vSphere Upgrade Guide 5.1?

Similar Questions

• Discover 5.3 on Horizon 6.0 Upgrade Guide

  Is their a guide to upgrade again for shooting up to the Horizon 6.0 5.3?

  HI amurrey

  Wait for the 6.0 GA Horizon, upgrade guide is normally available on the Horizon view documents here: VMware Horizon view documents

  Thank you

  Bayu

• VSphere upgrade

  What are the detailed steps for upgrading ESX 3.5 to VSphere 4.1? Preconditions for review before any installation/upgrade?

  Hello

  Thread moved to the vSphere upgrade and install Forum.

  Be sure to post in the appropriate forum.

  Best regards

  Edward L. Haletky

  Host communities, VMware vExpert,

  Author: VMware vSphere and Virtual Infrastructure Security,VMware ESX and ESXi in the 2nd business edition

  Podcast: the Podcast for security virtualization of resources: the virtual virtualization library

• Fonts needed to upgrade guide?

  I'm reading the 4.0 to 4.1 upgrade guide, but the PDF guard bombardment with 135 error, which indicates he calls fonts that are not found. Anyone know what fonts are required to read this PDF file?

  HM... you use google chrome to read the pdf "inline", perhaps?  I have the same problem, but if I save slot, Acrobat Reader works fine... Maybe need a glitch in the browser.

• presentations of vSphere upgrade phase

  I watched the webcast "How to upgrade from VMware Infrastructure 3 VMware vSphere 4 ' the other day and it showed in the webcast, they had made videos of webcast for each of the 3 phases of the upgrade.  I had written in my notes that these videos were located at www.vmware/com/products/vsphere/upgrade-center, but when I went to this place I couldn't find the webcasts.  Can someone point me in the right direction?  I am planning on the part of the management of the update in the next week and wanted to see their webcast for this phase of the upgrade.

  There

  http://www.VMware.com/products/vSphere/upgrade-Center/upgrade.html

  or simply click on the 'Upgrade' on the URL tab you mentioned

  André

• How to vSphere 4.1 vSphere Upgrade 5

  Hello

  I am currently using essential 6 Core CPU ESX 4.1 vSphere, I want to upgrade to ESX 5 licensed.

  Note: The ESX 4.1 installed on HP DL380 but I want to get to level 5 with new material that is DL 580.

  my current configuration of the server is G5 6 Core with 2 physical processors.

  new server configuration is G7 8 Core with 2 physica processor.

  Kindly guide me how to change and move all present VM in new?

  NOTE: I have two hosts with Clustered and HA.

  Kind regards

  Badr.

  Yes, according to "the VMware product interoperability matrices" (I have provided the link above) the hosts - ESX 4.1 Update 1 (348481) - are supported with vCenetr Server 5.0 and 5.0 Update 1.

  André

• Windows 7 Upgrade Guide for dv6000/dv9000 models

  Statement:

  You use this guide at your own risk. I take no responsibility for any problem.

  Things you need to know and do before the upgrade:

  1 HP may require that reinstall you Vista back if you have hardware problems to solve the.

  2 HP will not help you if you have software problems because these models are not officially supported

  with Windows 7.

  3. before you upgrade to Windows 7 will make it please Vista Recovery CD/DVD. How all the information here.

  4. all drivers Vista and software preinstalled by HP for your model are in the folder in C:\swsetup .

  If you still have on your HARD drive, then copy this folder on a CD/DVD. You may need them one day.

  5 users with nVidia graphics card should check the temperature of this device before upgrading.

  In this way you will know is it works fine under Windows 7 also.

  How you can check your laptop CPU (processor), the GPU (graphics card), the motherboard or HARD drive temperature?

  To do this use HWMonitor (free and recommended) or Aida64.

  How do you know what model you have and the specifications for it:

  1. click on the Support & drivers link. (The upper part of this page).

  2. in the search box, type your computer laptop product (p/n) number.

  Resources:

  How to locate the laptop n/p

  3. under a portable computer image, you will find the name of your laptop model (example: HP Pavilion dv6205eu notebook PC).

  4. on the same page, click on Product Information -> specifications and you will find all the information on

  your little laptop.

  How to install Windows 7 and what you need to know during the upgrade:

  1 guide: How to do a clean Windows 7 install

  2. all drivers for Windows 7, you will find in the next post below.

  3. some drivers have comment while they are initially made for Vista system.

  During normal installation will fail, and then try to run the file unsuccessfully installed in Compatibility Mode (Windows Vista,

  Windows Vista Service Pack 1 and Windows Vista Service Pack 2).

  Resources:

  Make older programs in this version of Windows

  How to run a program in Compatibility Mode in Windows 7

  CHIPSET DRIVERS

  Solution on COPROCESSOR with yellow exclamation mark () 

  If you have Intel processor:

  Intel chipset (Install and reboot before other drivers) here (version 9.1.1.1025 for 32/64-bit Win7)

  Intel Rapid Storage Technology here (ver 10.1.2.1004 for 32/64-bit Win7) 

  If you have an AMD processor:

  For models dv60xx, dv61xx, dv62xx, dv63xx, dv64xx, dv90xx, dv91xx, dv92xx, dv93xx and dv94xx (example: dv6367am means that your model is dvx3xx, dv9421xw means that your model is dv94xx):

  nVidia Chipset (Install and reboot before other drivers) here (Vista)

  For models dv65xx, dv66xx, dv67xx, dv68xx, dv69xx, dv95xx, dv96xx, dv97xx, dv98xx and dv99xx (example: dv6981tu means that your model is dv69xx, dv9721tu means that your model is dv97xx):

  nVidia Chipset (Install and reboot before other drivers) here   (Vista) 

  Important information for users with nVidia chipset!

  If you have 4 GB RAM or more, then read the article Microsoft Knowledge base on the solution of certain problems that you may have here.

  GRAPHICS DRIVERS

  Intel graphics:

  Inte l 950 and Intel X 3100 here (version 15.12.75.4.1930 for Win7 32 bit) or here (version 15.12.75.4.1930 for Win7 64 bit)

  nVidia Chart: 

  Important information!

  If you have installed all the drivers for graphics card nVidia, then until you install the other version will be

  you will first need to remove the old drivers. Check below how guide (that there is no standard uninstaller

  ( process):

  How to remove drivers Windows system nVidia graphics.

  Drivers:

  nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS:

  OPTION 1
  

  267.76 version here for Windows 7 32 bit or here for Windows 7 64-bit.

  OPTION 2

  Version 197.16 here for Windows 7 32 bit or here for Windows 7 64-bit.

  Note:

  Don't forget to first uninstall previous graphics driver.

  nVidia GeForce GO 6150 M, 7150 M, 7200 M, 7400 M or M 7600:

  OPTION 1

  First try installing the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  OPTION 2
  

  If the drivers will not work so try modded drivers worm 195.81.

  Note:

  Don't forget to first uninstall previous graphics driver.

  How to install Windows 7?

  1. download driver here (for 32-bit Win7) or here (for Win7 64 bit) double click and select extract,

  2 download from this site with the drivers also modified INF and replace original INF in extracted folder,.

  3 install and reboot.

  OPTION 3

  Last thing you can do is install graphic driver from Windows Update.

  Note:

  Don't forget to first uninstall previous graphics driver.

  1.open Windows Update by clicking on the button start , clicking on " all programs " and then clicking on '

  Windows Update '.

  2in the left pane, click " check for updates " and then wait while Windows searches the latest updates

  for your computer.

  3select the " optional updates " and install from there only driver for your graphics card.

  AUDIO DRIVERS

  Conexant HD Audio

  Use the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  Realtek HD Audio

  Use the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  If the Vista drivers won't work well for you then try to use Realtek official a of here (32/64 bit Win7).

  "" When you enter this link check it 'I accept the foregoing." and after that click on the " Next " button.

  MODEM DRIVERS

  Conexant Modem here (A worm 7.61.0.0) (Vista) - If you have the sound card Conexant

  Motorola SM56 modem here (ver6.12.6.0 A) (Vista) - If you have the Realtek audio card

  HP QUICK PLAY 

  HP QuickPlay here (ver 3.7 v.6112 for 32/64-bit Win7)

  Notes:

  • It must be installed before HP Quick Launch Buttons.
  
  
  • You have installed this software and it crashes when you use?

  Uninstall your current version of HP QUICK PLAY and install what you had in Vista.

  Resources:

  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  If you've burned CD/DVD with C:\swsetup folder as proposed in the guide then you will find it.

  HP Quick Launch buttons

  Solution on KEYBOARD FILTER with yellow exclamation mark ()  

  HP Quick Launch buttons here (ver 6.50.13.1 for 32/64-bit Win7)

  WIRELESS DRIVERS

  Intel Wireless here (ver 13.0.0.107 for 32/64-bit Win7)

  Broadcom wireless here (ver 5.60.48.35 for 32/64-bit Win7)

  Atheros Wireless here (ver 8.0.0.316 for 32/64-bit Win7)

  HP wireless Assistant here (ver 3.50.12.1 for 32/64-bit Win7)

  Bluetooth wireless here (ver 6.5.0.2000 for 32/64-bit Win7) only for models with Bluetooth.

  Note:

  How to install the Bluetooth driver?

  Click on the link below:

  How to install the driver Bluetooth HP Windows 7.

  ETHERNET DRIVERS

  LAN Realtek RTL8101 here (for 32/64-bit Win7) only for models with Intel processor.

  Models with AMD processors need not install any additional Ethernet file, because the drivers for it are in the chipset package.

  CARD READER

  Solution on BASE SYSTEM DEVICE with yellow exclamation mark () 

  Ricoh 5 - 1 card reader driver here (ver 6.10.01.03 for 32/64-bit Win7)

  TOUCHPAD DRIVER

  Synaptics TouchPad here (ver 16.0.1.0 for 32/64-bit Win7)

  Note:

  Default is activated the scroll two - finger. If you want to use only one finger to scroll, check out the link below:

  How to change two - finger scrolling on One - Finger scrolling in Synaptics TouchPad software.

  ONLY IF YOUR MODEL: WEBCAM 

  CyberLink YouCam here (ver 2.0.3115 for 32/64-bit Win7)

  Note:

  If you have a problem with your webcam, check below links to HP documents:

  Solve Webcam Windows problems

  Test a Webcam using your favorite Instant Messaging

  3VRX (optional software)
  

  on the screen the images and associated sounds that are displayed and heard when volume control

  3VRX here (version 2.5 for 32/64-bit Win7)

  Note:

  Here is YouTube video that shows what you can do with this software.

  ONLY IF YOUR MODEL HAS: FINGERPRINTS READER
  

  1. uninstall all software and previous fingerprint reader drivers

  Check below how guide (only it's non-standard uninstall process):

  How do I uninstall the driver and the AuthenTec fingerprint software

  2 you can install now correct fingeprint reader driver and software.

  There are two apps that are available on this device:

  - AuthenTec TrueSuite

  and

  -DigitalPersona Personal (recommended).

  Information on how to install the software you will find below guides:

  AuthenTec TrueSuite, fingerprint AuthenTec and Windows 7

  DigitalPersona Personal fingerprint AuthenTec and Windows 7

  ONLY IF YOUR MODEL: DVD PLAYER WITH LIGHTSCRIBE

  How can you check is your DVD with Lightscribe drive?

  The Panel of DVD, there will be a Lightscribe logo.

  

  LightScribe Host software [Link removed - Site is no longer available] (worm 1.18.22.2 for 32/64-bit Win7)

  Report of the changes that have been made in the guide

  Edited the 16/01/2010 updated Synaptics TouchPad driver to ver 14.0.3.1, update Broadcom driver to ver 5.60.18.41

  Edited the 18/01/2010 updated nVidia Graphic article. Adding drivers for nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS (version 195.62)

  Published the 19/01/2010 updated LightScribe software 1.18.10.2 worm host

  Edited drivers fingerprints of 02/05/2010 update, software and added guides to fingerprints.

  Published the 2010-02-27 updated LightScribe Host at worm 1.18.11.1 software

  Published the 03/03/2010 update HP Quick Launch Buttons to worm 6.50.13.1

  Published the 03/20/2010 updated Synaptics TouchPad to worm 15.0.9.0 (this version allows multitouch gestures)

  Published two guides added 21/03/2010. How to remove drivers Windows system nVidia graphics and how to install the HP Bluetooth driver in

  Windows 7.

  Published the 03/25/2010 updated LightScribe Host at worm 1.18.12.1 software

  Changed name Intel Matrix Storage Manager published 26/03/2010 to the Intel Rapid Storage Technology technology, has added Intel Rapid Storage Technology

  worm 9.6.0.1014

  Published on 31/03/2010 update nVidia graphics with uninstall guide section, updated drivers for nVidia GeForce 8400 M GS and 8600 M GS

  worm 197.16

  Published the 04/10/2010 updated LightScribe Host at worm 1.18.13.1 software

  Published the 05/04/2010 updated LightScribe Host at worm 1.18.14.1 software

  Published the 05/05/2010 updated Synaptics TouchPad driver to ver 15.0.13.0, updated HP QuickPlay for ver 3.7 v.6112

  Published 21/05/2010 Update for ver 5.60.48.35 Bradcom, Atheros wireless to worm 8.0.0.316 update, update Synaptics touchpad wireless

  15.0.13.3 worm

  Edited the 24/05/2010 update HP Wireless Assistant to worm 3.50.11.2

  Edited the 24/06/2010 updated Synaptics TouchPad to worm 15.0.17.4

  Published 30/07/2010 update Broadcom wireless - the same version but with a few improvements, HP Wireless Assistant updated to ver 3.50.12.1

  Added drivers published 04/01/2011 for nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS (ver. 267.76)

  Published the 04/02/2011 update software LightScribe Host at worm 1.18.22.2, added a guide: how to change two - finger scrolling on One - Finger

  Scrolling in Synaptics TouchPad software.

  Published driver update 12/14/2011 for technology Intel® Rapid Storage Technology

  Published 05/07/2012 updated driver for HP Bluetooth worm 6.5.0.2000, Synaptics TouchPad driver to ver 16.0.1.0, updated guide: how to install

  Driver HP Bluetooth Windows 7

• Windows 7 Upgrade Guide for dv2000 models

  Statement:

  You use this guide at your own risk. I take no responsibility for any problem.

  Things you need to know and do before the upgrade:

  1 HP may require that reinstall you Vista back if you have hardware problems to solve the.

  2 HP will not help you if you have software problems because these models do not have their support

  with Windows 7 system.

  3. before you upgrade to Windows 7 will make it please Vista Recovery CD/DVD. How all the information here.

  4. all drivers for Vista and preinstalled by HP software for your model are in the folder in C:\swsetup .

  If you still have on your HARD drive, then copy this folder on a CD/DVD. You may need them one day.

  5. users with AMD processors have indicated that their models dv2000 were very quickly overheated after installation

  Windows 7. So if you want to install this system and you have this processor to remember about this and be hypersensitive

  on this issue.

  How you can check your laptop CPU (processor), the GPU (graphics card), the motherboard or HARD drive temperature?

  To do this use HWMonitor (free and recommended) or Aida64.

  CherylG (one of the best HP forum contributors who has model dv2000) has solved this problem by installing Windows

  Updates.

  Resources:

  How to install Windows updates

  6 If your model has nVidia graphics card then please check how high temperature this device possesses under

  Vista. In this way you will know is it works fine under Windows 7 also.

  CHIPSET DRIVERS

  Solution on COPROCESSOR with yellow exclamation mark () 

  If you have Intel processor:

  Intel chipset (Install and reboot before other drivers) here (version 9.1.1.1025 for 32/64-bit Win7)

  Intel Rapid Storage Technology here (ver 10.1.2.1004 for 32/64-bit Win7) 

  If you have an AMD processor:

  nVidia Chipset (Install and reboot before other drivers) here (Vista)

  Important information for users with nVidia chipset!

  If you have 4 GB RAM or more, then read the article Microsoft Knowledge base on the solution of certain problems that you may have here.

  GRAPHICS DRIVERS

  Intel graphics:

  Inte l 950 and Intel X 3100 here (version 15.12.75.4.1930 for Win7 32 bit) or here (version 15.12.75.4.1930 for Win7 64 bit)

  nVidia Chart: 

  Important information!

  If you have installed all the drivers for graphics card nVidia, then before you install either version, you will need

  first of all to remove old drivers from your system. Check below how guide do (that's not standard

  ( uninstall process) :

  How to remove drivers Windows system nVidia graphics.

  Drivers:

  nVidia GeForce 8400 M GS:

  OPTION 1
  

  267.76 version here for Windows 7 32 bit or here for Windows 7 64-bit.

  OPTION 2

  Version 197.16 here for Windows 7 32 bit or here for Windows 7 64-bit.

  Note:

  Don't forget to first uninstall previous graphics driver.

  nVidia GeForce GO 6150 7150 M, 7200 M:

  OPTION 1

  First try installing the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  OPTION 2
  

  If the drivers will not work so try modded drivers worm 195.81.

  Note:

  Don't forget to first uninstall previous graphics driver.

  How to install Windows 7?

  1. download driver here (for 32-bit Win7) or here (for Win7 64 bit) double click and select extract,

  2 download from this site with the drivers also modified INF and replace original INF in extracted folder,.

  3 install and reboot.

  OPTION 3

  Last thing you can do is install graphic driver from Windows Update.

  Note:

  Don't forget to first uninstall previous graphics driver.

  1.open Windows Update by clicking on the button start , clicking on " all programs " and then clicking on '

  Windows Update '.

  2in the left pane, click " check for updates " and then wait while Windows searches the latest updates

  for your computer.

  3select the " optional updates " and install from there only driver for your graphics card.

  AUDIO DRIVERS

  Conexant HD Audio

  Use the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  MODEM DRIVERS

  Conexant Modem here (A worm 7.61.0.0) (Vista) - If you have the sound card Conexant

  HP QUICK PLAY 

  HP QuickPlay here (ver 3.7 v.6112 for 32/64-bit Win7)

  Notes:

  • It must be installed before HP Quick Launch Buttons.
  • You have installed this software and it crashes when you use?

  Uninstall your current version of HP QUICK PLAY and install what you had in Vista.

  Resources:

  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  If you've burned CD/DVD with C:\swsetup folder as proposed in the guide then you will find it.

  HP Quick Launch buttons

  Solution on KEYBOARD FILTER with yellow exclamation mark ()  

  HP Quick Launch buttons here (ver 6.50.13.1 for 32/64-bit Win7)

  WIRELESS DRIVERS

  Intel Wireless here (ver 13.0.0.107 for 32/64-bit Win7)

  Broadcom wireless here (ver 5.60.48.35 for 32/64-bit Win7)

  Atheros Wireless here (ver 8.0.0.316 for 32/64-bit Win7)

  HP wireless Assistant here (ver 3.50.12.1 for 32/64-bit Win7)

  Bluetooth wireless here (ver 6.5.0.2000 for 32/64-bit Win7) only for models with Bluetooth.

  Note:

  How to install the Bluetooth driver?

  Click on the link below:

  How to install the driver Bluetooth HP Windows 7.

  ETHERNET DRIVERS

  Marvell Yukon 88E8039 Lan here (ver 10.70.5.3 for 32/64-bit Win7) only for models with Intel processor.

  Models with AMD processors need not install any additional Ethernet file, because the drivers for it are in the chipset package.

  CARD READER

  Solution on BASE SYSTEM DEVICE with yellow exclamation mark () 

  Ricoh 5 - 1 card reader driver here (ver 6.10.01.03 for 32/64-bit Win7)

  TOUCHPAD DRIVER

  Synaptics TouchPad here (ver 16.0.1.0 for 32/64-bit Win7)

  Note:

  Default is activated the scroll two - finger. If you want to use a finger to scroll, check out the link below:

  How to change two - finger scrolling on One - Finger scrolling in Synaptics TouchPad software.

  Alps TouchPad

  Install driver through Windows Update:

  1.open Windows Update by clicking on the button start , clicking on " all programs " and then clicking on '

  Windows Update '.

  2in the left pane, click " check for updates " and then wait while Windows searches the latest updates

  for your computer.

  3select the " optional updates " and install from there only driver for Alps TouchPad.

  ONLY IF YOUR MODEL: WEBCAM 

  CyberLink YouCam here (ver 2.0.3115 for 32/64-bit Win7)

  Note:

  If you have a problem with your webcam, check below links to HP documents:

  Solve Webcam Windows problems

  Test a Webcam using your favorite Instant Messaging

  3VRX (optional software)
  

  on the screen the images and associated sounds that are displayed and heard when volume control

  3VRX here (version 2.5 for 32/64-bit Win7)

  Note:

  Here is YouTube video that shows what you can do with this software.

  ONLY IF YOUR MODEL HAS: FINGERPRINTS READER
  

  1. uninstall all software and previous fingerprint reader drivers

  Check below how guide (only it's non-standard uninstall process):

  How do I uninstall the driver and the AuthenTec fingerprint software

  2 you can install now correct fingeprint reader driver and software.

  There are two apps that are available on this device:

  - AuthenTec TrueSuite

  and

  -DigitalPersona Personal (recommended).

  Information on how to install the software you will find below guides:

  AuthenTec TrueSuite, fingerprint AuthenTec and Windows 7

  DigitalPersona Personal fingerprint AuthenTec and Windows 7

  ONLY IF YOUR MODEL: DVD PLAYER WITH LIGHTSCRIBE

  How can you check is your DVD with Lightscribe drive?

  The Panel of DVD, there will be a Lightscribe logo.

  

  LightScribe Host software here (ver 1.18.22.2 for 32/64-bit Win7)

  Report of the changes that have been made in the guide

  Edited the 16/01/2010 updated Synaptics TouchPad driver to ver 14.0.3.1, update Broadcom driver to ver 5.60.18.41

  Edited the 18/01/2010 updated nVidia Graphic article. Adding drivers for nVidia GeForce 8400 M GS (version 195.62)

  Published the 19/01/2010 updated LightScribe software 1.18.10.2 worm host

  Edited drivers fingerprints of 02/05/2010 update, software and added guides to fingerprints.

  Published the 2010-02-27 updated LightScribe Host at worm 1.18.11.1 software

  Published the 03/03/2010 update HP Quick Launch Buttons to worm 6.50.13.1

  Published the 03/20/2010 updated Synaptics TouchPad to worm 15.0.9.0 (this version allows multitouch gestures)

  Published two guides added 21/03/2010. How to remove drivers Windows system nVidia graphics and how to install the HP Bluetooth driver in

  Windows 7.

  Published the 03/25/2010 updated LightScribe Host at worm 1.18.12.1 software

  Changed name Intel Matrix Storage Manager published 26/03/2010 to the Intel Rapid Storage Technology technology, has added Intel Rapid Storage Technology

  worm 9.6.0.1014

  Graphic editing section of 31/03/2010 update nVidia with uninstall guide, updated drivers for nVidia GeForce 8400 M GS to worm 197.16

  Published the 04/10/2010 updated LightScribe Host at worm 1.18.13.1 software

  Published the 05/04/2010 updated LightScribe Host at worm 1.18.14.1 software

  Published the 05/05/2010 updated Synaptics TouchPad driver to ver 15.0.13.0, updated HP QuickPlay for ver 3.7 v.6112

  Published 21/05/2010 Update for ver 5.60.48.35 Bradcom, Atheros wireless to worm 8.0.0.316 update, update Synaptics touchpad wireless

  15.0.13.3 worm

  Edited the 24/05/2010 update HP Wireless Assistant to worm 3.50.11.2

  Published 24/06/2010 updated published 14/12/2011 updated Intel® Rapid Storage Technology driver

  Published 30/07/2010 update Broadcom wireless - the same version but with a few improvements, HP Wireless Assistant updated to ver 3.50.12.1

  Drivers added edited 04/01/2011 for nVidia GeForce 8400 M GS (ver. 267.76)

  Published the 04/02/2011 update software LightScribe Host at worm 1.18.22.2, added a guide: how to change two - finger scrolling on One - Finger

  Scrolling in Synaptics TouchPad software.

  Published driver update 12/14/2011 for technology Intel® Rapid Storage Technology

  Published 05/07/2012 updated driver for HP Bluetooth worm 6.5.0.2000, Synaptics TouchPad driver to ver 16.0.1.0, updated guide: how to install

  Driver HP Bluetooth Windows 7

• Inspiron 570 ultimate 'Uber' Upgrade Guide including Overclocking

  After seeing several users asking for help on this topic and to lose contact with the users, I decided it's time to gather all the information and make it as enjoyable as possible. When the project is completed, I will state here duly filled (it will take me some time to put together it). For now, it is

  WORK IN PROGRESS

  Little warning first to users who still hold any type of guarantee for their Inspiron. Upgrade the HARD drive (HDD), RAM (memory) and the installation of video card would not void your warranty, PSU (Power Supply Unit) could be questionable. Dell does not generally recommend change CPU (processors) [as soon as you think about changing your motherboard, your PC is therefore more Dell, unless she card mother Dell from another model, but then it's Frankenstein, in this case you can get help in the forum of harware Tom, but not here], however I would like to present the list of tested processors Dell and there will be another 2 processors not tested by Dell. In addition, you can change the case of do your prettiest Inspiron or to improve cooling, I would say - it could void the warranty as well. Finally, at the end, I would like to talk about overclocking, it would be just not the cancellation of guarantees, it puts you at my mercy, because I'm the only one left who did this and always ready to help others, remember, as soon as you decide to go this way, you could a danger to PC - it might even ignite and burn your place , so basically you do so at your own risk. I'm thinking, if you overclock Inspiron 570 you agree with the above possibilities and would not hold the grudge (or hold responsible) against me or any other Member of this forum if you become homeless because of the fire caused by overclocking, LOL.

  I'll start with the regions less invasive and easier to the more difficult and dangerous.

  The guide consists of the following

  Part 1. Upgrade of RAM.

  Part 2. Video card update.

  Part 3. POWER supply upgrade

  Part 4. Upgrade the processor (CPU)

  Part 5. Cooling of the processor and a general cooling in the original case.

  Part 6. Cooling of the processor and a general cooling in the larger case.

  Part 7. Overclocking.

  If I missed something I go back and fix it, I would try to keep it all in one thread. When I consider the complete Guide, then I would say.

  First things first - information. All the Inspiron 570 manualand next page easy to download driver Driver download page not so easy.

  Before asking questions, than I guess you read the corresponding manuals, so I must not explain, for example, how to open your case, well I hope you understand what I mean.

  Part 1. Upgrade of RAM.

  According to the manuals official Dell Inspiron 570 is limited to 8 GB memory 1333 MHz maximum, but it was found that 16 GB 1333 MHz is recognized, faster RAM would have slowed at 1333 MHz. So far, no one has complained that their RAM (manufacturers) were not recognized by Dell. In general, it is recommended to use Crucial, however, I used Corsair and have not noticed any problems. Also, try to avoid the large heat spreaders, especially if you intend to use the fan Tower configuration push - pull - push fan can block access to the nearest slots of RAM CPU cooler.

  I would try to explain.

  Unfortunately, this is the only photo where you can see the situation.

  

  This is the pattern with the same color RAM code.

  

  4 DIMM 1 - could probably be affected by large CPU Cooler

  5 DIMM 2 - can be affected by the large CPU Cooler

  6 DIMM 3 - will not be affected by the large CPU Cooler

  7 DIMM 4 - will not be affected by the large CPU Cooler

  This info is from the Manual

  Recommended memory configuration

  Model	One module	Two modules	Three modules	Four modules
  570	DIMM4	DIMM4 DIMM3	DIMM4 DIMM3 DIMM2	DIMM4 DIMM3 DIMM2 DIMM1

  Part 2. Video card update.

  If you know, our Inspiron has only 300 watt PSU, so without changing the highest supply updated Sapphire video card (recommend) 7750, or cheaper and somewhat less powerful version is 6670, for anything beyond what you should have to upgrade your power supply.

  Some people have asked if the graphics card and RAM slots would be "intercept", the answer is no. However, to change or add RAM, video card must be removed to allow RAM Jack clamps open, this is approximate photo below, the maximum length of the map is approximately 12 inches or 30 cm, in this case video card would go under HARD drive so you should measure top set.

  

  Watch you 2 SATA slots beside the Video card - they could be covered by the Vcard radiator, if this is the case you should use angle sata cables.

  

  I realized that I did not cover a lot of cards video here. So a little more. "" As see you I placed 550 MSI TI Cyclone OC for its unique cooling ability, this map is very large, but short, measurements are "x (H)" x (W) (L) ', 8.27 "x 5.51" x 1.38 ". I'll add more cards here as users will report.

  XFX Double D FX - 787 a SADC Radeon HD 7870 GHz Edition 2 GB 256 - bit GDDR5 PCI Express 3.0 x 16 HDCP Ready CrossFireX Support video card 9.5 "x 4.4" x 1.5 ". "

  Part 3. Update on power supply.

  This is a general guide for power supply recommended by MSI, I would add at least 50 watt to your final decision, however more better, some say 100 watts is very good idea, argues here. Any standard power supply fits inside (it may be little required some metal parts of the case folding, but nothing major). Just make sure that a new block of POWER 24 pin or 20 + 4 pin, MOBO (motherboard) main power connector plus 4 connector pins supply assistants, 4 cables SATA power and at least a 6-pin PSU video card. It may be modular or not. Modular are much more expensive, regular, you'd have to improvise cables underground of the road maintenance.

  Here are some pictures of the regular POWER supply, so you see that cable management can be a headache.

  

  

  To my knowledge the factory recommended PSU is XFX, OCZ, Seasonic, Enermax and Corsair, I see so many complains of Thermaltake and Antec. Store brands and surprisingly cheap PSU should be avoided if you want stability and assurance that nothing will burn or power supply will last long with the same characteristics over time.

  Then, I used extreme PSU calculator to show that our standard power can support 7750 and Phenom 965 together, no PSU upgrade needed, if no overclock.

  Type of system:		1 physical CPU
  Motherboard:		Regular - Desktop
  CPU Socket:		Socket AM3
  CPU:		AMD Phenom II X 4 965 3400 MHz Deneb C3
  Use of CPU utilization (TDP):		90% TDP
  RAM:		2 sticks DDR2 SDRAM

  Video card 1:		AMD Radeon HD 7750
  Regular SATA:		2 hard drives

  DVD - RW / DVD + RW Drive:		1 disc

  USB:		4 devices

  Fans
  Regular:		2 92mm fans;
  LED:		1 fan 92mm;

  Keyboard and mouse:		Yes
  The system load:		90%
  Minimum POWER supply power consumption:		252 watts
  Recommended power:		302 watts

  Inspiron 570 stock PSU is 300 watts and it is known that this number is somewhat underestimated, so 302 watt is okay. Now, the power supply was in my Inspiron 570 model was HIPRO HP-P3017F3, here are the specs for anyone to chew.

  + 5V = 22 a, + 12 v = 5V aux, 18 a, + 3.3V = 17 a = 2A, - 12V = 0. 8A; Special comment "+ 5V and + 3.3V do MUST NOT EXCEED 160 W.

  If you need a replacement, you can get it here again for $ 38. Not exactly the same, but very similar.

  Tyswhat

  Can I overclock the AMD Athlon II X 2 250 processor with the motherboard stock stock? Or it doesn't work?

  Only the Black Edition processors, unfortunately (already). Yours is not the case.

• EQL / VSM / MEM / vSphere upgrade order

  Hello

  I see now that v8, MEM 1.3 EQL and VSM 4.5 have been released as EPA so I can upgrade to vSphere 6!

  Is there an order of upgrade recommended for all of these components?  I guess EQL v8 first, then the environment vSphere, then MEM, then VSM?

  I think I read THAT MEM 1.2 was not compatible with vSphere 6?  If this is the case, I guess I have to switch to the RR before upgrading vSphere and then apply 1.3 MEM?

  Thanks in advance!

  Hello

  I agree first of all of the firmware on board.  Remove the MEM, then upgrade vSphere Server v6 then ESXi nodes to v6.0.  You can do MEM or VSM in order any at that time.

  Kind regards

  Don

• Upgrade Guide vWorkspace 8.0

  Hi all

  Is there a guide for this? I can only find information on the upgrade 7.0 and 7.2?

  Thank you

  Hello

  Indeed, there is a guide on the Support site, currently under the recommended content section. Here is a link direct https://support.quest.com/SolutionDetail.aspx?id=SOL106284&pr=vWorkspace

  It may be useful

  David

• vSAN/vSphere upgrade 6 - 6U1

  Hello

  Recently, I have invested in vSAN and have a cluster 3 running on to Dell R720xd (vSphere Essentials with no DRS). I want to upgrade vSphere Update 1 6 and want to make sure I don't break anything as vCenter and Update Manager are both running in the cluster vSAN. My current plan is:

  1. Upgrade VCSA
  2. vMotion virtual machines off-host 1
  3. Put the host 1 in maintenance mode (ensure this accessibility mode)
  4. Clean up the host 1 - Reboot
  5. Take the host out of maintenance mode 1
  6. Return original VMs host 1 host 1
  7. vMotion virtual machines off-host 2
  8. Put host 2 in maintenance mode (ensure this accessibility mode)

  and so on

  This do the job and make sure that nothing bad happens to vSAN and be the least hassle? VSAN will automatically be on 6.1 once the definitive host is upgraded? I'm more that happy to have full downtime and power all virtual machines down if it minimises the risk of another host goes down while the 1 host is in maintenance mode, but of course only plan to have each host in maintenance mode for the duration of the updates and no more.

  Any advice would be greatly appreciated

  I think you have it right.  I probably wouldn't shut down all virtual machines during the upgrade, I would do this upgrade spread, as you have outlined.

  As far as I know, you'll be on vSAN 6.1 with the upgrade of the host.  It is however, and upgrade to the file system.  It should be a few clicks away in the Web user interface.

  From the release notes, VMware Virtual SAN 6.1 Release Notes: new format on disk. Virtual SAN 6.1 supports upgrades to the new file format virtual disk 2.0 via the Web Client vSphere. This file system based on the newspaper, based on technology Virsto offer highly scalable clone and snapshot management support cluster virtual SAN.

  Thank you, Zach.

• Issue of license associated with vSphere upgrade from 5.5 to 6

  I want to improve my environment to vSphere 5.5 to 6.

  I have several ESXi servers and 1 vCenter server. Some servers ESXi serving direct environment and a test environment.

  I want to upgrade, step by step so, install the new server vSephere and upgrade test environment 6.0 ESXi servers. and then run a few days test environment.

  Upgrade needs, I need to convert the license keys to 6.0.

  Can I run then simultaneously the two environemts two or three days? (living environment using license keys 5.5 and 6.0 keys environment converted from 5.5 test keys)?

  Some key ESXi are used in several ESXi is used according to CPU sockets associated with these keys.

  Believe me, it does not, it may seem, but you pile up errors for later.   It would be a better option to generate a vCenter 6 in eval mode and go that route.

• Y at - it no downtime of ESxi hosts with vsphere upgrade 5.0 to 5.1?

  During the upgrade process after asked the OSP and the inventory service, there is a point where vsphere agent must be installed on Esxi hosts. There is an automatic and a manual option. Will be the hosts be restarted if I select the automatic option?

  Thank you

  obj1 wrote:

  During the upgrade process after asked the OSP and the inventory service, there is a point where vsphere agent must be installed on Esxi hosts. There is an automatic and a manual option. Will be the hosts be restarted if I select the automatic option?

  Thank you

  The upgrade of the agent vSphere is transparent.

  You can lose the remote management of vCenter for a short period, but the virtual machines on that host will work without interruption.

• vSphere Upgrade without interruption

  Hello

  This is the scenario:

  10 5.0 ESXi hypervisor (free edition) with local storage

  All virtual machines must be available 24/7

  What I do:

  Upgrade to a paid version (std)

  Upgrade to 5.1

  Present a shared storage and virtual machines move it

  Install a server vCenter Server and add all hosts that he

  Suggestions for making the part "upgrade" without interruption for virtual machines? Then I just move them using storage available in 5.1 vSphere vmotion std.

  I can think of a way to do this, but I'd like to hear other members of VMware communities

  Thanks in advance!

  elgreco81

  In this case I'll use just key in the trial installation and migration, ultimately it's what you would do when he was a new environment, I do not think that VMware will be too picky about...