vSphere Client running on Windows 7 RC

Similar Questions

• How do I split my screen with windows 7. I'm a gamer and have two clients running in windows separated on the same screen would be very nice

  Gamer... need help to learn how to display shared

  Hello Talemacus.

  Everything depends on the game, most of the games have options to run in a window.  Once you've done this open a second instance of the program - assuming that it allows a second run and reduce the options for resolution as well they also well adapted to the screen, or move to a second monitor. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• VSphere Client errors after upgrade to 4.1

  Since I upgraded our infrastructure to 4.1 4.0, the Vsphere Client throws an error anytime it is left open for an extended time.

  If I open the client and let it sit for a few hours or overnight, I will go back to him and ther will be a popup of error with the following details.

  An internal error has occurred in the vSphere Client.

  Details: No enopugh storage is available to process this command.

  Contact VMware support if necessary.

  Once this bug has produced the error dialog box may not be rejected if you click Close, it just POPs upward.  The customer is inaccessible after this point, as the error dialog box is selected and that you can not touch the main window.  You must kill the client of Taskmgr.   Then it will restart and will work perfectly for a certain period.  Occasionally, almost hitting the error dialog will return to the client, but most of the tabs is not working and clicking on almost anything causing the error.  It is not a show-stopper, but it is a time wasting, irritating bug.  I've never seen the bug pop up while I was working on the customer, so I don't know what triggers it.

  The client runs on Windows 7 64 bit, but I have confirmed same behavior under the Server 2008 32-bit client.  I have not seen the error yet when the client is on Server 2003 32-bit, but I can't be left open long enough so that the error present.  Attached are the log files that the dialog box 'Error report to VMware' wants to send.  The customer is attaching to a server VCenter 2008 64 bit, not the ESXi hosts.  The smallest attached data store has more than 40 GB of free space.

  I have not supported active then the ratio to VMware dialogue suggested I post here.  It doesn't seem to be a community specifically for the customer and this started only after the upgrade, so I posted it in this community.

  Thank you
  Joe

  I think I followed the status tab of the hardware. If I use the hardware status tab and let it sit there for a while, memory begins to be chewed.

  I opened a SR w / Vmware, and they confirmed. Their words:

  "After a webex and looking through our internal KBs, I was led to a bug and the KB and the bug that both speak to the material status page causing a memory leak to do with CIMs and JAVA.  It looks like no to this question will be resolved in a future version, but it does not say clearly what version they will address in.  4.0U1's should be out soon.  I think of 30-90 days.  Workaround at this time is to not let the vSphere Client open for long periods of time. »

• Problem ODBC Oracle client installation in Windows 2008 R2 64 bit...?

  Hi all

  I am facing a problem for ODBC drivers as I installed client Run-time Windows Server 2008 R2 64 bit. Client has successfully installed can't seem to connect to the server database using input TNS through Sql in my command prompt, but the problem is that I am not able to create all the drivers ODBC in Control Panel (ODBC Administrator) Am not able to find a driver to configure a data source.

  Using this data source, we need to connect to the database of an application.

  Could you please help me on this.

  

  Best regards

  Martin Raymond Vinay

  Raymond Vinay wrote:

  Hello Stevens,

  Thanks for the reply. I installed the client 11g r2 64 bit and I tried this too much C:\Windows\SysWOW64\odbcad32.exe

  As I said, the (sysWOW64) is for the 32 bit.  You say now that you have installed 64 - bit, so that it does not apply

  but he has not found drivers. I have not found any odbc folder in the oracle client home. Could you please suggest what to do next.

  Now, we know that you have installed the 11.2 customer.  As I say, the ODBC drivers are NOT installed by default on this version.

  And if you do as I said in my last post:

  a default installation, then go back and do a "custom" installation, by specifying the same ORACLE_HOME as before and by selecting the ODBC components.

  Best regards

  Martin Raymond Vinay

  Jr. Oracle DBA

  Miracle Software Systems Inc...

• Multiple VCenters in one VSphere Client

  Kinda new to this but just curious, can you have multiple VCenters in a single client VSphere? Currently I have 6 VCenters I log in, I have therefore 6 vsphere client running.

  Welcome to the community.

  You can configure in bound mode. According the current scenario of you, you have already configured the vcente. If you need to add them in to a single pane view vcenter.

  Here's a nice blog that help you solve your problem.

  hope you find interesting.

  http://www.VKernel.ro/blog/configuring-VMware-vCenter-Server-linked-mode

  Thank you

• Customization of a Windows virtual machine fails - Crush Down vSphere Client

  Hi guys,.

  I met a very delicate problem.

  I tried to customize the Windows VM I cloned from the model (win2008R2), and I simply run the workflow 'Customize vm' in vCO, I think all the settings I gave should be correct (I tried to manually customize the virtual machine by using these settings, and it worked) and there is also no "naming problem" since I followed the rules here : http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2009315

  But once the workflow is started, I saw "customization is underway" in vSphere client, a minute later, this watch:

  

  And then it is reconnected, as if nothing ever happened...

  Anyone will throw some lights on it?

  Thank you very much

  He proved it to be: it seems that I couldn't customize a vm cloned from a template directly.

  I passed the entrance as a virtual machine, the problem disappeared.

  Or there could be something wrong with the model gave me, but my solution is deployed this model first as a virtual machine and clone out that vm for customization later.

  Thank you

• vSphere client on Windows 7 - customer closes when you try to import the machine

  Windows 7 Professional, vSPhere Client 4.0.0 vSphere vCenter 4.0.0 running on Server 2008 R2

  The client works for everything except the import of a machine. Once you click on the menu to import a machine, a specific host or the list of resources or a cluster, the client closes with no error given and not error in the Windows event logs.

  The same feature works from the same client on XP or Server 2008 R2. Full uninstall and reinstall does not solve everything.

  I have Win 7 x 64, found this article which seems to solve this problem

  http://michaelellerbeck.com/2009/11/16/vpxclient-exe-runtime-error-vSphere-vCenter-import-crashes/

  James

• A Remote Desktop Client running Windows 7 can connect to a server running Windows server 2003?

  A Remote Desktop Client running Windows 7 can connect to a server running Windows server 2003?

  Want to know if I need to upgrade a Windows Server 2003, if remote clients are upgraded from XP to Windows 7.

  Yes, windows 7 RD client connect to Server 2003.  You will see just a security warning, but you can just click Yes and connect as usual.

• vSphere client using the name Netbios on ESXi host does not connect using the credentials of a Windows session

  I have 3 ESXi 5.5 hosts, all connected to a single server vCenter, where we try to authenticate directly to the host by using the windows logon credentials. I have installation of the Administrators group of ESX and filled with the admin accounts that I want to be able to authenticate to the host. The Netbios name of the domain is tstdomain (for example) where the domain name is tstdomain.com. If I connect directly to a host and check the checkbox 'Use Windows Session Credentials', the vSphere client will default by using the Netbios name of tstdomain\adminusername and the connection will fail indicating that the username and/or password is incorrect. If I enter the domain name of tstdomain.com\adminusername, I am able to connect to the host without error.

  Does anyone know how get past that this matter have the vSphere client uses the domain name or to use the Netbios name and connect with the credentials to active directory? I looked by editing the file/etc/hosts and checked that the SPN of the host is correct in active directory with the command hostname setspn - l, with no luck on one. I also tried to change the field of research for the Netbios name of tstdomain rather than the tstdomain.com domain name, also did not work.

  Thanks in advance for your suggestions on how to correct the problem.

  Seems that this issue was due to a slow network and the connection timeout when you try to talk to the domain controller. I am able to connect with windows creds now, but the connection is very slow. I increased the default period of 30 to 60 seconds to help work around the problem.

• vSphere client on a machine Windows 10 - problems with mouse inside the VM consoles

  Aloha,

  
  

  I just upgraded to Windows Pro 10. I'm also using vSphere client 5.5.0 build 1618071.

  When the management of the virtual machine, everything is good and right with the world. But when I access

  a vm console - either by tab or open a stand-alone console window the mouse

  becomes very irregular on the desktop of the virtual machine. Movement is unpredictable. Right click

  on an icon, sometimes opens the correct pop-up menu. And when I get

  the menu, choose the desired action is almost impossible.

  
  

  Everyone knows this and has a solution?

  
  

  Mahalo,

  Bill
  

  
  

  
  

  I found this... it worked for me.

  Problems of mouse with VMware Workstation 10 and point Windows 8.1 - vInfrastructure Blog

  

• client vSphere 5.0 and Windows 8.1

  Hello.

  I can't install vpshere clinet 5.0 on windows 8.1

  This product cannot be installed on Windows XP SP2 and higher

  This solution does not work for me:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2069264

  
  

  And I heard if I download vsphere client 5.0 update 3 can I install it on the 8.1 but I question:

  
  

  If my vsphere is 5.0 and I connect to it with client 5.0 update 3 is it OK?

  Customer is 5.0 U3 not spoil with vsphere 5.0?

  
  

  
  

  Yes vsphere client is backward compatible...

  You can check compatibility here:

  VMware product interoperability matrices

• VSphere client on a server running terminal server

  Salvation; I think to offer vSphere Client access to some customers who wish to access a virtual computer a complete console.

  
  Someone at - configure a server terminal server (win2008 R2) and published the customer, so that the user can launch the vSphere client and access their virtual machine?

  As I read about it, it seems that a requirement is to have 6 Client RDP, which leaves the linux and Mac users, am I correct?
  Are there problems with it? In executing vCenter 4.1 at the moment, but will switch to the v5 this year.

  I tried to find some information about it, but can't find much.

  We provide the client vSphere (version 4.x and 5.0) on the servers Windows Terminal Server (Windows 2003 with Citrix XenApp 5.0) and it works flawlessy.

  Tested with all sorts of Citrix ICA clients, but also via RDP (including the old version of 5.1 client built into Windows XP).

  I never tested the RDP clients non - Windows, but I don't really expect any problems with them.

  -Andreas

• vSphere Client exe file take run

  Hello

  I downloaded the client vSphere exe file and double click it.

  It shows the normal 'open file - security warning' like any what other exe and I press button 'run '.

  Nothing happens.

  When I run the file as an administrator, nothing happens too. nothing. as I have not yet pushed.

  my computer:

  CPU Intel i7 2600 3.4 Ghz

  4 G memory

  Win7 Enterprise

  64 bit.

  Why nothing is happening when I ru the vSphere Client install exe?

  More questions than one. Run any software protection AV or endpoint on the host? In this case, make sure that these applications do not block installation. Even if this was not a problem with the vSphere Client - but only with VMware Workstation/Player - looking for a process of "fixcamera.exe". If this is the case, you can try to kill him before starting the installation.

  André

• Running vSphere Client (GUI) of USB?

  Hi all

  I have a simple question:

  Is it possible to run vSphere graphical Client for managing ESXi host from a USB key/key? (Essentially, a standalone GUI not requiring no installation.)

  I want to avoid installation on my laptop and all the paperwork and it will cause permissions...

  Thank you

  Stijn.

  PS: I tried to find the magic combination of keywords in my search unsuccessful queries.

  Stijn,

  I copied the "\Program Files\VMware\Infrastructure\Virtual Infrastructure Client" directory tree to a computer on which the VMware vSphere Client, was installed to another computer that had no front installed VMware software. Then I ran "\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\Launcher\VpxClient.exe" on the new computer and it works OK. So I think it will be possible to run the VMware Client vSphere since a USB device also. The directory tree has a size of 360 MB.

  Robert

• vSphere Client u1 Windows 7 x 64-SLOW

  Greetings!

  I've had this problem for a while now, and I just don't see anything like that on the forums that helped me with this. I'm on Windows 7 x 64, Core 2 Duo 2.33 Ghz, 8 GB ram, Nvidia Quadro FX 570 - a pretty Beefy system, and yet the vSphere Client, even update 1, redraws incredibly slow. I got a workaround in place before u1, and the GUI client had the same slow. I thought that would be fixed in the next version of update - apparently not!

  I supported amendments for the workaround. I uninstalled / reinstalled everything completely at least twice. Nothing did. The GUI is still very slow. This isn't a deal breaker, but it is VERY annoying to have to work with it every day.

  Has anyone experienced this and fixed it? I get to the point where I'll probably call support.

  Brendon

  show me some love and give me a few points