vsga and vdga change

Similar Questions

• GRID K2 vSGA and vDGA Stats

  Hi guys,.

  I have set up on my card GRID K2 vSGA and vDGA.

  I have a desktop dedicated with 1 GPU attached and with dxdiag appears Nvidia GRID K2.

  I have several offices shared using vSGA.

  Both work as expected.

  However when I go to the command line and run the command of nvidia-smi it shows only 1 on the GPU. Now I know what GPU covers desktop vSGA because if I run an application in one of these workstations GPU-Util increases. So why I don't see the use of the GPU vDGA / not even arises? Is this a normal behavior? If so, how can I see the performance of the dedicated GPU?

  Thank you very much

  Luke

  This is normal/expected since the ESX do not see the GPU that you went through to the virtual machine with vDGA.

  To vDGA, you will need to get inside the virtual machine statistics.

  Linjo

• question General vSGA and vDGA

  Hello

  Need to clear somethings

  If I have a server with 1 x grid K2 card and to use graphics hardware acceleration that I need to either install the driver ESXi Nvidia vSGA or vDGA right?

  If I choose to install the driver nvidia for vDGA I can only configure 2 vms for this dedicated right GUs?

  If I choose to install the driver nvidia for vSGA I set up as mush as the memory on the NIC and host memory are able to right? (half mem GPU, mem half host)

  What is the main difference between K1 and K2 of the grill rack, is just that the K2 2 GPU?

  No matter what expirience with the help of CAD applications on vSGA, im thinking performance etc... problems a user of CAD often must be vDGA (I know it depends on the application, but what's your expirience)?

  > If I have a server with 1 x grid K2 card and I have to use graphics hardware acceleration either to install ESXi Nvidia driver for vSGA or vDGA right?

  VSGA to install a VIB (pilot) from Nvidia, for vDGA that you don't need to install any driver on the ESX, but in the virtual machine.
  

  
  

  > If I choose to install the driver nvidia for vDGA I can only configure 2 vms for this dedicated right GUs?

  Correct, but you could also have a configured with vDGA and one with the vSGA

  
  

  > If I choose to install the driver nvidia for vSGA I can configure as mush as the memory on the NIC and host memory are able to right? (half mem GPU, mem half host)

  You can assign max 512 MB to each virtual machine, half will come from the GPU, the other half of the memory of guests as overhead.

  
  

  > What is the main difference between K1 and K2 of the grill rack, is that only the K2 has 2 GPU?

  K2 have 2 GPU:s and 8 GB of memory, K1 4 GPU:s and 16 GB of memory. The GPU:s are very different, but, the K2 have 2 Quadro K5000 and K1 have 4 Quadro K600.

  > Any expirience with the help of CAD applications on vSGA, im thinking performance etc... problems a user of CAD often must vDGA (I know it depends on the application, but what's your expirience)?

  I have some experience and to be honest its very difficult to say at the outset that the technology that will be more suitable. I recommend to install a few test machines and let real users to evaluate.

  For one of my clients, they found the solution not to appropriate to their main designers but are several other usecases, teleworkers, construction sites, scenarios of training partner, access, etc. that makes the very successful solution.

  
  

  You could also have a look at the newly announced Nvidia vGPU technology that will be available with vSphere 6.

  Linjo
  

• vsga and vdga on the same host

  Hello

  Is it possible to have different pool created on the same host and have some VM (pools) that use VSGA and other virtual machines (pool) that are using VDGA on the same host?

  Yes it works very well! (Assuming you have at least 2 GPU:s or Board with more then a GPU as a K1 or K2)

  Linjo

• I forgot my answer to the security question, now I want to change my answer and to change their application asks me for my old answer which I forgot how can I change my answer to my security questions

  I forgot my answer to the security question, now I want to change my answer and to change their application asks me for my old answer which I forgot how can I change my answer to my security questions

  When I had the same problem, I used the solutions here If you have forgotten the answers to the security of your questions - Apple Support Apple ID

• I changed my point of view screen to "maximize" and then changed back to normal and "applied" this change. The view on my screen moves back between the two.

  I went on 'Properties' and then changed the screen to "maximize" that was impossible to navigate.
  I then reset the command on the screen 'Normal' then 'Apply' and 'OK '. Now when I open Firefox it
  by default, the maximum size of the screen. No matter how many times I try to re - configure
  the size of display screen, the default browser to the Maximum size. Nothing works!

  You can check if you have a user.js file in the Firefox profile folder that affects the pref browser.sessionstore.resume_session_once true value.

  • http://KB.mozillazine.org/browser.sessionstore.resume_session_once

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

  See also:

  • http://KB.mozillazine.org/Preferences_not_saved

• You need to reset and or change my old icloud account of moms on the phone with another. When I try to reset it with the information that we know that it says "blocked account"

  You need to reset and or change my old iCloud account of moms on the phone with another. When I try to reset it with the information that we know that it says "blocked account"

  ACCOUNT SAFETY CONTACT NUMBERS

• I've just updated FF 14.0.1 (Mac 10.6.8) and now netflix won't work. He is asked to restart in 32-bit mode and I changed in the Get Info to 32-bit. No luck.

  I've just updated FF 14.0.1 (Mac 10.6.8) and now netflix won't work. He is asked to restart in 32-bit mode and I changed in the Get Info to 32-bit. No luck.

  Yes, I have the same problem. Silverlight 4 does not work in Firefox 14.0.1. Used to use only "restarting in 32-bit mode", but now, who is caught in a loop without end. Silverlight 5 will work, but the video is choppy so badly that it is very bad. I think it's a fall frames in all directions.
  Someone needs to fix this problem yesterday.

• I installed the version 9.0.1 v10 Firefox has crashed maybe 20 times since then. The previous version almost never crashed AND it changed as if by magic of my network connection settings.

  I installed the version 9.0.1 v10 Firefox has crashed maybe 20 times since then. The previous version almost never crashed AND it changed as if by magic of my network connection settings. disable/change actually my DHCP
  -J' I disable all my Add-ons and rebooted w/no probs but it's crazy.

  I found a FF v9 online and install it. So far it works. I'll pass on challenging FF v10

• I created a budget using models and cannot change it

  I created a budget using models and cannot change it.  When I open it I can't do anything with it!  I'm stupid or what?

  Like Emily Litella, Neve rmind!

• change my phone number and cannot change the keychain

  Dear,

  gently, I changed my phone number and cannot change the keychain

  You try to make the change in the preferences/iCloud/Keychain/Options of the system? What happens when you try?

  City link below.

  • The device that uses the SMS compatible phone number you provided when you set up first iCloud keychain. A verification code is sent by SMS to the phone number. If you can not access this number, Contact the Support of Apple, which can verify your identity so that you can run the installer on your new device.

  Frequently asked questions about iCloud Keychain - Apple Support

• I forgot my security question answer Apple ID and my recovery email address has since been deleted and disabled. How to get answers to security questions and or change my email recovery?

  I forgot my security question answer Apple ID and my recovery email address has since been deleted and disabled. How to get answers to security questions and or change my email recovery?

  Go to https://getsupport.apple.com . Click on "see all of the products and services ', then 'More', then 'Apple ID', then 'other Apple ID subjects' then 'security issues forgotten Apple ID". If you have problems with this test of this form: https://www.apple.com/emea/support/itunes/contact.html

• The active network connection icon keeps changing on me. He began by showing only 2 connections to the internet and the changes and then later to 3.

  Hi, the active network connection icon keeps changing on me.  He began by showing only 2 connections to the internet and the changes and then later to 3. But does not show where is this extra connection to connect to the local network.  I have a laptop so no wireless and cannot understand why he continues to display an additional connection.

  original title: network access connection

  Hello

  1. what version of Windows operating system do you use?

  Click on the link below.

  http://Windows.Microsoft.com/en-in/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  2 has there been any changes to your computer until the problem occurred?

  3. have you installed all types of network adapters on your computer?

  4. are you able to connect to the network and browse the Internet?

  I suggest you to follow the troubleshooting steps and check if the problem on your computer is resolved.

  Method:

  Check if the network adapter is displayed in the Device Manager.

  a. right click on computer or workstation.

  b. Select manage.

  c. click Device Manager on the left was next to the window.

  d. on the right side, locate the network adapters and click the arrow to expand the menu.

  If you have multiple NICs installed (watch), I suggest you uninstall the network adapters that is irrelevant to your computer by right-clicking on the adapter irrelevant and selecting Properties and then select uninstall.

  Please provide us with additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• I have all the games Age Of Empires, the versions of Windows and I changed to a Mac computers. How can I get the Mac version of the games and use my existing serial keys?

  I have all the games Age Of Empires, the versions of Windows and I changed to a Mac computers. How can I get the Mac version of the games and use my existing serial keys?

  Hello

  As you have bought Age of Empires for Windows OS, you will not be able to install the same copy of Age of Empire Windows version on Mac. However, you can contact the telephone support for confirmation on this issue.

  Here is the link:

  http://support.Microsoft.com/kb/295539

• How can I do a phase shift and amplitude change on wavefile which is read in

  Hello all

  I have a wavefile which has two channels, left and right, I would make a phase

  SHIFT and amplitude change on one of the channels.  Can I split each channel

  in the tables, but I don't know how to do a phase shift and amplitude change on the

  Table to get the new signal.

  TIA sal22

  Hi Sal,

  Here's a way to implement the phase change:

  

  In regards to the change of amplitude, you could just multiply all of the table with the desired value.