", "Myscript", undefined);

  myPanel.orientation = "column"; // ?

  myPanel.alignChildren = ['fill', 'top'];

  var buttonAbout = myPanel.add ('button', [0, 0, 20, 20], '?');

  buttonAbout.alignment = ['right', 'top']; //?

  tabbedPanel var = myPanel.add ('tabbedpanel', undefined, ");

  tabbedPanel.orientation = "column"; //?

  tabbedPanel.alignChildren = ['left', 'top'];

  ...
  

  

  How do I place my control positions needed?

  PS: Sorry for my bad English

  Try changing:

  wmyPanel.orientation = "column"; / /?. orientation = "stack";

  TO

  myPanel.orientation = "stack"; // ?

  At least the code below gives this Interface:

  

  var w = new Window ("dialog", "UI", undefined, );
  
  w.orientation = "stack";
  var tpanel = w.add ("tabbedpanel");
  tpanel.alignChildren = ["fill", "fill"];
  tpanel.preferredSize = [300,300];
  var base = tpanel.add ("tab", undefined, "Base");
  var work= tpanel.add ("tab", undefined, "Work");
  var use = tpanel.add ("tab", undefined, "Use");
  var buttonAbout = w.add('button', [0, 0, 20, 20], '?');
  buttonAbout.alignment = ['right', 'top'];
  w.show ();
  

• Inversion of the particles to the initial position

  Hello guys Im doing a video with my logo. My logo will explode in particles and I want to reverse the initial position after a while. How can I do?

  Thank you

  You use including on red giant Trapcode? If so, there's a physical time factor. If you put that in the negatives, it reverses the particles from where they came. The handy thing is that you can have a camera movement continue particles to reverse.

  If you use one of the effects included particles, precompose it and use the time remapping on the precomp effect to make the particles to reverse.

• Pop-up window does not show in the right position in the sensitive design (was: place cursor object)

  Hello world

  I create a demonstration of the software using screenshots and leading edge.  There are pop-up windows in this product when the user places the mouse over a row of data and a popup appears at the mouse position with more information on these data.  I used

  SYM. $("myObject") .css ({"location": "absolute", "top":e.pageY, "left":e.pageX});})

  and it works fine until I set stage for 'sensitive' or I scroll to the bottom of the page to access the data rows.  When this happens, the popup appears in the distance of the mouse.

  I'm not a coder strong, but anyone know how I can get on board an animation to recognize the true position of the mouse on the screen and then specify the popup to appear there?

  Any advice would be appreciated.

  Thank you

  Randy

  Try the code in this example - Dropbox - mouseclick.zip. The phase shift is not supported in the code, let me know if that is necessary for your use case.

  DIA-

• 25/07 last I bought with credit card the Acrobat to word converter. More than 24 hours then passed and I have no communication with you or the service that I bought. Please, I need an answer. Thank you.

  25/07 last I bought with credit card the Acrobat to word converter. More than 24 hours then passed and I have no communication with you or the service that I bought. Please, I need an answer. Thank you.

  Hi ruit78694630,

  Please try to use the service to export it to PDF format in line using your Adobe ID https://cloud.acrobat.com/exportpdf & check if its working or not.

  Otherwise, you can contact our support team here, contact customer service.

  Kind regards

  Nicos

• I have no interest in talking to the Adobe community. I want Adobe to take the money I gave them everything and give me a version of Acrobat Reader that works on a Mac. How can I get a real representative of Adobe to handle this case? This breath.

  have no interest in talking to the Adobe community. I want Adobe to take the money I gave them everything and give me a version of Acrobat Reader that works on a Mac. How can I get a real representative of Adobe to handle this case? This breath.

  Just to clarify: there is no product called 'Acrobat Reader Standard' or 'Acrobat Reader Pro "; three cloud paper products

  • Acrobat Reader (free) DC
  • Acrobat Standard DC
  • Acrobat Pro DC

• I'm in Belgium in fact and I need to download the real version of Photoshop, but I can't. I was on the trial version for 60 days but now I am a professional designer and do not know why I can not buy the official Version.  Could someone help me?

  Can someone help me, how to download the official version of Photoshop in Belgium on the Adobe Web site?

  Hello

  Please see the pricing and membership creative cloud plans | Adobe Creative Cloud to place an order for the CC plan.

  See please download and install Adobe Creative Cloud apps to download.

  Kind regards

  Sheena

• FIrefox version 29: need an OFFICIAL for the return method reload button on the left side

  Are there addons that are OFFICIALLY supported and maintained by mozilla? Or could there be some hidden options I can change? Or perhaps the command line parameters? Or at least a confirmation that this issue has been taken seriously and will be resolved in the next version?

  Please don't suggest third-party addons, applications, themes or whatever. If I cared to install one of those, then I can just as easily download chome.

  You can use this code as well in the userChrome.css file, but does not move the button reload at the far left in the location bar container

  • http://userstyles.org/styles/101143/Firefox-29-left-reload-button.CSS

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  #urlbar > toolbarbutton {
      -moz-box-ordinal-group: 0;
      padding-left: 10px;
      border-right: 1px lightgrey solid;
      padding-right: 5px
  }