vRA7 DNS mix, connected to the internet

Similar Questions

• My PC does not connect to the Internet, a window opens and says DNS server does not respond.

  Original title: programs network networking Internet site Internet Site Web Web Site URL of the network

  My PC does not connect to the internet, a window opens and says DNS server does not respond.

  Hello

  Follow the steps in the article mentioned below and check if it solves the problem:
  http://support.Microsoft.com/kb/314095

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Receive dns error message when you try to connect to the internet.

  I'm trying to access the internet but I can't and I am connected but whenever I try to open a web page to his not to come but keeps on saying dns server responds not... How to solve this

  I can't access any web page either and I am connected but cannot access web... troubleshooting report indicates that the dns server is not responding.

  Hi sandyrb,

  1. What is the error message when you try to access the internet?
  2. You use Internet explorer to access the internet?
  3. Did you the latest changes on the computer?
  4. What is the type of internet connection you use?
  5. You have security software installed on the computer?
  6. How do you know that the computer is connected to the internet?

  Method 1

  Check if the problem persists in mode safe mode with network mode and post back with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If the problem does not persist in the safe mode with network, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 3

  If the previous step fails, then reset TCP/IP on the computer and check if that helps.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  How to troubleshoot connectivity TCP/IP with Windows XP

  http://support.Microsoft.com/kb/314067

• DNS error - IE cannot connect to the Internet - Windows XP SP1 :(

  I'm trying to help my brother. We have a Dell Dimension 3000 running Windows XP SP1. The computer has a virus, and a clean installation was completed. That is why, it is show SP1 now that those were records. Everything seems to be OK until trying to connect to the Internet (there's currently IE6). From message which can not find the DNS server.

  I've done several things already including cleaning winsock and winsock2 and reinstall TCP/IP. Manager of network devices is here. I get a ping to the IP address 169.meta XXX but no ping at all outside the site.

  I went into Internet Options menu. I'm lost what to try next. Help!

  Thank you.

  Joelkaghami,

  Ok. Let me clarify a point. My brother lives in a different House, further away from me. I have the Dell Dimension now home trying to get updated, he had a virus and system has been reloaded. But he was only SP1. I know it will take forever to download and update the machine through dial-up and the disc, he got the ISP did not recognize IE6.

  So, to help my brother, I brought the computer to my house I have a DSL network and I was going to the network it and then do the automatic updates to update the system here and then give it to him. However, I could not the computer to communicate with my network.

  OK, that makes more sense to me; Please specify.

  In the meantime, I downloaded the SP2, SP3 (still need to install this one as stated above) and IE8 on the site of MS. I have have updated the computer, but still can not communicate with my network. And that is why I am asking about the modem ISP connection. I thought just update with SP3 and then ship back to his house and let him try the ISP software. It might just make him go.

  Good.

  In my view, sp3 includes a newer IE, but I'm not sure.

  Anyway, if you want you can download the updates, and then copy them to the dell.

  1. go on a computer that can go on the internet.

  2. download the updates on the hard drive.

  3. copy the updates to the dell via USB key, cd, dvd, etc.

  Here is a link to download a newer IE:

  http://www.Microsoft.com/Windows/Internet-Explorer/worldwide-sites.aspx

  Here is a link to download the sp2:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=049C9DBE-3B8E-4F30-8245-9E368D3CDB5A&displaylang=en

  Here is a link to download the sp3:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  Here is a link for the updates (you won't have it):

  http://support.Microsoft.com/kb/322389#tosp3

  So that's the story. Sorry if I confused you sooner.

  No prob.  I really wanted to hear that the dell works and can get on the internet.

  If I helped let me know!

• Unable to connect to the internet, the error message ' primary DNS server does not and remote Firewall can block connection.

  Original title: Internet connectivity.

  Internet connectivity.  I can't connect to the internet from the computer at home.  Get the message "primary DNS server is online but doesn't react don't not to connection attempts."  Remote Firewall might be blocking connection.  Name of the filter GUIID mfe is connect-legend-v4.  McAfee Firewall is enabled.  Turned it off temporarily with the same result.

  Hello

  Did you change on your computer before the show?

  Follow the steps mentioned below:

  Method 1:

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2: Try resetting the TCP/IP stack.
  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself

  How to reset the Protocol Internet (TCP/IP)

  http://support.microsoft.com/kb/299357 .
  If the same problem still persists, then try the next method.

  Method 3: update the network driver.
  Steps to update of network driver:
  a. click the Start button.
  (b) in the search box type devmgmt.msc and then press ENTER.
  c. Select the network card device and right click on it
  d. now, select Properties.
  e. in the Properties window, on the driver tab, click Update driver.
  f. after the installation of the updates, restart the computer.
  For more information visit:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly.
  Method 4: Definition of obtaining DNS on automatic

  a. Click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  i. Repeat steps for Internet Protocol version 4 as well.

• Unable to connect to the Internet error message, "(serveur DNS) does not". "

  Original title: connection to the Internet.

  I am really a novice in computer science.   The wifi signal is strong and I'm connected to the internet, but I can not connect or when I do connect it falls to me as soon as it connects.  Where is my problem?   the only statement I received is that the computer is configured correctly, but the device or resource (DNS server) does not.   Can anyone suggest what to do next?

  Hello

  This problem may if the router is not configured correctly or if the TCP/IP settings are incorrect.

  1. What is the brand and model of the computer?

  2. when, exactly, you get this error message?

  I suggest you try the procedure described in the article and see if it helps.

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7
  http://support.Microsoft.com/kb/2779064/en-us

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Primary DNS server lost, unable to connect to the internet

  I use an internet stick prepaid at home, even though on my screen, it showed that I had the internet connection that I could not connect to the internet than problem solver was told that he could not find the MAIN DNS SERVER?

  Hi Gregory,

   
   
  1. What is the brand and model of your internet USB Stick?
  2 have you made changes to your computer recently?
  3. you receive an error message?
   
  I suggest you to follow the steps and check if it helps.
   
   
  Method 1: Follow the link and check if that helps.
  How to troubleshoot network connectivity problems in Internet Explorer
   
   
  Method 2: Reset the sock of TCP/IP and check if this may help.
  How to reset the Protocol Internet (TCP/IP)
   
   
  Note: This link is applicable for Windows 7.

• I am fully connected to the Internet, but my DNS server is not responding. How can I connect otherwise?

  I am fully connected to the Internet, but when I click on my home page and even several other pages, including Windows Live Mail, I get an error message that my DNS server is not responding. How can I work around this problem and to connect to the Internet anyway?

  You want to be sure that you use the right setting for your DNS server.  You can move this in your browser using the digital URL for the what you want to access web sites.  You will find them by using the PING command at the command prompt.  Hold the Windows key and press R.  Then type CMD and press ENTER.  Then enter for example to get the address of the web site of MS PING WWW.MICROSOFT.COM.

  Unless otherwise directed by your Internet service provider, you want TCP/IP settings to "obtain an IP address automatically" and "Obtain DNS server address automatically".  To do this click Start-> Control Panel-> Network Center and sharing-> view status.

  Then click on properties.

  From there, click on Internet Version 6 Protocol and properties.

  Click on the two radio buttons to "obtain an IP address automatically" and "Obtain DNS server address automatically".  Click OK.

  Then click Internet Version 4 Protocol and make the same changes in what concerns the version 6.

  I hope this helps.  Good luck.

  Good luck.

• Internet connection problem; A few days ago, my computer (Windows 7 OS) stopped connecting to the internet. DNS

  A few days ago, my computer (Windows 7 OS) stopped connecting to the internet. When I troubleshooted, it produces an error of "your computer seems to be configured correctly, but the device or resource (DNS server) does not. I Googled it and tried a lot of things that have been suggested - flushing the DNS, reseting the TCP/IP, etc... None of them worked. At the end of the day, I did a restore of the system to a restore point a few days before starting my computer having these problems and then it started working again. But whenever I have to stop and restart my computer, the problem happens again. Any help as to what could be the problem or how I can fix this problem would be much appreciated!

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

• Unable to connect to the internet... anything fighting the firewall/ip address and DNS-everything is ok side suppliers... Help

  While working on the internet, all of a sudden we lost the connection and have not been able to return error response "Impossible to connect to the internet at this time..."...

  State of the network enabled and he showed limited/no connectivity-one firewall

  everything reset, contact the vendor, they reset the ip address has been assigned, I see ip address assigned, we show connected under lan... but nothing local.

  YEST reset us the computer to an earlier date... still does not.

  has run a diagnosis of network...

  Areas failed.

  By default outlook express Mail, incoming mail server... ping request could not find the mail.q.com of the host. Please check the name and try again

  also

  outboundmailserver smtp.q.com ping could not find host try again.

  Defaul outlook express default news unconfigured

  Internet not configured web proxy

  Hi MarlaAZ_67,

  1. What type of internet connection do you use?
  2. Did you the latest changes on the computer?
  3. What happens when you try to connect using Internet explorer?
  4. You have security software installed on the computer?

  Method 1

  Check out the articles below and try the steps mentioned, check if it helps.

  You receive a message "Limited or no connectivity" on a computer that is connected to the Internet by a DSL modem or a modem cable after installing Windows XP Service Pack 2

  http://support.Microsoft.com/kb/892896

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   

  Method 2

  If the previous step fails, see if the problem persists in safe mode with network mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 3

  If the problem does not persist in safe mode with network then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Unable to connect to the internet. Computer says Server DNS does not

  I have a Dell Studio with Windows 7 Pro. I turned on my computer and I see that my without wire is connected, but I can't access the Internet. I checked to see the problem and I get a message saying that my DSN does not. I am connected to the Internet via the wireless thur my phone and I have no problem, it's only the thur my laptop. What can I do about it? I tried to restore the computer to a point when it was last working properly and it worked for a few hours, but as soon as I closed and logged on to the computer, I had the same problem. What can I do? Thanks in advance.

  PS I'm not very good at technology stuff, simplification of the way to solve would be so great!

  You have McAfee?  McAfee has been updated at the same time as the last batch of updates from Windows 7 and it seems to be the cause of this problem for most, if not all, users.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  - - - - - - - - - - - - -

  If you do not have McAfee then Windows update than kb2705219 can also be a cause as the uninstall that appeared to solve the problem for some users [but I'm not particularly convinced by this]. To uninstall an update - control panel, programs & features, [left side of the window] see installed updates. Wait until the system has finished the research for the list of updates. Select update required, then right click and Uninstall.

• iPhone cannot connect to the Internet via time capsule

  I have a current execution capsule 7.7.7 time. IPhones in my house can't get internet service when it is connected to the time capsule. My iPad, I tap on it now, can get internet time capsule service. My Mac can connect. I restarted the capsule of time with my modem cable many times. My passwords are correct.

  I also have a smart Vizio TV that does not connect to the Internet. This is true with wifi and also with a wired connection to the time capsule.

  I don't know what the cause of the problem. Any help will be appreciated.

  He has worked in the past and now could not or never worked?

  Apple routers can sometimes decide autonomously switch to bridge mode. If your cable modem is not a router, you MUST have the apple router... TC in your case DHCP and NAT mode.

  If you have not done before you reset the TC at the factory and re-do the installation. Here are my recommendations.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  Then redo the configuration of the computer that you want to use for TM using Airport utility.

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the wireless is still an issue defined wireless names like TC24ghz and assigned the 5 GHz other name... eg.TC5ghz.

  Finally, use fixed channels in 2.4 ghz... try 11, 9 and 6, in that order.

  (leave the security for a few minutes and see if that makes a difference).

  For iphone and TV with problems in your Setup program ensure that the TC is NAT and DHCP... try to use a different such as google public DNS 8.8.8.8 and 8.8.4.4

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  ** 3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC.

  Ignore this point if you don't understand it... after the return if you drop questions.

  4. be sure that IPv6 is set correctly in the computer. IE link-local only for ethernet or wireless depending on whether you are using. Car is not good enough.

  Tell us which modem cable, you have, make and model please?

  The TC has problems with some popular brands... one of the SB series a modem port is malfunctioning.

• Airport utility: green points on the AirPort Extreme & Internet; Mini Mac does not connect to the internet.

  Airport utility shows green points on the AirPort Extreme and the Internet, but my my Mac mini does not connect to the internet. IPhones and 2 portable Windows connect very well, and see all the devices on the home network. The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem. I tried to stop and things start back up as if the installation of the internet for the first time. No joy.

  The airport connects using DHCP in Bridge Mode

  The router address is 192.168.80.1

  Address IPv4 is 192.168.80.2

  DNS server is the same as the router, but grayed out

  Mac Mini IPv4 Address is 192.168.80.3

  IPv6 automatically configures

  Also updated the firmware of the airport; no change.

  ISP guy was friendly but puzzled. He started at the top floor level Tech, so I do not know when I hear back.

  Any ideas to fix?

  Thank you.

  Post edited by: en maschera

  but my my Mac mini does not connect to the internet.

  The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem.

  Hello

  Network preferences may be damaged.

  Open the Finder. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  / Library/Preferences/SystemConfiguration

  Click OK, and then move all files in the SystemConfiguration folder to the trash.

  Restart your Mac. See if that makes a difference.

  Your Mac will generate a new SystemConfiguration folder for you.

  Then open AirPort Utility located in HD > Applications > Utilitiies

  Make sure that both Internet and Extreme are green.

  

• Time capsule does not connect to the Internet! Help!

  I bought my own personal modem (surfboard SB6121) and activated with Comcast. I connect to my modem via an Ethernet cable and it works perfectly. But when I connect the modem to time capsule, I can't connect to the internet. I have already restored it and still nothing. The light blinks orange and 2 notification messages I get are no internet connection and no DNS server.

  anything else I can do?

  Apple routers have known problems with some modems... which you have chosen the second worst... SB6141 is most noted as problematic, followed closely by SB6121.

  The question is the more remarkable with the airports of model AC... If TC or AE.

  The perhaps impossible question of fixing...

  First of all turned off, looks that you can not be Exchange to the customer or to the router modem correctly.

  When swap you from a computer directly connected to the TC you MUST turn off the modem for about 15-20 min... you do this?

  Otherwise, it's what it takes...

  If you have already done this... Sorry it is simply the question of compatibility and will not work.

  Are you IPv6 zone you define IPv6 properly...

  See http://mydeviceinfo.xfinity.com/download.php?file_id=35

• Unable to connect to the Internet my Satellite L300-1 to 6

  Hello

  I have a problem with my Satellite L300-1 to 6. When I try to connect to the internet I plugged taking LAN my slot for LAN card and when the identification process of the network in "Network and sharing Center" to the State of the connection write "Unindeficated Network" and I cannot access the internet...
  And this is happen when I use automatic receives the IP parameters... ?

  When I try to solve this problem with the manual configuration TCP/IP settings in the status bar indicates that I have an internet connection but when I try to open the WEB site I see the error message «...» CAN NOT COMMUNICATE WITH THE SYSTEM (DNS).

  Please explain to me how to fix this...?

  P. S. The network on my other PC works normally... ? On my L300, I use Windows Vista Home Premium SP2 and on my other PC, I use Windows XP Pro... ? !

  Hello

  Usually, the WLan router supports a range of IP addresses and everything should be set to automatic.

  In my opinion, you should first check the settings of the WLan router.
  Take the router manufacturer news and read the manual of the router how to set up the router.

  After the router has been configured correctly, you should go to connections-> LAN (local network connection) and need to access the properties of the TCP/IP protocol.

  Here, you must make sure that the IP address and DNS are set to obtain an address automatically

  That's the whole secret.