VRealize Operations Manager appliance, 6.0.1 to 6.2 upgrade.

Similar Questions

• HOL-SDC-1610 Incorrect Credentials for vRealize Operations Manager

  In the laboratory HOL-SDC-1610, during step 55 module, when you are prompted to enter the user credentials in the web client for vRealize Operations Manager, credentials given instructions not to allow access:

  Authentication source: local users

  User name: admin

  Password VMware1

  

  The credentials must be admin / VMware1!

  Please give that a try. Was he in the lab manual or the README.txt file where you found the password for this?

• vRealize operations Management Packs for IBM DB2 and PostgreSQL

  vROps in the community:

  Blue Medora is currently developing a vRealize of two VMware new and distinct from Management Packs in operations to IBM DB2 and PostgreSQL databases.  Our goal is to free the two vROps MPs in September calendar.  Both members will support vROps v6 +.

  
  If the integration of the vROps with IBM DB2 and PostgreSQL databases is something that relates to you, our product management team is very interested to talk to you about what aspects of the Lenovo-computing and network infrastructure want to see versions of IBM DB2 and PostgreSQL your organization databases planed in vROps, most commonly leverage , as well as some specific troubleshooting / diagnostic use cases that you have around DB2 and PostgreSQL.

  Please write to us at [email protected] If you want to participate in a program of pre-release of IBM DB2 and PostgreSQL.

  
  

  
  

  
  

  
  

  vROps in the community:

  Medora - V blueMware vRealize Operations Management Pack for PostgreSQL is out yesterday.  You can find more details on the MP for PostgreSQL here.

  Thanks to all members of the community who responded to our request, here, for our pre-release program participants.

  Your participation and feedback in the pre-reissue/beta program has been essential in helping us design and develop the vROps MP for the IBM PostgreSQL databases.

  

  

  

• Can it differentiate please vmware Sphere operation management and VMware vRealize Operations Manager 6.0?

  Hello

  We have a license for VMware vSphere 6 with operations management Enterprise Plus for 1 processor

  Can explain everything about the use of these products and differentiate? Also, do I need to buy VMware vRealize Operations Manager 6.0 license to use this VSOM?

  vSphere with operations management Enterprise Plus 1 processor 6 includes 1 processor for vSphere Enterprise 6, Plus and one license for vRealize Operations Manager Standard.  You don't need to purchase vRealize Operations Manager 6.0 to use vSOM, as it is included.

• Failed to create dashboard customized by vRealize Operation manager

  Hi all

  I just deployed a cluster of vRealize (v.6.0.2) Operations Manager and I am able to deploy solutions/manage roles inside. However, when I want to create the custom dashboard, I found that there is no such option for me.

  

  I connect the administrator account created during the installation, which is supposed to have every permission.

  

  No suspicion on which permission/configuration I may have missed to create dashboard?

  Thank you

  Silvester

  Looks like you are using a key of vSOM.  I see it's enterprise edition, which entitles you to vSphere Enterprise, but all versions of vSOM give access to only the Operations Manager Standard edition features vRealize.

  The link below mentions "capabilities are equivalent to the vRealize Operations Manager Standard edition"

  VMware vSphere with features of operations management | United States

• vRealize Operations Manager vSphere Client Web plugin does not work!

  Hi guys, I'm updating my environment Operations Manager vRealize and after that, I do not see the Web Client vSphere health status information. I followed the Migration to vRealize Operations Manager 6.0 Tutorial available in VMware Youtube channel and after change my TIME on the new server vRealize Operations Manager 6.0 Operations Manager 5.8 vCenter vCenter Operations Manager always direct plugin to my old Operations Manager vCenter VAPP environment.

  Error message:

  Unable to connect to the server vCenter operations. Check your network connection and the execution state of the virtual machines in the vCenter Operations Manager VAPP.

  Anyone know how to change the vCenter Operations Manager plugin to my new environment?

  Look at the screenshots to understand my problem.

  Thank you buddy. In fact, I had to do to solve the problem, but I removed the previous configuration before. I had to open https:///mob, locate the old configuration of Operations Manager 5.8 vCenter in content, ExtensionManager and UnregisterExtesion "com.vmware.vcops". After that, I did the same way as you have said and done! Thanks for your help.

• vRealize Operations Manager 6 - trial and question

  Hello-

  Recently, I have deployed the trial for vRealize Operations Manager 6. I have 2 Server vCenter added, seems to work very well, but the other shows the joint as crucial. I did a little research but didn't find anything clear about the cause or the resolution of these messages. I hope someone can help point me in the right direction.

  Thank you!

  There may be services on your vCenter which are not running, or inaccessible.

• Connect Vrealize Operations manager at VRA 7 error

  Hello

  I would like to connect external refreshing Veralize Operations manager again 7 VRA, and we got an error:

  
  

  : handshake alert: unrecognized_name

  
  

  Is that someone can help me?

  
  

  
  

  Max

  
  

  That deducted an incompatibility between your SSL certificate and the vROps host name.

  Grant

• [VOA] vRealize Operations Manager > VOA reports display the values, I can't choose for myself

  Dear people,

  I was wondering if you can help me with a question about the visibility of the data in combination with the beam of VOA and values.

  As you know, the VOA bundle comes with a bunch of reports which consists of different points of view.

  These views are used to extract information from the distribution of the VMware Tools vSphere environment, showing the slow down VMs and many other things.

  But here's the problem: no matter what I try, I can't reproduce these included several views.

  For example:

  I select the view predefined "Machines Virtual Guest OS Distribution" as included in the package of VOA.

  Topic , this is related to VCenter-adapter → Virtual Machine.

  Data , this is related to summary | Guest operating system. Full name of the OS comments.

  I have provided a Gifcam-record showing what is the problem:

  

  The built-in view contains this information of guest operating system , I can't check myself, no matter what I try. This selection of data simply does not exist, yet, it is mentioned in the report.

  What kind of constraint is it? Why the report does not show properly I still do not see the values?

  Anyone else had this problem and knows how to handle this problem?

  Any help is very appreciated!

  Kind regards

  EDIT: I forgot to mention that I am logged in as admin.

  After re-reading your application, I think that my last post has not answered your question.  However, it should...

  You don't see the full name of the Guest OS tab data, is because you're metric research, not properties.  Click on the small icon in the upper left corner nest to the filter field, and it will change to the properties.  Now, you will see Guest OS full name under summary as a data option.

  

• vRealize Operation Manager 6.0 - Snooze alert for host in maintenance

  Hello

  I was wondering if somebody encounter this situation or have a solution for this. In the previous version of vCOPS by default when a host was in interview he disappeared from vCops and does not generate any alerts. With the new version, this behavior is no longer present. Since we are currently plug our hosts, we get a bunch of alerts for guests who do not have loads of work on them.

  If anyone has a way for us to get this functionality, let me know! Looking into this at the same time.

  Thank you!

  Finally I ended up adding a definition of the symptom in the alert

  Where this can be useful for someone else

  Alert definition: host has lost the connection to vCenter Server

  Creates a new definition of the symptom

  Type = property

  Name = host State not in maintenance

  Length of ownership. State of maintenance. = inMaintenance

  The alert now as two conditions and for the moment, in my test environment, that it does not work as expected.

• vRealiza unable to upgrade Operations Manager

  Hello
  

  I have vRealize Operation Manager 6.0. I'm moving from 6.0 to 6.1.
  While installation time it shows since long time "5 of the 9 pre script preparation.
  
  As of now I don't get existing URL also, please give me the suggestion to solve this problem.
  
  Kind regards
  GV Ganesh

  Hello

  Finally I got the solution for this questions, "log/Storage/Log" partition used 100% vROPS because of who unable to continue improving.

  After clearing old newspaper on this partition, it will be upgraded successfully.

  Kind regards

  GV Ganesh

• Help to configure content vRealize Pack of Operations Manager for paper Insight

  I am running the following:

  vrops Version 6.0.1.2523163

  Log insight Version 2.5.0 - 2629935

  I installed the v1.0 vROps 6.x content pack in Insight Journal and used this article very useful when configuring the liagent.ini file

  vRealize content Operations Manager Pack for newspaper Insight - VMware Blogs

  Everything seemed to go well, but the end result is no data of vrops Li and connection errors in the newspapers of the agent without clear indication of why it is not agent connection.

  Viewing the log file, I see a lot of counters indicating the date, the agent of time shows that he has worked for a few days now with more 8 million observed events.

  However, interrupted events number matches the 8 million observed number of events which means that everything has been ignored "due to the overflow of local storage or rejected by the server" as stated in the article.

  2015-08-23 17:07:16.704273 0x00007f770ffff700 < path > CFApiTransport:348 | Re-login to the server vrops.domain.local:9000

  2015-08-23 17:07:16.762633 0x00007f770ffff700 < error > CurlConnection:482 | Transport CurlConnection::Config error: could not connect to the server

  2015-08-23 17:07:16.762664 0x00007f770ffff700 < path > CFApiTransport:328 | DoConnectJob [deferred by 167 dry connection]

  Agent of the time 134:15:34.106000

  Events observed: 8 176 438 (total number of events saw the newspaper sources since the Agent started or changed server)

  The events collected: 0 (= fall the observed)

  Events sent: 0 (delivered to the destination server)

  Events ignored: 8 176 438 (abandoned due to overflow of local storage or rejected by the server)

  Mailing frequency: 0.00 EPS (average of the last minute)

  DB file size: 143,576,064 bytes

  CPU usage: 0% (in the last 900 seconds average)

  Link: cfapi://vrops.domain.local:9000

  Host name (FQDN full): vrops.domain.local

  Opportunity of free space: 191,429,376 bytes

  Two things, I thought maybe to blame that I don't know how to fix:

  1. vmw_vr_ops_hostname = IP address? same as address of node? My cluster shows the node address as the IP address rather than a FULL domain name. I tried to provide as well in the ini file, but doesn't seem to help, but I find it weird that I don't see the name domain FULL configuration section that I linked to suggested that I should. And what is listed here would be that I filled in the ini file to vmw_vr_ops_hostname file?
  2. In vrops, under Administration > Support > newspapers > change the Logger Configuration > export to Syslog, no matter how many times I uncheck the box 'exit of syslog server logs' external and click ok the box remains checked off the coast. I'm sure that this must be unchecked, but even if it were problems, as I understand it, it would be especially causing duplicate rather logs that prevent all newspapers to appear as is my case.

  According to this article it is said: "If export syslog is configured then the required configuration of the specific agent is not set and the syslog Protocol is used instead of the cfapi." It is also very important to note that configurations can and will be replaced! By example, if you configure the agent works with the content pack (for example. liagent.ini) client-side and later someone configure syslog export from the user interface, the configuration of the client-side agent are crushed with the parameters of the interface user break the integration of content package. »

  vRealize content Operations Manager Pack for newspaper Insight - SFlanders.net

  Given that syslog export was apparently when I first tried to set this up, it would make sense that this is what causes problems, but how could I then set? Especially when the user interface won't let not disable me export syslog on vrops?

  Any help is appreciated. Thank you

  Very useful - I think that the problem is with the [server] section if your configuration. What is the host name = value? It can be solved? The reconnecting log messages are expected that the delayed connection makes it sound like the configuration of the host name does not.

• How to remove vCenter Operations Manager to the extent of consumption?

  Hello

  I imported data from metering 3.3.2 to 3.4. Collection fails:

  'No info extension Operations Manager for xxx.xxx.xxx.xxx vCenter we didn't took a vCenter Server.

  There was a vCops a long time ago, but it has been uninstalled for a long time according to the removal instructions (VMware KB2036389) including the defection of the extension.

  Manage / products a buttons only rebuild and change to vCops, but how can I remove vCops to operate the data collection?

  Note: You mentioned that you had already registered vCOPs/vROPs with vCenter. If this is the case, then you can skip step 1.

  Here are the steps that I followed which allowed me to delete a previously docommissioned vCOPs/vROPs vCLUM server.

  1. make sure that the server vCOPs/vROPs is more entered with vCenter

  • You can check it out and remove manually by following the instructions in this KB article - VMware KB: remove or disable the plug-ins from vCenter Server and vCenter Server Appliance
  • The plugin you are looking for is: com.vmware.vcops

  2. in the portal web vCLUM, click Manage in the top right

  3. make sure that the products tab is selected

  4. click on the checkbox Show inactive

  5. click on the button delete next to the vCenter your old server vCOPs/vROPs was previously attached (you will get a prompt saying that it will not remove the vCenter if he he already asked for data)

  6. Finally, click Activate next to the vCenter.

  I hope this helps!

• vRealize operation not displaying VOA does not after importation

  Anyone had problems installing the vRealize reports PAK VOA? I installed successfully in the hands on Labs and it works fine, when I try and import in my environment vRealize running VMware vSphere with operations management Enterprise Plus for vRealize operations, it is important and will post fine without error but none of the VOA reports are listed. I followed the update instructions and full as well as the VOA_Reports-FINAL - v3.pak, but few last important what I have try it just does not appear? I also tried earlier versions of PAK but they do not always appear. I am running Version 6.0.1.2523163 Build 2523163 vRealize

  While look us into this, I have attached the xml files that you can import into the 6.0.1/2, environment directly in the reports tab (not in the Solutions section). Be sure to select the options to replace all the existing views.

  To do this on your own: If you have another environment (lab, etc.) which is located on 6.x, you can import the. PAK file and then export each report as .xml. Just make sure you have 1 .xml for each report (4 total).

  Thank you

  Bill

• Installation vCenter Operations Manager for Horizon view adapter

  Hello

  If I want to install the Operations Manager vCenter for Horizon view adapter, I get a Message "confirm the update - vcenter operations manager can not go back to the previous installation state.»

  Backup appliance virtual vCenter OM before applying the update... »

  Is that normal and I can say 'OK' or made, I made a mistake in the Installation with the EGGS?

  Thank you!

  

  
  

  Hello

  I solved it... I was scared, but ok and next... it works great!

  Novell1