VSphere Client DNS server connection request

Similar Questions

• ESXi 5.5u1 added iscsi storage adapter - reboot and now vSphere Client could not connect to "my ip" an unknown error has occurred.  The server could not interpret the customer's request.  The remote server returned an error (503) server unavailable

  I have not yet connect to an iSCSI target device.

  I can ping my host

  when I open http:// "hostip" in a web browser, I get a 503 service not available.

  restart the host gets me nowhere.

  SSH opens somehow, but can not connect

  Console seems OK

  vSphere Client can not connect

  If I reset to the default values of the console it is ok, but when I reconfigure the host, this error will be returned.

  I tried to reinstall from DVD

  I'm completely corrected to date via SSH esxcli

  This happens on both my hosts, although they are almost identical Lenovo thinkserver TS140s with broadcom 10Gig NIC and intel NETWORK card integrated

  It almost always seems to happen the next time I reboot after enabling iscsi support

  The only weird thing I have is that my Integrated NIC is a processor intel 217's and I have to use a special VIB so that it can be used in ESXi

  Customer's winning 8.1

  Here is my installation notes

  Install on USB/SSD stick with custimized ISO i217 NIC driver, reset the configuration and reboot

  Management NIC set to NIC0:1Gig

  IP management: hostIP/24 GW: my gateway

  DNS:DNS on windows vm1, vm2 Windows dns

  HostName:ESXi1.Sub.myregistereddomainname custom DNS Suffixes: sub.myregistereddomainname

  Reset

  Patch to date (https://www.youtube.com/watch?v=_O0Pac0a6g8)

  Download the VIB and .zip in a data store using the vSphere Client

  To get them (https://www.vmware.com/patchmgr/findPatch.portal)

  Start the SSH ESXi service and establish a Putty SSH connection to the ESXi server.

  Put the ESXi server in maintenance mode,

  example of order: software esxcli vib install /vmfs/volumes/ESXi2-2/patch/ESXi550-201404020.zip d

  Re install the Intel 217 NIC driver if removed by patch

  Change acceptance ESXi host sustained community level,

  command: esxcli software - acceptance-level = CommunitySupported

  Install the VIB

  command:esxcli vib software install - v /vmfs/volumes/datastore1/net-e1000e-2.3.2.x86_64.vib

  command: restart

  Connect via VSphere client

  -Storage

  Check/fix/create local storage. VMFS5

  -Networking

  vSwitch0

  Check vmnic0 (1)

  Network port group rename VM to the 'essential '.

  Rename management group of network ports for management of basic-VMkernel traffic.

  -Configuration time

  Enable NTP Client to start and stop the host. ntp.org set 0-3 time servers

  DNS and routing

  Start the virtual machine and stop

  -enable - continue immediately if tools start - stop - prompted action Shutdown - the two delay to 10 seconds

  Security profile

  Services

  SSH - startup - enable the start and stop with host

  Cache host configuration

  -Properties to start SSD - allocate 40GB for the cache host.

  Flashing warnings SSH:

  Advanced settings, UserVars, UserVars.SuppressShellWarning, change from 0 to 1.

  Storage adapters

  -Add - add-in adapter software iSCSI

  I think I saw that I was wrong.  In fact, I applied two patches when only suited. I started with 5.5u1rollup2 and then applied the ESXi550-201404001 and ESXi550-201404020.  Strangely I did not t o had problems until I worked with iSCSI.

• vSphere Client could not connect with the server

  Hello

  I just built a new server ESX 4.0 (update1) and tried to connect directly from the VI Client.

  He keeps fails with the following error message:

  VSphere client could not connect with the server {ip address}

  Details: The server could not interpret the customer's communication... (The remote server returned an error: (503) server unavailable.)

  I can ping the server successfully.

  Has anyone seen this problem before?

  Thank you

  for many of my cases, it's just 2-3 minutes. can you do back to the rear for connection between the server and your laptop to see there is nothing between that is causing the problem?

• vSphere Client does not connect

  Since today the vSphere client does not connect to one of our 3 esxi servers

  all have the same error:

  No connection available

  VSphere Client konnte keine connection "10.2.180.5" zu der recovering.

  Ein unbekannter Verbindungsfehler aufgetreten ist. (Fehlgeschlagen Anforderung ist, zu der Die da Remoteserver Hat lange nicht atmosphere.) (As procedure passed timeout))

  Translation:

  no connection

  The vSphere client unable to connect to...

  A unknown connection error has occurred... timeout because the remote server has not responded

  Ping as 10.2.180.5 ausgeführt wird mit 32 bytes of data:

  Antwort von 10.2.180.5: bytes = 32 time < 1 ms TTL = 64

  Antwort von 10.2.180.5: bytes = 32 time < 1 ms TTL = 64

  Antwort von 10.2.180.5: bytes = 32 time < 1 ms TTL = 64

  Antwort von 10.2.180.5: bytes = 32 time < 1 ms TTL = 64

  as you can see the ip address is local and the customer to the web UI works no problem but I like to use the vShpere client

  I have no idea why its not connecting

  same problem for 2 esxi in internet... from my PC at home I can connect without problems

  all ideas are welcome im really out of ideas

  some info:

  Win7 64 bit

  ESET AntiVirus 6 Endoint

  no firewall (windows firewall disabled)

  Fixed: changed to Google DNS (8.8.8.8) in-house DC DNS and everything works... really strange because I use IP to connect

• vSphere Client for server 2012

  I installed Windows Server 2012 on my laptop and tried to install the vSphere client (VMware-viclient-all - 5.0.0 - 623373), but it comes up with "this product cannot be installed on Windows XP SP2 and more.

  Is there a way to get around this, or there at - it a newer version of the client that I can download that will work?

  See you soon.

  Martin

  Copy the file on your server and do a right click and properties and set compatibility, run as win7.

  installs and works very well, the MSI just the knowledge that there is a new version of windows.

• Unable to connect to vCenter Server 5.0 using the vSphere Client - unknown error.

  I am trying to connect to vCenter using vSphere client (from different computers, including the server itself) and get this:

  vSphere Client could not connect to "vCenter_Server_IP_Address".
  A unknown connection error has occurred. (The request has failed because of a logon failure. (Unable to connect to the remote server))

  I am able to connect to the host directly, but of course, can't do anything with it since the vCenter is "in da house".

  There is no problem with it, not big changes and nothing indeed directly on the server vCenter (i.e. W2008r2x64) so, my confusion deepens. 5.1 ESXi

  Any ideas what could have happened and how to fix it?

  observe the following error in the logs.

  2014-04 - 04T 13: 35:23.506 + 01:00 [error 02720 "Default" opID = SWI-f3a52464] [VdbStatement] given the driver diagnosis are 42000:1:1105: [Microsoft] [SQL Native Client] [SQL Server] could not allocate space for object ' dbo. VPX_EVENT'. 'PK_VPX_EVENT' in 'VIM_VCDB' database because the 'PRIMARY' filegroup is full. Create disk space by deleting unnecessary files, removing objects in the filegroup, a

  Follow this article to fix the problem.

  http://alexjs.EU/VMware-ESX-and-a-full-SQL-Server-database/

• VSphere Web client and client heavy cannot connect to Vcenter server 5.5, web client fails with 2032 error before the connection, then the work after one minutes ferw.

  Hi all

  I really need help here.  I have a new installation of Esxi5.5 and installed the server vcenter build 5.5.0.5201 device 1476389.

  I have host files properly configured for DNS and Server 2008 R2 running that I use to connect with the client or web client heavy.

  Initially, I get an error with the web client to connect, he began to paint Vmware and when it comes to 'r' in the name it fails with #2032, so I can no longer

  access the page at all, he says: connection refused for the page. If I wait a while I can connect again.

  heavy client vSphere fails at this time as well.  However, I cannot communicate directly with Vsphere client to server esxi host and it works all the time.

  There seems to be a problem with the device of vcenter server because the thick client fails, and does not open a backup program using vcenter server

  inventory when this happened.

  Please help, it drives me crazy...

  Dan

  Hello

  Since I found the solution to the problem of connecting to the device of vcenter.  It is a conflict of IP address on the network.  There was a machine with the same IP address virtuall

  as the vcenter server.  This caused intermittent problems etc.. Why web client would still work if I have the vmware client open I do not know

  so thank you for your help.

  Dan

• Cannot connect my vsphere client to manage my host... pls help!

  Thank you for reading... I'm new to esxi 5.1 and inherit a T110 Dell running a HD-250 GB for the OS (Esxi and Server 2008 r2) and 2-1 TB H.D for mirrow to SHARE DATA with the Microsoft software... (what a waste ah)

  everything was fine until about 2 weeks that I'm unable to connect to manage the server, it gives me the error:

  VSphere client could not connect to "IP address"

  A unknown connection error has occurred. (The client may not send a request to the server. (La connexion sous-jacente a été fermée: une erreur inattendue s'est produite sur un envoi.))

  If I point the browser to the IP Address of the host as: https://hostip (the page cannot be display)

  -Windows server is running

  -i can ping the Esxi

  Problem is that I have to update the memory and I'm afraid that after I have does not connect... and then I'm in big trouble... because I hand turned on inside the Esxi server.

  I did not backup, but the person in front of me was not do backups with veeam... instead they used a regular backup of windows on a USB software... I tried to create a re-usable collection and of course does not work... He was asking for a driver... I think it was for the hard drive... I free veeam now... but I can't connect it either... the box of Esxi.

  I would be grateful for any suggestion... Thanks in advance.

  You have access to the T110 Dell physical console?  Can you sign here?  If so, you could restart management agents:

  VMware KB: Restarting management on an ESX or ESXi host agents

  You can also enable the shell that allows you to try all kinds of connectivity tests:

  VMware KB: Using ESXi Shell in ESXi 5.x

  Connectivity tests:

  VMware KB: Troubleshooting network and TCP/UDP port on ESX/ESXi connectivity problems

• VMware Vsphere Client "Error unexpected envio" no puedo connect

  Hola a todos,

  I have an al servidor me conecto through VMware Vsphere Client. Hoy al try connect me salta este error:

  vSphere client could not connect to xx.xx.xx.xx a unknown connection error has occurred. (The client may not send a request to the server. (Se ha terminado la conexión: erreur inesperado de envío))

  If hago UN ping an IP the well esta responde y las maquinas office alojadas in el servidor estan well running. Intento connect desde a Windows 8 y otras veces conectado has no sin problemas, pero ahora no puedo. ¿Algun Consejo? MUCHAS gracias.

  Hola,

  El activated HE SSH, he accedido via consoled y ejecutado he:

  services.sh reboot

  Y el problema is ha solved. Este comando're valido para VMWare ESXi 4.x

  A greeting

• problem connecting to the vSphere client

  Recently I found myself unable to connect to the Esxi host at the data center via vsphere client 5.5 by multiple computers (Windows 7). It shows:

  vSphere Client could not connect to "xxx.xxx.xxx.xxx".

  A unknown connection error has occurred. (The client may not send a request to the server. (La connexion sous-jacente a été fermée: une erreur inattendue s'est produite sur un envoi.))

  All virtual machines resume normal. And the result of telnet seems normal to port 902:

  VMware authentication daemon Version 1.10 220: required SSL, ServerDaemonProtocol:SOAP, MKSDisplayProtocol:VNC, VMXARGS taken in charge

  However, if I access http://xxx.xxx.xxx.xxx:902 . He showed:

  VMware authentication daemon Version 1.10 220: required SSL, ServerDaemonProtocol:SOAP, MKSDisplayProtocol:VNC, VMXARGS taken in charge

  SSL: Unknown error SSL

  VMAuthdSocketRead: failed to read. The closure of socket for playback.

  SSH access has not been enabled, and I can't find any way to access the Esxi host.

  Anyone have any idea on the issue?

  You can try to restart on the host through DCUI management agents.

  This article might help you: VMware KB: restarting on a host ESX or ESXi management agents

• Unable to connect to new ESXi 5.5 with vSphere Client hosts

  Completed the new installation of ESXi 5.5 on two new Dell PowerEdge servers last night.

  Trying to connect to them through the vSphere client fails.

  I can ping both servers without any problems from the server where the vSphere client is installed (it is not a domain controller but a Windows 2003 server - it has not .net 3.5 SP1 is installed).

  If I try to open the IP address of the host in a web browser http://xxx.xxx.xxx.xxx expires, however, if I try http://xxx.xxx.xxx.xxx:902 It connects to the server, but rather than get the web page, I'm used to waiting with 5.1 I get this message:

  "220 VMware authentication daemon Version 1.10: required SSL, ServerDaemonProtocol:SOAP, MKSDisplayProtocol:VNC, VMXARGS taken in charge, taken NFCSSL in charge." I get this exact message even though I have telnet to port 902.  So I know that I can speak to the host, but have no idea why I can't connect to it or they have the tools to display in a web browser. »

  Try to use the same IP address with port 902 in the vSphere client to connect, I get this error:

  vSphere Client could not connect to "xxx.xxx.xxx.xxx".

  A unknown connection error has occurred. (The client received an invalid response from the server. (The server committed a protocol violation. Article = ResponseStatusLine))

  I noticed that there was a lag of 2 hours and 4 minutes between the host server and the client's server.  I have reset the time to match up in the BIOS of the host server.  The test gave the same results.

  Probably unrelated, but throw it out there in case it points to an answer, when executing the "Test management network", ping passes to the default gateway and the DNS server secondary (which is Google 8.8.8.8) but fails for the main DNS (local IP) server and host name resolution is faulty.

  Ideas, help or solution would be much appreciated.  I need to get the network to this customer virtualized this week, and I would prefer not to have to go back to 5.1 if possible.

  Thank you

  Mark Bowker

  This is resolved.

  And it's one of those things that you just kick yourself for.

  I tried this on two servers, Server 2003 and using IE8

  Tested a theory using a VPN to my laptop Windows 8 IE 10 and it has worked perfectly, then tested on a Server 2008 R2 using IE9 and it worked perfectly.

  Installed Chrome on the two Server 2003 servers and worked perfectly.

  So in the end it was IE8 that was not compatible and all the problems at the origin!

  Thanks again to you Andrew for trying to help!

  Mark

  Ed.  In fact, this is the exact reason that it did not work

  5.5 use OpenSSL ciphers and we will not be able to run the 2003 32-bit
  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=2049143&sliceId=1&docTypeID=DT_KB_1_1&dialogID=47844467&StateID=1%200%2047848621
  There is a fix for 2003 x 64 but not 32-bit

  Post edited by: Mark Bowker

• I can't access the DNS server

  I install AD and by default it also install DNS and I turn off DHCP on the router of LDC and configure the server.

  I have two NIC configured with IP address:

  8.8.8.8 and 10.x.x.x IP links

  1 NIC 10.x.x.x

  subnet mask 255.255.255.0

  DNS: 8.8.8.8

  2 Nic 8.8.8.8

  Subnet mask 255.255.255.0

  DNS 8.8.8.8

  I can not access the PC Client dns server, but can access the internet directly from the dhcp server, I can ping the dns 8.8.8.8 IP address but cannot access the domain. I want the client to connect to the dns server so that it can be easy to manage and add security measures. Can any expert server help me with that.

  Hello

  Thanks for posting in the Microsoft Community.

  This problem is better suited in the Microsoft TechNet forum, we have a dedicated team with advanced tools and permissions to help you with such questions.

  Post your request in the TechNet forum from the link below:

  TechNet forums

• DNS server records to monitor traffic.

  I do not understand much about it so I hope someone can explain to me.

  I have a server configured with a DNS server running successfully on my mac mini (dns primary server for the House).

  I was wondering if there is a way to capture the DNS server logs and monitor visited Web sites of specific host ips/name?

  I don't have an example to make immediately available, and I expect that it will be the analysis or an output channel created manually or otherwise searching the DNS server connects.

  If your firewall blocks all outgoing DNS traffic except for DNS queries on the server (this is to avoid without entering the DNS server, register via VPN or other), you can turn on extra logging through the command line, and then check the DNS server logs.

  This configuration is probably more commonly implemented with either a network sniffer I look for DNS queries arriving at your server, or perhaps a web proxy server, as this proxy server gets you the customer information and the target host information, as it won't be all kinds of activities related to the web-is in the DNS for a typical client newspapers.

  Activity network Apps, app updates (various which may seem HTTPS traffic, too), multiple streams of data, etc.

  HTTPS and VPN can throw a key in these listening and data collection activities, unfortunately.  They can hide the access or hide the DNS query, according to the monitored computers.

  There are approaches especially here, including the firewall of filtering (or notation) and the mechanisms of OS X such as Parental controls, depending on the specific details of your needs here.    There are examples posted around the network to use Wireshark or tcpdump to acquire the DNS of your network data, as well.

  Details on the management of the BIND 9 command line - i.e. when there is hair - are available in the ISC BIND documentation, such as 9.10.  Find statement grammar and record the setting up an output channel, as a starting point.

  For recent versions of OS X Server, BIND configuration files are under/Library/Server.  (See this discussion, as well.)

  Changes to the configuration files can sometimes fail.app, unfortunately.   Close.app, make the changes to a copy of the file, then restart.app (and I hope Server.app don't spill or undo your changes).

• Avoid or prevent mirroring of the console in vSphere Client

  I'm looking for more information on how to avoid and prevent the mirroring of the console in vSphere Client. As default the console could be perceived by several users at the same time. All those who have access to vSphere Client and server could connect and watch the console.

  Is it possible to configure how the Console should behave?

  Cordially Jens

  You can add the RemoteDisplay.maxConnections setting in the advanced configuration of the virtual machine settings and set it to 1. If you want to do it without interruption of service, add the following line to each of the. VMX files:

  RemoteDisplay.maxConnections = 1

  After editing the VMX file, vMotion, the machine to re-read the config (otherwise the changes do not take effect until the reboot), and who should do it. There is a script PowerCLI here that will try to change this setting on all of your virtual machines.

• How to let the user AD login to vSphere Client

  I have a small infrastructure Configuration. I'm no expert. Just trying to get this to work for one of my class projects where I need to let the members of my group access to a virtual machine. I have a domain created in AD user, and I like having this domain user to be able to connect on the vSphere Client to manage one of the virtual machines. How can I do this?

  Now, if I try to login with one user other than the domain administrator, I get this error message:

  the vsphere client failed to connect to 'servername '.
  

  you are not allowed to log on the server: "servername."

  You will need to login with the administrator account and assign a role to this user AD - this combination of user and role provides access to environment-