vRA7 RHEL 6.6 Blueprint / LDAP integration

Similar Questions

• ACS 4.1 - LDAP integration

  We want to use ACS as raduis server and use it to authenticate the VPN users

  Remote access VPN user--->---> ACS v4.1---> LDAP ASA5510

  ASA is already configured for the VPN, I'm a newbie with ACS. Can someone explain how to configure ACS as radius server and integrate it with LDAP.

  When a user enters his user name and password, the SAA should send that ACS and ACS should compare to LDAP.

  Thank you

  How to configure ASA to Radius configuration and VPN authentication

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00808c18ff.shtml#CLI

  How to configure the ASA on ACS as a radius client:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00808c18ff.shtml#ACS

  Check the authentication Test between ASA and ACS

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00808c18ff.shtml#Veri

  ACS and the LDAP integration database

  

  After that set the host name (such as the LDAP server's IP), Port 389 and Admin username and password.

  Kind regards

  Jousset

  The rate of useful messages-

• Easy VPN with LDAP integration

  Hello!

  Currently I have an EASY VPN server on a Cisco 2911 with LDAP integration to authenticate the user.

  Everything works well except for one aspect. When you try to connect to the VPN (IPSec Client), the user is prompted for the credentials that are in this case their domain credentials. When the user places the identification information is immediately invite you for it again and again for about 1 minute. Then their and the VPN is in place.

  When I check the logs, I can't see him connect LDAP ranging down to connect to to the top.

  My question is if there is a way to make the LDAP connection, stand or accelerate this process.

  Thoughts?

  Jason,

  I had a long discussion with BU some time previously, if the LDAP protocol is in fact a taken AAA mechanism supported with ezvpn.

  To which (at the time) they said 'no '.

  We have therefore tabled a documentation bug:

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId= CSCud35798

  (which has not yet been resolved).

  If it is in fact always a limiting factor, I suggest contacting your system engineer or open evidence of the TAC, so we can check with BU.

  M.

• Custom LDAP integration

  We create a custom LDAP integration to replace the obsolete in the application. We have all our services to remote containers on a server separate from the slave servers. Must install the custom assemblies on the remote server that contains and if yes which directories? The documentation in the EP said to install only in the directories bin, web applications. Thank you.

  Yes, put it in the same directory as the RemotingContainer.exe file.

• OMSS and OID LDAP integration

  I am to evaluate the integration of the OMSS for my business.

  In our scenario, the LDAP protocol is OID: according to the installation guide OMSS can be integrated with databases, Microsoft AD, OUD or OAM. What the OID?

  Thank you

  Luca

  Yes - OID is supported Oracle Mobile Security suite which Frédéric Desbiens-Oracle is different from OAMMS!

  See - http://www.oracle.com/technetwork/middleware/id-mgmt/omss-technical-wp-2104766.pdf?ssSourceSiteId=ocomen (check text above Figure 5)

  Oracle Directory Services for direct access to mobile applications for users based on LDAP directories

  for example, Oracle Internet Directory (OID) or unified Oracle Directory (OUD)

  Nassima

  Sudipto Desmukh blog: Oracle Mobile Security Suite (OMSS)

• WLC 5508 Active Directory / LDAP integration to authenticate

  Hello

  I am redundant deployment WLC 5508 with 4 VLANS and 4 SSID matches it, everything works fine, now I have to do the below, then please put your valuable comments and advice.

  1. I need all users authenticated with existing Active Directory/LDAP wireless

  2. I create accounts invited in my ad and go to the guests, so comments should only Internet access except the company's resources

  2. How can I get my VoIP VLAN for wireless phones. I want to only wireless phones to connect to VLANS voice. No internet access on VLan VoIP

  Concerning

  Dinesh

  Hello

  1. I need all users authenticated with existing Active Directory/LDAP wireless

  2. I create accounts invited in my ad and go to the guests, so comments should only Internet access except the company's resources

  YEARS 1 & 2 - the link below provides the example config and also the memorandum of understanding on the conditions depth, please go through the link atleast once...

  http://www.Cisco.com/en/us/products/ps6366/products_configuration_example09186a0080a03e09.shtml

  2. How can I get my VoIP VLAN for wireless phones. I want to only wireless phones to connect to VLANS voice. No internet access on VLan VoIP

  YEARS - you can configure the auth required for WLAN voice and then NAT this interface VLAN so that he won't get out of the internet!

  Let me know if that answers your question and please do not forget to rate traore useful messages!

  Concerning

  Surendra

• The WLC and LDAP integration

  Hello

  I configured a WLC to integrate with LDAP, it works fine when I use only one Active Directory server, but I have other users in the other Active Directory server. When I turn on both servers and some users try to log in with the second server WLC triggered for a little while it is impossible to set up the equipment nor the telnet that during that time, and users may not be authenticated more, I have to disable the server and then activate just one of them in the order users can connect again. I also saw this behavior when more than 4 users try to connect to the same access point at a time.

  Anyone know why this is happening and how to avoid it?

  Thank you very much for your help

  Yes, it leads me to believe that your RADIUS is not configured correctly. I should make it clearer, but in order to make 802.1 x, you must have an IAS or ACS that extends from your ad (or LDAP, I suppose, but I am not sure that it is supported). You can't just point your controller to your ad, it does not work.

• Cisco ASA with Microsoft LDAP integration

  Hello

  I need to integrate a Cisco ASA 5510 version 8.3 with Microsoft LDAP to authenticate IPSEC VPN.

  Following the procedures described in the documents below:

  http://www.Cisco.com/en/us/customer/docs/security/ASA/asa83/configuration/guide/access_aaa.html

  http://www.Cisco.com/en/us/customer/docs/security/ASA/asa83/asdm63/configuration_guide/access_aaa.html

  Does not. Turn on debugging ldap 255.

  The result was that debugging is attached.

  Try to connect using the softerra ldap browser and see if it works or not.

  Kind regards

  ~ JG

• The Lab Manager Ldap integration

  I, ve configured a vSphere/ESX environment of OTA in a subnet of 172.10.1.0/24.

  Open ports on our firewall to manage OTA from our direct environment. Online subnet: 10.128.0.0/16

  Installed Labmanager 4.0 and add it to the field in the environment of the OTA.

  Everything works fine. After you open the port 389, I want to synchronize LDAP.

  When I do "Test LDAP settings" I get the following error:

  

  I read that it is not best practice to place a LM server in a domain.

  http://blog.aarondelp.com/2010/03/VMware-Lab-Manager-install-notes-and.html

  I tried the Ldap synchronization with the server of LM in a working group, but also, it does not work.

  Tried with the domain admin user, manually add the ldap port, it was left empty, different DN, nothing worked.

  Read also in the article is not to name the server labmanager LM, and that's exactly what I did...

  Also the lab Manager folder described in the article was not created in vCenter.

  I think uninstall LM, rename the virtual computer and reinstall LM. I don't know if it will solve this problem.

  I hope someone has a solution...

  Thank you...

  the 'test' LDAP settings actually trying to find the account provided credentials.  It's like a back loop... I should be able to find me before as I find other people.

  If the test account is not in the basic DN path of research, but can locate other accounts then it should.

  Best regards

  Jon Hemming

• Integration of CUCM LDAP

  We are currently running CUCM 10.5.1 and using all users the.  We want to Setup LDAP integration, and I try to understand what services will be performed.

  Can someone inform me what services use the database of the CUCM end-user for authentication?  I guess it's only administrators who log on to the Web site and the Jabber clients.  Is there any other use of these credentials?

  Are there any other warnings should I be concerned?  A thought is that I do not want to import a bunch of accounts of service or distribution groups, so I need to put some LDAP filters.  Are there other traps that I should know about?

  If you enable access for end users ccmadmin, they would use their LDAP credentials for this, if you set UCMuser, for this as well. If you use Jabber, too.

  There is a filter by default for what to import, documentation of CUCM to LDAP synchronization is, what source directory you use, only users will be imported, you can change it if necessary.

• CC & B integration with LDAP

  Hi friends
  How can we integrate CC & B with any LDAP server. Pls know me steps.
  
  
  Thanks and greetings
  Jean Jacques

  LDAP integration white paper should provide a good starting point.

  You can download My Oracle Support. Look for the doc Id 774783.1

• LDAP authentication integrated and now BAM start page is very slow to load

  Hi, all ~
  
  I have a new installation of BAM with the 10.1.3.4 10.1.3.3 applied patch.
  
  I went through the installation of BAM and the note of LDAP integration technique guide and have been able to successfully integrate BAM with our LDAP, where "successful" means that I am able to provide my own LDAP credentials and connect to BAM.
  
  However, BAM splash screen now always somewhere takes on the order of 1-2 minutes to load... so I guess I am wondering if there is a common cause for this kind of mistake?
  
  Suggestions for things to check would be appreciated.
  
  Thank you
  
  -Nathan

  For what it's worth, the solution in our case was to separate the BAM (10g) of LDAP.

  User administration becomes a little more manual process in this case, but BAM pages to load almost instantly to users now, while prior to some users, should be as much as 10 minutes for a page to load as a result of their record in.

  Another advantage of the decoupling of LDAP is that IIS is able to make the connection integrated Windows for users, which means that users must provide a login and a password longer.

  The "witch hunt" that was encountered had to do with IIS kingdoms and create connections to the BAM server after the decoupling in JDeveloper. In our tests, under IIS-> Web Sites-> default Web Site-> properties-> Directory Security (tab)-> "authentication and access control" Edit button, the following must be specified:
  Check only "Login Windows integrated" and "Basic authentication".
  Specify a field 'default' by pressing the selection button and choosing an appropriate area
  From there, your JDeveloper BAM connection, be sure to include the domain selected in the properties of your connection.

  -Nathan

• Default password for LDAP sync accounts that do not use LDAP authentication

  We use CUCM 10.5.1.  We have enabled LDAP and installation directories.  I can see the previous local users and new users sync ldap.  I know that if there was a previous local user with the same user as the new ldap user ID, this account is converted into an ldap account and I guess the password stay the same before ldap integration.   But what of the new ldap sync protocol accounts?  I see that there is a field of password for them, but what is the default password for these newly created accounts and where I can edit this default password?

  I do not have a 10.x here, but on previous versions, "credentials political default" sets the default password.

  It was under the management/diploma default user policy. Choose the 'end user' political 'password' and put the default value you want here. It may be in a slightly different place from 10.x

  Aaron

• Never work AD/LDAP Group queries

  Try to get LDAP / integration with Active Directory, so we can use different strategies for different AD users and groups.  Lets say for example Active Directory I have the following structure:

  OU = employees of the company

  OU = accounting

  User = John Doe

  User = Johhny Appleseed

  Group = accounting (two above members belong to the Group)

  UO = IT

  User = administrator

  User = Admin Joe

  Group = Information technology (the two above members belong to the Group).

  In the scenereo above if I do a group test [email protected] / * / and the accounting group, he always comes back that they are not a member of the group.  In ADUC in this group to the title of the email field as spelled on [email protected] / * /.  So I tried this syntax in the test group, but I still get that they are not a member of the group.

  Failure: Action: negative match.
  Reason: unknown error (not assumed a member of the Group).

  How can you sucessfully query for groups in this case?

  You must use the DN of the group...

  CN = accounting, OU = accounting, ou = CompanyEmployees, dc is company, dc = local

  Its a LDAP query, then think of LDAP...

  Ken

• CUCM 10.5.1 LDAP Sync not show a single user

  Hello

  I use cucm worm 10.5.1.X and it is fully synchronized with LDAP.

  like today, I saw a user is not displayed in the user section final cucm.

  I Resync and restart the Cisco directory service, but still not able to see this user in the end-user CUCM section.

  Anyone know what is the problem and how to fix it?

  !

  !

  the last time I used a single document of cisco and with drive erased cucm section the user's search history and showed users.

  but now I am unable to find this document and implement measures on cucm as well as find the user in the user section final cucm.

  Is this user in a container that is covered by your research base of the LDAP integration, or was perhaps inappropriate user different worms?

  The user has may be disabled in LDAP?

  You have a filter on your LDAP integration, if yes what is the filter?