After vSphere client upgraded to 4.1 error received on host ESXi 3.5.0

Similar Questions

• VSphere client 5.1 found an error message.

  I connect on Vsphere client 5.1 found two warning and an alert message. I don't clear it and how to fix... Help, please.

  First of all:

  Controller HP Smart Array... .warning, I check my Hp server status via the ILO management, everything is ok.so I don't know what is the root cause?

  Second:

  License of surveillance capability,

  

  Thrid:LDAP

  

  Check this: State of the ESXi 5.0 material shown as warning - but not... - HP Enterprise Business Community

• vSphere Client 5 U1 unable to connect to the host of U1 ESXi 4.1

  Hello

  I'm having a small problem.

  I am currently using vSphere Client 5 U1 (5.0.0 Build 623373) to connect directly to ESXi hosts (still no vCenter).

  I can connect successfully to 5.0 U1 hosts, but I have a few hosts U1 4.1 inherited in the lab which I just can't connect with.

  A little research in the compatibility tables show that with the most recent client, I should be able to connect do former ESXi hosts.

  However, when I try to connect to this host U1 4.1, I get a popup to update with the message "customer support required files must be extracted from the 'vsphereclient.vmware.com' server and installed". And then I get a prompt to install/save a Setup program.

  What is this new installer? Another version of the Client? Have I not the newest one? Anyway, I can't complete the download for this new installer (connection failure).

  The host of ESXi 4.1 is on the network and I can connect with an older Client (4.1) that is installed in a different workstation.

  What happens here?

  Thanks in advance!

  You must install as vSphere client major versions (3, 4, 5) but VMware tries to make this process as transparent as possible. That's why it asks to install it automatically.

  Once installed, just launch v5 and it automatically and transparently pass the correct version if you connect to a 4.x server.

• The xbox 360 Media Player no longer plays music after that I upgraded my CPU. Error message: media sharing service has been terminated

  Original title: the xbox 360 Media Player plays more music after I upgraded my CPU

  I have Vista 64 SP2.  The service runs for 5 seconds and then I get the message that she stopped. He was works well for years (my Xbox 360 sharing), I'm guessing he stopped a few weeks ago after I put in a slightly faster processor. I watched a some tech posted and tried to run the program which seeks the corrupted system files, but the only files that it could not pay had to do with the sidebar Windows. I have removed and put back my media extender, I thought that it worked because I've seen (from my xbox) miniature images, videos and music counting upward, as they have been added and I could see them. But if I take one he freezes for a few seconds and then says the media sharing service took end (or something like that). Then, I go to my PC and see that it stops. I can restart, but it only lasts for 5 to 10 seconds.

  I also say a post about deleting files in C:\Program Data\Microsoft\DRM, but I have all the files in there. Just a server folder empty.

  Hello

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. Click Start.
  (b) in the search box type eventvwr.msc, and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• vim.fault.HttpFault during the sorting of virtual machines in vSphere Client after update 5.1

  Hello. I recently completed an upgrade to vCenter 5.0 > 5.1. I came across some problems common to the teeth with SSO, but things look ok at the moment. I have a problem I would really in trouble - when you try to sort virtual machines in the vSphere client, I see the following error message:

  Impossible to connect to the web service to run the query. Check that the service 'VMware VirtualCenter Management Webservices' works https://vcenter_server_fqdn: 10443 vim.fault.HttpFault

  It is reproducible on multiple systems running the VI client. The Viclient log shows:

  [viclient:SoapTran:P:43] 10:25:30.193 07-01-2013 invoke 4283 finishing on SessionManager:SessionManager [vcenter_server_fqdn] AcquireSessionTicket - series: 0.000, server: 001.425 [ERROR]

  Vmomi.Fault.SystemError: vim.fault.HttpFault

  to VirtualInfrastructure.ManagedObject.InvokeMethod (MethodName, Object [])

  at Vmomi.SessionManager.AcquireSessionTicket (String)

  at VmomiSupport.Services.AuthenticationTicketSource.Next)

  at VMware.VimServices.Query.Impl.LoginByTicketQueryCommand.CreateWebQuery)

  at VMware.VimServices.Query.Impl.WebCommandBase.Execute)

  at VMware.VimServices.Query.QueryServiceBase.Login)

  at VMware.VimServices.Query.Impl.QueryCommandBase.PreProcess)

  at VMware.VimServices.Query.Impl.WebCommandBase.Execute)

  at VMware.VimServices.Query.QueryServiceImpl.ExecuteQuery (QueryWebCommand)

  at VMware.VimServices.Query.QueryServiceImpl.Query (String, Int32, LanguageId)

  at VMware.VimServices.Search.Impl.Utils.NewResults (ResultsInternal)

  to VMware.VimServices.Search.ResultsImpl.RetrievePage (Nullable'1)

  to VMware.VimServices.Search.FilterOrderObjectSetProviderImpl'1.GetObjectSet)

  to VirtualInfrastructure.ObjectSetPoller'1.DoPoll)

  to VirtualInfrastructure.ObjectSetPoller'1. < survey > b__2 (Object)

  ...

  at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback (Object)

  [viclient:SoapMsg: P:43] 07-01-2013 10:25:30.193 Vmomi.SessionManager.AcquireSessionTicket of application of RMI - 4283

  " <: containing soap envelope = ' http://www.w3.org/2001/XMLSchema "" xmlns: xsi = " " http://www.w3.org/2001/XMLSchema-instance "xmlns:soap =" " http://schemas.xmlsoap.org/SOAP/envelope/ ">

  < soap: Header >

  < operationID > 4C83B7E2-000010BB < / operationID >

  < / soap: Header >

  < soap: Body >

  < AcquireSessionTicket xmlns = "urn: internalvim25" >

  < _This xsi: type = "ManagedObjectReference" type = "SessionManager" serverGuid = "3089D6D0-307C-4B0D-8BD8-94606298C034" > SessionManager < / _this >

  < serviceKey > 1b27d894-3e47-4431-9d7b-c8cb2fd457aa / VIMWEBSVC < / serviceKey >

  < / AcquireSessionTicket >

  < / soap: Body >

  < / envelope soap: >

  Invocation of method error Vmomi.SessionManager.AcquireSessionTicket - 4283

  Message: vim.fault.HttpFault

  XML server:

  " < = xmlns:soapenc soapenv:Envelope ' http://schemas.xmlsoap.org/SOAP/encoding/ "xmlns:soapenv =" " http://schemas.xmlsoap.org/SOAP/envelope/ "container =" " http://www.w3.org/2001/XMLSchema "" xmlns: xsi = " " http://www.w3.org/2001/XMLSchema-instance ">

  < soapenv:Body >

  < soapenv:Fault >

  ServerFaultCode < faultcode > < / faultcode >

  vim.fault.HttpFault < faultstring > < / faultstring >

  < detail >

  < HttpFaultFault xmlns = "urn: internalvim25" xsi: type = 'SystemError' >

  < reason > invalid problem < / reason >

  < / HttpFaultFault >

  < / details >

  < / soapenv:Fault >

  < / soapenv:Body >

  < / soapenv:Envelope >

  [viclient:Error: P:43] 07-01-2013 10:25:30.193 RMI error Vmomi.SessionManager.AcquireSessionTicket - 4283

  < type = "Vmomi.Fault.SystemError error" >

  < message > vim.fault.HttpFault < / Message >

  vim.fault.HttpFault < DetailedMessage >

  < / DetailedMessage >

  lack of < reason > disabled < / reason >

  < / error >

  [viclient:Error: M: 4] 01-07-2013 10:25:30.193 System.Exception: unable to connect to web services to run the query.

  Verify that the 'VMware VirtualCenter Management Web services' service is running on https:// vcenter_server_fqdn: 10443

  to VMware.VimServices.Search.FilterOrderObjectSetProviderImpl'1.GetObjectSet)

  to VirtualInfrastructure.ObjectSetPoller'1.DoPoll)

  Vmomi.Fault.SystemError: vim.fault.HttpFault

  to VirtualInfrastructure.Soap.SoapServiceWrapper.DoInvokeSync (ManagedObject mo, MethodName, methodName, Object [] parameters, Int32 timeoutSecs)

  to VirtualInfrastructure.Soap.SoapTransport.VirtualInfrastructure.Transport.InvokeMethod (pars ManagedObject mo, MethodName, methodName, object [])

  to VirtualInfrastructure.ManagedObject.InvokeMethod (MethodName, methodName, Object [] leave)

  at Vmomi.SessionManager.AcquireSessionTicket (String serviceKey)

  at VmomiSupport.Services.AuthenticationTicketSource.Next)

  at VMware.VimServices.Query.Impl.LoginByTicketQueryCommand.CreateWebQuery)

  -End of the exception stack trace internal-

  [: Sink: M: 4] 01-07-2013 10:25:30.240 error: unable to connect to web services to run the query.

  Verify that the 'VMware VirtualCenter Management Web services' service is running on https:// vcenter_server_fqdn: 10443

  vim.fault.HttpFault

  Stack trace:

  at VirtualInfrastructure.Utils.Log.Trace (String, String, traceCategory)

  at VpxClientCommon.Util.Dialogs.Trace (String, String, String, traceCategory)

  to VpxClientCommon.Util.Dialogs.ShowError (IWin32Window, String, String)

  at VpxClientCommon.ListViewData.OnDisplayMessage)

  at VMware.CustomControls.ListViewEx.DoDisplayMessage)

  at VMware.CustomControls.ListViewEx.WndProc(Message&)

  ...

  at System.Windows.Forms.Application.Run)

  Any ideas/suggestions would be welcome

  My apologies for not updating this post - I completely forgot

  I ended up spending a call with VMware and the resolution in my case was to add my user account in domain directly to the vCenter administrator group - before I had been a member of a group of ESX-Admins who was a member of the Administrators group. I hope this helps...

• Extend the data via vSphere Client store - error ' call 'HostDatastoreSystem.QueryVmfsDatastoreExtendOptions' object 'ha-datastore System' on ESXi 'IP' failed '.

  Hi @all,

  I want to thank my datastore on my 5.1 esxi.

  When you extend the data store on the vSphere Client Console, I get the error message:

  German: Call von 'HostDatastoreSystem.QueryVmfsDatastoreExtendOptions' as Objekt "ha-datastoresystem" auf fehlgeschlagen ESXi 'IP' ist.

  English: Call 'HostDatastoreSystem.QueryVmfsDatastoreExtendOptions' to object "ha-store system data" in ESXi 'IP' failed

  Anyone an idea why I can't extend the data store? The new drive is correctly detected.

  Best regards

  Andreas Acker

  Hello

  This seems to be a local data store. ? This is where the ESXi host is installed. ?

  Thank you
  Avinash

• Cannot download vSphere Client after patch installed

  I installed the latest patches for my two ESXi v4.1 servers using the vSphere Host Update Utility. the servers are now build 1363503.  In a web browser, when I go to the home page of each server to download vSphere Client, I get the following error: error HTTP 404 not found.  The link points to:

  http://vsphereclient.VMware.com/vsphereclient/1/2/9/8/9/7/7/VMware-viclient-All-4.1.0-1298977.exe

  What should I do to be able to download the latest vSphere Client for ESXi v4.1?

  It should be fixed soon. I think not many people noticed cela and use the former clients to connect to ESX.

  Concerning

  Girish

• vSphere client install error J# 4113

  I installed on a server vSphere and visited by his IP address in my browser. He gave me a link to download the vSphere client. However, when I try to install this client I get the following error:

  -

  ---

  VMware vSphere Client 4.0

  -

  ---

  The Microsoft Visual J# 2.0 Second Edition installer returned the error '4113' code.

  -

  ---

  Ok

  -

  ---

  If I extract the installer with WinRar, it says:

  -

  ---

  VMware vSphere Client 4.0

  -

  ---

  Error 25070.Setup has detected that the Microsoft

  Prerequisite of Visual J# 2.0 second edition is not

  installed on this system. Please install this prerequisite

  and try again.

  -

  ---

  Ok

  -

  ---

  I am running Windows Vista x 64, which comes with .net 2.0 and 3 and I also have Visual Studio 2005 installed on the computer, so I don't know why he tries to install this in the first place, and still less why it's a failure.

  I got it, all you have to do is to uninstall the existing Microsoft Visual J# via the control panel.

  Once uninstalled rerun vSphere install and it ends without error.

• Users of Active Directory cannot connect to vCenter 5 device via vSphere Client

  I'm unable to use credentials to access AD unit vCenter 5 via the vSphere client. I get an error message that I can log in because of 'incorrect user or password name' I am able to connect with this AD username and password for my vCenter 4.1, and environment to my RDP hosts by using the credentials of the AD, if AD works very well. And the password that I entered is correct.

  I could connect with AD credentials two weeks ago. Two weeks ago I stopped being able to connect with the credentials of the AD. I dropped back to the use of the local access through the vSphere client root user login. It seems that two weeks ago, my Oracle user passwords has expired. I fixed that by connecting to the EM console and responding to the command prompt to change the passwords. I've "changed" them to return the same password. Then, I subsequently put the limit password_life_time unlimited in the default profile. I tested since the vCSA admin interface the database settings. The settings saved and restarted the service VPXD.

  I have a 5.0.0 - 455964 vCenter device connected to an Oracle database. I activated the AD authentication in vCenter web admin GUI. I restarted vCenter Server Appliance after you have enabled this feature. I have validated that the time on the device of vCenter and the Active Directory zone are less than one second on the other. DNS forward and reverse unit number of AD and self-esteem are good. DNS is hosted on the AD controller, so I have connectivity between vCenter and AD. I run the query domainjoin-cli command and output is correct. I checked from the vSphere that my AD user customer and the ad group each received the Administrator role for the vCenter in the permissions screen object.

  Any ideas where to look next?

  Paul

  Hello

  (1) log the vCenter Server Appliance as root.

  2) reset the number of connection attempts that have failed for the domain user assigned with the command:

  / sbin/pam_tally - reset user user@domain--

  (3) to determine the status of each user, run the following script:

  to CONNECT to ' / opt/same/bin/lw-enum-users | grep name | AWK {' print $2' '}'
  do
  DOMAIN = $(écho $LOGIN | cut-d ' \'-f1)
  USER = $(écho $LOGIN | cut-d ' \'-f2)
  / sbin/pam_tally - user $USER@$DOMAIN
  fact

• vSphere client problems (free 4.0)

  We have done some Windows updates late and now our vSphere client does not start. We receive the EXACT same errors described in this Ko - http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1022611

  We are able to access that host to another client installs on other systems, but this it the primary server used to administer the host so it must be fixed. Can I just install the vsphere 4.1 on the 4.0 client client (even if the host is 4.0) or do I need to get version 4.0, 1/2?) It is a facility more or do I need to uninstall/reinstall.

  I guess the worst case scenerio I could just uninstall this update of .NET that broke it. Update of the host is NOT an option at this time.

  TIA!

  Download vCenter 4 U1.  There the packed client in which you can install separately after the launch of autorun.

  http://downloads.VMware.com/d/details/vc40u1/ZHcqYmQlcCpiZGVqdAis

• vSphere Client does not connect

  Since today the vSphere client does not connect to one of our 3 esxi servers

  all have the same error:

  No connection available

  VSphere Client konnte keine connection "10.2.180.5" zu der recovering.

  Ein unbekannter Verbindungsfehler aufgetreten ist. (Fehlgeschlagen Anforderung ist, zu der Die da Remoteserver Hat lange nicht atmosphere.) (As procedure passed timeout))

  Translation:

  no connection

  The vSphere client unable to connect to...

  A unknown connection error has occurred... timeout because the remote server has not responded

  Ping as 10.2.180.5 ausgeführt wird mit 32 bytes of data:

  Antwort von 10.2.180.5: bytes = 32 time < 1 ms TTL = 64

  Antwort von 10.2.180.5: bytes = 32 time < 1 ms TTL = 64

  Antwort von 10.2.180.5: bytes = 32 time < 1 ms TTL = 64

  Antwort von 10.2.180.5: bytes = 32 time < 1 ms TTL = 64

  as you can see the ip address is local and the customer to the web UI works no problem but I like to use the vShpere client

  I have no idea why its not connecting

  same problem for 2 esxi in internet... from my PC at home I can connect without problems

  all ideas are welcome im really out of ideas

  some info:

  Win7 64 bit

  ESET AntiVirus 6 Endoint

  no firewall (windows firewall disabled)

  Fixed: changed to Google DNS (8.8.8.8) in-house DC DNS and everything works... really strange because I use IP to connect

• Cannot connect directly to Esx via the vSphere Client.

  Hello

  I can not connect directly to ESX through the le VSphere client. I have the following message:

  "Can not connect to "xxx"vSphere Client. Un unknown connection error has occurred. (

  The customer not able to send a complete application on the server. (Underlying connection was closed. An unexpected error has occurred when sending.)). »

  
  

  Le ESX reply to ping et name resolution are correct. They are seen by the vCenter and sshh connection to ESX is possible.

  
  

  Version: Esxi, 5.5.0, 1892794

  VSphere Client 5.5.0, 1880841 on Windows XP SP3
  

  
  

  Thank you for your help

  Have a look here: vSphere Client 5.5 and WindowsXP/Windows2003 & #8211; Unknown connection error & laquo; Mike Landry & #8230;

• Impossible to connect to vCenter Server 5.5 using the vSphere Client

  Hello

  
  

  I'm trying to configure VMware Lab home using the link below and I have reached a stage where I need to connect to vCenter Server using the vSphere client.

  
  http://boerlowie.WordPress.com/2011/12/13/building-the-ultimate-vSphere-lab-part-9-ESXi/

  
  

  I installed the package of 5.5 full vCenter server using the simple installation option and it includes vCenter server, single sign - on, Webclient vSphere, vCenter server and vCenter Server inventory service. All the the latter is installed on a virtual machine that is running Windows server 2008 R2 guest OS.

  
  

  Whenever I try to open a session on the vCenter Server uses the vSphere client, one of the following error is displayed.

  
  

  1. you do not have the permissions to connect to the server 'vCenter server IP address.

  2. cannot complete the connection incorrect username or password-, this error is visible when I do not specify domain\username domain user name and simply enter the user name.

  
  

  For the details of the error, please see the screenshots - vSphere_client_1, vSphere_client_2 and vSphere_client_3.

  
  

  As suggested in the link below, I tried to create an SPN and then set the SPN (Principal of Service name) and the UPN (User Principal name) in the Active Directory identity Source using the web of vSphere client (please see screenshot vSphere_Webclient_2)

  
  

  http://vinfrastructure.it/2014/01/issue-in-logging-into-vCenter-server-using-Windows-ad-credentials/

  
  

  To fix the permission error, I tried to add the domain user to the Administrators group on the server vCenter (see screenshot vSphere_Webclient_1).

  
  

  However, none of the above-mentioned resolution has worked.

  
  

  So can someone please help? I am stuck because of this problem and badly need help to move forward.

  
  

  Thank you

  AJMAL
  

  Able to connect to the vSphere Client do you use the [email protected] account?

  Have you already set up permissions on the server vCenter object?

  André

• VSphere client, cannot connect to Vmachine on ESXi5

  Hello

  I hope someone can helpme or guide me on this one.

  I already create two VMs on ESXi5 and their spouse on my domain, I can controlit from the console on esxi (via vsphere client)

  but... If I try to connect directly to the vmachine of my office via vsphere client I had a conection error

  I try with my domain user and the password

  I try with the checkbox "use the same windows credentials" and still the same...

  I thought maybe I give permmits to the vmachine directly from Esxi5, but I noticed that does not show in my area and I can't add my name of user or groups. I wonder if theres some how to join my esxi5 welcome to my domain and then can show my domain name such as an option to choose some users of group or individual userid

  (see attached)

  Thank you and have a nice day of departure (sound almost 07:00)

  Sawyer_MX wrote:

  I thought maybe I give permmits to the vmachine directly from Esxi5, but I noticed that does not show in my area and I can't add my name of user or groups.   I wonder if theres some how to join my esxi5 welcome to my domain and then can show my domain name such as an option to choose some users of group or individual userid

  You can join your ESXi your unter AD-> authentication services configuration.

  But that can only be allows you to assign permissions to allow users to connect to your server ESXi with the vSphere Client and do things over there, like create virtual machines or use its console your AD.

  To access the operating system inside the virtual machine remotely, use RDP, VNC, XDMCP, etc as a.p. said

  Concerning

• Storage in vSphere Client alert

  I just upgraded to vSphere client and manage an ESX 3.5 shows host... under the vSphere client data store alerts, but no detail... That suppose to mean? where can I find more information about alerts? I didn't have this option in VC 2.5

  Thakns.

  You go to the tab alarms and recognize the alarm?  Should have better details there as well.  You can also reset the alarm to the green.