Vs ATI HD 4650 DVI VGA - monitor attached to VGA not clear - what to do

Similar Questions

• Elite HPE-180 t & ATI HD 4650 - Best Way to 3 monitors?

  I have 3 monitors:

  1 asus 23.6 in. [DVI, HDMI, VGA]

  2 asus 23.6 in. [DVI, HDMI, VGA]

  3 LG 22 in. [HDMI, VGA]

  What I read here and since I have not been able to get 3 monitors running off my ATI HD 4650, I'll try to find the cheapest, best that my system can handle and better long term to use.

  So, here are my choices:

  1. install another PCI card?

  A. suggestions?  Low cost...

  2 USB 2.0 VGA/DVI/HDMI graphics card

  A. suggestions?

  Thank you

  Glee

  Here's my setup.

  PC HP Pavilion Elite HPE-180 t

  AZ222AV #ABA

  • Genuine Windows 7 Professional 64-bit
  • Intel Core i7 - 920 quad-core processor [2.66 GHz, 1 MB L2 + 8 MB of cache N3 shared]
  • 16 GB 1066 MHz DDR3 SDRAM [4 DIMMS]
  • 1 Terbite SATA 3 Gb/s 7200 RPM hard drive
  • 1 GB ATI Radeon HD 4650 [DVI, HDMI, VGA]
  • Tuner TV, ATSC-NTSC with PVR, remote

  I think that the USB adapter is your best choice. Just pay attention to the resolutions available for whichever you choose.

  See you soon,.

• Two monitor attached by DVI, only working

  Hi, I recently installed a NVIDIA 8400 GS video card and attached a second monitor that I use the card DVI port. I am running Win 7. Now the monitor which was attached to the motherboard DVI port does not work. I suspect that the disabled card video motherboard drivers? I tried to use Windows Control Panel and NVIDIA Control Panel, but no other monitor is detected. Does anyone know how to get two monitors work? Thank you!!

  Even more important is it that a single graphics card, if Windows does not detect the graphics card on the motherboard, it does not detect a monitor attached to it.

  Check that your motherboard has the latest version of the BIOS and that you have the latest chipset drivers, although I would not hold much hope.

  Your only other option will be a card with Dual DVI or HDMI and DVI output.

• Question of DVI/VGA

  We just bought a HP 700 emissary - 056 desktop computer to use with the projection of our church system. With our current system, we have a second video card that manages our projectors and the integrated video card works our desktop monitor.

  The Envoy has a Dual DVI/VGA video output. My question is... rather than install a second video card in the new computer, can I get a DVI to VGA and run the spotlight OFF... Let's say, exit DVI and the office off the coast of the VGA output? The system will recognize one or the other as a "second monitor? If I can use the two DVI and VGA outputs at the same time? Or, is it (as I suspect it will be) disable DVI when I plug it into the VGA?

  Thank you!!!

  Here are the specifications for the HP ENVY 700-056 desktop computer to. This model supports the simultaneous use of both outputs video. This model has a DVI - D output (digital only) and a VGA (analog only) output as shown below.

  

  (3) - VGA                            (4) - DVI-D

• Vs vs DVI VGA HDMI

  I have a new computer and monitor and eventually hopes to use the monitor for television, but not now.

  Currently, the computer is used for editing photography mainly.  Is it better Setup for the vs of monitor VGA vs DVI HDMI for image quality?

  Thank you very much, Paul Herd

  Hi paulherd,

  The answer is simple: it depends

  DVI and HDMI are similar image wise, but HDMI carries audio also with her and DVI is not working. VGA is generally lower image quality than DVI and HDMI, but it can still be pretty good according to the graphics card to your PC. If your graphics card is capable of serving high-definition resolution, then VGA is superb. All really, it depends on what you want to do with it and what your PC can do.

  Here is an interesting article that talk about some of the differences that can be useful too, I found:

  http://Forum.eCoustics.com/BBS/messages/34579/122868.html

  I hope this helps. Let us know how it goes.

• HP Pavilion dv4: can I factory reset with an external monitor attached to my laptop?

  I got a laptop HP Pavilion dv4 entertainment PC. It has a cracked screen and I use an external monitor attached. Can I do a factory reset with the attached external monitor? The monitor is an HP w1815 LCD, case ini that matters.

  Thanks for any help on this.

  I would like to add that I can see on both screens only on screen cracked that I can't see the bottom of it due to cracking. As recovery options are visible on the external display, it would be prudent to start the recovery process? I made a few choice, but I am now at the point choose to 'pull the trigger' and click next to start it or hit Cancel.

  Thank you.

  Hi @Auntboris,

  Welcome to the HP Forums!

  It's a great place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the HP Guide's Forums:

  Learn how to post and much more.

  I take that you acquired an HP Pavilion DV4 laptop and want to know if you can do a factory reset with an external monitor because of the cracked screen.

  Yes, you can always make a recovery.  Here is a link to HP Notebook PC - perform a recovery of the system (Windows Vista) HP

  Here is a link to HP laptops - how to restore backup files created during the backup procedure F11 to help restore your files if you selected this option.

  Please keep me updated.

  Good luck!

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as yourself. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts, please click on the ""Thumbs Up Icon " below."

• Dual monitor - all HP - do not find the second monitor.

  I have a hp computer with integrated graphics - intel G45/G43 Express Chipset - output vga and dvi - latest drivers.

  I have two monitors - hp le2201w and hp vs17e. Both monitors have the latest driver updates. The two monitors are have only a vga input.

  I bought a DVI converter to avg and have hung up two monitors to the computer. If AVG from computer to a monitor AVG in. Then DVI converter AVG computer to another monitor. (I tried to change the monitors).

  No matter what I do, the dvi out is not found. I even tried DVI only to a monitor and it does not work.

  Any suggestions?

  What PC do you have?

  Sometimes, when there is sometimes integrated VGA and DVI on the motherboard, the DVI is DVI - D, which would mean that you can not use an adapter as there is no analogue. This document gives more details, http://support.hp.com/us-en/document/c00377019

  See you soon,.

• Does the red dot in the affect of VI attached speed or not?

  My VI has a large number of controls. If a control is defined as typedel, when the typedef connects to other controls, it shows the red dot. How can I get rid of the red dot? Does the red dot in the affect of VI attached speed or not?

  Thank you

  John wrote:

  How can I get rid of the red dot?

  Make controls/indicators that you have connected it to also type FED.

  Coercion causes slight slowdowns since there is a conversion involved.  Only in the tighter curls would be you pointed out.

• Save for precedent: the "Attachment" object does not exist in the previous version

  I'm trying to save a very simple VI from LabVIEW 2013 SP1 to LabVIEW 2009 but I get this strange error.  The VI contains only basic ex that are available in all versions of LabVIEW (shift logical AND Select,<=, u8). ="" when="" i="" try="" to="" save="" it="" for="" labview="" 2009,="" it="" gives="" me="" the="" following="">

  Missing object.  The "Attachment" object does not exist in the previous version.

  I thought first of all it had to do with being possessed by a lvclass, but even after that I removed the class (and unplugged from the lvclass) it always gives me this warning.

  When I try to open it with 2009, it will fail to load the schema-block (error 6).

  The next thing I tried was to copy the block diagram for a new VI and re - create the connector pane, but that doesn't change anything.

  Any ideas?

  Maybe "attachment" made reference to an attached comment (the arrow of a free label for an object on the diagram). I don't expect the presence of attached comments to cause a SFPed VI to not open, but it's the only thing I can think of. Try to remove any comment attached to your diagram and SFPing and see if that solved the problem.

• When I open an email attachment, it does not open but opens the windows media library

  When I opened an attachment instead of display the attachment, it opens additional windows media. I've tried right-clicking on the opening of the attachment, and then by saving the attachment to the office. It works but if I go back on the attachment and try to open it I get the windows window library.  I tried Samsung, PC manufacturer and they were useless. Can anyone help please?

  • What is the attachment file extension?
  • What email program are you using?
   
  
   
   

• How transfer and send as an attachment in OWA when forward as attachment option is not available?

  fixing email in OWA

  How to transfer and send as an attachment in OWA when as attachment option is not available?

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://answers.Microsoft.com/en-us/Office/Forum/officeversion_other-Outlook/

  It will be useful.

• software Adobe reader cannot open any .exe he says this isn't a supported file or it has been damaged it is to say files sent in e-mail attachment that has not been correctly decoded

  I am trying to open my Security Center, adobe reader opens and says this isn't a supported file or it has been damaged in an e-mail attachment that has not been decoded correctly, this happens when I try to open any program

  Hello

  ·         You have made no changes to the computer until the problem occurred?

  Method 1:

  I suggest to uninstall Adobe reader software and then try to install adobe.

  You can also check: http://forums.Adobe.com/thread/392355

  To install adobe, visit the link: http://get.Adobe.com/reader/otherversions/

  Method 2:

  You can also follow the link below and check if this can help:

  http://support.Microsoft.com/kb/950505

• When a small sign of movie is available as an attachment 'he' will not show picture but sound turns on and that 'it' will not leave

  problem title: original accessory

  When a small sign of movie is available as an attachment 'he' will not show picture but sound turns on and that 'it' will not leave.  Help!

  When a small sign of movie is available as an attachment 'he' will not show picture but sound turns on and that 'it' will not leave.  Help!

  What do you say "he's not leaving"? He kept playing with his only non-stop?
  If it is 'yes' or 'no', you can always he kill 'soft' media player.

  Take a look at your video accessory. What are the last 3 numbers, such as avi, mpeg, mov etc. ?
  It is possible that your video accessory is in a format unsupported by Windows Media Player.
  Save it in a folder of your choice.
  Googe for a FREE video converter (if you do not have one) and convert the video file toWMV.
  Now you should be able to read in the drive media with images and sounds.

  t-4-2

• Email with attached video will not leave the Outbox... Cannot delete Email with the attached video.

  Email with attached video will not leave the Outbox... Cannot delete Email with the attached video.

  Check to work offline , and then it should delete.

• ATI Radeon HD 4600 Series AGP Grapics card does not work since the installation of service pack of windows 7

  ATI Radeon HD 4600 Series AGP Grapics card does not work since the installation of service windows 7 pack has worked before

  Is not fully compatible with win7, some patches are available from ATI

  http://support.AMD.com/us/KbArticles/pages/CatalystAGPHotfix.aspx