vSphere replication bandwidth control.

Similar Questions

• Don't vSphere replication create control points which can be selected during the failover?

  Don't vSphere replication create control points which can be selected during the failover?  Or is the latest version of replication, the only option to failover?

  Thank you

  -MattG

  No, this isn't

  You CAN do this with EMC RecoverPoint (although not on a per VM level).

• Limitation of simultaneous jobs for vSphere replication

  Is there a way to limit the simultaneous use configured in vSphere replication?  It seems that we can only configure Apr but not simultaneous/concurrent jobs ran.  We have problems of saturation of bandwidth and therefore would like to prioritize virtual machines get replicated on before others.

  
  Thank you.

  It is not a way to directly prioritize VMs with vSphere replication. VR plans dynamically replications to try to meet RPO for all VMs replicated so if you have a few virtual machines that are not met the RPO I would reduce your RPO settings. You might also take a look at the VR bandwidth calculator: http://www.vmware.com/vrcalculator and determine what your pipe can support parameters.

• Throttling in vSphere replication

  I was not able to discover a way to set the limitation in vSPhere replication to SRM 5.0 of bandwidth. Is there a way it can be done, and if not, are there upgrades of all plans to introduce it in the future?

  If you have Enterprise Plus, you can use the NIOC for gas SRM traffic.

  Kind regards

  Paul

• Unable to connect target - vSphere replication Sites

  I hope someone here can help me understand a problem connecting between my two servers of VRM.

  Background:

  After passage of 6.0U2 5.5, I had problems with re-login Site Recovery Manager. Because SRM was not really in use yet (testing), I decided to redeploy fresh from the base, including replication of vSphere components.

  After removing all the rehearsals and not record old vSphere replication devices, I transferred the latest packages of EGGS to the VRM.  Everything was fine.  I have updated certificates for certificates customized our company certification and placed the root certificate in the file /opt/vmware/hms/security/hms-truststore.jks .  Then, I recorded each VRM with their respective vCenters and had no problems.

  

  Both VRM active lounge and OK in vSphere replication of the Web Client:

  

  When you attempt to connect to the target Site, the following error is received:

  

  But then in the list of tasks, it ends with success and shows the connection, but with a connection problem error:

  

  This is the architecture of our PSC and vCenters and each VRM.  All use of our certification of Enterprise SSL certificates:

  

  There is no firewall between one of these servers.

  HMS logs are attached here as well.

  Any help would be appreciated.

  Thank you

  After that I originally posted this, a new version of vSphere replication was released.  After the upgrade to the latest version, my problem magically disappeared.

• vSphere replication: can it be used with Hyper-V?

  I have a use case where I would like to migrate virtual servers (largely 2008R2) Hyper-V hosts to 5.5 ESXi hosts.  I know I could use vCenter Converter to do this in a procedure in 2 steps, or Zerto in a simpler process, but I was wondering if vSphere replication can be used.  I have not seen anything which seems to indicate that it can be used, but I thought I'd ask anyway.  Thanks for any input.

  Unfortunately, I do not see how it would be possible.

  Zerto / VMware Converter would be your best options

• Can I use vSphere replication for VMs on a logical unit number that is doing table replication to DR site

  Hi guys, could not find the answer on any Docs/KBs. With the implementation of normal SRM, I know you can use a mixture of the two, while a virtual machine is not protected by the table and vR.

  I need to make a site of NEW Dr. C while maintaining the current Bay of NETAPP on protection SRM of Site B.

  Will this be an approach to support? Step 0 is required?

  0 > get my guys to storage to stop replication on LUN - XYZ table (IF ANY) on

  1 > delete virtual machines on LUN XYZ of SRM existing Protection groups.

  2 > use vSphere replication to replicate the VMs who live on the LUN - XYZ

  3 > repeat the process until all LUNS have been treated like that.

  It should work without problem. I would recommend just a change in order to:

  1 (also remove the logic of the PG unit number), 0, 2, 3

  If you want to leave the computer on the same LUN virtual then step 0 is not necessary, but recommended (see below). If want to let the replication logic unit number and can just svmotion the VM, which would work as well.

  From a data protection perspective, as long as you understand the potential complications, I recommend you actually starting with step 2. Technically, you don't want to not have the same virtual machine reproduced several times, in this case since you are in transition, and if you understand that retrieve the VM using a method will break the other, and you can not the virtual machine protection with the two (VR & ABR) in SRM, you should be ok.

  Hope it makes sense. If this is not the case, let me know.

• vSphere replication vs. SRM

  What are the basic factors which would lead me to choose replication or SRM vsphere in a client environment?

  You ask a comparison of replication on Bay with SRM vs vSphere replication and SRM (SRM can use both) or ask about the differences between replication vSphere autonomous vs. SRM (with an RV or ABR)?

  If this is the first I would recommend this post: Articles VMware SRM - vs vSphere - VMware vSphere Blog - replication array-based replication

  If it's the second, VR does not include all the orchestration, test, reporting and class DR SRM operating company, but allows a protection individual VM and recovery into or through the clusters.  VR works to retrieve a few (less than 5-10) virtual machines as the recovery process must be made individually for each virtual computer. As mentioned made autonomous VR default orchestration, automation, without interruption of service analysis and account of the capabilities of MRS. VR is included in vSphere Essentials more than regulation or newer, the SRM is a VM or per CPU license (within vCloud Suite Enterprise).

• vSphere replication when vCenter is down / crashed

  I turn to convert our environment of re-usable in a VMware HA cluster, with MRS with vSphere replication Dr.

  I want to know what will happen with the vSphere replication in either of the following scenarios

  1. A: vCenter Server running, Site B: vCenter Server of the site down
  2. A: vCenter Server down, Site B: vCenter Server of the site down

  I'm not really able to find a clear answer on the web. I hope that replication of vSphere components still work, I don't know if the vCenter really need to work properly after the replication has been implemented.

  vSphere replication is not dependent on vCenter for replication. Is dependent on the vCenter on target for recovery website. So in your examples (assuming that you are replicating b > has):

  1. the replication continues. You can restore a virtual computer needed

  2. the replication continues. You would not be able to recover a virtual machine until vCenter was running.

  If you use SRM, SRM depends on vCenter (on-site running SRM) as well.

  Does make sense?

• Automate the network port group selection in vsphere replication

  Hi, when you use the vsphere replication tool to recover servers in the data center of DR, the tool does not gives option to select network settings. I have to manually add the port groups and turn on the system remotely vcenter. Is it possible to automate this process, when the replication of a major part of the vms ~ 100-150. I would like to know if there is another way to fix the process and avoid the manual load.

  I use replication of vsphere device version 5.8

  Thank you

  The only way to automate this process is through the Site Recovery Manager.  Automate and orchestrate BC/DR is a big part of the value offered by SRM. The other advantage is the ability to test your recovery plans without disruption of service.

  Does that answer your question?

• vSphere replication seeding

  Hi guys,.

  Basically the standard way to do a seed must turn off the virtual machine on the source site, make a copy of it and then she picks up on the site of DR to put it on a data store and the replication source site VM instance point to posterity.

  My question is rather than this cant you just use a POS/Veeam backup restore on the target site, itll be a bit outdated and replication of vSphere point to that?

  I take its probably not possible, I'm sure he would have been on the internet somewhere, if not I'm curious as to why not?

  See you soon,.

  Bilal

  vSphere replication requires that source and target UUID drives match. When restoring machines virtual/VMDK POS, Veeam, etc., restored disks get new UUID. You can manually change the UUID of each restored disc, but it's a little heavy. See this FAQ for more information: vSphere replication frequently asked Questions (FAQ) - the current version of this doc has moved to: https://storagehub.vmware.com/#! / vsphere-replication/vsphere-replication-faq

• vSphere replication 6.0

  Hi friends,

  What is the vsphere replication and how to install it, it either for backup solution, please explain

  In fact, VMware vSphere replication is used to replicate virtual machines within your environment vSphere or to the cloud.

  Yes. You can tell her to DR best solution and practice. FYI more detailed and you can explore self-esteem. :

  vSphere replication 6.0 Documentation Center

  Installation and basic configuration can be found on the yellow pages for version 5.0. its very similar to 6.0 except a few options.

  Install, configure and use vSphere replication (Back to Basics)

• Unable to deploy vSphere replication

  Hi people,

  I am studying towards my VCP 5.5 so please forgive me if I am ignorant even at some of the basics.

  I want to experiment a bit with the replication of vSphere in my lab at home and I am struck because I can't download/deploy the right thing.

  Study material said that it should be deployed as an appliance virtual fron an OVA/OVF file.
  then I tried to locate the latest 5.5 of vSphere replication subversion and I just this one:

  https://my.VMware.com/group/VMware/details?downloadGroup=VR5121_OSS & ProductID = 285

  That one did not work since I couldn't unpack the tar.gz on Windows file (tried with 7zip and Total Commander). So I downloaded some

  version 5.5 which I could decompress successfully but it contains a lot of RPM files, and I can't go any further.

  I also tried to Search Administration guide of replication on the vSphere deployment process

  1. connect to the vSphere Web Client on the source site.

  2select vCenter > hosts and Clusters.

  3 right-click a host and select deploy OVF model.

  4. specify the location of the file OVF in which you want to deploy the unit of replication vSphere and click Next.

  -Select the URL and enter the URL to deploy the unit from a URL online.

  -Select the Local file: Browse to locate the file .ovf if you have downloaded the zip on a local computer.

  So what now?

  Hello

  VR 5.8.x and 5.5.x is compatible with vCenter 5.5.x.

  Following the links on vmware.com, here's the download pages:

  RV 5.8.x:

  https://my.VMware.com/Web/VMware/details?downloadGroup=VR5802&ProductID=353&rPId=7710

  RV 5.5.x:

  https://my.VMware.com/Web/VMware/details?ProductID=353&rPId=7710&downloadGroup=VR5514

  The .zip file contains the .ovfs (of the unit combined VR and VR-Server device only) and two .vmdks.

  The .iso image files are the same and in addition .rpms focused on the CDROM to upgrade from previous versions.

  THE OSS. tar.gz file you found are the sources of packages based OS and other open source / third-party packages, including license requires VMware publish their sources along with RV parts.

  Kind regards

  Martin

• with vSphere replication to replicate vCenter Server in a VM

  Hi guys,.

  I am trying to find some info on this. I currently have vCenter 5.5 running on a Windows 2008 R2 VM server. I was wondering can I use replication to replicate it in some shared storage for backup purposes, and if I had to lose it could I recover and this and be good to go? He runs a database integrated. or is it as AD/SQL/Exchange and in general you shouldn't use replication or something of the sort for them.

  Also, if I have reproduced on the recovering site, I could pick it up and re protect him using MRS. and migrate to the main site once I had everything back up and restart? Is there a difference if I ran the vCenter device instead of the version of Windows inside a virtual machine?

  My apologies if this has been answered before that somewhere, it just went through my mind randomly and Googling gives me really a lot of results, so if its been answered somewhere, please point me in that direction.

  Hello

  vSphere replication requires vCenter to function, you cannot use VR to protect it that you wouldn't have a way to recover, unless it has been replicated on a different vCenter (whereby it might be recovered, but only inside the other vCenter) or if it has been managed by a different vCenter.

  If you are in the second option, where you have a vCenter management appliance RV, and you have an another vCenter, so yes, you can use RS in this model to protect and auto restore your internal vCenter.

  No difference in the functionality between vCA and windows version of vCenter.

  As for your statement: "or is it as AD/SQL/Exchange and in general you shouldn't use replication or something of the sort for them."

  -vSphere replication supports VSS suspension

  -I'm Okay I wouldn't recommend AD replication (SQL and Exchange or if you can use the built in replication at the application level)

  -If you can not however, most modern applications work very well in a consistent state of crash (VR normal replication) and the rest works with VSS

  Hope that answers your questions

• vCloud Air Disaster Recovery - vSphere replication of specific records

  In the most recent documentation for vSphere replication, the ability to select specific disks when you replicate a single workload is described:

  Documentation Centre of vSphere 5.5

  However, in the videos of vCloud Air DR, this option is not currently available. Is - this specific to Air DR vCloud or some videos of previous versions?

  vCloud Air Disaster Recovery: configuration of the Virtual Machine replication - YouTube

  Answer: No.

  http://vjourneyman.com/replicating-to-vCloud-air-Dr