I get the error message "Microsoft Client Protection has been found", but I don't have MS Security Essentials installed now what

Similar Questions

• Whenever I do a right click on a file I get the error message that Windows Explorer has a problem and needs to close

  original title: problems of files

  Whenever I do a right click on a file I get the error message that Windows Explorer has a problem and needs to close.

  Sometimes, the problem is caused by a third-party extension. ShellExView can be useful to see what shell extensions have been introduced in the Explorer. Lire read on this topic, then scroll down to download the x 86 (32-bit) or x 64 (64 - bit) version here near http://www.nirsoft.net/utils/shexview.html

  When you run it, click the column of company for sequence entries in alphabetical order. Suppose Microsoft entries are in good faith and focus on others. Is something listed that is useless or unknown? If so, select it and click the Red (on top left) task to turn it off. You can find more easy to disable them all and then reactivate (green area) one at a time and Explorer of execution until the culprit is found.

• get the error message"Windows Media Player has encountered a problem while playing the file. "When tying to play videos on my memory card

  get the error message"Windows Media Player has encountered a problem while playing the file. "When you try to play videos on my memory card

  Hello

  1. What is the format of the video file you are trying to play?

  2. do you have any third party audio or video codec installed?

  Follow these methods.

  Method 1:  Run the troubleshooter in the Windows Media Player settings.

  Troubleshooting looking for issues related to playback of audio and video files in the drive by checking its configuration and network parameters.

  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2:
  If you have installed any third-party codec or plug-in for Windows Media Player, uninstall them temporarily to check if they are causing the problem.

• I use Firefox version 3.0.19 and I have Windows 7. When I use Firefox as a browser, I can't print my emails. I get an error message: «not available pcfax» If I use IE I don't have no problems printing emails.

  I use Firefox version 3.0.19 and I have Windows 7, which came with a new computer. When I use Firefox as a browser, I can't print my emails. I get an error message: «not available pcfax» If I use IE I don't have no problems printing emails.

  This has happened

  Each time Firefox opened

  == 1 day with the new computer about two weeks ago.

  Looks like you got the wrong printer selected.

  When you get the print window, choose another printer in your printer dropdown. You seem to have a fax printer selected instead of a physical printer.

• Get the error message "Microsoft MSXML 4.0 or higher, not installed" when you use Nero Software

  Original title: using Nero Software on Vista service pack 2.0 and get error Microsoft MSXML 4.0 or not installed.  In my view, the folder is empty, I programs and I can simply download to Microsoft?

  Using Nero Software on Vista service pack 2.0 and get the error Microsoft MSXML 4.0 or higher is not installed.  I find that the MSXMLfolder is empty.  NERO software worked very well and I have no recollection of doing an update of MS or NERO, so don't know why it doesn't all of a sudden.  Do I create programs and can simply download the modules of MSXML from Microsoft?

  Hello

  Download and install the package manually and check.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=15697

  Hope this information helps.

• I get the error message "update system tray has stopped working". My Verizon Online backup program doesn't work so not.

  I have Verizon Online Backup.  I get the message above, and then some: "error [System.IO.FileNotFoundException]: SyncNShare\OnlineBackup.SyncNShare.exe.

  Track: To OnlineBackup.Common.Utility.ApplicationLauncher...

  Verizon Online backup is not able to work.

  Hi NancyB_598,

  Thanks for posting in Microsoft Communities. Provide the following information to understand the issue:

  ·         Did you do changes on the computer before the show?

  ·         When exactly do you get this error message?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Let us know if you need more assistance. We will be happy to help you.

  Thank you.

• I am trying to reinstall the software to scan a photo that has been uninstalled, but when I try it says its already installed. What should I do?

  I looked everywhere on my system and even used a Revo Uninstaller Pro to search traces but can find none.

  Hello

  1 have had any changes made on the computer before the show?

  2. What is the full and exact error message?

  I suggest you to see link and check if it helps:

  Diagnose and solve the program installation and uninstallation problems automatically

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

• When right click on a folder, get the error message saying "Windows explorer has stop working.

  original title: Win 7

  Hi guys

  I have srs problem on my windows, I use win 7 ultimate x 64 and whenever I right click on my files, I will revive an error that says 'Windows explorer stop workin' and I have 3 option 'Search soultion' which do not and "Restart the Program", I always need to select it, and then win explore it will restart itself and also close all folders and programs, etc. "Debug".

  Please tell me what can I do to fix this bug

  Thanks for your time

  Hi hind Roselyne.

  Please see the next with a similar problem and possible, especially the SpiritX MS MVPthread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working-Windows-7-64/62494d49-fcf4-493e-a2a2-bc5e5ee7b65f

  I hope this helps!

• After the installation of Windows Vista, I get the error message "" windows/System / * ' file was not found "

  Original title: after the new installation of windows Vista it does not work.

  After the new installation of windows Vista on my laptop Lenovo at startup, it displays "windows/System / *" file could not be found... I also tried to fix.

  Hello

  Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site

  go to their website and look for a driver and software download section

  Enter your model number for the last look drivers vista then download and install

  If you continue to have problems with it contact lenovo

  http://www.Lenovo.com/us/en/index.html

• I am running XP and now I can't re - install after installing Windows8, I I get messsage that floppy drive could not be found, but I don't have a floppy drive.

  I want my XP back

  I am running XP and now I can't re - install after installing Windows8, I get I messsage that floppy drive could not be found, but I don't have a floppy and player despite the choice of boot from my cd rom and by disabling the floppy drive the same message at startup When I scan for my cd rom he sees them, but say that they do not function correctly, any ideas what is happening? They were fine before, my BIOS did not change to recognize my cd rom?

  Reinstall Windows XP
  http://michaelstevenstech.com/cleanxpinstall.html

  Insert your Windows XP CD, and then restart your computer.

  When you are prompted to boot from the CD, do so. To do this, press any key on the keyboard.

  Windows XP will go into its configuration process.

  Once you arrive at the welcome configuration, press enter on your keyboard to start the installation process

  Press F8 on your keyboard to accept the license agreement

  Select the partition, and then press D on your keyboard to remove it

  Select Format the partition using the NTFS file system

  Press F on your keyboard to start the formatting.

  Installation files will now be copied to your hard drive

  Your system will be rebooted, the installation of Windows XP will continue

• I get the error message: maigration failed to transfer when I install Windows updates. How can I fix

  I get the error message: maigration failed to transfer when I install Windows updates. How can I fix

  Hello

  Thanks for asking!

  You cannot install updates Windows and error migration was not able to transfer.

  The problem can occur if the update of the components are damaged.

  Is the message of exact error that appears?

  I suggest you to reset the update components and check if the problem persists.

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756/

• get the error message "status.msi".

  After insalling windows XP Pro SP3 yesterday, everything was fine. Today, I turn on the computer and get this continuous message "status.msi" missing. I have accumulated my brain trying to find the file with no luck. Done a repair and still a problem.
  Also in the auto updates SP2 would not up-to-date.
  I need help in the form of simple please...
  Thank you

  Hi Michael6208,

  ·         You get the error message for Windows update?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: For windows, update problem, disable the security software temporarily.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article to reset the Windows Update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." How should I do?

  Original title: Rundll error help

  As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." -What it means and how to fix it?

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• I get the error message "HTTP not found" and "SMTP." not found What is this and how can I fix it please?

  I get the error message "HTTP not found" and "SMTP." not found What is this and how can I fix it please?

  If you try to send or receive messages, you may receive an error message similar to the following error message, which indicates that your Post Office Protocol version 3 (POP3) or host SMTP Simple Mail Transfer Protocol () is not found:

  The host hostname is not found. Please check that you have entered the server name correctly. Account: AccountName, Server: servername, Protocol: POP3, Port: secure (SSL): no, error 11001, error 0x800CCC0D Socket number

  In addition, you cannot ping or establish a Telnet connection to the mail server.

   
  This problem may occur if you have the firewall from Zone Labs such as ZoneAla software...
  This problem may occur if you have firewall software from Zone Labs such as ZoneAlarm or ZoneAlarm Pro, installed on your computer. These programs may prevent communication with your e-mail server.

  RESOLUTION

  To resolve this problem, remove the software firewall from Zone Labs of your compu...
  To resolve this problem, remove the firewall from Zone Labs of computer software. To do this, see the program documentation or contact Zone Labs at the following of Zone Labs Web site for more information:

  http://www.zonelabs.com/services/support.htm (http://www.zonelabs.com/services/support.htm)

  MORE INFORMATION

  For more information about ZoneAlarm or to contact Zone Labs, see what follows...
  For more information about ZoneAlarm or to contact Zone Labs, see the following Web of Zone Labs Web site:

  http://www.zonelabs.com (http://www.zonelabs.com)

  For more information on how to resolve a similar error message when you use Microsoft Outlook on a computer that is configured as an ICS Internet (ICS) client, click on the number below to view the article in the Microsoft Knowledge Base:

  252322 (http://support.microsoft.com/kb/252322/EN-US/) OL2000: (CW) Error Message: The Server could not be found using ICS Connection

  For more information on how to solve an error similar to Microsoft Outlook Express and ZoneAlarm, click on the number below to view the article in the Microsoft Knowledge Base:

  274456 (http://support.microsoft.com/kb/274456/EN-US/) error finding POP3 or SMTP servers when you send or receive e-mail Messages

  The third-party products that are discussed in this article are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

  Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  later ducdive

• Get the Error Message When you try to download and install Vista Service Pack 1

  Hello

  Update Windows guard neglect when you try to download and install Vista Service Pack 1 and I get the error message 80092004.  Please notify.

  Thank you
  Andy

  Hello

  Welcome to the windows vista forums.

  1. stop the Windows Update service (make sure that you are logged on as administrator)

  Click the Start button | Control Panel | System and Maintenance | Administration tools
  Double-click Services.
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click on stop.

  2. Click Start, type %windir%\System32 in the search box and press ENTER.

  Find and rename the folder C:\Windows\SoftwareDistribution.

  3. start the Windows Update service

  Start button | Control Panel | System and Maintenance | Administration tools
  Double-click Services.
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click Start.

  This procedure will erase your history on the Windows Update Site. Not important.

  Don't forget to restart and then try the update again. If there is no corruption in that
  folder, it would be gone now.

   

  Please, try now to windows update and check if you get the error.

  You can also download the stand-alone SP1 package. You can download the windows vista SP1 by clicking on the link below, please follow the instructions in method 3 in the KB article:

  http://support.Microsoft.com/kb/935791#Method3

  I hope this information is useful.

  Please let us know if you need further assistance.

  Concerning
  Rehman - Microsoft Support