vSphere 5.5 hosts appear under "Hosts" in vCloud Director

Similar Questions

• Unable to prepare the host to Vcloud Director

  Hi all

  Hope you guys can help me. I try to install the track of vcloud Director version, and I got most of this work. The problem I have now is that I cannot prepare a host. I installing the server in a cluster, I have no shared but only storage using local disks (wondering if this isn't the problem). I added my vcenter server, which is a virtual machine on a host, but I'm still unable to activate the host for its use.

  I read somewhere on the forums that it must be in maintenance mode, but it does not work. In fact if I do this, the host gets a Red Cross in the available column. On the only host I get an error saying connection refused. The other, they say just can't prepare host.

  Any help would be welcome.

  KettieKop

  You need to meet the prerequisites first, specifically to have active DRS.  For the active DRS on the Cluster of hosts in vCenter, for the DRS, you need to have more than one ESX host AND the shared storage.

  Shared storage is a requirement for vMotion (as the DRS is on your virtual machines for load balancing)

  Several hosts is necessary to allow pools of resources (you need a place to load their balance)

  Once you meet the requirements, then you should be able to view the ESX host, when you try to prepare them for vCloud Director.

  Best regards

  Jon Hemming

• Can I run vSphere 4.1 hosts when you run a 2 vCenter 4.0 update server

  Can I run vSphere 4.1 hosts when you run a 2 vCenter 4.0 update server.

  The thing is that I don't have a 64 bit OS on my vCenter server and a new requirement was 64-bit DSN on the vCenter.

  So I want to install vSphere 4.1 on the hosts and vCenter 4.0 until a new server running is running.

  No, 4.1 hosts need a vCenter 4.1.

  See http://www.vmware.com/pdf/vsphere4/r40/vsp_compatibility_matrix.pdf

• Move the VM of ESXi 3.5 to Vsphere 4.0 (host chang & data store)

  I have a server ESXi 3.5 with 1.6 to with 20 VM local storage.

  Now, I want to continue to set up a cluster with a fiber channel storage. I want to know if this procedure is correct:

  Can I migrate the computer virtual host that esxi 3.5 for the new Vsphere 4.0 host connected to the SAN fiber channel?

  Are compatible vm ESXi3.5 to vspehere 4.0?

  once migrated all the VM I want format host ESXi 3.5, install Vsphere 4.0 and set the two servers in HA.

  ESXi 3.5 and 4.0 vsphere host must have the same processor?

  THANK YOU TOO MUCH.

  Hello

  You can move vms from 3,5 to 4, first of all, look at that if you move virtual machines in an othe data store, you must use svmotion or take off your virtual computer.

  You can run 3.5 vms in an esx 4 without problem. So if you want to enjoy the v4, you must first upgrade vmware tools, and the last step is to upgrade the virtual machine virtual material.

  Move all the VMS to the v4, and then reinstall the other server with esx4.

  Check the vmotion compatibility matrix and evc cluster parameters, you can mix processors intel, but not mix between amd and intel.

  hope find it you useful.

  concerning

  ____________________________

  ING. Diego Quintana

  SECURE CHANNEL-VAC-VTSP-VSP

  Wetcom group

  [http://feeds.feedburner.com/_{r/WetcomGroup /}6/1]

• vCloud Director 5.1 prepare host has no

  We have a cluster of vSphere 4 host mixed with ESXi 4.1 and 5.1 5.1.

  3 of the 4 hosts are prepared and working in a vCloud Director 5.1 provider VDC.

  Recently, I upgraded the left of ESXi 4.1 to 5.1. After the upgrade, I tried to prepare it for the vCloud Director Provider VDC. But run into an error:

  Failure occurred during the preparation of the host XXXXX

  -java.net.SocketTimeoutException: Read timed out

  -Reading has expired

  I tried following things:

  -Make sure there is no virtual machines running on the host. The host really going into Maintenance mode whenever I run the preparation.

  -Restart the ESXi host

  -Activate the firewall ESXi 80 443 httpClient

  -Run esxcli list of software vib | grep vcloud to check if the agent is already installed. But nothing showed up.

  All this made no difference. Installation always times out...

  Someone at - he seen this before?

  Ok! Now, the problem is fully resolved. Guess what the problem... The internal USB controller on the blade has been fixed in BIOS to USB 1.1! I changed it to USB 2.0 and everything works twice as fast and I was able to prepare the vCloud host successfully.

  Do not know why the BIOS setting has been changed just for this blade. Glade to have it well sorted.

• Iomega Portable hard drive now does not appear under "Devices" after accidentally deleted USB cable. USB

  My Iomega eGo Portable hard drive was connected by USB on my Macbook Pro OSX 10.9.5 cable and I was transferring my iPhoto folder.  Unfortunately, the cable dropped and I got a message on my laptop hard drive had not ejected correctly.   I reconnected it the cable, but now, it does not appear under devices in the search page.  I also checked the disc utilities and it isn't here either.  I tried to connect the hard drive of my iMac, but it does not appear in the devices out there either.

  Although I have been using a Mac since they first appeared on the market and can usually work things, I find it more and more difficult with all the new technology.  Everything that used to be so easy, one of the great things the Mac since MS-DOS.

  If anyone can help I would be very grateful, because I have a lot of files on this disc of old Mac and use the Iomega to backup my most important files.

  The drive may have failed.

  Try different USB cables.

  Remove the naked drive from the iOmega enclosure and test it in a known functional wardrobe.

  Ciao.

• Drive external hard drive does not appear under "devices."

  Hello

  I just updated my OS to Sierra of MacOS. I have connected my external hard drive (HDD) and it does not appear under "Devices" in my Finder window. It worked fine before the update.

  I use a MacBook Pro (end of 2013), currently running MacOS Sierra (Version 10.12). My external HARD drive is a SeaGate Slim SL Media (500 GB).

  The external HARD disk appears in disk utility application. He also appears on the about this Mac > system report > USB. I don't know what the problem is, the external HARD disk is identified but does not appear for use in the Finder window.

  I read that it could possibly be in mode 'sleep' and putting the MacBook to sleep (while it is plugged into the external HARD drive) and it to wake up again should solve the problem. However, it did not work. No more restarting my MacBook. It was mentioned in another post that it may require extra power, so I attached power adapter and again, without success.

  I do not want to clear the contents of the external HARD drive.

  Is there a way to get my external HARD drive works as expected with my MacBook?

  Thank you much in advance.

  I also have this problem.

  My camera is Macbook Pro 13 "retina 2015 and Seagate Backup more 1 TB (NTFS - Paragon NTFS)

  * Edit *.

  

  My HDD show in report system > hardware > USB

  but it does not show in Finder or Desktop.

• I want to change the name that appears under 'To' and the 'author '.

  I want to change the name that appears under 'To' and the 'author '.

  No matter what particular place, or simply everywhere where you happen to be at this time?

• I have installed Firefox 12 and went to install add-onns, I added 6 may add ons, none of them appear under 'Add-ons '.

  I installed Firefox 12, I then added 6 modules, when I check on them, I go to 'tools'-'Add-ons' and nothing found. Some appear under 'tools' (like tweaktube and delicious) but none appear in the list of modules.

  It is possible that there is a problem with the files that store the registry extensions.

  Delete the files (extensions.sqlite, extensions.ini, extensions.cache) extensions.* and compatibility.ini in the profile folder of Firefox to reset the extensions registry.

  • https://support.Mozilla.org/KB/profiles

  New files will be created if necessary.

  See "extension corrupted files:

  • http://KB.mozillazine.org/Unable_to_install_themes_or_extensions
  • https://support.Mozilla.org/KB/unable+to+install+add-ons

  If you see disabled extensions, is not compatible, in "tools > Modules > Extensions ' and then click the Tools button, on the left side of the search bar (or click on the"Find updates"button in older versions of Firefox) to check if there is an available update compatibility.

• How can I clear my card data that appears under the search categories cards?

  How can I remove card slots that appear under the search card categories? I have not saved favorites and I already deleted locations lately, but for some reason any previous locations appear under the different search category.

  Click on "Favorites" you show in your screen shot with zero places.

  Then, click "Recent" down to the Center.

  Then click on 'Clear' at the top left.

• in iMovie... Library of photos does not appear under libraries

  Library of photos does not appear under libraries in iMovie. Is there earlier this morning, then came back, no past once again. Apparently I can't connect to

  It is a problem that has been reported previously in iMovie 10.1.1. Photo library will be displayed intermittently when iMovie is launched. The only solution I know is to open the photos app before the launch of iMovie. That has always worked for me. It seems that if Photos is opened and closed even before iMovie will appear. Once it appears, it will remain as long as iMovie is open. I hope it works for you.

• None of my extensions will update and do not appear under Tools. What's wrong?

  I use Windows 7 and the latest version of Firefox 3.6. None of my extensions will update and do not appear under Tools. I use Firefox for years without any problem. How can I access my extensions and how to update?

  Remove files (extensions.rdf, extensions.cache, extensions.ini) extensions.* and compatibility.ini in the Firefox profile folder to reset the extensions registry.
  
  See "extension corrupted files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
  
  If you see disabled extensions are not compatible on the next departure in "tools > Modules > Extensions" and then click "Find updates" to do a compatibility check.

• My iphone 5s is not appear under devices when I sign in my Apple account online.

  When I connect to my Apple account online using my Apple ID and password, no devices are appearing under "Devices used to connect to this account." How can I get my 5s iPhone and my Ipad Mini will appear?  Currently I have backup my iPhone using iCloud. This device should not be listed?

  Are you certain that your ID for the backup to iCloud and ID you accessed above are one and the same? (some people have multiple IDS).  Are your 5s and Mini signed in the iTunes and the App Store using the above ID?

  If you only use a single ID, see the article below:

  Check the list of devices in your Apple ID to see where you are connected - Apple Support

  He suggests that, if you do not see your devices, you may have security questions that you does not meet?

• Why my TestStand deployment installation appear under my Windows will not start menu of my target machine?

  Why my TestStand deployment installation appear under my Windows will not start menu of my target machine?

  I managed to install the deployments of work to the target machines. However, I expected to see the classified facility "My TestStand system" in my Start menu, but it is not. Am I misunderstanding something here?

  Also, if I do another target second deployment to the station as "My TestStand system B", all LabVIEW files in my previous installation for "My system TestStand" disappear from the directory (c:\Program Files\My TestStand system) target.

  I use TestStand Professional 4.2.1 on Windows XP and LabVIEW 2009 development station.

  Thank you Paul,.

  That solved my second problem and inspired me to look deeper for the response to my first problem. The answer lies in the tab 'distributed file","Installer properties' box 'create a program item:

  

  Wouldn't be nice if it is automatically checked by default for main sequence files? Wouldn't also nice if "Upgrade Code" was regenerated automatically by default whenever we have saved the file *.tsd under another name?

  Thanks again,

  Eugene

• Printer does not immediately appear under device & printers on Windows Server 2012 R2 VM. Printers appears after 15-20 min or more.

  Hi team,

  I have a question where adding a network printer is successful. I can see the printer in the Device Manager and I can print as well. However, it does not immediately appear under devices and printers and takes a long time to appear. Can someone help me please as soon as possible?

  Thank you

  Anand N V

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it