Problem ODBC Oracle client installation in Windows 2008 R2 64 bit...?

Similar Questions

• Performance problems on Oracle 11 G with Windows 2008 64 bit.

  Hello world
  
  I noticed that our database is going bad and low every week. My server has 16 GB of RAM and 10 GB are dedicated to the database Oracle, it is a 11.2.0.1 with Windows 2008 R2 SP1 64 bit. I would like to know according to the values of the movement following you guys recommend to adjust in the init.ora:
  
  ORCL.__db_cache_size = 5402263552
  ORCL.__java_pool_size = 33554432
  ORCL.__large_pool_size = 33554432
  ORCL.__pga_aggregate_target = 3657433088
  ORCL.__sga_target = 6878658560
  ORCL.__shared_io_pool_size = 0
  ORCL.__shared_pool_size = 1308622848
  ORCL.__streams_pool_size = 33554432
  
  * .memory_target = 10511974400
  * .open_cursors = 5000
  
  * .optimizer_mode = "RULE".
  * runoff = 300
  
  According to the target memory on how values can be increased the process, pga_agregate_target, etc.
  
  We also have problems with the bug Bug 9593134 "connection to Oracle 11 g are slow and can take anywhere from 10 seconds to 2 minutes." there is a difficulty on linux by removing dns names on this subject, but someone has experience on windows platforms?
  
  Thanks to all and sorry for my English.
  
  Kind regards.
  
  Arturo.

  Concerning the long connection times, have you tried to use the network (such as Wireshark) packet capture software to determine that the client computer when a connection attempt is initiated?

  The Oracle database time can help the model statistics and wait events extensive system you diagnose performance problems related to poor (you should not only look at the statistics, but rather capture the current values, wait a while, statistics capture again and compare the evolution of the values of the statistics). A statspack report may also help - but a trace 10046 to level 8 or 12 is more appropriate if you are able to identify a few sessions that have performance problems.

  I claim not just blindly changing the settings, even if I'm curious about:
  * Why the session level setting OPEN_CURSORS is set to 5000 - you expect a single session to hold cursors open 5,000?
  * Why do you use the obsolete RULE based optimizer?
  * Why the MEMORY_TARGET parameter is used when the target SGA_TARGET and PGA_AGGREGATE are specified?

  Charles Hooper
  http://hoopercharles.WordPress.com/
  IT Manager/Oracle DBA
  K & M-making Machine, Inc.

• Oracle Forms 11 g Windows 2008 R2 64-bit - cannot download the Addon

  Hi Fusion Middleware Admins,

  Installed Oracle WebLogic 11 g (10.3.6) 64-bit on Windows 2008 Release 2 64-bit and above which installed and configured Oracle Forms and reports 11 g R2 (11.1.2.2.0).

  I get the following error when accessing the Test URL in the forms using Internet Explorer 8.  URL:http://hostname:portno/forms/frmservlet

  An add-on for this Web site has failed. Check the security settings in the Internet Options of potential conflicts

  The URL added to the list of trusted site and activate all parameters activex inside the Security tab of Internet Options. Nothing has worked.

  Please provide your valuable contributions on it.

  Thank you

  Salih

  Problem solved. I've accessed the URL using Internet Explorer 8 64-bit and it worked.

  Thank you

  Mohamed Yusuf Salih

  Senior Oracle DBA

• Oracle 9.2.0.8 on windows 2008 R2 64-bit client installation

  Dear expert database;
  
  for specific needs, we need to install a client 9.2.0.8 to have connectivity with various databases.
  
  As I am a beginner in Oracle, can you tell me if it's good?
  
  1st part of client install Oracle 9.2.0.1 full (in architecture 32 or 64 bits?)
  
  2. install the patches 9.2.0.8 Group (in the same architecture as the first installation)
  
  3. install Patch 30 with O-Patch
  
  I have a lot of problems to find good sources for the OS/Architecture (windows 2008 R2 64-bit) version, I'm not sure that the old version of Oracle can be installed on this configuration.
  
  Can someone help me and tell me that it is possible to do?
  
  Thank you very much.
  
  Kind regards
  
  Thibaud.

  Salvation;

  I suggest to you please read on

  Client / Server / Support of interoperability between different Oracle Versions [ID 207303.1]
  Note to master for the Installation of the Oracle database [ID 1157463.1] Client

  Respect of
  HELIOS

• Oracle 10 g 2 64 bit odbc to oracle to sql server Win 2008 EE 64 bit

  Hi, I have a problem with a creation of 64-bit 10 g oracle to sql server odbc 2, I have several instructions with no luck at all. My OS is windows 2008 EE 64 bit on the server oracle and sql server.
  
  That's what I did
  
  1. in the directory of $oracle_home/hs/admin
  inithsodbc.ora
  # HS init parameters
  #
  HS_FDS_CONNECT_INFO = hsodbc
  HS_FDS_TRACE_LEVEL = off
  
  2. in the $oracle_home/network/admin
  listener.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
  (= Extproc PROGRAM)
  )
  (SID_DESC =
  (SID_NAME = hsodbc)
  (ORACLE_HOME=C:\oracle\product\10.2.0\db_1)
  (PROGRAM=C:\oracle\product\10.2.0\db_1\hs\hsodbc)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = xx.xx.xx.xx) (PORT = 1521))
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC0))
  )
  )
  
  And the tnsname.ora
  
  tnsnames.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
  # Generated by Oracle configuration tools.
  
  PRUEBA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = xx.xx.xx.xx) (PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVICE_NAME = test)
  )
  )
  
  hsodbc =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = tcp)(HOST=xx.xx.xx.xx) (PORT = 1521))
  (CONNECT_DATA = (SID = hsodbc))
  (HS = OK)
  )
  
  I create the connection odbc test, the result is TEST PASSED
  
  4. the i create a database on my database link
  CREATE THE DATABASE LINK XYZ PUBLIC
  CONNECT to 'sysdba' IDENTIFIED BY 'masterkey '.
  Using "hsodbc."
  
  5. run a select
  SQL > select * from dual@XYZ;
  Select * from dual@XYZ
  *
  ERROR on line 1:
  ORA-28545: error diagnosed by Net8 when connecting to an agent
  Cannot retrieve the text of the message NETWORK/NCR 65535
  ORA-02063: preceding 2 lines of XYZ
  
  6. when I check the log of the listener, I get this error
  
  March 25, 2011 11:48:40 * (CONNECT_DATA = (CID = (PROGRAM =)(HOST=) (USER = Administrator)) (COMMAND = status)(ARGUMENTS=64) (SERVICE = LISTENER) (VERSION = 169870592)) * status * 0
  March 25, 2011 11:48:47 * (CONNECT_DATA = (SID = hsodbc) (CID = (PROGRAM =) (HOST =)(USER=PRO\Administrator) PRO)) * (ADDRESS = (PROTOCOL = tcp (PORT = 49329))(HOST=xx.xx.xx.xx)) * establish * hsodbc * 12518
  TNS-12518: TNS:listener could not hand off client connection
  AMT-12560: TNS:protocol adapter error
  AMT-00530: Protocol adapter error
  
  Published by: user626125 on March 26, 2011 11:39
  
  Published by: user626125 on April 12, 2011 14:49

  I guess the point of the answer above was to close and move this thread to the appropriate forum.

• my software oracle 32 or 64-bit on Windows 2008 server (64-bit)

  I have a Windows 2008 Server(64-bit OS) in which oracle software are already installed (32-bit and 64-bit). But I do not know how to find the 32-bit oracle House and who is the oracle 64-bit home. I don't know when it was installed. I just want to know how could I check the address bit for oracle.
  
  Thanks in advance for the help.
  
  Kind regards
  Imran khan

  There are several ways (including those who work for only client installations) of MOS/metalink:

  How to check the size of Word (32 bit vs 64 bit) of the Oracle binary on systems MS Windows [465060.1 ID]

  Never tested, but this tool (filever.exe) should show the wordsize of an executable file or a dll:

  http://support.Microsoft.com/kb/913111

  Edited by: oradba the 23.11.2011 15:12

• Doubt w.r.t. the Oracle client installation

  Hello

  We will install oracle client. We use oracle net services to configure essbase with the help of oracle, which is installed in the other database server. That is why we are installing oracle client.

  Now my question is during the installation exactly customized including all the checkboxes should I check. There are a lot of items displayed in the installation window. I want to know what should I check to install only oracle net services.

  Help, please.

  Go to the Administration of Oracle Client installation. Then copy the TNS server entry and paste it to the customer.

  Start access, the database of the customer.

  Kind regards

  Selvam.M

• Installation of Windows 2008 R2 on ESXi 5.0

  Hi all

  I worked with ESXi 4 & 5 running Windows 2003 OS invited without problems.  Just tried to install Windows 2008 R2 x 64 and face an interesting difference.  When installing windows 2003 I have to specify the details of the Virtual Machine, specifically the amount of disk space I want to be available to host everything.  Then start the virtual machine, newly created from the windows installation disk appropriate.  I then get prompt with the "blue" screen allowing me to partition the space according to the BONE and once installation is complete I can then go through the operating system and partition and format the remaining space, as I hear it.  Doing so to a Windows 2008 R2 x 64 installation disk and I don't you this possibility so the BONE ends by using all the space allocated to the host of comments.

  I guess I'm missing something blindingly obvious, but have not been able to track down any relevant information to this day.

  Yes, you really lack the partitioning part.

  This is after selecting custom selection (advanced option) > select the drive you want to install windows > click drive options and partition your drive.

  Best regards, Harold

• Is Oracle 10g compatible with windows 2008?

  Hi all
  
  Is Oracle 10g compatible with windows 2008?
  
  What are the oracle 10g of the OS compatible with? It is compatible with the VMware environment too?
  
  Concerning
  Arun

  user12273523 wrote:
  Hi all

  Is Oracle 10g compatible with windows 2008?

  Yes

  What are the oracle 10g of the OS compatible with? It is compatible with the VMware environment too?

  Please check

  http://www.Oracle.com/technology/software/products/database/index.html

  Concerning
  Rajesh

• The Oracle Client installation

  Hello
  
  I need to install 10.2.0.4 Oracle client on a Windows Server. However, I have the basic version customer oracle 10.2.0.1.
  
  It comes to a customer's requirement. I can download the patch 10.2. 0.4 of metalink for customer install.

  Yes, you will need to download the pach defined for the server of Oracle database that you can also use to upgrade the Oracle database Client.

• 10g BI publisher Setup get error in windows 2008 R2 64-bit

  HI friends,

  I try to install the 10.1.3.4.1. and 10.1.3.4.2 in the windows 2008 R2 64-bit server.

  Run the setup.exe from the folder its audit and getting spent in the pre requires.

  And is not to open the graphical utility from Installer instead of as its showing an error like

  "setup.exe has stopped working".

  Windows can check online solution of the problem

  close the program.

  I downloaded the software from the following location in the RTO,

  http://www.Oracle.com/technetwork/middleware/bi-Publisher/downloads/index.html

  http://www.Oracle.com/technetwork/middleware/bi-Publisher/downloads/index.html BI Publisher 10.1.3.4.2 for Windows (32/64 bit) (1 GB)

  http://www.Oracle.com/technetwork/middleware/bi-Publisher/downloads/index.html BI Publisher 10.1.3.4.1 for Windows x 86 (765 MB)

  
  

  Please suggest us to go further...

  Waiting for the answer.

  
  

  Concerning

  Kumar
  

  Hello

  Thanks for the replies.

  The problem has been resolved.

  due to unzip the software in the longest trail, we got this error.

  Solution:

  We tried to unzip the software using 7zip.

  and unpacked the software to drive direct c (shortest path as C:\BPM\)

  Then I tried to run the setup.exe file, it worked very well...

  Once again thank you for their support.

• Windows 2008 r2 64-bit hangs... on virtualbox...

  Hi all

  I installed Windows 2008 R2 64-bit Enterprise edition, build 7600
  on virtualbox 4.0.0.

  the client blocks at different times of the day, and I can't
  (actually don't know where to look for problems) find the place where
  the problem is.

  While watching the "Event Viewer", it seems than before
  the system hangs, there is a registered general kernel event,
  indicating that time system has been adjusted.

  the last shot, took place a few minutes after the
  is adjusted.

  the previous move was produced just after the system time
  has been adjusted (in the same minute).

  I thought that this may be due to virtualbox zone mechanism,
  but I have another windows guest (2003 64 bit) on the
  VirtualBox, which does not exhibit this problem.

  (in fact, 2003 does not report any time adjustment at all)...

  our facilities in different locations (same version of windows
  2008 R2 64 bit) do not have this problem, but they are
  do not turn on virtualbox; they go directly on the HW.

  Anyone who has lived hangs on windows 2008,
  If it's due to time adjustments (i
  understand that it may not even be adjustments,
  events seem to happen quite closely together)...

  all tips and the help much appreciated,
  Thanks in advance,
  Sam

  Hi Sam,
   

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums, since it is related to the question on the Server 2008 machine. Appropriate in instances of Windows Server.

  Please ask your question in the Forums of Windows Server for assistance.

• Cannot install Windows 2008 Std 64 Bit on VM Machine

  Hello team,

  I'm unable to install Windows 2008 Std 64 Bit on VM Machine.

  Get an error like:

  Windows could not start. A recent amendment of the harddware or the software may be the couse. To solve the problem:

  1 insert the youe Windows installation disc and restart your computer.

  2. choose your language settings, and then click "next".

  3. click on "Repair your computer."

  If you don't have this disk, contact your system administrator or computer manufacturer for assistance.

  file:\windows\system32\boot\winload.exe

  Status: 0xc000035a

  I have traced the CD on the server, but giving this error.

  Kindly help me.

  Thanks in advance.

  Aloha-

  VT turned on in the BIOS of the host?

  Bill

• Slow access to the virtual machine network (Windows 2008 Server 64-bit) Windows 7.

  Hello.

  I have a problem when you access files shared on a Windows 2008 Server 64 bits on a client computer to Windows 7. It takes a long time (up to a few minutes) to for example open a Word file from the network share. It is not always, but quite often.

  This also happens on two different servers client with almost the same equipment. Which is a basic IBM x 3400 with hard drives in RAID. I disabled the feature of unloading TCP/IP on the network inside the VM card.

  Someone has an answer for this? Have I missed something, a configuration perhaps? I'm totally lost here...

  Kind regards

  -Jean-

  Try this fix:

  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 982860

  Enrico Giacomin

• Application pools and CF9 64-bit and Windows 2008 R2 64-bit

  Hi all.

  Since about 3 months ago, I got CF9 64-bit running successfully on a Windows 2008 R2 64-bit, and 64-bit PHP server.

  It was a few days get it all working happily together, but it's an entirely different discussion, I'm happy to help if someone at - it need help.

  My question is for someone with some experience and understanding of the relationship between IIS 7, Cold Fusion and Application Pools.

  We have 8 GB of RAM on a 3.2 GHz dual processor box.  And on this particular server, we have about 350 sites of cold fusion.  All sites of very low traffic, I should add.  Like maybe on average 1000 page clicks each day.  In any case these sites ran flawlessly on 2 GB of RAM box with two 1 GHz processors.  And honestly, it ran more surely than it does now.

  What role the Application Pools in an environment dedicated to Cold Fusion?

  Because only one instance of JRun is already launched, SEE crashes when requests overwhelms the box and it blocks.  So, kind of defeated the purpose of the independent application in my opinion Pools.

  During my installation and transfer of these sites, I gave them each their own independent Application Pool, which are now individual instances of IIS worker process, each using about 10 MB of RAM.  Thus, for example, if the interaction that happens with 200 websites that they eat up to 2 GB of RAM, which, although not large, is very well now.  The problem is that I intend to leave this machine reach 500 sites before adding another box, but I worry about the performance.

  FUNDAMENTAL QUESTIONS:

  Should cold fusion Pools of independent applications for each web site or all websites can be used under DefaultAppPool?

  And what are the advantages and disadvantages of the two options?

  Is there a setting I should change who will say active stop w3wp.exe instances if no activity takes place for a certain period of time to release the memory.

  Thanks for any input.

  Rush, the bottom line questions:

  Should cold fusion Pools of independent for each web site applications or can

  all of these Web sites running under DefaultAppPool?

  No, it's not 'need '. They can all run in a pool. It is probably best to split them somehow, so that is something is not bad in a single application pool, at least those of the other application pool still works.

  And what are the advantages and disadvantages of the two options?

  As you note, each application pool uses a little memory. Not much, but as you note, 200 + it adds up. FWIW, the application pool is also part of the connection between IIS and CF, and there are times where just a recycling application pool (rather than restart CF) can solve a problem.

  That said, there certainly are times where CF will be what does not, and it won't matter to the application pools how you have. That's really what you want to focus on: why (if ever) SEE becomes is not responding.

  Is there a setting I should change who will say active

  instances of w3wp.exe to stop if no activity takes place for a certain

  time to release the memory.

  It is the default behavior of the application pools. See the "Advanced settings" for each pool in IIS 7 (or for her properties in IIS 6) for the recycling of various parameters of health protection.

  To return to your root cause problem (CF becomes unresponsive), anyway, you say "these sites were without fault on 2 GB of RAM box with two 1 GHz processors.  And honestly he ran more surely than it does now. "So what was 'before '? Not just less memory, I guess. He was also 32-bit instead? Was that an earlier version of the CF? It is useful for you to be more specific.

  Again, everything that is wrong is an explanation. It looks like you use the CF Server (not multiserver) mode, until you find in the coldfusion9\runtime\logs (not the coldfusion9\logs)? There may be important information before your plant that explains what is happening.

  As for your struggles get CF running on IIS 7, I'm curious: was it the 9.0? If Yes, what 9.0.1 (the free updater, which must be installed today on a download of CF9) which supported for IIS 7. Previously, it was indeed a little manual to make work work. And in fact, it may be that an update to version 9.0.1 could help resolve some problems if your manual configuration efforts could have hurt at all.

  Hope some of it is useful.

  /Charlie arehart

  [email protected]

  Quick delivery, help desk services remotely, the demand for CF (and CFBuilder)

  More on http://www.carehart.org/consulting