VSA: "host not valid management gateway."
I get this:
Invalid host management gateway. Should be the same as that of VC
When you try to configure our VSA. The server vCenter DO NOT HAVE ACCESS to the INTERNET and does not have a gateway on it because of that configuration. We don't want these machines to have access to the internet.
So, that being said, what is a work-around, or a way to solve this problem, without connection to the internet.
We don't use DHCP, all is static and I disabled IPv6, respecting the troubleshooting steps: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2004832
For some reason, my Google looking for this error brough to the top of this article...
If it comes to VSA 1.0, then the vCenter server and ESXi hosts who will compose the VSA cluster must be on the same subnet.
If it comes to 5.1 VSA, then the vCenter server and ESXi hosts that make up the VSA cluster may be on different subnets.
Is what version? I guess it is 1.0.
In this case, gateway to the Victoria Cross must be on the same door as your ESXi hosts, even if he is a "dummy".
Cormac
Tags: VMware
Similar Questions
-
String sequnceDocumentId = "SELECT snw_doc_type_map_id_seq. NEXTVAL INTO: 1 FROM DUAL; " ;
PreparedStatement pStmt = null;
ResultSet rs = null;
rowExists Boolean = false;
CallableStatement st1 = getDBTransaction () .createCallableStatement (sequnceDocumentId, 1);
try {}
ST1.registerOutParameter(1,types.) Integer);
ST1. ExecuteQuery();
SeqId number = new Number (st1.getInt (1));
setDocumentTypeId (seqId);
ST1. Close();
}
catch (Exception e) {}
e.printStackTrace ();
}
Get the following exception
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:91)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1035)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:191)
at oracle.jdbc.driver.T4CCallableStatement.executeForDescribe(T4CCallableStatement.java:788)
at oracle.jdbc.driver.T4CCallableStatement.executeMaybeDescribe(T4CCallableStatement.java:863)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1187)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3386)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3430)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1491)
at weblogic.jdbc.wrapper.PreparedStatement.executeQuery(PreparedStatement.java:128)
at oracle.apps.snw.schema.server.SnwDocumentTypeMappingsEOImpl.create(SnwDocumentTypeMappingsEOImpl.java:42)
Please let me know what Miss me...
Thank youJust talking about the top of my head, since I have not tried, but...
When you use the INTO clause, you are implying that you run in a 3GL environment, in this case, PL/SQL. But if it comes to PL/SQL, you have a BEGIN and END around all the instructions. You must have:
String sequnceDocumentId ="BEGIN SELECT snw_doc_type_map_id_seq.NEXTVAL INTO :1 FROM DUAL; END;" ;
-
AnyConnect 3.1 - the certificate on the secure gateway is not valid
Hi guys,.
I have a problem with the Anyconnect 3.1.01065.
When I try to connect I get the "the certificate on the secure gateway is not valid. A VPN connection can be established.
The certificate is a signed cert self.
Woks AnyConnect 2.5 without problems.
Image of the ASA: 8.4 (2).
[27.11.2012 15:58:27] Ready to connect.
[27.11.2012 16:01:49] Contact IP_WAN.
[27.11.2012 16:01:52] Please enter your username and password.
[27.11.2012 16:02:01] User credentials entered.
[27.11.2012 16:02:02] Establish the VPN session...
[27.11.2012 16:02:03] Checking for updates to profile...
[27.11.2012 16:02:03] Checking for updates...
[27.11.2012 16:02:03] Checking for updates of customization...
[27.11.2012 16:02:03] Execution of required updates...
[27.11.2012 16:02:08] Establish the VPN session...
[27.11.2012 16:02:08] Setting up VPN - initiate the connection...
[27.11.2012 16:02:09] Disconnection in progress, please wait...
[27.11.2012 16:02:13] Connection attempt failed.
Anyone had this problem before?
Thank you very much.
Hello Cristian,
Please see this:
CSCua89091 Details of bug
the local certification authority must support the EKU and other necessary attributes
Symptom:
The local CA on the ASA server currently does not support attributes like the EKU. This enhancement request is to add support for this. Workaround:
Configure the cert on the customer's profilehttp://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId= CSCua89091
And the following:
DOC: Anyconnect supports Extended Key use specific attributes in CERT
Symptom:
When using certificates with the anyconnect client if the certificate is installed on the SAA does not have the EKU attribute set to "Server authentication", then the anyconnect client will reject the ASA certificate as invalid. The certificate of the client id must also be '-l' client authentication "otherwise the ASA he will reject... Conditionsof :
Use a certificate of id on the ASA with one other than «authentication server» EKU
Use a certificate of id on the client that has one another EKU that '-l' client authentication.Workaround solution:
Generate a new certificate of ID with correct extended key usagehttp://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId= CSCty61472
If at this point, you need to set up the corresponding certificate or use an earlier version of the AnyConnect client.
HTH.
Please note all useful posts
-
First log in to Enterprise Manager 11 g: your user name and/or password is not valid
I installed the Selection of pre-designed programs developer-VM (for Oracle VM VirtualBox) named development VM application database, including Oracle Database 11g Release 2 Enterprise Edition.
I want to log in to Enterprise Manager with SYSMAN [connect as SYSDBA] user and password Manager, but it does not work.
So I decided to change the SYSMAN user.
[oracle@localhost ~] $ sqlplus/nolog
SQL> ALTER
USER
sysman
IDENTIFIED
BY
oracle;
I connected once more with sysman, oracle and sysdba password. But the connection failed with the error message: your user name and/or password is not valid.
Does anyone have an idea?
You can not join sysman as SYSDBA. Try SYSDBA.
You can only use the SYS user to connect as a sysdba OR if you have expressly given this 'sysdba' privilege to any user.
-
VSA and VSADs not mounted Manager time-out
I have some problem in my VSA environment. The first problem is that I can't access the Manager of VSA vSphere client. When I click on the tab is present me with a message "loading" red the a 'loading takes longer than expected, if the cluster is on a network reconfiguration mode disconnect and reconnect' and then eventually times out saying "the VSA Cluster is unavailable connection timed out: connect.
This brings me to my second question, which is the VSADs (two-node cluster) upward as inactive (not mounted) in vCenter. I can't ping the IP mount. However, I can ping the vCenter and two VSA management IP, as well as the IP Address of cluster service. However the management of the cluster (172.16.32.20) and NFS IP are not available.
I lost power to my lab and things have not stopped correctly. Since I put under tension, it was unavailable. I've included the VSA Manager log.
It seems to me the IP SAS is not. However, I do not know why?
Any ideas would be great there are machines that I really want to revisit those NFS mounts.
Hi Owen,.
From the description you posted, it seems that either your cluster in maintenance mode or that there is something wrong with the backend network prevents the adjoining VSA VMs between them.
You can check if the VSA VMS are in maintenance mode by using WSCli and getSvaServerInfo running. To do:
Open a console session (command prompt) on the server where the VSA Manager is installed.
Navigate to the directory that contains the file WSCLI.jar (C:\Program Files\VMware\Infrastructure\VSA Manager\tools\).
Run: java-jar WSCLI.jar
getSvaServerInfo Check the two VMS VSA. If they are both in maintenance mode, you can get them to come out of maintenance mode by running:
java-jar WSCLI.jar
exitMaintenanceMode Check the VMs got out of maintenance mode by running getSvaServerInfo again. With the two VM VSA out of maintenance mode, the address IP of Cluster should appear. Check if the cluster itself is in maintenance mode by running:
java-jar WSCLI.jar
getStorageCluster If the cluster is in maintenance mode, you can either take the cluster out of maintenance mode by running:
java-jar WSCLI.jar
exitStorageClusterMaintenanceMode Or, at this point, the VSA Manager must be able to connect to the Cluster and you can take the cluster out of maintenance via the user interface mode. Once this is done, your NFS shares must be online.
In case the system VMs VSA are not in maintenance mode, there is probably a problem preventing the VSA VMs to communicate. Indeed, even if the VSA VMS are in maintenance mode, if there is a network problem, you won't be able to remove them from the maintenance mode. So, if the steps above fail, first step should probably be to check networking (necessity of VMs to communicate on networks of front and background).
-
I want to activate 5.6 Lightroom. The application manager keeps telling me that my serial number is not valid. This is not the case. I bought it via Amazon.de and it worked a few months when I could always install Lightroom without the creative cloud. All solutions? Thank you!
See this thread for the info you need. You are probably trying to activate the version creative Cloud with your license key.
Try to install 5 Lightroom on 2nd unit, LR will not accept my license code
-
Windows 7 suddenly not valid/true.
After a holiday my work laptop tells me that my windows is not valid.
MGA Diag report below.
Tried to post with all of the automatic methods (slui slmgre and others)-TNA.
legitcheck.HTA does not work - the script errors. It runs via IE11.
The laptop has no more sticker - its 5 years and so is the top windows.
Lenovo W530.
Any advice?
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 50
Code of Validation caching online: 0xc004c4a7
Windows product key: *-* - J8D7P - XQJJ2-GPDD4
The Windows Product Key hash: xgsndMkYdJsYmUng0qIJ/thx + HI =
Windows product ID: 00371-868-0000007-85018
Windows product ID type: 1
Windows license Type: customer KMS
The Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {04FFBC7A-1650-4225-9A6E-4AA21B32083F} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Professional
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_ldr.160516 - 0600
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: fast
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: fast
Allow the Internet Explorer Webbrowser control scripts: allowed
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{04FFBC7A-1650-4225-9A6E-4AA21B32083F} 1.9.0027.0 6.1.7601.2.00010100.1.0.048 x 64 *-*-*-*-GPDD4 00371-868-0000007-85018 1 S-1-5-21-3042480492-2902352593-2062993632 LENOVO 24474 HG LENOVO G5ETA3WW (2.63) 20150918000000.000000 + 000DE3F0400018400FE 0809 0409 Romance Time(GMT+01:00) Standard 1 3 LENOVO TP-G5 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 Professional edition
Description: operating system Windows - Windows (r) 7, VOLUME_KMSCLIENT channel
Activation ID: b92e9980-b9d5-4821-9c94-140f632f6312
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00170-868-000000-03-1030-7601.0000-1132015
Installation ID: 018736590356259573056804542884157442288716712613926341
Partial product key: GPDD4
License status: Notification
Reason for the notification: 0xC004F200 (non-genuine).
Remaining Windows rearm count: 3
Trust time: 24/07/2016-19:15:13
Please use /ato slmgr.vbs to activate and update information on KMS clients in order to update the values.Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0xC004C4A7
Beyond: 0 x 0000000000000000
Event timestamp: 7:24:2016 19:02
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:--> HWID data
Current Hash HWID: NAAAAAAAAgABAAEAAAACAAAABQABAAEAln20VBwvPE + YZbyEvNXWqFBUfFtEDmwo7mOWYw ==Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20001
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC LENOVO TP - G5
FACP LENOVO TP - G5
HPET LENOVO TP - G5
MCFG LENOVO TP - G5
SLIC LENOVO TP - G5
TCPA PTL LENOVO
SSDT LENOVO TP-SSDT2
SSDT LENOVO TP-SSDT2
SSDT LENOVO TP-SSDT2
CO-SUBMISSION LENOVO TP - G5
FPDT LENOVO TP - G5
ASF! LENOVO-TP-G5
UEFI LENOVO TP - G5
UEFI LENOVO TP - G5
MSDM LENOVO TP - G5
SSDT LENOVO TP-SSDT2
SSDT LENOVO TP-SSDT2
LAURENCE INTEL SNB
SSDT LENOVO TP-SSDT2
UEFI LENOVO TP - G5
DBG2 LENOVO TP - G5According to your report, you use a Windows 7 KMS Client:
Windows product ID: 00371-868-0000007-85018
Windows product ID type: 1
Windows license Type: customer KMSBased on your report, you are currently using KMS license that requires that you enable with a KMS host. This is normally configured by an IT Department in a company to manage activations of clients on a network. This should be done every 6 months (180 days).
You must log into your company VPN or network/domain.
-
expdp using network_link (link not valid name)
Hi all
I have 2 database in the same host, namely SLAVE_PORT_NUM and orcl.
I want to execute data expdp orcl on a network_link to the location of the directory of slave_port_num. (expdp is executed in slave_port_num)
On the source database
PUMPUSE@ORCL 26 Aug 15 21:31:58 > display the db_name parameter
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
db_name string orcl
PUMPUSE@ORCL 26 Aug 15 21:47:15 > show user
The USER is 'PUMPUSE'-'r '.
PUMPUSE@ORCL 26 Aug 15 21:45:01 > select * from test;
A
----------
1
On the basis of data target.
PUMPUSER@orcl3 26 Aug 15 21:42:32 > display the db_name parameter
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
db_name string SLAVE_PORT_NUM
PUMPUSER@orcl3 26 Aug 15 21:53:02 > show user
The USER is "PUMPUSER" - with an 'r' to the difference in the source database
[oracle@SJOAM path] $ tnsping orcl
Use settings files:
/U01/app/grid/product/11.2.0.4/grid/network/admin/SQLNET.ora
TNSNAMES adapter used to resolve the alias
Try to contact (description = (address_list = (address = (protocol = TCP)(host=SJOAM.oracleszejie.com) (PORT = 1521))) (connect_data = (service_name = main.oracleszejie.com)))
OK (0 msec)
PUMPUSER@orcl3 26 Aug 15 21:48:30 > select * from user_db_links;
no selected line
PUMPUSER@orcl3 26 Aug 15 21:48:36 > create orcl database link to connect to PUMPUSE identified by abc123 using "orcl".
Database link created.
PUMPUSER@orcl3 26 Aug 15 21:49:05 > select * from test@orcl;
A
----------
1
With the database link "orcl" working on the db (slave_port_num) of the target, I issue the following
[oracle@SJOAM path] $ expdp pumpuser/abc123 network_link = orcl dumpfile = orcl.dmp = logfile = export.log export directory
Export: Release 11.2.0.4.0 - Production Wed Aug 26 21:50:40 2015
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production
With partitioning, Automatic Storage Management, OLAP, Data Mining
and Real Application Testing options
ORA-39001: invalid argument value
ORA-39200: link name "orcl" is not valid.
ORA-12154: TNS: could not resolve the connect identifier specified
[oracle@SJOAM path] $
Why it does not work when you use expdp, but when inside the database, select by using the link "orcl" works of db.
Please notify.
Kind regards
Noob
> Hi Pavan and all,.
>
> I just want to clarify my understanding on expdp over a network link.
>
> 1) source database = database in which I'll expdp data
(> Database 2) target = the database in which the expdp client will be executed
(> 3) link = database will be created on the target database and be connected to the source DB (user pumpuse)
(> expdp 4) = will be executed on the target database machine
(> expdp 5) user = user on the target database
>
> when I create a link db "orcl" on the target database to the source db and deliver expdp
> for example as below:
>
> network_link pumpuser/abc123 expdp = orcl dumpfile = dump.dmp = exportdir = schema directory a, b, c
>
> I'm actually
> target - connection to the database using the local account pumpuser
> - data export through binding database data source as pumpuse (without r) created
> - to the location of the target database directory
>
> I'm wrong?
YES, YOU ARE EXACTLY RIGHT. This is used if often it is supported. I see 2 reasons why you want to do that while I type.
1. you want to unload the source database and the target database is going to do some work for export on a running target database will unload everything from writing to the dumpfiles, by writing to the main table, etc.
2. If your source database is read-only, so you cannot run Data Pump export on this as Data Pump creates a table and writes in this table. If you have a different database, for example target a database, you can run expdp on it, because it is read-only and the source database cannot be read from.
So yes, you can do it. I don't know what the problem with your dblink, but it works and is supported.
Dean
-
Game-CDDrive operation is not valid due to the current state of the object.
It's been a while, please remind me how to put the code here? PSVersion 5.0.10105.0 VMWare PowerCLI AutoDeploy component 6.0 build 2358282 VMWare ImageBuilder PowerCLI component 6.0 build 2358282 license of VMware PowerCLI component 6.0 build 2315846 VMware vSphere PowerCLI component 6.0 build 2548068 VMware VDS PowerCLI component 6.0 build 2548068 Cloud of VMware Infrastructure Suite PowerCLI component 6.0 build 2548068 VMware HA PowerCLI component 6.0 build 2510422 VMware PowerCLI component Storage Management 6.0 build 2522368 trying to build a server from the ground using Powercli. Started with:
$paramVM = @{
VMHost = $vmhost
Version = "v7"
Name = "CompVM"
Data store = $datastore
DiskGB = 50
DiskStorageFormat = "EagerZeroedThick"
MemoryGB = 4
NumCpu = 1
Location = $Folder
CD = $true
ResourcePool = $ResourcePool
PortGroup = $portGroup
Notes = "DC of DOM"
Confirm = $false
}
$paramVM . Location | select *
New-VM @paramVM
It seemed to go very well.
Get-VM svr01mid100 | Start-VM
Then, something isn't quite right.
$paramNA = @{
StartConnected = $true
WakeOnLan = $true
Connected = $true
Type = « Vmxnet3 »
Confirm = $false
}
Get-VM chi01osm300 | Get-NetworkAdapter | Set-NetworkAdapter @paramNA
, I get the error: Set-NetworkAdapter: 29/07/2015-18:44:36 Set-NetworkAdapter operation is not valid due to the current state of the object. Online: 9 char: 43 + Get - VM svr01mid100 | Get-NetworkAdapter | Together-NetworkAdapter @paramNA + ~ ~ ~ + CategoryInfo: NotSpecified: (:)) [game-NetworkAdapter], VimException + FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomation.ViCore.Cmdlets.Commands.VirtualDevice.SetNetworkAdapter MacAddress: 00:10:56:ss:3f:ab WakeOnLanEnabled: true NetworkName: SameAsAbove Type: Vmxnet3 ParentId: VirtualMachine - vm - 108361 Parent: svr01mid100 Uid: /VIServer = Dom\[email protected]: 443/VirtualMachine = VirtualMachine-vm-108361/NetworkAdapter = 4000 / ConnectionState: logged, NoGuestControl, StartConnected ExtensionData: VMware.Vim.VirtualVmxnet3 Id: VirtualMachine-vm-108361/4000 name: NIC 1 Client: VMware.VimAutomation.ViCore.Impl.V1.VimClient )
Get-VM svr01mid100 | Get-CDDrive | Select Name,IsoPath
Name IsoPath - CD/DVD drive 1 C:\ PS > Get - VM svr01mid100 | Get-CDDrive. Game-CDDrive - IsoPath $isoPath - StartConnected $true - confirm: $false Set-CDDrive: 29/07/2015-18:50:39 Set-CDDrive operation is not valid due to the current state of the object. I disconnected and then reconnected my session. I tried to see what was going on in vCenter (which I never do) and I fount it tries to start with the ISO, but giving a frown face and reboot again. I think that he did not like something in the build of the server. Help!
I don't know that I did it is clear enough. The new VM script seems to work, it creates a new virtual machine.
But eventually, every setting change that I try to do on the virtual machine, I get an error stating that "the operation is not valid due to the current state of the object."
It seems to take the configuration but then I noticed he tried to start, but it started getting the error that I put in the screenshot.
To me, that shows that it is trying to boot from the CD, because it is a Windows error. Moreover, he just trying to start several times.
Now, I went back and I think that the error "operation is not valid due to the current state of the object" may have been the fact that the VM tried to boot from the CD over and over, this is what is meant by the current state.
I noticed just here, the hosts have 4.1 on them, which does not support r2 Server 2012.
I think we're good. Thank you!
-
Hello guys!
I've been googlin everywhere, but impossible to find a solution to my problem. I hope that one of you, qualified people can point me in the right direction :)
I created a powerCLI script to take a snapshot of our most important servers before we do our weekly maintenance. The idea to run the script as regular powershell script and then have
- Add snap-ins powercli and connect to virtualcenter servers
- ask the VC servers to virtual machines in a perticular folder
- Loop foreach on these servers to create a snapshot with the name $snapshotname
Currently, I just do it turn on a test folder that I created in vSphere that contains 3 test VMs:
- Testmagne1 - normal operation
- Testmagne2 - I renamed the folder for this virtual machine in the data store to generate an error.
- testmagne3 - normal operation
Since the servers (not the test servers, but good ones) is the most important servers in our environment, I want to be able to catch exceptions and errors when I run this script. I do this with the Try - Catch - Finally works.
The strange thing is:
The release of Powershell/PowerCLI is different from the output in VirtualCenter (!)
In virtualcenter, the output is as follows
- Testmagne1 - snapshot is created successfully - as expected
- Testmagne2 - the snapshot creation fails because it cannot find the files .vmx - as expected
- Testmagne3 - snapshot is created successfully - as expected
However, the exit in powercli is slightly different:
- Testmagne1 - snapshot is created successfully - as expected
- Testmagne2 - creation of the snapshot fails because it cannot find the files .vmx - as expected
- Testmagne3 - snapshot fails with the error message: operation is not valid due to the current state of the object - huh?
Apparently once the first error is generated all succeeding VMs get error "the operation is not valid due to the current state of the object"
I've been pulling trying to figure this problem on my hair, but I'm not getting anywhere
Here is some additional information:
1. the Script (abridged version of it. It generates the same error):
-STARTUP SCRIPT-
$ErrorActionPreference = "stop".
Add-PSSnapin VMware.VimAutomation.Vds, VMware.VimAutomation.Core | Out-Null
SE connect-VIServer VIRTUALCENTER1, VIRTUALCENTER2 | Out-Null # Sensored VirtualCenter names
$servers = get-VM-location 'testfolder '.
$snapshotname = 'Testsnapshot '.
$verifycreatesnapshot = Read-Host "you are about to create snapshots for $servers. Do you want to continue? o/n.
If ($verifycreatesnapshot - eq 'y') {}
Write-Host "snapshots of creation...". »
{ForEach ($i in $servers)
Write-Host "instant Creation for $i."
Try {new-Snapshot - VM $i - name $snapshotname |} Out-Null}
Catch {$_.exception | select *;} Write-Host "Unable to create the snapshot for $i" ;}
}
Write-Host "command finished.
}
else {Write-Host "Operation canceled by user"}
Read-Host "end of the script. Press ENTER to close. "
------------------ END SCRIPT -------------------
2. the PowerCli error messages:
Error for Testmagne 2 (as expected):
File: [DATASTORE114] testmagne2/testmagne2.vmx
DynamicType:
DynamicPropertyInternal:
FaultCause:
FaultMessage:
ErrorId: Client20_TaskServiceImpl_CheckServerSideTaskUpdates_O
perationFailed
ErrorCategory: NotSpecified
TargetObject:
RecommendedAction:
SessionId:
ConnectionId: /VIServer = SENSORED: 443 /
Severity: error
Message: 31/10/2013-10:52:16 New-Snapshot the operat
ion for the entity 'testmagne2' failed with the follo
the wing's message: "file [DATASTORE114] testmagne2/testmagn".
E2.vmx was not found.
Data: {ParameterValues}
InnerException: VMware.Vim.VimException: exploitation of the entity
'testmagne2' failed with the following message: 'thread '.
testmagne2/testmagne2.vmx e [DATASTORE114] was not crazy
ND ".
TargetSite:
StackTrace:
HelpLink:
Source:
Failed to create the snapshot for testmagne2
Error for testmagne3:
Creation of snapshot for testmagne3
ErrorId: Core_BaseCmdlet_UnknownError
ErrorCategory: NotSpecified
TargetObject:
RecommendedAction: An error occurred when executing command: new-Snapshot. I have check
f exception for more details.
SessionId:
Login ID:
Severity: error
Message: 31/10/2013-10:52:17 instant New-capture operation is not
valid due to the current state of the object.
Data: {ParameterValues}
InnerException : System.InvalidOperationException: operation is not valid from
e to the current state of the object.
at VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCo
reServiceProviderImpl.BeginTaskCompletionPoll (list 1 taskLi
St)
at VMware.VimAutomation.Sdk.Impl.V1.Task.CoreTaskService
Impl.WaitForTask (IEnumerable 1 taskList, ProgressCallback p
rogressCallback)
at VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.BaseCmdl
and. EndProcessingErrorHandled()
at VMware.VimAutomation.ViCore.Util10Ps.BaseCmdlet.BaseC
mdlet. EndProcessingErrorHandled()
TargetSite: Sub ThrowTerminatingError (System.Management.Automation.Err
orRecord)
StackTrace: At System.Management.Automation.MshCommandRuntime.ThrowT
erminatingError (ErrorRecord errorRecord)
HelpLink:
Source: System.Management.Automation
Failed to create the snapshot for testmagne3
3 PowerCLI version
PowerCLI Version
----------------
VMware vSphere PowerCLI 5.5 Release 1 build 1295336
---------------
Versions of the snap
---------------
VMWare AutoDeploy PowerCLI component 5.5 build 1262826
VMWare ImageBuilder PowerCLI component 5.5 build 1262826
License of VMware PowerCLI component 5.5 build 1265954
VDS's VMware PowerCLI component 5.5 build 1295334
VMware vSphere PowerCLI component 5.5 build 1295334
4 VirtualCenter version
VMware vCenter Server Version 5.0.0 Build 913577
vSphere Client Version 5.0.0 Build 913577
Hosts: VMware ESXi 5.0.0 Build 914586
If you need additional information, let me know
Any help is greatly appreciated
Thank you!
-Loincloth
Definition - ErrorAction Stop locally on the cmdlet will not solve the problem. We have found and solved the problem and the fix will be available in the next version. Until then, you can use the $error variable to detect whether the cmdlet was successful or not. You can clear the $error variable before calling the cmdlet and check if it's still empty after the call.
-
virtual machines are named as unknown (not valid)
Hallo,
I run ESX 4.1 and vCenter 4.1 on Win2003.
I need help after that I run a security script on my esx servers, after you restart the ESX ESX Server does not detect all the VMS correctly.
Some not detected machines and this is bad it detects the vcenter4.1 and its only sql server as unknown (not valid), so for the moment I can only connect each ESX Server it self but not for the vCenter :-(.
See the screenshots.
Some of the virtual machines on storage are very good and I could 'add to the inventory', but this damaged machines see you in the screenshot number two do not have the opportunity to "add to the inventory" and also, you see the icon before the .vmx is not visible.
It looks like that some how the vmx. the files are corrupted?
What can I do? There is some repair auto or auto currupted file cleanup tasks?
Best regards
Dirk
Hello Dirk,.
You can try the following:
-> Poweroff invalid virtual machines
-> remove inventory
--> Ensure that nothing of the invalid virtual computer processes are running on the host computer (ps auxwww | grep-i vmx and vm-support - x)
->, restart the services on the host management
-> add them to the inventory
If this does not work, you can unsubscribe the VMs and create a new VM containers, but instead to create a new virtual disk, you will point to the existing VMDK.
Let us know how it goes...
-
"missing or not valid customization information resources library missing" on CS2
Problem:
I just installed CS2 on my Gateway desktop computer the other day. I was unable to use CS2 because I maxed out my code series on another laptop for work. I went a head and deactviated the serial number for CS2 and uninstalled on the laptop. I could use the CS2 on my Gateway desktop computer and transfer code series.
I go to my office and the CS2 still doesn't load right. Okay, so I try to uninstall the CS2. But there is no uninstall file and it does not appear in the uninstall Manager in Windows 7. So go a head and remove the majority of the CS2 in my program files and then try to reinstall a new copy of CS2. I get an error "missing or not valid customization information missing resource library.
How can I work around this new error? If I can reinstall a working copy of CS2 on my desk. It's a little frustrating. Anyone experienced the same problem? Any ideas would be great. Thank you
-Brian L
System using:
Gateway DX4822 Office Windows 7 family
Intel 2 quad CPU Q8400 @2.66
My Favorites long ago: http://kb2.adobe.com/cps/325/325739.html
Note to the op... you are in territory dangerously unsupported. I advise you to upgrade to CS4.
You must purchase the correct upgrade: we find the CS4 Design Premium from CS/CS2 on Amazon http://bit.ly/6TRpBc . You can buy anyone is allowed, but make sure you buy the correct upgrade.
Bob
-
The address is not valid problem when opening new tab
opening of firefox (I crash usually close under Task Manager), it reloads all tabs as it should.
But when you open a new tab, I get "the address is not valid.
I tried all the parameters of the start of the blank home page and latest opening option.
I have tried all suggestions in other markets, reset... Subject: config
I wish it had a document giving detailed information for all parameters
When on the topic: config and search newtab, the only user adjustment (not default) is
browser.newtabpage.storageVersion; 1 and I tried 0,1,2,3,4,5 restart no change even between the two.
Have been re-intall, reset, safe mode, nothing works
the tab works normally after the error, which means that I can start typing in the address bar and even complete works of auto... I restarted just fz and he did a 27.0.1 update
that did not fix it either... I'm bored of the default page of fx that has recent photos.
-
' invalid url ' / ' is not valid "appears only for my laptop
I received the message "invalid url requested url ' / ', is not valid.»»» "Reference number #9.3e556acb.1337262673.220f958c.
This message only appears for the facebook Web page. other website is fine. Only my laptop I have this problem, my laptop a friend connected to the same line have also no problem. Have you tried different and equally impossible to connect to facebook browser. Have also tried to http and https, and still the same result
Have you tried many solutions found on the internet such that: 1) start in safe mode
2.) setting internet network for "Auto search proxy.
3.) reboot pcI can't restart cause modem I use line hostel.
Hi, I fixed my problem by using the information in the http://dotnetfish.blogspot.com/2012/05/facebook-invalid-url-requested-url-is.html blog, hope this can solve your problem as well. May not the browser but the setting in the hosts file.
-
OfficeJet 6968: 6968 HP will not accept Deafult Gateway
Hello. Just bought a new printer HP 6968. Was configuring the static IP address and get an error the default gateway is not valid.
The parameters I tried I actually used with my computer so I know they are very well; However, they do not work with the HP printer. The problem seems to be that the IP address and the gateway address differ in the last two digits. IE: printer IP 198:162:1:69 and the 198:162:2:1 of the default gateway. If I try to set the third maching printer numbers then the printer accepts the parameters but of course has no network connection. Our network of offices has many computers, printers and other devices configured in the same way that gateway with an IP address using different numbers in the two last digits. Other printers that we have in the Office have no trouble to take similar parameters. If at this point, I am at a loss to know how to get the printer on the network and the search to return.
Any help is very appreciated!
Thanks, Mike
Reset the printer to the default network. Now, set your static IP address in the printer, but not the same as the gateway 192.168.2.1.
Make sure that your static IP address is outside the range of the DHCP of the router yhour.
Maybe you are looking for
-
Upgrade to Mac OS Sierra and all my accounts now have Standard permissions, i.e. without administrator permissions. How I either upgrade my administrator account or find the password for Root?
-
Problem with Simulink model dll running on target RT
Hello! At the beginning I specify software and hardware that I use: LabVIEW 8.5 Simulation Interface Toolkit 4.0.0 Microsoft Visual C++ 6.0 MATLAB 7.4.0 (R2007a) NEITHER cRIO-9014 At first, I did a simple Simulink model (Sine generator, gain and an o
-
where can I get the driver for the Samsung Galaxy S2 for windows xp home sp3
When I tried to connect my Samsung Galaxy S2 (SGH-i777) with my desktop computer, he sees the phone as a new samsung android (digital camera). Then Assistant research for this camera and concludes in addition it (ver 5.1.2600.0) Samsung Mobile device
-
Pegatron IPMTB manual - TK of motherboard?
I'm looking for the manual for the IPMTB-TK Pegatron. I found the layout, but I would really like to have the manual. I would like to know where the header of 4 pins for the CPU fan. I have not had time actually looking at the motherboard, but does n
-
ATI Theater 650 Pro digital tuner not detected / installation in Media Center
I have Vista Ultimate 64 with SP2 and an ATI Theater 650 Pro with the latest driver installed ATI. Media Center does not detect and configure the digital tuner, only analog (tuner works very well - get all analog and digital - channels in Win7 RC). O