VSM - cannot add PS Series group

Similar Questions

• Cannot add users to groups

  Hello

  I can't add that a new contact for groups, the drag and drop no longer works.

  Do you know why and how I can fix it?

  Thanks for your help!

  Do you mean is "Contacts"?

  Make sure that the contact that you are trying to add is not already in this group. This is the situation where adding them is supposed to not work.

  Otherwise, I don't see what could be causing it.

• Contacts app - cannot add a group contact

  Contacts app needs a bit of love programmer.

  I am trying to create a new group of contacts (* no * a "Smart group").

  I created the (file-> new group) group.  Tried to created in the section of the sidebar and "on my Mac" iCloud Same behavior.

  I select "All Contacts" and enter a keyword to search for. If the contact is not in the Contacts, but is in the Mail, you * must * "Add to Contacts" entry allows you to drag the contact into a group.

  You * might * be able to do it once or twice, but soon the Contacts won't you allow to drag anything else in the new group you created.

  If you leave Contacts and re - open, you can add one or two people, and then it stops once to answer more trolling.

  All this experience?  Or a solution?

  Hi there, Mark Rushton!

  Contact groups can be quite practical, and I understand your message you are having a little trouble to create yours--you cannot drag contacts you want in the Group shortly after. I know it's important to be able to create these groups with all you need, and I have a few steps, we can try troubleshooting.

  1. Exit the Contacts App. Hold down the SHIFT key on your keyboard. While now Shift, re - open Contacts. Try to add to your group again.
  2. Restart your Mac. Click on the menu  Apple in the upper left of your screen, then select "Restart" in the menu dropdown. When the computer is back on, Contacts open and try to add to your group again.
  3. Test of a new user account. This will help determine if there is no data that could cause a conflict. Instructions on the configuration and test in a new user account can be found in the article from the link below.

     How to test a question in another account on your Mac.

  4. Try to create your group in Mode without failure. Use the following article to help get into Safe Mode. Even if the title is not specific to your question, it's still a big step to take. Safe mode runs checks on your system and prevent execution that might be the cause of some software conflicts.

     Try safe mode if your Mac does not end commissioning

  Have a great day!

• WNDAP360 / WMS5316 - cannot add AP since the firmware

  Hi we have just updated the firmware on our access points (WNDAP360) 2 and cannot add them in the WMS5316 (ProSafe 16ap)

  I tried to perform a reset, it locates the device, but the progress indicator just to 0% with the rotation of graphics. The Web page times out. Ive left it 40 minutes

  I also manually configured on the same subnet, unused IP and tried to add through discovery of intellectual property

  This seems to have happened since the updates of the firmware:

  WMS5316 is on 2.1.5

  WNDAP360 are on 3.0.4.0

  Beforehand, they were always capricious to add like its never been clear what password to use. For reference, Ive tried our internal password that the group is configured for blank password and password password for example.

  I tried adding with new IPs and also the IP existing / default

  Everything I try, I can't do these Aps to add to the group / management system. Here are the recent errors in the system log:

  7 Oct 09:50:10 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 182 seconds

  7 Oct 09:50:10 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:52:04 LEYWMS01 syslog.info - MARK-

  7 Oct 09:54:10 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 180 seconds

  7 Oct 09:54:10 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:56:04 LEYWMS01 user.err ap_mgr_WNDAP360: AP 10.2.100.171 changed the status of success<0> offline: unable to connect to the server<-3>

  7 Oct 09:56:04 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:57:07 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:58:10 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:58:10 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 180 seconds

  7 Oct 09:58:10 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:59:10 LEYWMS01 user.err ap_mgr_WNDAP360: AP 10.2.100.171 changed status connection: unable to connect to the server<-3> to success<0>

  7 Oct 10:02:12 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 182 seconds

  7 Oct 10:02:12 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 10:03:19 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 17 seconds

  7 Oct 10:05:17 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 19 seconds

  7 Oct 10:06:16 LEYWMS01 user.warn: WARNING: 192.168.0.100/images/product_logo.gif URL has had 184 seconds

  7 Oct 10:06:16 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 10:07:19 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 23 seconds

  7 Oct 10:08 LEYWMS01 user.info: access point [ip:192.168.0.100] [model: WNDAP360] added to list managed

  7 Oct 10:09:19 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 21 seconds

  7 Oct 10:10:19 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 183 seconds

  7 Oct 10:10:19 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 10:11:22 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 23 seconds

  7 Oct 10:12:04 LEYWMS01 syslog.info - MARK-

  7 Oct 10:13:21 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 21 seconds

  7 Oct 10:14:21 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 182 seconds

  7 Oct 10:14:21 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 10:15:20 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 21 seconds

  7 Oct 10:15:50 LEYWMS01 user.err ap_mgr_WNDAP360: can not deal with CPI since Timeout:Timeout has been reached<-4>

  7 Oct 10:17:21 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 22 seconds

  Now solved

  Had to manually assign an IP address in the same subnet (which had already been done), and then restart the WMS service, then try and add it again. Connection is established and the progress indicator has increased. Several times he has failed when even at 40%-60% and said the authentication has failed. However he did at least change the IP address to the new so something was working.

  I have left alone and returned to him and he said connected. It seems that the synch plant just constantly but ends by develops. Then I changed the password / group, it says failed again and finally himself developed.

  Garbage

• No 'add a contact' or 'add a contact group' capaibility more

  My icons 'add a contact' and 'add the contact group' have completely disappeared from my toolbar, and I can't even find them in the options to add.   It seems that these characteristics have completely disappeared... I search and cannot find it anywhere.  I'm not paying $45,00 support line and what is happening with that anyway...? I do pay for support for a product I purchased?  Ugh!

  Anyway, does anyone have any suggestions on how I can get help or find a way to add these features to my mail?

  Thank you! H

  My icons 'add a contact' and 'add the contact group' have completely disappeared from my toolbar, and I can't even find them in the options to add.   It seems that these characteristics have completely disappeared... I search and cannot find it anywhere.  I'm not paying $45,00 support line and what is happening with that anyway...? I do pay for support for a product I purchased?  Ugh!

  Anyway, does anyone have any suggestions on how I can get help or find a way to add these features to my mail?

  Thank you! H

  Open Windows Mail > toolbar at the top, click Contacts > on an open space on the inside of the right side, RIGHT click, click Customize this folder > what type of file you want, click on the pointer to the right until you see Contacts, click on it. > OK
  

  t-4-2

• get the 1726 error: cannot add the port monitor

  get the 1726 error: cannot add the port monitor hp discovery port monitor (hp photosmart 5525 series) running Windows XP, HP Photosmart 5525

  Could not complete the installation.

  Hi Jeff,

  The computer manufacturing must have created a partition on the disk or provided you CD to restore the computer to the way it was when you bought it. If you have a PC clone, then probably you need to reformat your hard drive and reinstall the operating system. If you have an OEM computer (example: HP, Dell, ETC) there is most likely instructions when you turn on/off press F11 or F12 to return the computer to the computer.

  Note: Do nothing until you have all of your backup data.

• Cannot add the new log file for the 11g database.

  Salvation of DBA
  
  I'm not able to add the log file, I receive the error message when the database is added.
  
  SQL > alter database add logfile group 3 ('/ oracle/DEV/db/apps_st/data/log03a.dbf','/oracle/DEV/db/apps_st/data/log03a.dbf') Re-use of size of 50 m;
  alter database add logfile group 3 ('/ oracle/DEV/db/apps_st/data/log03a.dbf','/oracle/DEV/db/apps_st/data/log03a.dbf') Re-use of 50 m of size
  *
  ERROR on line 1:
  ORA-01505: Error adding log files
  ORA-01577: cannot add the log file ' / oracle/DEV/db/apps_st/data/log03a.dbf'-fichier
  already a part of the database
  
  SQL > select a.group #, a.status, a member of the journal of v$ a, v$ logfile b where a.group # order of b.group = # 1;
  
  GROUP # MEMBER STATUS
  ---------- ---------------------------------------- ----------
  1 ACTIVE /oracle/DEV/db/apps_st/data/log01a.dbf
  1 ACTIVE /oracle/DEV/db/apps_st/data/log01b.dbf
  /Oracle/DEV/db/apps_st/data/log02a.dbf CURRENT 2
  /Oracle/DEV/db/apps_st/data/log02b.dbf CURRENT 2
  
  Kindly help me to add the new log file to my database.
  
  Thank you
  SG

  PGO

  Please see (how can redo log group be dropped when it ever becomes inactive?) [ID] 730827.1).

  Thank you
  Hussein

• Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  You have placed your beam to insert at the end of your text on page 13 and then apply Insert menu: Page Break? In the v5.6.2, Pages I just add a new page to a section of four pages to this approach.

• How to recover bookmarks - cannot add, restore files or import even after restarting the pc and remove reinstall Firefox?

  Bookmarks have disappeared. Cannot add new bookmarks, import from another browser, open the previous bookmarks file. I tried the solutions in Help and troubleshooting without success. CCleaner doesn't work anymore when it comes to Firefox. I've used this for years with the problem. Everything else seems to work.

  Problem solved by synchronizing with my cell phone. None of the solutions in "Help" has solved the problem. CCleaner now work again.

• Search bar does not work. Cannot add search engines.

  Search bar does not work. Cannot add search engines.

  
  

• Cannot add new bookmarks.

  I'm using Firefox 34.0.5 and recently discovered that I can not add new bookmarks. A keyboard < Ctrl > d does nothing. If I click on the star to make a bookmark, I see the animation of the star wheel above the bookmark icon and turns blue in the process. But after the animation is completed, the star is colorless and no bookmarks appear in the "do not sort" or any other bookmarks folder.

  I have Firefox "Reset" by the option "restart with modules disabled...". "menu of aid, but has not helped. I do not use any addons "bookmark".

  My PC is running Windows 7 Pro 64 bit. He has 32 GB of memory and a 256GB SSD as drive MBR (C).

  Is there a solution to my problem?

  Hello

  Try to see this help article:

  • Cannot add, change, or bookmark - how to fix

• Ask - Ios 9.2, but cannot add an attachment (pdf file already stored in icloud)

  Ask - Ios 9.2, but cannot add attachment in the yahoo email (pdf file already stored in icloud): drive to icloud and mail are already put in place, but don't see any files in the icloud drive (pdf in adobe already saved twice in icloud). Proof of icloud already stored is because my file name is renamed «...» (2)"in view of the repeated stops.

  Save it as a separate file - don't know if you'll be able to added a PDF by email

• Cannot add a network printer

  I have a problem with the printer! I have a network printer connected to my router via ethernet. I use the printer via wifi of two macbooks.

  I got an error 'printer not connected' and have already tried the following several times:

  • reset the router
  • restarted the printer
  • Reset my printing system
  • renamed the folder library/printers
  • reinstalled my driver of Canon software
  • fact a boot secured my MacBook, then a normal departure

  When I try to add the printer again (of course it was removed by rebooting) I don't see anything via Bonjour (in the default tab). The printer has a valid address (via DHCP) and I can ping to my macbook. I also tried to add the printer through the address IP (IPP) - it does not print.

  I get all printing stations I can find no joy... help please!

  OS X 10.11.3 • Canon MF8050 driver 10.6 • VDSL modem/router TRENDnet

  Peter

  This morning, I tried to add a printer, and - as the magic - my printer appears in the window by default. Quickly, I added, print a test page, and then other PDF via Preview. Awesome! Then I tried to print a poster with Acrobat Reader, and I'm back for the message "printer not connected" that marked the beginning of my problems a week ago. Again, I have reset the printing system, even reinstalled two versions (more recent and earlier) drivers. I can ping the printer, but cannot add via IP either.

  I searched more problems and solutions print, but in vain.

  Help, please!

• Satellite M100-180: keys Fn does not & cannot add Kubuntu

  WINDOWS XP HOME EDITION OPERATING SYSTEM
  ATI display driver
  1 FN Key: does not work...
  2.i cannot add cuz Kubuntu (Linux OS) Display Driver(which I update it) or cuz of the Bios (which I've updated)...
  What is the solutions here? Thank you

  Hello

  1 do you want to say as a unique key FN key is defective or you cannot use the FN + F1 - F12 key combinations?
  2. you're the first person to report on this subject. Are you trying to install Linux as a second OS or what?

• Cannot add cards: AMEX Canada blame Apple

  Hi, try to add my Amex card to pay Apple and he says repeatedly it cannot add the card now, try again later.  I called AMEX and they say that it's Apple's fault because all's fine their end.  I am connected to the Internet by Wi - Fi that works fine for everything else.

  At the beginning I was sent an authorization code, but thanks to my ISP email was taking too long to reach me so that the code didn't work.

  I have a feeling that this is why he does not accept the card now. even if this is my personal form of payment in iTunes.

  Is there a way to get the iPad Pro to go to this screen once more where I can request permission by e-mail?

  Hello

  Try the following steps:

  • Go to: settings > iCloud - at the bottom of the screen, disconnect.
  • Go to: settings > Touch ID & password - password turn off.
  • Reboot your iPad.
  • Reconnect to iCloud, turn on password and try to add your card again.

  When adding maps, follow the steps detailed here:

  Set up and use Apple pay on your iPhone or iPad - Apple Support