vSAN Quick Start for evaluation

Similar Questions

• Quick start for Windows 10: Satellite Mini click and others

  I had some problems with the camera and the battery on the Mini click and another Tablet from the Point of view (Holland).

  He occurered that after updateding etc. on drivcers restart the old problems would return that was due to the quick start option that is set in the bios NLE, but can also be disabled
  Settings > Power Options > Ssettings change existing > Shut doen settings > turn on TASF start [Uncech box]

  It seems that some applications don't close properly when you use the option stop and Hibernate in the memory of QuickStart.

  This occurs if you use either reboot option to turn off manually with a second 10 press the manual power button

  A note to tell you that you can also find the option above via
  Control Panel > hardware and sound > power options > etc.

• "HP Quick Start" for Windows 8

  I have a new Pavilion g6 Prod ID 2269wm: C6P02UA #ABA.

  One of the first downloads via Support Assistant included 'HP Quick Start' worm 1.0.4660.30220, Softpaq SP59322.

  The installation failed. Should what steps I take to solve the problem?

  Thank you, hstj

  Install manually:

  http://support.HP.com/us-en/document/c03557078

• Quick start for T420s - where is the download link?

  Hello

  As the title suggests the download link was fired for RapidBoot - why?

  I can't find anywhere?

  Can you tell me a direct link for the 64 bit version of Windows 7 or tell me why they just pulled on it?

  Thank you

  Hi DangerMouse,

  He's been fired from download sites. Please see this thread in the ThinkVantage Board.

  Sorry, it's probably not what you wanted to know

• The simple question is "where can I find the installer for the HP Quick start?

  The simple question is "where can I find the installer for the HP Quick start?

  BESR regards

  Hello:

  And here's one for W8...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_140915_1#tab1

• Bug report - activate the quick start causes filesystem corruption and loss of data for Windows 8 NTFS when it is used by Windows 8 and Windows 2008R2SP1

  My hard disk configuration is as follows:

  Disc 1: 0.5 terabytes
  Disc 1 - Partition 1 Windows 2008R2SP1
  Disc 1 - Data Partition 2
  Disc 2: 1 terabytes
  Disc 2 - Partition 1 Windows 8
  Disc 2 - Data Partition 2
  After you install Windows 8 RTM and used for about half a day, I started in Windows 2008R2SP1. From the start in Windows 2008R2SP1, I had "one of your disks needs to be checked for consistency", and it proceeded to chkdsk both the 2008R2SP1 and Windows drives data. No problems were detected
  I don't think a lot of it... and goes to copy several files from disc 1 - 2 Partition on drive 2 data - data Partition 2
  Then, I started Windows 8 RTM one 2 weeks later and told me that 'one of your drives should be checked for consistency", and it proceeded to the chkdsk disk 2 - data partition 2 and found a small number of questions. But after that, all files, I had copied in 2 Disk - Partition 2 data were GONE!
  So I decided to reboot and start Windows 2008R2SP1... and I got the "one of your disks needs to be checked for consistency" again this time what we found thousands of questions! He supposedly fixed, but my files (more than 200Gbytes) still LEFT!
  I believe that it is this same problem: the bug - report serious corruption of system files and loss of data caused other NTFS de Windows 8 CP readers but I think it was not fixed on CP, and it is now on GTR!
   
  One more thing why this site (http://answers.microsoft.com) don't have any option to ask questions about Windows 8 RTM? I had to choose' other/unknown '
   
  Update:
   
  I found another thread in this forum about the corruption of NTFS when dual boot: http://answers.microsoft.com/en-us/windows/forum/windows_cp-performance/can-dual-boot-windows8-x64-and-windows7-x64-cause/d89a58fd-cde5-41f5-b49d-8c84f79f46ac
   
  I also found this: http://social.technet.microsoft.com/Forums/en-US/W8ITProPreRel/thread/1be71590-1f43-4525-a341-26bdbccdb9df
   
  Apparently if you use the option "Turn on the quick start (recommended)" in your Power Options, when you turn off your machine, it's not really turn and that's why he won't let NTFS in a consistent state, and so, if the disc is read by another Windows, it will try to 'fix' cause corruption...
   
  This could mean, even a double start between 2 windows 8 facilities system would auto destroy...

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link for your question.

  Windows Server 2008 IT Pro Networking Forum:

  http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general/threads

  Kind regards.

• How can I put an icon for quick start on the desktop, to format dvd - rw discs

  Hi all. I am a novice with a pc and would appreciate an answer to my problem, when I put a dvd on to back - up, I usually get the message on sceen saying that the dvd will be formatted, how I put that system on my desktop at the top of the page, as an icon of quick start, I have a number of discs dvd - rw with stuff on them that I want to remove in order to use the same. hope you can help.

  with friendly, J, Sheppard.

  Hello

  Built into Windows

  Erase a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/erase-a-CD-or-DVD

  Erase a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows7/erase-a-CD-or-DVD

  The Navigation pane is in the main panel of Start - computer

  Excellent forum for questions of CD/DVD
  http://www.myce.com/

  =======================================

  How to erase a CD-RW/DVD-RW. Free, fast, easy.
  http://www.YouTube.com/watch?v=NEiNxXgEJbY

  BurnAware Free is a CD, DVD, Blu - ray disc burning software. It is ideal for users with basic
  burning needs as backup, creating data, audio, MP3 music, DVD-video and disc to disc burning
  images. Free, easy to install, it allows you to save your files to disc quickly and offer clean,
  flexible interface for you help complete your burning tasks much faster (free)
  http://www.BurnAware.com/

  Active @ DVD Eraser is a free easy to use to erase the DVD - RW, DVD + RW or CD - RW media
  to clear the old data of the disk. There are two methods of deletion: (Freeware)
  http://www.NTFS.com/dvd_eraser.htm Active @ ISO Burner 2.1 is a simple to use dialog box style to burn a CD/DVD/Blue Ray ISO software
  images are compatible with the ISO 9660 standard. Automated burning is also supported. (Freeware)
  http://www.NTFS.com/iso_burner_free.htm

  ImgBurn supports a wide range of file formats image - including BIN, CUE, DI, DVD, GI, IMG,.
  ISO, MDS, NRG and PDI. It can burn the Audio CD of any type of supported via DirectShow file.
  ACM - including AAC, APE, FLAC, M4A, MP3, MP4, MPC, OGG, PCM, WAV, WMA and WV. You
  can use it to create DVD video discs (from a VIDEO_TS folder), HD DVD video discs (from a HVDVD_TS folder) and Blu - ray video discs (from a BDAV / BDMV folder) with ease. It supports
  Names of Unicode folder/file, so you should not experience problems if you use an international
  character set. ImgBurn takes over all the Windows of the OS - Windows 95, 98, Me, NT4, 2000, XP,.
  2003, Vista, 2008 and 7 (including all the 64-bit versions). If you use the wine, it must also run
  under Linux and other Unix-based x 86. It is a very flexible application with several advanced
  characteristics that are often lacking in other tools, especially when it comes to burning DVDs video
  discs. It supports all recent orders without the need of updates (including booktype / bitsetting /)
  Advanced settings on many of the most important - i.e. BenQ, LiteOn, LG, NEC, Plextor, Samsung,.
  Sony). (Free version)
  http://www.ImgBurn.com/index.php?Act=guides

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to make large icons for all elements of quick start?

  Original title: large icons in quick start.

  I have five different 'users' on my XP (SP3).  Some of them allow to establish large icons from quick start, others not.  How to make the great icons of all Quick Start icons?

  I found for myself that all you have to do is click with the right mouse button on an empty area inside of the quick launch area, choose the top menu, click on 'View', click on 'large icons '.

  That's all it takes!

  F H

• I always get requests to update on my office home page. After the most recent, most of my quick start icons are badges of adobe. Except a few functions are not open. When I right click on Firefox (for example) it says 'READ' instead of 'OPEN' and t

  I always get requests to update on my office home page. After the most recent, most of my quick start icons are badges of adobe. Except a few functions are not open. When I right click on Firefox (for example) it says 'READ' rather than 'OPEN' and then displays the Adobe error box. The only other answer I received (from Ask.com) is that the update was a virus. I'm not computor savy and my pc is quite old. I just want to come an hour before this recent action, but I can't open Norton power eraser or even the ability of the computer to return to an earlier point in time to cancel the action. Each of these attempts of task appears Adobe error box. I am currently showing Adobe Reader X 10,0

  Hi deanrlh,

  I apologize for the inconvenience caused. Please follow the steps in the below article mentioned: Application, file icons change in Acrobat/Reader icon

  Thank you

  Abhishek

• Satellite Pro C50-A-1E2: problem get into BIOS after the activation of the quick start

  Hello

  I own Satellite Pro C50-A-1E2.

  Default hard drive has been replaced by a v300 kingston ssd. I also enabled quick start.
  I am trying to get into the BIOS but without success.

  I tried all possible combinations (Esc, DEL, f1, f2, f8, fn + esc, f1... fn)

  I found this piece of information through Googling: "press f2, and then press power. But always without success.
  Help with my problem?

  Thank you.

  Hello

  Quick start can be enabled and disabled too using the Toshiba software called Desktop Help. Within this tool, you would find the HWSetup Toshiba and this part of software must contain the quick start option.

  Check it out.

  By the way: for some series laptop, press INS key then F2 worked too.

• Z400 workstation: Workstation Z400 has quick start?

  I read online about some BIOS offer everything including a quick start instead of test during the boot upward. The Z400 offers such a thing as which would speed up boot time a lot.

  Hello

  Some computers have a feature POST bypass, but I wouldn't recommend using it.  You can find it in the BIOS if it is available for your PC.

  After a death off voltage then launch Manager tasks and look under the start for the last time in BIOS tab. More sophisticated motherboard is more time in BIOS.  Technology memory channel triple and quadruple take longer to initialize.  Using RAID will also slow down the BIOS time.

• What happened to my show desktop icon in the Quick Start menu when I upgraded to Firefox 4?

  I value and often use the button SHOW DESKTOP which has always been in my QUICK START MENU... until I recently upgraded to the latest version of Firefox because he promised to be faster (and my experience online in spite of paying for "high speed" is anything but fast!). I see that the icon was not just moved but DELETED and I'm not at all happy about it. What happened and how I get it back? Thank you. (By the way, I don't want a fancy with a bunch of words irritable instructions. I need the answer in a format that can follow a student of 1st year. (Thank you.)

  You can create a new shortcut easily enough. Just drag it into the Quick Launch bar on with the right mouse button and then choose "Create shortcut here" from the menu you get.

• HP Quick start

  OK, so my laptop running windows 8 (now 8.1) came with preinstalled HP QuickStart.  I was wondering if there is anyway that I can install or something similar on the new computer laptop of my sisteer who does not.  She's going crazy without a start menu.

  Ghostlyone, welcome to the forum.

  This is the Quick Start Application for your sister.

  Please click on "BRAVO Thumbs Up" if I helped you and click on "Accept as Solution" If your problem is resolved.

• Lenovo Z500 turns off a few seconds after the round. He started for the second time.

  Hello

  For several days my Lenovo Z500 is a strange problem. When I push the turn on button laptop starts up and shuts down after a few seconds when the windows logo appears. When I push again the button it starts fine with no problems.

  I have a Windows Professional 10, everything was ok for a while and now I don't know how to solve my problem.

  I'm going to enjoy all the ideas.

  I thought to reinstall Windows, but maybe you know the solution to fix it.

  P.S. I have the latest version of the BIOS installed.

  Kind regards

  Albert

  I think I solved the problem.

  Problem has been activated "quick start" in the power settings.

  To turn off the quick start, follow these instructions:

  1. Open the start screen
  2. type po drank directly on the start screen (power buttons short for). It will take you directly to the applet "change what the buttons to" in the search results.
  3. Click on the link "Change settings that are currently unavailable" to put at the disposal of the shutdown options.
  4. Uncheck the enable (active)-quick start .
  5. That's all. Now the quick start feature is disabled.

  Now everything works fine, z500 boots each time correctly with the first run.

  Thanks LenBlazer.

• Quick Menu for Canon PIXMA MX452 software

  Whenever I click on the program of Quick Menu for the product in question, I get the following error message:

  Quick menu Canon stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available.

  I've uninstalled and reinstalled the driver and software Quick Menu several times, both the disk and online downloads.

  I turned off my anti-anti-virus/firewall program and also said the security program the program of Canon is a trusted application.

  I am able to print/scan/copy, but not on the Quick Menu, which is more convenient.

  Help, please.

  Hi clarkdjensen,

  There may be a third scanner driver interferes with the Quick Menu.  Please, try the following:

  1. click on 'Start' and then on 'computer '.

  2. in the left pane, click the arrow next to the record Local (c).

  3. click on the arrow next to Windows to open the folder

  4. highlight the twain_32 folder.

  5. the folder should have 2 folders that begin with PIXMA MX452 and a file called wiatwain.ds.  Other folders or files must be moved to the office.

  6. restart the computer and try to scan the image.