vSphere vCenter 5.0 5.1 connection

Similar Questions

• Error created another Console service, unable to connect to the host by vSphere vCenter

  After creating an another Service Console unable to connect to the host by vSphere vCenter. How can I remove the now Service Console or make the old one further work well?

  Thank you.

  George

  This KB will show you the steps to re-create the Service Console, but you'll need to console or ILO access to the ESX host.

  http://KB.VMware.com/kb/1000266

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  Twitter: http://twitter.com/mittim12

• I need some help please (I can not log in via customer web Vsphere Vcenter)

  Dear professionals

  as you can see in the photos attached, I can not connect on the web client via Vsphere vcenter server.

  should I use same ([email protected]) username and password that I used for SSO?

  I don't know exactly what username and password should I use.

  Please help me because I blocked at this point.

  Thank you very much

  naoufl

  Hello

  I can see on the screenshot that you misspelled the username administrator as Administratore, how ever the default Super powers are

  username: [email protected]

  Paswweord: master password of the SSO.

  Thank you

  Avinash

• vSphere Client 5 U1 unable to connect to the host of U1 ESXi 4.1

  Hello

  I'm having a small problem.

  I am currently using vSphere Client 5 U1 (5.0.0 Build 623373) to connect directly to ESXi hosts (still no vCenter).

  I can connect successfully to 5.0 U1 hosts, but I have a few hosts U1 4.1 inherited in the lab which I just can't connect with.

  A little research in the compatibility tables show that with the most recent client, I should be able to connect do former ESXi hosts.

  However, when I try to connect to this host U1 4.1, I get a popup to update with the message "customer support required files must be extracted from the 'vsphereclient.vmware.com' server and installed". And then I get a prompt to install/save a Setup program.

  What is this new installer? Another version of the Client? Have I not the newest one? Anyway, I can't complete the download for this new installer (connection failure).

  The host of ESXi 4.1 is on the network and I can connect with an older Client (4.1) that is installed in a different workstation.

  What happens here?

  Thanks in advance!

  You must install as vSphere client major versions (3, 4, 5) but VMware tries to make this process as transparent as possible. That's why it asks to install it automatically.

  Once installed, just launch v5 and it automatically and transparently pass the correct version if you connect to a 4.x server.

• vSphere/vCenter client and web services

  Hello

  Don't vSphere client (or client to vCenter earlier) invoke web services of vSphere internally to perform operations on the ESX Server?

  I'm new to VMware developemnt.

  As I understand it, it's the client vSphere or vCenter is a management console. An actioan/operations such as create VMS or cloning images actually occur on the ESX servers or hosts. Web services are hosted on the ESX servers. When we perform an action via client vSphere/vCenter (e.g. create the VM), internally, it would be invoking appropriate API provided by the web service SDKto do you need.

  My understanding is correct?

  If you connect to vCenter or ESX host (i) themselves by using the Client vSphere, the majority of applications using vSphere API... I say majority because I do not know there are undocumented more that VMware uses behind the scenes, but in general, it is true. If you perform an operation in vCenter and it applies to a host, vCenter will communicate this request to the host.

  If you're new to QALY/SDK: you can spend the time to enter the section "Learning" of the developer forums, there is lots of useful information here: http://communities.vmware.com/community/developer/learn

  Here's a great doc Getting Started with vSphere SDK - Update for SDK 4.1 release that has a lot of information/explanations on how it all works, you should spend time passing on it and then ask questions in the appropriate follow-up, if you need more detailed explanation.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  Twitter: @lamw

  If you find this information useful, please give points to "correct" or "useful".

• Qual a difference between vmware vsphere, vcenter, workstation?

  OLA pessoal,

  Nunca trabalhei e com VMWare estou com doubt no deferred than tools vsphere, vcenter, workstation.

  Preciso testar uma Solução virtualizacao. Vou rodar dentro Windows 10, where seja, NAO preciso UM hypervisor rodando no como Hyper-V server hardware.

  So one size rodando no Windows para testar Doi servidores com some specific management.

  Me cadastrei no site da VMWare para testar a versão trial, mas não sei qual software download.

  ATT, Fabio

  Para sua need you can use o VMware Workstation or VMware Player o.

  Sober as diferencas, o VMware Workstation e uma Solução virtualizacao type-2, or seja, roda em cima of some system operational, alem do VMware Workstation we have outros exemplos como o VirtualBox e o Microsoft VirtualPC antigo.

  JA o VMware vSphere, ESXi e uma Solução virtualizacao do Tipo-1, or seja, roda diretamente em cima material, e por isso some vezes e re-usable chamado, e alem vSphere, ESXi, Microsoft Hyper-V and Citrix XenServer o o we have.

  Por ultimo, o VMware vCenter Server nada but as UM software para os servidores com VMware vSphere, ESXi gerencia.

• Find this vCenter/s that you are connected to?

  Y at - it a command to run in powercli which will tell you what vCenter or vCenters you are connected to?

  I tried Get-VIServer and Get - VC, or work...

  Hello, 0.justinsmith-

  You can take a look at the auto variable, ' $global: DefaultVIServers ' - that he holds the VIServerImpl objects that correspond to the vCenter - and the host ESX (i) that you are currenty connected.

  If you are interested in having your vCenters information currently logged into the title bar of your PowerShell session (the default behavior in the previous PowerCLI releases), there are several places out there that have some functions/how-tos for this.  For example, AC has written on it to vNugglets.com in his position of PowerCLI, vCenter servers show currently connected .

  Enjoy

• Support for multiple instances of vSphere vCenter

  I installed the demo of (construction 4.4.0 - EE #1509 - July 28, 2010 - Release Build) Hyperic 4.4 company Web site to test the support of monitoring VMware vSphere 4.0.
  
  I have installed an agent Win32 on W2003 server which hosts the 4.0U2 of vSphere vCenter server and configured it. Once resources have been configured, I edited the VMware vCenter resource to add a user/password valid and after a short while the ESXi host servers and virtual machines appeared in the vSphere browse/HQ screen. Everything works well.
  
  I then tried to add a different vCenter server with its own ESXi host servers (with a new agent installed on W2003 this server) and that's where the problem starts. After that I added the name of user and password in the detail of the vCenter inventory, new ESXi and VM guests begin to appear under "recently added". When I go to the screen of vSphere browse/HQ original vCenter disappeared and a mixture of the other vCenter servers host and its own host servers appear under the vCenter newly added.
  
  I would be able to monitor the 2 different vCenter servers?

  Multiple vcenter instances are supported.  When you configure the resource, be sure to use the IP address of the box instead of the default loop address.  When HQ sees multiple vcenters air-conditioned and come with 127.0.0.1 in the URL of SDK, it blends.  Configuring IP should solve the problem you are experiencing.

• How to make backups without vSphere/vCenter

  We are one of the companies at low prices that only use ESX, cannot get them to buy me vSphere/vCenter again.

  Not much, we have only 8 physical hosts, so I can manage it with the vSphere Client a host at a time.

  Is there a smart way to make level vm backups in my situation?  I can export OVFs manually, or copy the files from the virtual machine to a store in offline mode, but these two need to cull the virtual machine. (you cannot copy or move a machine virtual everything in its place)

  Is there a way (with vCLI or powerCLI) to maybe make a snapshot, move the snapshot offline, and then delete the original... or something like that?

  I'm really just looking for a smart way to make level vm backups that don't require bringning to the bottom of the virtual machine, and that perhaps I could automate with a script so its more of a real-time continuous data protection.

  Already did you look in the scripts of lamw ghettoVCB?

  http://www.virtuallyghetto.com/2010/07/script-updated-ghettoVCB-and.html

  André

• Interoperabilidade between VSphere Vcenter e

  BOM dia pessoal,

  Tenho um ambiente com o Vcenter vmware 4.1 e 4 hosts com ESXi 4.1 (Cluster HA com enable), um URM hosts e uma outra team nao quer o POIS não quer see vcenter using other vms Além das dele.

  Dei an o VSphere visualizando o only use option welcome dele, o problema e quando ele remove uma VM pelo VSphere VM continuum without orfa como Vcenter.

  Is uma'm dessa remocao ser feita pelo e Vsphere Vcenter nao ficar «reclamando» o

  only the complete para, is that manual fala esse sober permissoes do vcenter. http://www.VMware.com/PDF/vi3_vc_roles.PDF

• vSphere vCenter - vCenter 4.0 Update 1 resolution VM issues slow because the disk i/o latency?

  vSphere vCenter - vCenter 4.0 Update 1 resolution VM issues slow because the disk i/o latency?

  My client is slow VM problems that appear to be disk I/O latency on Hitachi storage 1000. I heard in VMware meetings vCenter 4.0 Update 1 solves these problems... without any explanation as to why.

  Rumor is that "after working all the angles of the slowness of the virtual machine including vmtools hardware version, latency of storage, etc. called VMware support and advised to get vCenter to U1 to solve the 'known problem' VM performance issues." "U1 fact and problem solved.

  It is VMware User meeting and I have no other details.

  Customer did not of U1 and having problems of slowness VM believes may be due to the assets/Hitachi 1000 s and favorite paths questions (known to cause problems). Preferred fixed pathing but questions continue.

  My limited participation in the issue of troubleshooting in the date limit information available now. It is just an issue if 'known problem' exists and is known to be resolved via U1 vCenter or ESX 4.0 U1?

  Not vCenter 4.0 Update 1 solve disk i/o latency issues considered the slow pace of the vm? Why?

  All points will be awarded.

  that strike!  You can use round robin or MRU for active/passive.

• What management software is free with ESXi 4.0?  (re: vSphere, vCenter, etc.)

  I'm new and VMware ESXi, but I'm learning and I'd like to better understand the different management products available.

  I installed the free ESXi 4.0, so what software is available?  (free)

  (1) I can't download "vSphere Client" directly from my ESXi host.  Is this different than 'vSphere' from the VMware Web site?

  (2) what is the difference between vSphere and vSphere Remote Command Line Client?

  (3) I have free access to vSphere vCenter?  This is only used to manage multiple ESXi hosts at the same time?

  Thanks much for any help!

  One of the most interesting free tools from VMware is in my view VMware vSphere PowerCLI.

  vSphere 4 is a suite of products. vSphere client is a product of this suite.

  The host update is a utility that allows you to upgrade a vSphere (ESX or ESXi server) from one version to the other host. You don't need this if you start with the last update of the ESXi 4.0 version 2.

• VI3 environment with vSphere vCenter management?

  I could manage my VI3 environment with vSphere vCenter?

  I could add a Cluster VI3 to vSphere vCenter?

  Hi, Yes, you can, but you must install a license server and configure it with the .lic file to manage the licenses for ESX3.5

  Then, in Vcenter, go to Vcenter server settings, licenses and configure the license server location.

• How can I get the VM of vSphere vCenter?

  I use vSphere 6.0 Update 1 b, and PowerCLI 6.0 Update 2

  I need to move my VM vCenter to a new data store.  The only thing I don't know is the name of the vCenter VM VM (this may change).

  I have the VI server object for my vCenter Server, which is returned from the connect-VIServer cmdlet

  Is there a way I can use the VI server object to get the VM vCenter, or is it possible to ask all virtual machines which is a vCenter?

  Appreciate any guidance.

  Maureen

  Thanks for the help, that's what I did.

  $vctObj = to connect-viServer $vctIPAddress

  $vmList = get-vm-Server $vctObj

  $vctVMObj = $vmList | {When | $_.guest.} {IPAddress-match $vctObj.Name}

  Thanks for the help.

• How to determine the instance for a given entity vSphere vCenter

  I often need to generate output or act on entities in vSphere (VM, vSphere clusters, clusters of DTS, etc.) on multiple vCenter instances. I can easily run scripts that will iterate through all the virtual machines after connecting to multiple vCenter instances using Connect-VIServer.  I could not find anything in search of he from Get-Member output. As a result of the way Parent property recursive (show the parent object of get-view-ViewType HostSystem) does not lead on behalf of the vCenter bifurcation. I want to know is if there is a way to determine what bifurcation of vCenter manages a particular entity.

  OR

  It's a situation where it is not possible to determine the instance of vCenter, but rather the script must iterate $global: defaultviservers and use the server setting?

  Try like this (I only show during a VMHost, but most of the other object must offer the same possibility).

  .Net object #.

  $esx = get-VMHost-name MyEsx

  $esx. Uid.Split(':') [0]. Split('@') [1]

  vSphere object #.

  $esx = get-view ViewType - HostSystem-filter @{'name '=' MyEsx'}

  $esx. Client.ServiceUrl.Split('/') [2]