W7 64-bit &; P2015
Where can I find a driver for the Laserjet P2015 dtn? The site indicates that Windows update, but it doesn't. I was able to install it on a 32-bit computer, but not 64.
prostang wrote:
Where can I find a driver for the Laserjet P2015 dtn? The site indicates that Windows update, but it doesn't. I was able to install it on a 32-bit computer, but not 64.
I have it available on 64-bit of Windows Update, it is listed as "HP LaserJet P2015 PCL 6" just below the "HP LaserJet M9050 MFP PCL6' in the list.
Tags: HP Printers
Similar Questions
-
LaserJet p2015 is not compatible with Windows Vista 64-bit
I just got a new computer with Windows Vista 64-bit operating system. I tried to connect my HP Laserjet P2015 printer, but it was not recognized. In addition, the computer does not recognize the CD supplied with the printer. Download the necessary software on this site? I can't seem to find it on mine, and I am a novice when it comes to computers. Any help out there? see you soon
Go to Support & drivers above. Click on drivers. Enter the model number of your printer. A list of drivers should appear. IF Windows Vista 64 bit is listed, click on that and you should be on your way. BUT be aware that not all older printers are compatible with Windows Vista 64-bit. I have a HP Scanjet 4470c which is not compatible with Windows Vista 64 bit on my new HP computer. So I have a HP Scanner perfectly although I can't use and this Scanner is not that old. Good luck!
-
How to install the HP LaserJet P2015 printer in Windows 7!
Hi all!
I'm luck using windows 7-32 bit. I would like to install the printer HP LaserJet P2015 in Windows 7, but I can't install it because during installation, it could not get. In fact, I can install it on Windows XP without any hindrance, but now I've upgraded to Windows 7 32 bit. Could you tell me what to do to solve it?
Thank you very much and I look forward to hearing of all.
My best regards,
CHANCE
Hey good LUCK.
The printing of your driver functionality is prodided by the HP Universal print driver.
You can download the driver by clicking on the button to download from the link below:
If you may find it difficult to understand all the steps of the installation, you will find full details below:
http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02536202#A6
Please let me know of any necessary clarification.
Sincerely,.
Shlomi
http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02536202#A6
-
Printer sharing in Windows XP for Windows 8 (64-bit)
Hello!
How to connect Windows XP shared printer to Windows 8 (64-bit).
When I connect the 8 (64-Bit) windows printer it shows a message.
"No driver found" () Windows cannot find a driver for HP LaserJet P2015 Series PS on the network. To locate one manually, click on OK. Otherwise, click Cancel and consult your network administrator or the printer manufacturer's Web site. )
I click OK. And then, I connect to my shared printer on xp through windows 8. It displays a message.
"Connect to the printer" () Windows could not connect to the printer. Check the name of the printer, and then try again. If it is a network printer, make sure that the printer is turned on and that the printer address is correct. )
Thank you.Hi Malik.
I suggest to try and install the latest printer drivers for your model of printer from the HP website and check to see if that solves the problem.
You can download the latest drivers for your model printer from this link:
Drivers, Software & Firmware for HP LaserJet P2015 printer
Follow the instructions provided on the Web site to complete the installation process and check to see if that solves the problem.
For more information about printer sharing and troubleshooting of the printer, you can see these articles:
Hope it will be useful. Please get back to us with the results.
-
I can't install my wireless dn P2015 Printer Laser Jet with MS 7 software.
For three years the P2015 worked 'Wireless' on my Lenovo T60p with microsoft XP. He walked through my router wireless and print correctly.
I have just updated the software MS 7 (32 bit, 2007) and the printer will not work on the router. I plugged the printer up directly by cable, downloaded printer out of MS 7 software drivers and it worked very well attached. The router works fine with MS 7 for internet and e-mail on my computer and other computers (even MS XP) on the router.
I tried to install the 2015nd Jet Laser using the driver CD that came with originally and I come to the screen 'looking for available printers' and there is nothing in the box below to choose (white screen). It will but a routine "looking for available printers' and finally the message came"no printer has been found. " This same thing happens when I try to download drivers HP Web site. I get the same screens and the same results.
What should I do? (I am a beginning computer knowledge level)
Is the Control Panel on the printer itself? Where is the control panel of the printer?
-
Safari in 32-bit mode in El Capitan
Hello
For school, my children need access to the Web site that runs 'Shockwave '. They are not currently open.
Navigation online suggestions say run it in 32-bit mode, with instructions on how to do it.
However, when I access the app Safari (version 10), and "Get Info", the check box option is not there to run in 32-bit.
Does this mean that I can't go back now?
Thank you.
Steve.
With Safari 10, you cannot return to running in 32-bit mode, if that's what you're asking.
-
Can I boot in 32-bit mode?
MacBook Pro 17 "(8,3) i7 2.2 GHz Quad Core 16 GB DDR3 750 GB HD OS X Mavericks 10.9.5"
I am trying to connect to a USB 1.1 device which has incompatible firmware with 64-bit OS X. The camera manufacturer's instructions for a workaround that allows access to the device to update the firmware, providing support OS X 64-bit. Of workaround requires me to start in 32-bit mode by pressing the '3' key and '2' during the start cycle. They show how to check and see if your Mac is in 32-bit mode, but their example does not match my window, and my machine doesn't seem to be in 32-bit mode. I found several references to this '3' start + "2" keyboard shortcut, but nothing official from Apple.
Please do not recommend upgrading the OS. The software I'm using is not supported by the manufacturer past Mavericks.
Thanks in advance for any help.
If the software is compatible with the Mavericks like you state that the developer shows you should be able to use the device in 32 or 64 bit.
When using any modification of the startup of the suggestion of anyone on the internet always proceed with caution, and damages are exclusively your own:
Method 1: Start key combination
This will bypass the default mode and use a different mode for single session.- If your Mac uses the 32-bit mode by default, press 6 and 4 at startup
- If your Mac uses 64-bit by default, press 3 and 2 at startup
Note: Your Mac will return to the default mode the next time it starts. Method 2: Setting disk
This will change the default mode used by your Mac when starting. For 32-bit mode, use the following command in a Terminal:- sudo setkernelbootarchitecture systemsetup - i386
For the 64-bit mode, use the following command in a Terminal:
- sudo systemsetup setkernelbootarchitecture - x86_64
-
iMac (retina 5K, end of 2015) in 64 bit mode?
How can I tell if my iMac (retina 5K, end of 2015) runs in 64-bit mode or not?
10.11.6 OS
Y at - it software that would let me set it to 64 or 32?
Thank you.
Mac
All iMacs for years past were 64-bit, yours is. I believe that there is evidence in the application of the information system, but you will need to do some research.
-
iTunes 64-bit in Windows 10 installation problem
Try to install using the various links:
1 Download iTunes 12.4.3 for Windows (64-bit-for older video cards)
2. http://www.apple.com/in/itunes/download/
Two of them are in error when installing as shown in the attached snapshot.
I would like to help on this please.
bharadUN wrote:
Try to install using the various links:
1 Download iTunes 12.4.3 for Windows (64-bit-for older video cards)
2. http://www.apple.com/in/itunes/download/
Two of them are in error when installing as shown in the attached snapshot.
I would like to help on this please.
I just got an "unsigned driver" error and wouldn't install message. He suggested then I select "Download only" and try to install it. I don't know if I'm ready to try again. I have the latest installed Win10.
-
is my i mac 32-bit or 64-bit?
How do you determine if my office iMac processor is 32 or 64 bit?
It is 64-bit, or you cannot run 10.9.5.
-
12.4.3 iTunes for Windows 7 32 bit
I do you
You try to download it? Download iTunes 12.1.3 for Windows (32 bit)
-
Y at - it a 64-bit version of 43 FF and it's ready for primetime?
When FF 42 came out the information I had was that the 64 bit version for Windows had not all plug-ins of the 32-bit version. I was left with the impression that he was still developing. At FF 43 moved beyond that?
Yes, I think that it is correct.
-
Do you need to uninstall the 32-bit version of firefox to install the 64-bit version?
I tried to install the 64-bit version of Firefox and it seemed just overlay the 32-bit version. Is my 64-bit version now or still the 32? I don't know how to say or how to put in the 64 bit one if it did not work.
You have posted here with the 64-bit version of Firefox 43.
-
Whitelist Google Earth Plugin for FireFox 64-bit?
Would it not possible to whitelist, this plugin for 64 - bit as has been done for silverlight?
Hi berwyn, mozilla won't because the plan published (as do other browser vendors as well) is completely remove support for the npapi and move the web content plugin. the win64 version already takes this kind of slate.
https://blog.Mozilla.org/futurereleases/2015/10/08/NPAPI-plugins-in-Firefox/
-
Is it possible to install 64-bit Firefox in addition to the 32-bit version on a Windows OS?
As the new 64-bit version was released with the help of Add on a minimum, I want to use next.
When the support or 64-bit modules newly emerge I would dissipate the 32-bit version because I only work on 64 bit systemsInstall the Win64 version in a different folder where the 32-bit version is installed, by using the custom option. And if you want to be able to run both versions at the same time create a new profile for Win64.
Maybe you are looking for
-
Cannot use Global Variable in the Structure of the event
I'm using LabVIEW 2009. In my LabView project, I have a global Boolean variable called EStop. I can read and write the global variable. If I double click on the global variable, it takes me to EStop.vi which includes a text button. EStop.vi is part o
-
Display the emails in Outlook Express
Hello I recently installed a Microsoft WebCam with Windows Live Essentials. I continue to use Outlook Express to compose, send and receive emails, but record everything I need to keep somewhere else on my PC. When I open these saved emails they now o
-
Hello. Here are some files dump of my crashes: http://cid-5cfec8d823e42bd3.office.live.com/browse.aspx/.Documents Here's what happens: Since June, I've had several accidents with the blue screen noting CRQL_NOT_LESS_OR_EQUAL (Yes, CRQL, no IRQL level
-
Is it possible to connect the HP Photosmart C4780 Wireless printer without USB cable?
Hello My family and I recently moved and while moving, something inevitably get lost or left for account. I am fighting to get this printer and will so I don't have to bother people at the front desk at school to print my documents for me. I have l
-
To use the wallpaper on my desktop background and I can not find it on painted windows.
Original title: Camille Hello I'm Dave and I hand Hasma Wallpaper on you tube and I want to use the wallpaper on my desktop background and I can't find it on the windows desktop backgrounds or in the Well can help you I want it to posted on windows w