Unable to prepare the host to Vcloud Director

Similar Questions

• I am unable to stop the hosts of loading process, because it takes a lot of memory

  I am unable to stop the hosts of loading process, because it takes a lot of memory

  Hello

  Some processes have to load, however, you can use these tools to check those and look for ones that
  can use a lot of memory after loading in the Manager of tasks - processes tab - CTRL + SHIFT + ESC
  Check the CPU column.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• vCloud Director 5.5.1 can prepare the host

  Hello!
  My environment: vCloud Director 5.5.1.1654672

  ESXi 5.1.0 1065491

  vCenter 5.5.0 1623101

  
  I want to prepare a new host in our vCloud cluster, but I only had errors:

  "host cannot be prepaired":

  com.vmware.ssdc.util.LMException: com.vmware.ssdc.library.vim.SvcConnectionException:

  com.vmware.ssdc.util.LMException: com.vmware.ssdc.library.vim.SvcConnectionException:

  com.vmware.ssdc.library.vim.SvcConnectionException:

  com.vmware.ssdc.library.vim.SvcConnectionException

  all with the error "unable to connect to vcenter Server.

  org.apache.http.conn.HttpHostConnectException: connection to https://vcloudserver refused

  -Connection to https://vcloudserver refused

  -Connection has expired

  I checked the dns resolution (all directions, network connectivity (ping, telnet,...), vshield status etc...)

  I found the Thread problem preparing hosts , but is not a solution for me.

  Anyone have any idea?

  THX

  BR

  I solved my problem - it was a firewall issue.

  vCloud Director coud not connect to the esxi host because ports were blocked.

• vCloud Director 5.1 prepare the hosts with a busy workload

  Hi, we have 3 hosts in a cluster of vSphere with vCenter 5.1 4. I'm planing to install the agent on the three hosts vCloud.

  My problem is there is now tons of virtual machines running on these 3 guests. If I followed the provider VDC Setup Wizard and simply add the credentials to root for these 3 hosts, it causes any failure to virtual machines running on the host? She will force guests to go into Maintenance Mode and cause the failure? Or vCloud will simply report failure because there are virtual machines running on these hosts?

  If vCloud will just report failures, I guess that I will then have the opportunity to prepare each host individually, which allows me to move a load of work to rest 2 hosts?

  Here's what I did: I followed the wizard configuration provider VDC and when reach the host preparation stage I put in the wrong password for guests. The preparation of the host has not of course. I then have the options to prepare each host. I think that I was just more careful here. Stage of preparation to host should stop if there is direct VM on the host.

• vSphere 5.5 hosts appear under "Hosts" in vCloud Director

  Hi guys.

  I had a problem with my cell of vCloud Director and re-installed completely.

  On the vCD fresh installation I have no problem adding vCenter 5.5 but no host show at all.

  I tried to remove and re - install agents on host computers, vCD reset my vCenter inventory 5.5 database, restart the hosts, but nothing is.

  Any thoughts on this topic?

  Thank you

  Campellos

  Attach a vCenter is not enough, you must create a provider vDC then.  It is the association of a cluster for the vCloud instance.  Once this is done, guests who are part of the cluster should appear in the list of guests to prepare.

  Clusters must be active DRS.  Do not disable DRS on a cluster, it is attached to vCloud Director.

• Move the VM from: vCloud director to vCenter

  How to move a virtual machine from: vcloud director to the vcenter even integrated into vcloud Director?

  If VCD has no more need of this virtual machine, you can perform steps below.

  1 unregister the virtual of VC machine

  2 remove the machine virtual de VCD

  3. save the VM in VC

  SCR would be an additional tool that would be useful for moving loads of work, but a lot depends on number of cases of use of involved and of the virtual computer.

• Send ISO file to the catalog in vCloud Director?

  Hello

  I am trying to download an iso file on my catalog, but unfortunately I have error: unable to connect to the host on port 443 x.x.x.x

  Is it possible to send iso (on request)?

  Kind regards

  Piotr

  Piotr Hi, yes it is certainly possible.

  You by all means try to do it in a situation where you need to go through a Proxy (perhaps with authentication)?

  I noticed that sometimes the soft transfer Java have problems when it is not a right network connection. You are able to check without going through a proxy?

  Thank you.

• Where can I find the package libXdmcp vCloud Director 5.1 RPM installation?

  Hi all

  I have installed my first vCloud Director and am not a Linux
  Guy at all. In any case my RedHat 6 operating system does not include the RPM libXdmcp
  package. I downloaded and installed several RPM packages on the web,
  but none of them does not seem to fix the problem. vCloud Director always told me
  the package is not installed. I think that am downloading and incorrect installation
  RPM. Can someone please point me to a URL where I can download the right file?
  I went to many Web pages with hundreds of links to libXdmcp
  downloads, but I don't know which one to choose from. Also if you can tell me the
  good way to install this would be great!

  Thank you in advance for your help!

  He should be the one below, it's him I used all my environments and is the one in the post to blog as well.

  
  

  libXdmcp - 1.1.1 - 3.el6.x86_64.rpm

• Unable to save the host file on Windows 7 error that access is denied.

  Original title: cannot save the hosts file

  Windows 7: I want to add the new ip address for the server on the host, while adding its allowing me to save despite the UAC is lower and I am the administrator of the machine. I've run Notepad as administrator and navigate through the host file edit but during the recording of overwriting file access is denied. How can I get around that?
  64-bit Windows 7

  Hello
   
   
  Method 1:
  Try saving the file in safe mode with network.
  Reference:
  Start your computer in safe mode:
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  
  Method 2: Temporarily disable the antivirus software and see if that helps.
  Reference:
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Unable to choose the host when you deploy a virtual machine template

  Good Morning-

  I feel that the answer to this is with myself; However, I would ask - I try to deploy a virtual machine model for test purposes and I want the virtual machine must be created on a specific host.  When I start the Wizard "deploy the virtual machine of model", I am only able to select the cluster and not a specific host.   Is it possible for me to be able to select the host to which the virtual machine will be deployed without disabling DRS?

  Thank you very much in advance for the help.

  Steve

  What happens if you right click on the host that you want to deploy on the virtual machine to and select deploy from model - but don't forget if you have a DRS activated with anything other that Manuel DRS will select the host on which the virtual machine starts on and it would not be that you deply to--

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Unable to connect the host server alone on the bridge or a NAT server network

  I have configuered 5 comments OS (windows server 2003) on Vmware workstation (on a single host). Among them three servers are on the network host and two others respectively is on the bridge network and NAT. All the guest OS is on a local network (i.e. team).

  I can connect on the bridge or a NAT server to the internet. But I can't ping on the server (on the bridge or NAT) servers (on the single host network). IP address assigned to the host only network is the subnet of class A. And on the bridge or a NAT server is dynamically assigned by the DHCP service.

  Can someone help me?

  whether you are able to connect all the virtual machines, you have 2 options:

  -connect all your virtual machines on the host network

  -If you really need to keep your 2 VMs on the bridge and NAT, you must assign the 2 network cards to those virtual machines. One of the cards connected in Bridged/NAT and the other network card NETWORK connected to host only.

  concerning

  Jose

• Error 25011. Unable to configure the host Agent Service, and then if I try to start, shortcut missing serverui.url

  Hello

  I tried to get VMWare Server 2 to settle, (Windows Vista Business, SP1, Internet Information Services running, SQL Server 2005, 2008...

  and everything I try, I get error 25011. Cannot configure the host Agent Service.

  (The old Console server ran very well, only a few months ago, I can not connect with it to remote machines)

  Any suggestions would be welcome!

  Thank you

  Janos

  Hello

  Try:

  1 uninstall WMServer (you can clean the reg file)

  2. stop the IIS services

  3. install VMServer

  4. start IIS if you need it.

  J.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Unable to virtualize the host esx Server quadcore AMD Barcelona B3

  I have a server with AMD Quad Core CPU Barcelona B3 32 GB of RAM. I installed ESX 4.0 update1 on it successfully. After that, I try to virtualize esx server on this server. I added the new virtual machine with a standard configuration. When I try to boot the cdrom ESX4.0 I get the error message shown in the attachment.

  I tried with esx 3.5 and 4. Same mistake.

  cpuinfo on the esx host recognizes that UC is B3.

  I would be grateful no work around for this work.

  Thanks in advance

  It seems that your host is in an EVC cluster configured for Opterons third generation.  VCA usurps the guest not to not CPUID settings for a 'lowest common denominator' CPU, which is, unfortunately, a B2.  Try to remove the EVC cluster host.

• Unable to connect the host to the OpenVPN server in VM

  Hi VMware wizards!

  I have a problem with an installation of OpenVPN that fact in my head.

  Basically I have an ESXi with a Windows 2003 VM host. In the virtual Win2k3 machine I use OpenVPN.

  I can connect fine VPN and access windows can host one (the VPN server) and the router and other hosts on the local network.

  However, I can not connect with the VMIC ESXi host, no matter what I do. I can't ping, nothing.

  It's as if the ESXi host will not a package through the virtual switch to another subnet to connect to the management subnet.

  The main network is 10.51.35.0/24 and the VPN network is 10.51.36.0/24. The router has a route static send 10.51.36.0 to 10.51.36.1, which is the VPN interface on the Windows 2003 server which belongs to OpenVPN. The ESXi host has a default route to the router, and I can ping Internet from the service console.

  Still, all services on the LAN work as I expect of VPN, but I can't use the VMIC to connect to the ESXi host.

  Attached is a basic network design showing the configuration. It's pretty simple. I think it's a problem with the vSwitch or ESXi host somehow network config, but I am at a lost to troubleshoot any further... I can not ping the IP address of the VPN client from the service of ESXi console. Whatever it either to the service console simply refuses to go through the VPN, hosted by the virtual Windows machine.

  Ideas? TIA!

  > I install Ubuntu to host the OpenVPN instead of using Windows.

  Best solution. Ubuntu, it is also supported in ESX and you will have more control of it

  André

• Cannot prepare ESXi hosts

  Hey all,.

  I get the error attached when trying to prepare my two 5 ESXi hosts to vCloud Director. I did some research on Google and lead only I found that it was possible the prereqs for DRS were dissatisfied, be they (DRS is enabled on both) in my environment. I went to the hosts and has attempted to examine the agent logs, but they aren't there, so it seems that this process does not quite right from the start. Any suggestions?

  This command on its own, must return an output XML of VIBs installed on the ESX host.  It is somehow a post-dated check to see if the agent is already there.

  If you are in Mode of Support SSH/Local Tech, the output should start something like this:

  # > pwd

  / usr/lib/vmware /.

  #>. / esxcli-software vib.list

   
     
       

  .....

  If the command does not work then you will not be able to prepare a host.

  Are these images of ESXi embedded by chance?  My lab Kit is ESXi Installable on some HP blades.

  If these are incorporated, see if there is an update of flash card and that your partition zero is set on a persistent location:

  http://KB.VMware.com/kb/1033696

  Hope it gets you going to... worst case is to recreate the ESXi host for an installation on a single host CD to see if it clears up the problems.

  Best regards

  Jon Hemming