Wacky image sequence number - sparkles

Similar Questions

• Drag and drop the Image sequence number

  Hello

  IM bad having to drag / drop a folder of image sequence. Folder hangs out perfectly and the window further emphasizes, but nothing happens. However when I go to FILE and IMPORT I success bringing in the sequence of images as a model.

  This problem is resolved by update fixes after effects CC (12.2.1), which is now available:

  http://Adobe.LY/AE_CC_1221

  Note the part at the end of this page on a crucial update for the creative cloud desktop application, which addresses serious problems with the SOUL, first Pro and After Effects.

• Image sequence number

  Hello

  I'm new to Design CS6, I created a rendering video in photoshop and exported to the sequence of images for placement in InDesign.

  (I am after the "how to create iPad apps in InDesign CS6" tutorial)

  Followed all the steps in the tutorial Adobe and everything has worked... yesterday at least...

  Today, I made a new video rendering in photoshop and followed the exact same process, but when this second sequence is placed into InDesign, the "miniature" (correct word?) or the image that set - shows in the middle of the video?

  Then when I saw the Folio Overlay, the sequence of starting in the Middle, then jumps to the first frame and works very well from there...?

  I'm sure this must be a problem exporting from keyframes in the timeline in Photoshop, but I have traced my 15 times and does not change the procedure?

  I also re-inserted the video I did yesterday to InDesign, to see if it was a question of InDesign - but the original video worked perfectly again?

  I am totally confused, have no idea what to try now...

  Any help?

  Thank you 1 million.

  I would like to rename their beginning with _01 and go from there.

  Bob

• Play the image sequence

  Hi, I have png image sequences in my active folder, and I would like to 'play '. Is it possible to do?

  Thank you

  According to the number of images, quality images and delay between each picture, you could probably get away with just using a QTimer.

  Although I have not tried with cascades/bb10, I did it with older BBOS and almost never ran into performance issues...

  in a nutsheel to store a table of images then set up your QTimer (e.g. all the 1 second) to display images in this table using a circular counter.

• How to import image sequences which have been made in layers of Blender to the AE?

  Does anyone know how how to import image sequences which have been made in layers of Blender to the AE?

  I tried to make it to the first plan and background in separate layers in a blender & bring to AE as sequences of images separate but have so far failed.

  I used targa, .tiff, .png, and same openEXR multicoated, but none worked for me so far.

  I do it all the time. Make your sequence of images in a separate folder for each passage, use a number like bg_0001.tif format, go it to file > import and select any file in the folder and check the box image sequence, and then import.

• Reasons for image sequence option being grayed out

  I am trying to import still images as a sequence of images, but when I want to import images the possibility to sequence them is gray. I read all the other posts and know to select only the first file, and all files must be digital etc etc. I saved my JPEG pictures of as well as png from Photoshop, I've renamed the shorter sequences number etc.

  So my question is, what are the reasons for the grey of course option? What criteria must be met for this option. I put my wrong project preferences. Recorded files in the wrong dimensions/resolution? Or perhaps use the wrong conversion software? Finally I have only 8 images to import... This could be the reason?

  That's the problem.

  First letters and numbers.

  000001_PM.PNG will not work, but will be PM_000001.png.

• problem: import the image sequence into adobe media encoder

  Hello

  have a problem with adobe media encoder CS6, change the display Format to 25 time frame in the preferences of media coder, I import a series of TGA (170 images) to media encoder in an image file TGA sequence, the series generated from 3D applications Max and ToonBoom, specification of TGA series 1080 50i "1920 X 1080 - high filed - 25 frames per second. When I import the sequence, encode media recognize the sequence as 1920 X 1080 - progressive - 29.97 FPS, to interpret the window images options I change the settings of the upper sequence deposited - 25 fps, and I export to quicktime mov 1920 X 1080 - class top - 25 fps uncompressed

  the problem:

  mov file is 06:20 and it is right for the 170 25 fps calendar but mov file does not contain the tga series image, image freeze in time code 05:16 (number 142 of the framework) and duplicate the 142 image to the rest of the video file

  If I do not change the pace to interpret the window options images for the tga sequence what media encoder recognizes as 29.97 FPS mov file contain all TGA images, but with a duration of 05:16 which not 25 fps

  in adobe media encoder CS5.5 I don't get this problem at all

  1. How do I solve this problem?

  2. how to force CS6 adobe media encoder to recognize the image sequence imported as rate of 25 fps?

  Windows 7 Ultimate SP1, Adobe Creative Suite Master Collection CS6

  Thank you

  Post edited by: yas1amin1mah

  "Film" is finally fixed in November 2013 video updates of creative cloud. If your version of Premiere Pro and SOUL is or more 7.1.0 everything should work as expected. But don't forget to actually perform "Film" on your source in first Pro CC or CC SOUL that, otherwise your sequence of images will continue to be interpreted as 29.97 FPS by default.

• Rendering of image sequence problem

  I use Adobe Photoshop CS6. I never had this problem before, but now I have a lot of layers and I want to export them by video rendering (sequencing of the Image).

  I want all the layers in the document to be redered, each being separated. PNG file (it's the sequencing of the Image, right? "Correct me if I'm wrong). Earlier, as I remember, I could make layers and they would have become isolated. PNG (no problem) files, but now it is only made a single file (a single layer, that too, with no transparency - black background).

  What I am doing wrong?
  

  Here's the rendering parameters:

  Layers - 97

  Format - PNG (compression enabled, non interlaced)

  Size - Size of the Document (200 x 200 px)

  Cadence - cadence of the Document (30 fps)

  Range - all managers

  Alpha channel - no

  Quality 3D - interactive

  You're kind of quibble. Back in CS2 and earlier there was no keyframing some frames and each layer has been assigned to an image. It is these images that can be exported to a sequence of images.

  The only step the forgotten OP was creating environments of layers, which is available in the timeline panel, if the time line is mode frame.

  After that's done then export to image sequence works.

  But as you said, using the script is a little faster because it reduces the number of steps required to get the same result.

  That's assuming that the OP has created a layer for each image, he needs for his animation. (again, assuming that he wanted to make an animation).

  So much assumtions. Aye, aye, aye...

• How to find the sequence number of av

  Downloaded eset uninstaller, but he asked for the sequence number

  Hello Damien,.

  If you don't know, go to the icon of the program or file name and right-click on it and select properties and in the window that opens, read on the top row of tabs up until you get to the Details tab, click to open the tab. The sequence number is given here?

  If not, a freeware for you program called siw (System Information for Windows), download it here: http://download.cnet.com/SIW-Technician-s-Version/3000-2094_4-10915770.html . The application requires no installation, you simply double-click the name of the executable file, and the program opens to the software section. Scan down the list until you find the applications tab. Click to open your list and find details of eset and see if the sequence number is in the list.

  One of these two approaches should solve the problem for you. Let me know how you fare.

  Kind regards

  BearPup

• Help on recovering database /Restore - no available controlfiles kccpb_sanity_check_2 control file sequence number mismatch

  Hi all.

  I really need your help on this:

  (1) version: 11.2.0.1 EE / Windows.

  (2) database does not start, don't get database.

  Alert.log info:

  Instance of stopped by USER, pid = 3652

  2015-11-22 15:57:19.763000 - 04:30

  I found this after using adrci:

  2015-11-22 15:49:15.727

  SESSION ID: (191.1) 2015-11-22 15:49:15.727

  CUSTOMER ID :() 2015-11-22 15:49:15.727

  NAME OF THE SERVICE :() 2015-11-22 15:49:15.727

  MODULE NAME: (sqlplus.exe) 2015-11-22 15:49:15.727

  ACTION NAME :() 2015-11-22 15:49:15.727

  Informational message:

  Control file 1 has seq 2713995, low 2713994 file # 0

  Error: kccpb_sanity_check_2

  Control file sequence number mismatch!

  fhcsq: bhcsq 2713995: 2714016 cfn 0

  2015-11-22 15:49:15.758

  USER (ospid: 2504): put an end to the instance

  Verification of MOS Note: 435436.1 I must:

  (1) to restore a backup of a controlfile and recover

  OR

  (2) to recreate the controlfile

  OR

  (3) restore the backup data and recovery

  It is a database, that I was not, up to now administer. But:

  (1) I tried from the database with addressed controlfile (the one located in FRA). No luck. (Create pfile from spfile / startup pfile)

  (2) the database is not mount / open. It hangs on the editing process. So I can not issue an alter database controlfile to trace.

  It seems that my options are:

  (1) manual creation of controlfile with open resetlogs option. This option is viable, but risky if we miss a datafile or something GOLD

  (2) restoration of RMAN backup. The thing is that the most recent copy of automatic backup of controlfile is since a few days early (4 / 5 days).

  I found this link: http://gavinsoorma.com/2009/07/rman-recovery-from-loss-of-all-control-files/

  The procedure seems easy, but since this controlfile is not in the current SNA of database (data files, etc.). I'm not sure it if it would work.

  So in short, I think I have an automatic backup controlfile and it's OK. but a little old. I can restore from this copy of CF?

  Please I'm pressed real here, so help will be greatly appreciated!....

  Thanks in advance!

  Best regards, Luis...!

  Hello

  It seems that my options are:

  (1) manual creation of controlfile with open resetlogs option. This option is viable, but risky if we miss a datafile or something GOLD

  (2) restoration of RMAN backup. The thing is that the most recent copy of automatic backup of controlfile is since a few days early (4 / 5 days).

  It seems that you have few options,

  In my opinion, you should start with option 2), but you have logs archived redo and all and all the backups of catalog and perform a restore.

  After, if not works, you must manually create the control files, but you are right, you must carefully on all the data files. Here a log generated in the last level 0 RMAN backup could help you, don't forget the newspaper are all entries of data for backup files.

  I wish to have more ideas to help you, but I have no other.

  I hope this helps.

  Kind regards

  Juan M

• Create proxy for the image sequence

  Hey guys,.

  Today, I was delighted to see the newly implemented for PremierePro proxy workflow.

  Unfortunately I have not yet figured out how to apply this workflow for image sequences.

  Is this possible?

  Background:

  We do not stop motion animation and all our images always comes into frame sequences with each frame being 20 MP. We want to keep the resolution up to photo-serrure, because we would like to keep the possibility to crop and zoom into images.

  So far, we have created lowquality of sequences of images as proxies (in the same resolution) and they use them for editing in a FullHD timeline, where we can evolve and frame (and of course change) images. After picture lock replaced the original media. Once the images is online and the harvest is final, we create a FullHD prores file for VFX and editing.

  But this process is error-prone.

  When I now import a sequence of images in the creation and create a proxy for her, a mov with only the first image file is created.

  Which is obviously useless.

  My question:

  1 would it not possible to import a sequence of images and create a sequence of images of proxy (with the same interpretation of the images, i.e. of framerate) from the original image sequence?

  2. the sequence of images proxy perhaps erred in lower resolution (original image in format 5760 x 3840 px, resolution 1920 x 1080 proxy), and once I pass the proxy to original scaling is adjusted accordingly.

  Really looking forward to some tips to achieve this!

  Thanks and good luck

  Max

  I had a little further:

  I made a mistake by creating templates in the MediaEncoder:

  I created a coding model and not a model of ingestion (who both the end of the .edr file), which should in fact have been obvious.

  So now I have:

  1 has created a file of 5760 x 3840 Prores4444 out of sequence of images

  2 imported the first PorRes4444

  3 creates a proxy using my own template (ProRes 422 Proxy 1920 x 1280) with aspect ratio 3:2.

  It works, BUT:

  When I play the file on the timeline proxy, the proxy file is adjusted differently than the original file (proxy disabled), but only during playback.

  It is probably a completely different question, I'll create another post for this.

• several insert using the same sequence number,

  Hello

  I need to use the same sequence number in several documents (insertion).

  Is this possible and how?

  Thank you

  It depends on how you are doing multiple inserts.  If you then run a bunch of single inserts something like:

  dev1 > create table t (ID, descr varchar2 (10));

  Table created.

  dev1 > create sequence t_seq;

  Order of creation.

  dev1 > select double t_seq.nextval;

  NEXTVAL

  ----------

  1

  dev1 > insert into values t (t_seq.currval, 'Rec 1');

  1 line of creation.

  dev1 > insert into values t (t_seq.currval, "Rec 2");

  1 line of creation.

  dev1 > insert into values t (t_seq.currval, 'Rec 3');

  1 line of creation.

  dev1 > insert into values t (t_seq.currval, 'Rec 4');

  1 line of creation.

  dev1 > insert into values t (t_seq.currval, 'Rec 5');

  1 line of creation.

  dev1 > select * from t;

  ID DESCR

  ---------- ----------

  1 rec 1

  1 rec 2

  1 rec 3

  REC 2 4

  REC 2 5

  You can use a similar approach, if you select data from another table as long as you can make the selection sufficiently selective to retrieve only the lines you need.

  John

• When I scroll through the mask of image sequence does not follow the layer of the timeline?

  Another problem. I simply scroll the image sequence and you can see on the screenshot that the mask remains where it was in the beginning. I applied red tinted effect (just to show you), and it does not stick to the station when scroller is at the end of the timeline which is say that the mask is not to follow. But it should, because the mask is the image sequence. Why? Please take a look. Maybe there is something wrong with the Ctrl c and Ctrl v method - it's how I inserted my BW mask in the layer mask?

  

  Select the two layers of video group and convert it into object new Dynamics

• How to set the default value of the attribute with a sequence number? Is it possible to add a string to seq.no. like abc0001?

  Mr President.

  How to set the default value of the attribute with a sequence number? Is it possible to add a string to seq.no. like abc0001?

  Concerning

  For the date, you can use groovy expression adf.currentDate to set the current date. reference http://adfgouravtkiet.blogspot.in/2012/11/how-to-set-default-values-for-entity.html

  You already have ways to use the sequence.

  How do you add a new value in the form. You're creating a new line of your page (user interface) and by engaging with validation operation? Unless you commit you will not be able to see anything in the table.

  Thank you

• Generate the sequence number

  
  create table t
  (id int primary key,
  dt date,
  file_no int,
  batch_no int,
  data varchar2(5)
  );
  
  insert into t values (1,trunc(sysdate),23,113,dbms_random.string('a',5)); -- 1.1.1
  insert into t values (2,trunc(sysdate),23,345,dbms_random.string('a',5)); -- 1.2.1
  insert into t values (3,trunc(sysdate),23,345,dbms_random.string('a',5)); -- 1.2.2
  insert into t values (4,trunc(sysdate),23,543,dbms_random.string('a',5)); -- 1.3.1
  insert into t values (5,trunc(sysdate),23,543,dbms_random.string('a',5)); -- 1.3.2
  insert into t values (6,trunc(sysdate),23,543,dbms_random.string('a',5)); -- 1.3.3
  --
  insert into t values (7,trunc(sysdate),24,333,dbms_random.string('a',5)); -- 2.1.1
  insert into t values (8,trunc(sysdate),24,333,dbms_random.string('a',5)); -- 2.1.2
  insert into t values (9,trunc(sysdate),24,333,dbms_random.string('a',5)); -- 2.1.3
  insert into t values (10,trunc(sysdate),24,222,dbms_random.string('a',5)); -- 2.2.1
  insert into t values (11,trunc(sysdate),24,222,dbms_random.string('a',5)); -- 2.2.2
  insert into t values (12,trunc(sysdate),24,111,dbms_random.string('a',5)); -- 2.3.1
  
  
  

  Oracle 11.1

  How can given this structure and data, I generate sequence at the end of each line numbers? Basically, the sequence number (x.y.z) is such that x (1.n) is awarded for each unique value in file_no. In each x, y (1.n) is assigned for each unique value of batch_no. Within each y, z (1.n) is assigned for all records of this batch. Sample data shows only dt but all sequences must reset and start over when dt changes.

  I tried using row_number() over (partition by dt, file_no) and such but nothing quite gives me what I'm looking for.

  Help? Thank you

  Hello

  HELEN wrote:

  If you look at my CREATE TABLE, the ID column is a primary key and represents the order of the data in the file.

  Done batch_no = 100 come before or after 101?  Batch_no = 100 a ID so much until after the id for batch_no = 101.

  Good point, but that won't happen because of the way the 'record' is generated. All batch_nos will be contiguous. So if batch_no 100 comes earlier in the file as 101, it should get some 2nd highest sequence number. Otherwise, lower. Basically, the 2nd part of the sequence must simialar logical number to the 3rd party (i.e. order by id) but that messes things. Still struggle with it. Any help appreciated.

  I think I understand.  You say that, because of the way that the ID is issued, it wouldn't matter if you used the highest id of the batch_no, or the lowest id, or the average, or if you chose one at random; you would get the correct order in all cases.

  The following query uses the id low in the order file_no and batch_nos.

  WITH got_min_ids AS

  (

  SELECT id, dt, file_no, batch_no, data

  MIN (id) over (PARTITION BY dt

  file_no

  ) AS min_id_file_no

  MIN (id) over (PARTITION BY dt

  file_no

  batch_no

  ) AS min_id_batch_no

  T

  )

  SELECT id, dt, file_no, batch_no, data

  DENSE_RANK () OVER (PARTITION BY dt

  ORDER BY min_id_file_no

  )

  || '.'

  || DENSE_RANK () OVER (PARTITION BY dt

  file_no

  ORDER BY min_id_batch_no

  )

  || '.'

  || ROW_NUMBER () OVER (PARTITION BY dt

  file_no

  batch_no

  ORDER BY id

  ) AS seq

  OF got_min_ids

  ORDER BY dt, min_id_file_no, min_id_batch_no, id

  ;

  The main request is in fact what I posted before, but instead of

  "ORDER BY file_no" and "ORDER BY batch_no", she uses

  "ORDER BY min_id_file_no" and "ORDER BY min_id_batch_no".  These values are calculated in the subquery, got_min_ids.

  Output (including the additional sample data I posted):

  ID FILE_NO DT BATCH_NO SEQ DATA

  ---------- ----------- ---------- ---------- ----- ----------

  1 23 25 April 2014 113 dXAad 1.1.1

  2 345 23 25 April 2014 pumVG 1.2.1

  3 345 23 25 April 2014 jLnbO 1.2.2

  4 23 25 April 2014 543 xKhCL 1.3.1

  5 23 25 April 2014 543 JQoWk 1.3.2

  6 23 25 April 2014 543 YjJeC 1.3.3

  7 24 25 April 2014 333 WjQNE 2.1.1

  8 24 25 April 2014 333 ScWSL 2.1.2

  9 24 25 April 2014 333 pXDSD 2.1.3

  10 222 24 25 April 2014 OSajn 2.2.1

  11 222 24 25 April 2014 QNpix 2.2.2

  12 24 111 OwkjI 2.3.1 April 25, 2014

  91 100 99 25 April 2014 sRWmT 3.1.1

  93 100 99 25 April 2014 IAEFd 3.1.2

  92 101 99 25 April odQxh 2014 3.2.1

  I know you said that this situation is impossible (that is, if ID 91 and 93 have the same batch_no, then id 92 cannot have a different batch_no), but the application works even if this rule is broken.