Never work AD/LDAP Group queries

Similar Questions

• LDAP group does not map synchronization

  I have problems of LDAP group synchronization maps for UCS central to allow access for UCS - M connection. They are not properly synchronized.

  Hi Mark,

  Hope your week is going well. If you could answer the following questions that would help me greatly.

  We have other issues with UCSM communication plant or just this LDAP configuration?
  Do you have any configuration of pre-existing LDAP who works, or is the first implementation of LDAP?
  You apply the LDAP configuration in the root with the central organizing?

  If you can go ahead and go to the operations management-->--> security--> local make operational policies you there organizations affected, if it does not it will not work.

  So if this is the case, go to--> user Administration and authentication--> local--> properties--> Assign/Unassign organization--> make sure that the Organization and the root are there. If only the ROOT is there it will not work and vice versa if just the organization is there, it won't work.

  Once you do that try to re - connect to central and refresh and check that the operations management tab shows in your organization.

  I hope this helps.

  Qiese Sa'di

• vR6 LDAP Group import

  Hello

  I have configured an import ldap to use my groups active directory for the assignment of roles and rights.

  I'm able to import an ldap group, but it only shows me that the band without members.

  So the members of the group are not able to connect.

  Any ideas?

  Frank

  I know why, but after having changed the import for mode easy Don t and get the root domain information, it works.

  ;-)

• Toshiba WT310-105 - touchscreen never worked

  Hello!
  I bought a Tablet WT310-105 , and since I turned it on the first time, touch screen never worked, is of no use in tablet form!

  What I read in control panel / system is:

  ... Type of system = 8 64-bit Windows
  Pen and Touch only = no net or get in touch for this device ...

  Then I tried to disable the video card - on device Panel and touch screen worked fine, but still I read:

  Pen and touch = limited to 5 points

  .. .for my tablet should be Multitouch 10 points ; and then, of course, in this way, I can not use the video card driver, I can't even control the brightness of the screen, which is always up!

  Could someone help me with this please?

  Thank you.

  I've already updated with Windows Update and Toshiba Service Station...

  Reboot, then go into the BIOS (F2 keep during power on), check if touch works in the BIOS.

  If you have Windows 8 installed you may need to hold SHIFT for the stop, so he won't hybrid suspend (hibernation).
  You can't get into the BIOS if Windows goes into hibernation mode.

  If the touchscreen does not work in the BIOS, you will need to send the tablet in to get it repaired at an authorized Service Centre.
  If the touchscreen does not work, there is a driver/registry problem. Run recovery or do a reset to Windows / discount or a system restore.

• Apple ID never works after doing so.

  Whenever I make a new ID and check the ID after the Apple ID the ID works and will check but then never work again and I talked on the phone about Apple and made a new IP address with the Apple Rep of Suport and still the new Apple ID just that they never, works but only once and that no job ID was made by Apple , not me and still the same problem.

  New ID and password has been filed at least 20 times.

  Not sure whether you have a question to your fellow users. That means never 'work again'? Are you able to log into the account on your iOS device and/or computer? If you are, then, what happens when you try to use the account to download something? You get an error message?

• Satellite A100-998: brightness & DVD Hotkeys never worked again

  Brightness of the screen for my Satellite 2 years could easily be adjusted by the Fn + F6/F7 keys, but not this new. In addition, the keyboard Play/FF/Rewind for the DVD Player do not work.

  Toshiba Hotkey Utility shows a file 1.37 MB on my Add/Remove Programs list. A solution might be to delete and reinstall this program? If so, my recovery disks, such as provided by Toshiba, would allow me to re - install the Hotkey utility?

  Thank you very much for all your comments.

  Hello

  Sorry, but I can't believe that the brightness Hotkeys & DVD never worked again. With the settings everything should work well.

  Before starting any discussion can you please check your laptop model? A100 is fairly new and may not be 2 years old.

• Satellite A205 Vista - FN + F9 never worked to disable the touchpad

  I have a Satellite A205 running Vista. FN + F9 key never worked to disable the touchpad.

  I read that there is an option to disable the touchpad when a mouse is connected to a USB port. I don't seem to have that option.
  I have to go in Control Panel to turn entirely which is kind of a pain.

  I use a mouse Laser Bluetooth MS so there is no mouse plugged into a USB port, only the Bluetooth dongle.

  Does anyone know of an easier way to do this?

  Maybe you should check the page of the Toshiba driver we and must download and install the utility of Toshiba touchpad on / off.

• Tactile B320 has never worked

  Just realized that my girls that B320 was supposed to with touch screen. It has never been there since day 1, but we assumed, that he was not part of the particular model, we bought. I reinstalled the drivers, nothing works.

  Any other person with this problem never managed to get their work and how?

  Hi Nedmundo,

  I checked the information that you send via PM and you have the following LCD module:

  LCD - AUO M215HW03 V1

  This does not indicate that it has a function touch that's why the touch screen has never worked. If you specifically ordered a model of touchscreen for your daughter, I recommend that you see the front desk to see if you have the correct unit (it should be here if your device is touch capable or not).

  Hope this helps

• Webcam never worked on Pavilion DV7-6052ea

  Hi, I've had a Pavilion dv7-6052ea for a few months now and the built in 'Truevision HD' webcam never worked so I thought I should do something!  OS is Windows 7 64 bit.

  When I open Youcam3, I get the warning message, next.  Warning - no webcam detected, try to connect a webcam to your computer now.  If you use a built-in camera, make sure it's on. »

  The checking Device Manager there is no entry 'device of image.  The 'virtual Webcam Cyberlink pilot' appears under sound, video and game controllers.

  Would be grateful for any help - especially since my wife was not treated well by HP customer care a few days back...

  Thank you

  Gavin

  Ok.. This issue, never been resolved, you can speak to your dealer for replacement or refund.

• System Restore never works

  Original title: Sys restore never works. Tried Safe Mode. Disabled Norton. One screen shows completed. Later, another said "' why?

  Op of Vista running on Dell since 2007. System Restore never worked. Tried to follow the advice on this forum, but it does not work. Last trial returned a screen saying that the system has been restored. After starting on another 4-5 minutes later and a window appears informing me that the system has not been restored for some unspecified reason. If anyone has an answer, please list each step carefully in order to follow and do what to do.  Thank you to each and every one.

  Hello

  • Have you received an error message?

  You can use the following methods that can help you solve your problem:

  Method 1: Look for errors in the event viewer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Method 2: check if you are able to perform the clean boot the system restore .

  Note: make sure that the computer is configured to start as usual by following step 7 of article.

  Method 3: run the System File Checker tool: http://support.microsoft.com/kb/929833

• Computer laptop HP G72-130ED - the screen brightness control never worked again

  Hi people,

  I've had this laptop again (in 2010) and control screen brightness function keys never worked.

  All other functions working keys, it's just the f2 and f3 (light downwards and upwards) are not.

  All updates (from the site of HP Netherlands) support have been installed.

  In addition there is no brightness control of in control panel windows or which would allow control over the brightness using the mouse.

  It would be great to have control of the brightness of the screen because the screen is really bright and it is unpleasant to use in any other circumstance during the day!

  Grateful for your help, Zion.

  Hi people,

  Just found the solution myself:

  http://superuser.com/questions/400417/brightness-settings-gone-how-do-i-bring-it-back

  Cheers, Zion.

• How it works for objectChoice group "FOCUS_CHANGED".

  Hi all

  can someone tell me how FOCUS_CHANGED works for the group object of choice when we change our focus in the drop-down window?

  actully I use:

  {public focusChanged Sub (field field, int eventType)

  If (eventType == FOCUS_CHANGED) {}
  System.out.println ("FOCUS_CHANGED");
  } else if(eventType == FOCUS_GAINED) {}
  System.out.println ("FOCUS_GAINED");
  } else if(eventType == FOCUS_LOST) {}
  System.out.println ("FOCUS_LOST");
  }

  }

  It nevers print "FOCUS_CHANGED", but it works for the FOCUS_GAINED and the FOCUS_LOST.

  Please help me.

  Its urgency.

  Thank you

  Ashutosh

  Well you're right, it doesn't have the fire for me either. You can use "FieldChangeListener" it will be server your purpose.

• ASA VPN - allow user based on LDAP Group

  Hello friends

  I have create a configuration to allow connection based on LDAP Group.

  I m not specialize in the firewall and I tried to follow the links above, but both seem old, commanded several is not available.

  http://www.tunnelsup.com/Cisco-ASA-VPN-authorize-user-based-on-LDAP-group

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  Anyone know how I can do?

  Thank you

  Marcio

  I like to use the Protocol DAP (dynamic access policies) to control this.  Follow this guide:

  https://supportforums.Cisco.com/document/7691/ASA-8X-dynamic-access-policies-DAP-deployment-guide

• YouTube never works on my Windows 7.

  Original title: a lot of questions.
  My utube never works over https,
  Buy https for my own pc and no wifi?
  on many sites, I see https and no green lock, instead, the https protocol is present with a warning sign that my data may be compromised, what can I do?
  What is google packs? It is by default active?

  many sites Web only offers support in the forum and not through personal e-mail communication, if I have a question for which I need to share my personal data, in this case, how can I contact the service provider?

  To avoid confusion and duplication of effort, please post a follow-up later all replies to your thread of origin in the German forum-online http://answers.microsoft.com/de-de/protect/forum/protect_other-protect_scanning/many-issues/7ef0728c-7be3-4071-a4ff-16646b8903ed

• WebVPN mapping of group policy-based user name not LDAP Group?

  Hi guys,.

  As the title says I'm looking for a way to map users who authenticate via LDAP to the webvpn to a particular group policy.

  The reason why I want to do, is to assign particular cifs on a per user basis. I know that you can map a LDAP group to group policy, but all users are in the same group. (I can't change that fact).

  So I was wondering if there is a way to map a "username", which authenticates via LDAP on group policy?

  Cheers.

  That's maybe what you are looking for:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a008089149d.shtml

  It is similar to the use of RADIUS 25 attribute, but for LDAP.  Read it carefully and you should find the solution.

  Please evaluate the useful messages.