VSphere client 5.1 found an error message.

Similar Questions

• I turned on my computer and found this error message, windows does not start because the following file is missing or corrupt, config sys files

  I turned on the computer and this error message was the first thing I saw, and I had to spend the next half-hour reinstall windows xp. I want to know why I had to do and what can I do if this does not happen?

  Hi Lady of shadows,

  ·         What is Windows now reinstalled and perfect work?

  If so, you can see the following article for future reference.

  How do I recover from a corrupted registry that prevents Windows XP startup

• After vSphere client upgraded to 4.1 error received on host ESXi 3.5.0

  Hi all

  I have two hosts:

  (a) Dell PowerEdge 2950 (8 cores x 2 659 GHz + 24 GB RAM) accommodation "ESXi 3.5.0 184236.

  (b) Dell PowerEdge R710 (8 cores x 2 393 GHz + 12 GB RAM) accommodation "ESXi 348481 4.1.0.

  from the first connection using vSphere client to the new host of 4.1, I get a lot of customer ClassFactory Exceptions try to change computers invited on the 3.5.0 ESXi host

  Maybe:

  1. the new customer is not totally compatible with old ESXi 3.5.0?

  2. I have to restart the management interface of the ESXi 3.5.0?

  3. anything else?

  Another question:

  3 if I restart httpd on the ESXi 3.5.0 host or interface management service computers invited will be affected by the activities of reboot?

  Thanks in advance

  (1) Yes, it is not compatible, you can still use the former client vi3

  (2) are not

  (3) restart the management agent will not affect the virtual machine

• Extend the data via vSphere Client store - error ' call 'HostDatastoreSystem.QueryVmfsDatastoreExtendOptions' object 'ha-datastore System' on ESXi 'IP' failed '.

  Hi @all,

  I want to thank my datastore on my 5.1 esxi.

  When you extend the data store on the vSphere Client Console, I get the error message:

  German: Call von 'HostDatastoreSystem.QueryVmfsDatastoreExtendOptions' as Objekt "ha-datastoresystem" auf fehlgeschlagen ESXi 'IP' ist.

  English: Call 'HostDatastoreSystem.QueryVmfsDatastoreExtendOptions' to object "ha-store system data" in ESXi 'IP' failed

  Anyone an idea why I can't extend the data store? The new drive is correctly detected.

  Best regards

  Andreas Acker

  Hello

  This seems to be a local data store. ? This is where the ESXi host is installed. ?

  Thank you
  Avinash

• vim.fault.HttpFault during the sorting of virtual machines in vSphere Client after update 5.1

  Hello. I recently completed an upgrade to vCenter 5.0 > 5.1. I came across some problems common to the teeth with SSO, but things look ok at the moment. I have a problem I would really in trouble - when you try to sort virtual machines in the vSphere client, I see the following error message:

  Impossible to connect to the web service to run the query. Check that the service 'VMware VirtualCenter Management Webservices' works https://vcenter_server_fqdn: 10443 vim.fault.HttpFault

  It is reproducible on multiple systems running the VI client. The Viclient log shows:

  [viclient:SoapTran:P:43] 10:25:30.193 07-01-2013 invoke 4283 finishing on SessionManager:SessionManager [vcenter_server_fqdn] AcquireSessionTicket - series: 0.000, server: 001.425 [ERROR]

  Vmomi.Fault.SystemError: vim.fault.HttpFault

  to VirtualInfrastructure.ManagedObject.InvokeMethod (MethodName, Object [])

  at Vmomi.SessionManager.AcquireSessionTicket (String)

  at VmomiSupport.Services.AuthenticationTicketSource.Next)

  at VMware.VimServices.Query.Impl.LoginByTicketQueryCommand.CreateWebQuery)

  at VMware.VimServices.Query.Impl.WebCommandBase.Execute)

  at VMware.VimServices.Query.QueryServiceBase.Login)

  at VMware.VimServices.Query.Impl.QueryCommandBase.PreProcess)

  at VMware.VimServices.Query.Impl.WebCommandBase.Execute)

  at VMware.VimServices.Query.QueryServiceImpl.ExecuteQuery (QueryWebCommand)

  at VMware.VimServices.Query.QueryServiceImpl.Query (String, Int32, LanguageId)

  at VMware.VimServices.Search.Impl.Utils.NewResults (ResultsInternal)

  to VMware.VimServices.Search.ResultsImpl.RetrievePage (Nullable'1)

  to VMware.VimServices.Search.FilterOrderObjectSetProviderImpl'1.GetObjectSet)

  to VirtualInfrastructure.ObjectSetPoller'1.DoPoll)

  to VirtualInfrastructure.ObjectSetPoller'1. < survey > b__2 (Object)

  ...

  at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback (Object)

  [viclient:SoapMsg: P:43] 07-01-2013 10:25:30.193 Vmomi.SessionManager.AcquireSessionTicket of application of RMI - 4283

  " <: containing soap envelope = ' http://www.w3.org/2001/XMLSchema "" xmlns: xsi = " " http://www.w3.org/2001/XMLSchema-instance "xmlns:soap =" " http://schemas.xmlsoap.org/SOAP/envelope/ ">

  < soap: Header >

  < operationID > 4C83B7E2-000010BB < / operationID >

  < / soap: Header >

  < soap: Body >

  < AcquireSessionTicket xmlns = "urn: internalvim25" >

  < _This xsi: type = "ManagedObjectReference" type = "SessionManager" serverGuid = "3089D6D0-307C-4B0D-8BD8-94606298C034" > SessionManager < / _this >

  < serviceKey > 1b27d894-3e47-4431-9d7b-c8cb2fd457aa / VIMWEBSVC < / serviceKey >

  < / AcquireSessionTicket >

  < / soap: Body >

  < / envelope soap: >

  Invocation of method error Vmomi.SessionManager.AcquireSessionTicket - 4283

  Message: vim.fault.HttpFault

  XML server:

  " < = xmlns:soapenc soapenv:Envelope ' http://schemas.xmlsoap.org/SOAP/encoding/ "xmlns:soapenv =" " http://schemas.xmlsoap.org/SOAP/envelope/ "container =" " http://www.w3.org/2001/XMLSchema "" xmlns: xsi = " " http://www.w3.org/2001/XMLSchema-instance ">

  < soapenv:Body >

  < soapenv:Fault >

  ServerFaultCode < faultcode > < / faultcode >

  vim.fault.HttpFault < faultstring > < / faultstring >

  < detail >

  < HttpFaultFault xmlns = "urn: internalvim25" xsi: type = 'SystemError' >

  < reason > invalid problem < / reason >

  < / HttpFaultFault >

  < / details >

  < / soapenv:Fault >

  < / soapenv:Body >

  < / soapenv:Envelope >

  [viclient:Error: P:43] 07-01-2013 10:25:30.193 RMI error Vmomi.SessionManager.AcquireSessionTicket - 4283

  < type = "Vmomi.Fault.SystemError error" >

  < message > vim.fault.HttpFault < / Message >

  vim.fault.HttpFault < DetailedMessage >

  < / DetailedMessage >

  lack of < reason > disabled < / reason >

  < / error >

  [viclient:Error: M: 4] 01-07-2013 10:25:30.193 System.Exception: unable to connect to web services to run the query.

  Verify that the 'VMware VirtualCenter Management Web services' service is running on https:// vcenter_server_fqdn: 10443

  to VMware.VimServices.Search.FilterOrderObjectSetProviderImpl'1.GetObjectSet)

  to VirtualInfrastructure.ObjectSetPoller'1.DoPoll)

  Vmomi.Fault.SystemError: vim.fault.HttpFault

  to VirtualInfrastructure.Soap.SoapServiceWrapper.DoInvokeSync (ManagedObject mo, MethodName, methodName, Object [] parameters, Int32 timeoutSecs)

  to VirtualInfrastructure.Soap.SoapTransport.VirtualInfrastructure.Transport.InvokeMethod (pars ManagedObject mo, MethodName, methodName, object [])

  to VirtualInfrastructure.ManagedObject.InvokeMethod (MethodName, methodName, Object [] leave)

  at Vmomi.SessionManager.AcquireSessionTicket (String serviceKey)

  at VmomiSupport.Services.AuthenticationTicketSource.Next)

  at VMware.VimServices.Query.Impl.LoginByTicketQueryCommand.CreateWebQuery)

  -End of the exception stack trace internal-

  [: Sink: M: 4] 01-07-2013 10:25:30.240 error: unable to connect to web services to run the query.

  Verify that the 'VMware VirtualCenter Management Web services' service is running on https:// vcenter_server_fqdn: 10443

  vim.fault.HttpFault

  Stack trace:

  at VirtualInfrastructure.Utils.Log.Trace (String, String, traceCategory)

  at VpxClientCommon.Util.Dialogs.Trace (String, String, String, traceCategory)

  to VpxClientCommon.Util.Dialogs.ShowError (IWin32Window, String, String)

  at VpxClientCommon.ListViewData.OnDisplayMessage)

  at VMware.CustomControls.ListViewEx.DoDisplayMessage)

  at VMware.CustomControls.ListViewEx.WndProc(Message&)

  ...

  at System.Windows.Forms.Application.Run)

  Any ideas/suggestions would be welcome

  My apologies for not updating this post - I completely forgot

  I ended up spending a call with VMware and the resolution in my case was to add my user account in domain directly to the vCenter administrator group - before I had been a member of a group of ESX-Admins who was a member of the Administrators group. I hope this helps...

• Users of Active Directory cannot connect to vCenter 5 device via vSphere Client

  I'm unable to use credentials to access AD unit vCenter 5 via the vSphere client. I get an error message that I can log in because of 'incorrect user or password name' I am able to connect with this AD username and password for my vCenter 4.1, and environment to my RDP hosts by using the credentials of the AD, if AD works very well. And the password that I entered is correct.

  I could connect with AD credentials two weeks ago. Two weeks ago I stopped being able to connect with the credentials of the AD. I dropped back to the use of the local access through the vSphere client root user login. It seems that two weeks ago, my Oracle user passwords has expired. I fixed that by connecting to the EM console and responding to the command prompt to change the passwords. I've "changed" them to return the same password. Then, I subsequently put the limit password_life_time unlimited in the default profile. I tested since the vCSA admin interface the database settings. The settings saved and restarted the service VPXD.

  I have a 5.0.0 - 455964 vCenter device connected to an Oracle database. I activated the AD authentication in vCenter web admin GUI. I restarted vCenter Server Appliance after you have enabled this feature. I have validated that the time on the device of vCenter and the Active Directory zone are less than one second on the other. DNS forward and reverse unit number of AD and self-esteem are good. DNS is hosted on the AD controller, so I have connectivity between vCenter and AD. I run the query domainjoin-cli command and output is correct. I checked from the vSphere that my AD user customer and the ad group each received the Administrator role for the vCenter in the permissions screen object.

  Any ideas where to look next?

  Paul

  Hello

  (1) log the vCenter Server Appliance as root.

  2) reset the number of connection attempts that have failed for the domain user assigned with the command:

  / sbin/pam_tally - reset user user@domain--

  (3) to determine the status of each user, run the following script:

  to CONNECT to ' / opt/same/bin/lw-enum-users | grep name | AWK {' print $2' '}'
  do
  DOMAIN = $(écho $LOGIN | cut-d ' \'-f1)
  USER = $(écho $LOGIN | cut-d ' \'-f2)
  / sbin/pam_tally - user $USER@$DOMAIN
  fact

• I found in my logs event before I even had my PC delivered they had a problem installing Windows 7 Premium 64-bit, and this error message is listed under Windows-Setup: 0xC000000D

  I have nothing else problems with my new system had in the past 2 months and have done two factory restores.  I get the "your video driver has failed but recovered" several times a day, it progresses freezing and, sometimes, the old bue screen.  I worked with the manufacturer and they took all original event logs before we did the restoration of 1.  After a Microsoft Update, it was even worse that I did a second on 10/18.  You went out with an update again and things seem to be OK until yesterday when it started happening again and again.  So I went in the event logs to see what they said and I found the error message a week before the system arrived even at my doorstep.  It seems whenever I did a factory restore it just keeps reloading the same problem!  Since they send you the REAL DISKS any more there is no way own things off and really repair the enrire thing - if it's still possible for an average user.  Other information: Journal name Microsoft Windows Kernel-EventTracing/Admin Source connected to kernel-EventTracing 2010-08-06 19:53:04 Evnet 3 category of task ID: Session-level: error keywords: Session OpCode: stop

  There are several other error messages that appear on a regular basis, not to mention the display driver one - that is the most obvious to me.  I saved the newspaper while they cannot get lost.  You can see that this same error message when I did the last factory restore on 10/18 is still original and mistakes so I could look at just to be reinstalled again.  My question is what is it, can it be repaired or do you need to strip ALL of this machine?  And while you will never say so, shouldn't they have taken this BEFORE they sent this computer to a client?

  Check with your PC vendor to determine if updated video drivers are available.
  Download and install if necessary. The video drivers are often buggy when
  originally published, so what you see is not unusual. I hope it's a
  minor issue if you had not seen the papers you would have noticed.
   
  "PC Nana" wrote in message news: c8aef944-7d5d-4888-8be5-839e71166366...
  > I had any other problems with my new system over the last 2 months
  > and have done two factory restores. I get the "your video driver has.
  "> failed, but recovered" several times a day, it progresses to the gel and
  > sometimes the old screen bue. I worked with the manufacturer and
  > they took all the original event logs before we did the 1st
  > Restore. After a Microsoft Update, it got even worse then I did a second
  > 10/18. You went out with an update again and things seem to be OK
  > until yesterday when it started to happen again and again. So I went in
  > the event set myself to see what they said and I got the error message
  > a week before the system arrived even at my doorstep. It seems
  > whenever I did a factory restore is just keeps the same reload
  > problem! Since they send you the REAL DISKS any more there is no way
  > own offshore things and really repair the enrire thing - if that's even
  > possible from an average user. Other information: name of the journal
  > Microsoft-Windows-Kernel-EventTracing/Admin Source Kernel - EventTracing
  > Connected on 06/08/2010 19:53:04 Evnet 3 category of task ID: Session level:
  > Error keywords: Session OpCode: stop
  >
  > There are several other error messages that appear on a regular basis
  > Also the display one - driver is it more obvious to me. I have
  > saving the newspaper while they cannot get lost. You can see that
  > when I did the last factory restore on 10/18 this same error message is
  > here and still the original errors so I could just look in
  > reinstalled again. My question is what is it, can it be repaired or do
  > you must strip EVERYTHING of this machine? And while you'll never
  > say so much, shouldn't they have taken this BEFORE they sent this computer
  > to a customer?
  >
   
   

• vSphere client install error J# 4113

  I installed on a server vSphere and visited by his IP address in my browser. He gave me a link to download the vSphere client. However, when I try to install this client I get the following error:

  -

  ---

  VMware vSphere Client 4.0

  -

  ---

  The Microsoft Visual J# 2.0 Second Edition installer returned the error '4113' code.

  -

  ---

  Ok

  -

  ---

  If I extract the installer with WinRar, it says:

  -

  ---

  VMware vSphere Client 4.0

  -

  ---

  Error 25070.Setup has detected that the Microsoft

  Prerequisite of Visual J# 2.0 second edition is not

  installed on this system. Please install this prerequisite

  and try again.

  -

  ---

  Ok

  -

  ---

  I am running Windows Vista x 64, which comes with .net 2.0 and 3 and I also have Visual Studio 2005 installed on the computer, so I don't know why he tries to install this in the first place, and still less why it's a failure.

  I got it, all you have to do is to uninstall the existing Microsoft Visual J# via the control panel.

  Once uninstalled rerun vSphere install and it ends without error.

• Cannot connect directly to Esx via the vSphere Client.

  Hello

  I can not connect directly to ESX through the le VSphere client. I have the following message:

  "Can not connect to "xxx"vSphere Client. Un unknown connection error has occurred. (

  The customer not able to send a complete application on the server. (Underlying connection was closed. An unexpected error has occurred when sending.)). »

  
  

  Le ESX reply to ping et name resolution are correct. They are seen by the vCenter and sshh connection to ESX is possible.

  
  

  Version: Esxi, 5.5.0, 1892794

  VSphere Client 5.5.0, 1880841 on Windows XP SP3
  

  
  

  Thank you for your help

  Have a look here: vSphere Client 5.5 and WindowsXP/Windows2003 & #8211; Unknown connection error & laquo; Mike Landry & #8230;

• Cannot download vSphere Client after patch installed

  I installed the latest patches for my two ESXi v4.1 servers using the vSphere Host Update Utility. the servers are now build 1363503.  In a web browser, when I go to the home page of each server to download vSphere Client, I get the following error: error HTTP 404 not found.  The link points to:

  http://vsphereclient.VMware.com/vsphereclient/1/2/9/8/9/7/7/VMware-viclient-All-4.1.0-1298977.exe

  What should I do to be able to download the latest vSphere Client for ESXi v4.1?

  It should be fixed soon. I think not many people noticed cela and use the former clients to connect to ESX.

  Concerning

  Girish

• Impossible to connect to vCenter Server 5.5 using the vSphere Client

  Hello

  
  

  I'm trying to configure VMware Lab home using the link below and I have reached a stage where I need to connect to vCenter Server using the vSphere client.

  
  http://boerlowie.WordPress.com/2011/12/13/building-the-ultimate-vSphere-lab-part-9-ESXi/

  
  

  I installed the package of 5.5 full vCenter server using the simple installation option and it includes vCenter server, single sign - on, Webclient vSphere, vCenter server and vCenter Server inventory service. All the the latter is installed on a virtual machine that is running Windows server 2008 R2 guest OS.

  
  

  Whenever I try to open a session on the vCenter Server uses the vSphere client, one of the following error is displayed.

  
  

  1. you do not have the permissions to connect to the server 'vCenter server IP address.

  2. cannot complete the connection incorrect username or password-, this error is visible when I do not specify domain\username domain user name and simply enter the user name.

  
  

  For the details of the error, please see the screenshots - vSphere_client_1, vSphere_client_2 and vSphere_client_3.

  
  

  As suggested in the link below, I tried to create an SPN and then set the SPN (Principal of Service name) and the UPN (User Principal name) in the Active Directory identity Source using the web of vSphere client (please see screenshot vSphere_Webclient_2)

  
  

  http://vinfrastructure.it/2014/01/issue-in-logging-into-vCenter-server-using-Windows-ad-credentials/

  
  

  To fix the permission error, I tried to add the domain user to the Administrators group on the server vCenter (see screenshot vSphere_Webclient_1).

  
  

  However, none of the above-mentioned resolution has worked.

  
  

  So can someone please help? I am stuck because of this problem and badly need help to move forward.

  
  

  Thank you

  AJMAL
  

  Able to connect to the vSphere Client do you use the [email protected] account?

  Have you already set up permissions on the server vCenter object?

  André

• VSphere client, cannot connect to Vmachine on ESXi5

  Hello

  I hope someone can helpme or guide me on this one.

  I already create two VMs on ESXi5 and their spouse on my domain, I can controlit from the console on esxi (via vsphere client)

  but... If I try to connect directly to the vmachine of my office via vsphere client I had a conection error

  I try with my domain user and the password

  I try with the checkbox "use the same windows credentials" and still the same...

  I thought maybe I give permmits to the vmachine directly from Esxi5, but I noticed that does not show in my area and I can't add my name of user or groups. I wonder if theres some how to join my esxi5 welcome to my domain and then can show my domain name such as an option to choose some users of group or individual userid

  (see attached)

  Thank you and have a nice day of departure (sound almost 07:00)

  Sawyer_MX wrote:

  I thought maybe I give permmits to the vmachine directly from Esxi5, but I noticed that does not show in my area and I can't add my name of user or groups.   I wonder if theres some how to join my esxi5 welcome to my domain and then can show my domain name such as an option to choose some users of group or individual userid

  You can join your ESXi your unter AD-> authentication services configuration.

  But that can only be allows you to assign permissions to allow users to connect to your server ESXi with the vSphere Client and do things over there, like create virtual machines or use its console your AD.

  To access the operating system inside the virtual machine remotely, use RDP, VNC, XDMCP, etc as a.p. said

  Concerning

• Once again... "" "scratch disks is write protected...". ' error message? -Mac

  Recently I found this error message appear again, different from that of a previous post. "The"scratch disks"is write protected or unavailable. To open this project, the "scratch disks" will be set to your Documents folder. Do you want to continue? »

  On our portable system Edition (Mac 10.6.8 CS 5.5) on some occasions when I plug a firewire drive, PP open, create a new project, I get the above message. When I click "Yes" to continue and open the Panel of projects all the disks scratch that I put for the disc show just that I had chosen them, not the documents folder. What gives? PP is looking for old projects, I created on different portable players, even if I'm not trying to open them (and they are not connected)? Seems strange.

  Oops, I didn't read your initial post correctly.  The Scratch disk settings are stored in the preferences, and so if you do not have the last drive connected that you set as your Scratch disk when you exit the last, then you will get this message.

  There is nothing wrong with that: your last drive selected is not available.  You see a message similar to the PCF, when you changed the external drives, or took the last than the one you used offline.

  The 'write protected' part of the message refers to the situation caused by the permissions mentioned in my first answer.

  I never chose to scratch disks (I don't capture Ribbon.), so I've never seen this message myself.

• I get the error message "Microsoft Client Protection has been found", but I don't have MS Security Essentials installed now what

  First story... I installed MS Security Essentials, but I get something into my computer that caused his failure.  It would not uninstall, and then finally after a long struggle I finally got deleted.  I have no reference to it in the registry nor are there all of the folders on the computer I can find have all files to make it.  I tried to install it again but I always get an error that it cannot find the mp_ambits.msi file.  Even when I run at the prompt of msg in the folder newly created with this file in there.

  I then tried to have at least the Defender installed to see running windows and then I get the "Protection of the MS Client has been found" which refers to the MS Security Essentials, which is not installed.  But there is obviously some there remains something that makes my system "THINKS" that Essentials is installed.

  Anyone has an idea on how the devil clear this issue so that I can either install Windows Defender or Security Essentials?

  Hi BillSheets,
   
  Try to use the cleanup utility to remove the program completely from your computer:
   
  For more information, see:
  List of tools to clean/uninstall anti-malware programs
   
  Before installing Security Essentials, refer to this article:
  Checklist for installation of Microsoft Security Essentials

• Error message to client Fund "invoice number not found.

  I've set up by Authorize.net and PayPal, regardless of the selected payment options, I get the same error message. See link www.lonewolftrading.co the card is in charge, PayPal has not come at all. Any help would be appreciated. Thank you.

  Hello

  Try the suggestion of this thread, Re: payment by credit card with eway returns 'invoice number not found' on BC