W510 - error HARD drive, gambling problems, calibration of the questions

Similar Questions

• 03F1 error hard drive at startup

  Hello guys

  Yesterday my friends and I were watching a movie on my laptop via a projector and all of a sudden it freezes, I've tried a few things (Im not completely reduced tech = P) but could not release it so I had to scramble the power button to turn it off and now everytime I restart it it gives me a screen front harddrive error screen (where the little colored balls dance and make the logo of the) window) to boot windows 7. He tells me the error is the number "03F1" and asks me to run the diagnostic, but every time I run it is stuck at 0% (I waited about 35 minutes, did not move a single percentage). After a few times, I just ignored the message and left without running diagnostic tests and my computer booted up fine... it doesn't seem to be a mistake.

  HP disk hard diagnosis is therefore out of the question, I went to run a few others offered by windows, the online version of the hard drive diagnosis and the results were very good... nothing seems to be tested in my hard drive and my computer is running without problems. However whenever I start I have to deal with this stupid screen and hitting a few keys for my pc at startup (I tried the diagnostic hard drive in the BIOs, it gets stuck at 00 as well for some reason any).

  Any ideas? I came across this post on the internet which is almost exactly the same as mine, I really want to get rid of this stupid screen if I do not have a hard drive failure... I mean that my laptop is like only 1 year.

  Any help is greatly appreciated!

  Good day
  Derg

  Hello

  Ignore my last post

  The hard drive on the link below would be a good replacement.

  1 Tb hard - computer laptop

  The process of replacing the hard drive is detailed from Page 48 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive.

  If you do not have your recovery discs, try the link below to see if you can order a replacement.

  http://support.HP.com/us-en/document/c00810334

  If you have a problem with the link above, order them directly from HP here.

  Kind regards

  DP - K

• No matter how much hard drive space or size is not displayed. It says hard drive is not accessible and the cyclic redundancy error.

  * Original title: hard drive problem

  No matter how much hard drive space or size is not displayed. It says hard drive is not accessible and the cyclic redundancy error. When I try to format it, it says windows could not finish.

  What just happened? How can I solve this problem?

  It says hard drive is not accessible and the cyclic redundancy error. How can I solve this problem?

  Sorry, you can not. A CRC error means that there is a serious problem with your drive. You need to replace it.

• TouchSmart 300 Windows 7, re - install on hard drive replacement problem. Help!

  I have official restore for my Touchsmart 300 disks and try to get it back on a hard drive, which I took from another machine. Drive hard said have left include Win 7 and Win XP. When I try to boot from the recovery CD, I am taken to the old hard drive Artemision boot menu, not the installation of the recovery disc. If I continue on this path there, I get an error message and a suggestion from my hard drive is damaged. Repair disk option can fix anything. Recovery Console doesn't help either. Why the CD read and overwrite all the old stuff on the hard drive?

  It is a good idea.

  They can have tools or diagnostic we individuals have no which can isolate the cause.

• The discs to a hard drive with an IO error can be removed and placed in a good hard drive to try to recover the information about the bad drive?

  The discs to a hard drive with an IO error can be removed and placed in a good hard drive to try to recover the information about the bad drive?  Both units are of the same type and speed.  both are records hard internal seagate w double disc in the drives

  On Thu, 20 Sep 2012 14:41:30 + 0000, Stephen_403 wrote:

  The discs to a hard drive with an IO error can be removed and placed in a good hard drive to try to recover the information about the bad drive?  Both units are of the same type and speed.  both are records hard internal seagate w double disc in the drives

  No, at least not by us.

  Open a hard drive for some reason any at all can be done in special
  laboratory as parameters. Something else will destroy the disk.

  There are companies trying to recover data from broken disks,
  and they are sometimes successful. And who knows, maybe they
  sometimes use methods such as what you describe.

  But if you plan to use such a company, know what they
  are all very expensive. It does not for most people.

  For the future, if you have files you want to be sure are not
  lost, make sure to have in place a backup procedure on a regular basis the
  external media player.

  Ken Blake, Microsoft MVP

• USB external hard drive recognition problem

  I recently copied a large number of music files FLAC from a NAS drive to an external hard drive. When I plug the hard drive into the USB port on my computer, it is not recognized or appear in the screen 'computer '. Instead, I have an icon in taskbar icon (bottom right of the screen) and when I fly over it says "safely remove hardware and eject the media.

  Please, what this mean and is there a problem with my external hard drive

  Thank you very much

  John

  Start the disk with the connected player manager.

  In the lower panel, check disks and look at the left panel. It must indicate the status of the disc attached. If shown as a foreigner do a right click and "import foreign disks".

  This does not affect the data on the disk and not the alternative option of having to write a signature to the disk. You may also define a drive letter in the right side, until a drive has a letter, you can't see its contents.

• I have a problem in my hard drive, it shows me in the properties I have more space than in the computer

  Hi Microsoft community
  I have a problem in my hard drive, it shows me in the properties I have more space than in the computer
  How is it possible that? Where is the rest area?
  same question under the D; disc
  http://www12.0ZZ0.com/2013/09/22/16/490351854.PNG

  

  Kind regards.

  Hi Microsoft community

  I have a problem in my hard drive, it shows me in the properties I have more space than in the computer

  How is it possible that? Where is the rest area?

  same question under the D; disc

  http://www12.0ZZ0.com/2013/09/22/16/490351854.PNG

  

  Kind regards.

  Both say the same thing - 120 GB of free space. 128 886, 263, 552 bytes is 120 GB and 128 GB not

  All hard drive manufacturers qualify 1 GB 1,000,000,000 bytes, while the rest of the computer, including the windows world, defines it as the 2 to the 30th power bytes (1 073 741 824). So, for example, a disk of 320 billion bytes is actually around 300 GB.

  Of some note as the official international standard
  sets the 'G' of GB as 1 billion, not 1 073 741 824. OK, even though they were, using the binary value of GB is so well-established in the world of computing that I consider be misleading on the part of the manufacturer of marketing using the decimal value of 1 billion.

• Inspiron 1150 hard drive install problem

  installed new hard drive (160 GB seagate) after the recovery of data on disk in Terminal.

  trying to reinstall xp home but get "no boot sector on hard drive - no bootable device.

  -changed the boot on cd/dvd order

  -have you tried dell reinstall disk

  -have you tried the XP disc

  -have you tried ubuntu live cd

  cd/dvd drive spin up and worked before HD failed

  am I missing something?

  
  

• Hard drive is not reflected in the list of disks

  Device Manager recognizes a disk but the disk management does not show in the list of disks (affected/not allocated).  You want to set up and assign a drive letter.   Thank you.   Russ

  < original="" title:="" disk="" management="">

  Hello Russell,

  Thanks for posting your query on the Microsoft Community.

  With the publication of the description, I understand that the hard drive is not reflected in the list of disks on your Windows 7 operating system. I will certainly help you get this problem.

  This problem can occur because of incorrect settings. In order to solve the problem, I would suggest trying the following methods and check if this is useful:

  Method 1: Troubleshooting hardware and devices

  Integrated the hardware and devices troubleshooter can automatically detect and fix most of the incorrect settings and errors that could cause problems with the equipment. I suggest you run the troubleshooter to check if there is no problem with the graphics card. See albums as follows:

  1. open Control Panel

  2. click Troubleshooting and select the option to display all on the left pane.

  3. click Troubleshooting of hardware and devices and follow the prompts.

  Try Method 2, if the problem persists

  Method 2: Make sure that the drive is enabled

  Follow the below mentioned steps to make sure that the drive is enabled:

  1. click on start and type device manager in the search box

  2. click on Device Manager in the control panel list

  3 locate the drives item in the list, and then click the small arrow to the right to expand the list of readers

  If a disk is disabled you will see an icon with an arrow pointing down on the icon of the hard disk

  If you see an icon with an arrow pointing down on the hard drive icon, double-click the icon and click on the button Activate peripheral

  4 then click on activate a device dialog box, click Next, and then click on finish

  5. click Close, and then close the Device Manager window

  Note: If you do not see your hard drive in the listed readers, the player is not detected by Windows.

  Note: If you receive an error message when the hard disk is activated, you can have a bad hard drive.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Replaced the HARD drive, but can not reinstall the operating system

  Evening,

  I replaced the HARD drive on my laptop and used the sony recovery media kit, but the error message "can not configure windows to run on this hardware of computers.

  The HARD drive is a Toshiba of the same style and size. Sony sent me two sets of disks, I replaced the HARD drive twice still have exactly the same problem.

  Any ideas before using it as a target would be useful.

  Thank you

  C

  It is possible that the new hard drive, you bought are 4 k sectors and not 512 KB, which is necessary to make it work properly.  If you have a practical clean Windows installation disc that give a try and see if you encounter the same error...

• HARD drive is not recognized on the Satellite 2800 200

  Hello

  First of all, I'm Dutch so I hope that I do not have too many mistakes in my English writing.

  I bought a 2800-200 Satellite at a friend's House. This laptop has a problem.
  When it is started is says "insert the disk in the drive system. Press a key when readya?.

  My bios is ACPI BIOS version 1.80
  In Pheripheral in Bios it says disc hard = not used Mode.

  On page two discs i/o: HARD drive: no drive.

  I tried two hard drives and the two were not working and not recognized in the BIOS.
  I have no CD of restoration.

  My questions:

  What kind of central computer has this laptop?
  Can someone help me with the recovery CD?
  What can I do to fix this?
  How can I change my BIOS so that the HARD drive is recognized?

  My hard drive is MK2023GAS and is not broken. There is nothing on this HARD drive.
  But also with the disk hard 10 GB of origin, I had the same problem.

  I hope you can help me and once again I apologize for my English.

  Hello

  I'll try to help you my friend.

  > When it is started is says "insert the disk in the drive system. Press any key when ready
  This message appeared on my laptop after the HARD disk is dead.
  I had to replace the HARD drive and reinstall the operating system.

  I guess that it of the same problem with your laptop. The HARD drive is not present or not recognized, and you will need to install a compatible HDD for the operation of the OS.

  I have google a bit and discovered that this laptop comes with the 10 GB HARD MK1016GAP of Toshiba drive. It supports the interface ATA-2/ATA-3/ATA-4/ATA-5.

  Please note that many BIOS have a limit of size of HARD drive. This means that not all HARD drive sizes are supported! I assume a 20 GB should be compatible, but this is just my own opinion
  > How can I change my BIOS so that the HARD drive is recognized?
  The BIOS can be modified outside the update (check page driver Toshiba-> Archive-> archive of Satellite).
  But vary important is that you use a compatible HARD drive.

  > Can someone help me with the recovery CD?
  Don t know if you will be able to order this CD at the service provider allowed in your country, because the laptop is really an oldie. But you should ask the guys.
  What you is to install the OS from the Microsoft CD-ROM and then could install drivers needed.

  Greetings

• Hard drive is not recognized in the BIOS - Equium A60

  Hi hope someone can help. I have a Toshiba Equium EA60-173 and the hard drive is not recognized in the BIOS. When I remove the hard drive and put it in another laptop it is detected fine. I also tried another hard drive in the Toshiba and that does not work either. So I suspect the IDE controller has disappeared, but can I do to confirm this? I wish there was an option in the BIOS to force detection. I updated the BIOS but still the same.

  This laptop is only just out of warranty, so if it is the controller would I need to replace the motherboard? Are there other options at my disposal?

  Thanks in advance.

  Hi Neil,

  Unless there is some physical\problem with the cable/connector hard drive, then it is most likely that you will have a new mainboard for your laptop. I suggest you to contact an authorized service partner and ask them to check your laptop and give you an estimate of the cost of the repair. Then you can try to shop for less expensive alternatives.

  Kind regards

• Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  A message on the RAID 0 volume failed is a recognizable error message, but the news is not good.

  RAID, by its nature, requires 2 or more drives.  RAID = redundant Bay of independent (or inexpensive) disks

  RAID 0 is the worst of the different RAID choices.  It increases the performance of hard disk by spreading or striping, data on two disks so that he can read and write more quickly. Unfortunately, such a picture offers no protection of data - in fact, it increases the chances of loss of data since the failure of a disk in the array results in the loss of all data on both drives. RAID 0 configurations are standard on high-end and PCs graphics games and provide a performance gain measurable, albeit modest for games, graphics applications and other programs intense from the hard drive.

  In view of the foregoing, the best course of action for you and your parents is to take the computer to a local computer professional - not a type of place BigBoxStoreUSA or GeekSquad.

• E-Machine with XP when you don't use shutsdown. Hard drive stops but starts when the mouse moves. But XP does not start. Need to unplug and then plug in and start the PC.

  ' ' I get the error message 'A' recovered from a serious error report = ' BCCode ea BCPI 8507b6e8 BCP2 869 B 7800 BCP3: 869 B 8378.  Included files: "owner\locals\locals ~ 1\temp\wer9274." DIR00\MINI 121909-02mp "Hope someone understands. I keep the hard drive running to collect the info from my weather station.

  Go into Control Panel, then Power Options.

  On the power management tab, what is your power mode? Below which correspond to the parameters for this method of power - to turn off the monitor, hard drives & go standby time of the system.

  If you want to keep the hard drive, scroll down the drop-down lists & select "Never" turn off hard drives and the day before.

  Go to the Hibernate tab, and then remove the tick in the enable hibernation check box.

• Samsung external hard drive appears... The lights are flashing

  Suddenly my Samsung external hard drive will appear in my Windows Explorer or disk management, the lights flash, but it does not seem to connect to my laptop, have tried on 3 other machines and still does not. Anyone have a similar experience?

  Perhaps just what the usb cable?

  Hello Fregal

  Thanks for posting your query in Microsoft Community.

  As you said there are problems connecting external hard drive to the computer.

  I would like to know some information about this problem to help you better.

  (1) have you made changes in the computer or hard drive recently?

  (2) the hard drive didn't work on any of the three machines?

  (3) what is the model number of the hard drive?

  In the meantime, please try to follow the following suggestions to solve the problem.

  If you have another USB cable for the hard drive then try to check the matter with different cable.

  If this doesn't help then try to follow the link below to run the fixit and see if that helps.

  http://support.Microsoft.com/mats/hardware_device_problems

  I hope this works. Otherwise, feel free to write us again and we will be happy to help you come.

  Thank you