WAG160n measure of adsl line?

Similar Questions

• Router ADSL line

  Hello

  I have a wireless router, the problem is that sometimes intermittently when ADSL is red instead of green and sometimes the ADSL and ADSL which are green light turn off and after ometime ignite again, in both cases where I don't get internet.

  I can't sem to understand if this is a router or Windows XP SP2 problem?

  Thank you

  THANKS TO ALL WHO RESPONDED...

  Start with your ISP.  It's probably a phone line problem, a problem to your ISP or a router problem.

  But you should have installed XP sp3, a long time ago.

  The following text is from an old post of MS MVP Shenan Stanley, but it is still topical advice

  WinXP SP3 - read all the prerequisites for a successful installation
  http://msmvps.com/blogs/harrywaldron...tallation.aspx   (if this link does not work, try this one: http://webcache.googleusercontent.com/search?q=cache:n8P_zdluJVEJ:msmvps.com/blogs/harrywaldron/archive/2008/05/08/windows-xp-sp3-read-all-prerequisites-for-a-successful-installation.aspx+harry+waldron+prerequisites&cd=1&hl=en&ct=clnk&gl=us&source= www.google.com)

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  Suggestions:

  (1) download the full installation of SP3 file or burn the ISO download to
  CD.
  (2) ensure (as is likely) you have no spyware/malware doing a full
  Scan with SuperAntiSpyware and MalwareBytes.
  (3) CHKDSK
  (4) defragment
  (5) make sure that your drivers are up to date (from the material
  respective web pages of the manufacturer).
  (6) restart the right before you try to install SP3.
  7) disconnect from the internet before installing (physically).
  (8) disable your antivirus and software anti spyware applications when you are about
  install SP3.

  Some (if not all) which is covered in the links above.

  Other than the "automatic updates" or the Windows Update web page - how can you
  get SP3?

  Windows XP Service Pack 3 - file to Image CD ISO-9660
  http://www.Microsoft.com/downloads/d...displaylang=en

  Windows XP Service Pack 3 network installation Package for
  It professionals and developers (works as well for you.)
  http://www.Microsoft.com/downloads/d...displaylang=en

• How to draw a measurement tool Info line?

  Hi, I need to draw a line with a specific mathematical accuracy and believe that I have defined it in the measurement tool:

  

  It's to-60 degrees by 203,0 (whatever)

  How could I draw this line (in width of 1 pixel)?

  I could define my pencil to 1 pixel and shift + click to close with trial and error, but I really need an accurate measure if possible because I have 12 lines to draw to varying degrees... I'm building a graphic high resolution of pie style for industrial use and accuracy is important.

  Thanks in advance...

  Well, the pencil tool is not anti-aliasees, so it will look like jagged. But whatever, if you want any line to look less "irregulars" of work and more high resloution you can.

  BUT... while testing pencil drawing, I think that a bug appeared. Scott (or anyone else) might want to check drawing with the pencil tool to see if they see problems of rendering (display).

  BUG:

  So far - create a new file of 2000 X 1000 px. RGB (size seems to watch). Select the pencil tool 7 px. View zoom set at 33% (I have Open GL on) draw once with a pencil. It is visible. Successive strokes are not made until you change the zoom percentage.

• read the measure about 10 lines instead of each line

  Hello.

  I have the dilemma.

  I have a file of great extent with 1ms rate and number of columns. If a single line, a miliseconds.

  Now, I don't need this big resolution, I only need data to 40 ms.

  How can I do?

  Thank you.

  Something like that.  I clicked on the text file reading and has configured to read the lines, reading 10 lines at once.

  

• l2l more unstable fall vpn connection ADSL line

  Hello. I have a remote site connection vpn l2l is declining daily (remote site uses pix 501 (6.3), head office use asa 5510 (v7).) The only way I found to restore the connection is to restart the 501. The ISP have diagnosed a faulty line that keeps fall occasionally, but is it not the vpn can automatically reconnect if the line falls for a significant amount of time, which I think is the problem earlier? Thank you.

  You have KeepAlive enabled for this tunnel on both ends?

• No visible measurement Distance/area line

  I'm working on a Windows using Adobe Acrobat DC Pro 8.1. I have been using the tool to measure for measure investigations and plans. Today, I have clicked on some unknown key and off the contour used is displayed while working. How to bring back this sketch?

  Hi MattFlick,

  Please see this KB doc. helps Acrobat | Grids, guides and measurementsin PDF, might be useful.

  Kind regards
  Nicos

• BlackBerry Smartphones with ADSL line

  I have a curve 8310 and I put the a - i on my phone speed dials, but how to get there? Ex: I touched the button 'a' for my husband, and then green call button, but it says that no valid because it appears as an asterisk.  Ideas for quick access or how to use it yet?

  For example, if you set the N for a contact and you want to call this person, press the N key for 3 or 4 seconds, and the unit made the call.

  There are 3 letters that you cannot use in the speed dial. A, Q, W,.

  With the A, you can lock the device

  With the Q, you can change the machine vibrates only

  With the W, you can call the voice mailbox.

• HP2510 all-in-one does not connect reliable over my ADSL line when sending faxes.

  It initiates the transmission, hear the answer tone (s), said his connection, but expires.  Sometimes it works and it used to work reliably.  I can pick up the phone and say his attempts to define the flow of data, but it rarely connects.  Any ideas?  And by the way, I am move to the connection of the FO U-verse in two weeks.

  Hello

  The fundamental problem is that we not send sensitive data on the internet which is not when in time sensitive.

  When the hissing analogue sounds translate into packets of data to the internet, they can not arrive and be decoded amount from time to time the fax is now.  When the fax speed is set to a lower setting, increase of time allowed for the other fax answer.

  Here is a document that accompanies this step to change the transmission speed when SENDING a fax.  If you have any problems with reception, try to change speeds anyway, but you may need to ask the sender of the fax speed on the sent fax.

  http://support.HP.com/us-en/document/c00302247

• Down line ADSL X 3000

  Hello

  I have ADSL router Linksys X 3000, but I have a problem with it. I have it configured correctly (based on the manual of the internet service provider), repeatedly checked, but the router always said that ADSL line is down. I also have another router from Zyxel and it works perfectly with the same yarn and configuration, so I guess that the line is very good.

  There the router log, can someone help me, why the router is not connecting, please? Thanks for any help

  PPP pilot generic version 2.4.2 79
  Deflate Compression of PPP module part 88
  PPP BSD Compression module part 84
  PPPoL2TP kernel driver, 75 V1.0
  ccp_autowan_sm_thread => starts in unconfigured mode, detection of State! 125
  -> State disconnected! 78
  xDSL G.994 training 74
  -> detection of State! 75
  -> dslWanSt = 1, ethWanSt = 0 81
  -> Training RJ11 condition! 79
  ADSL G.992 started 73
  Analysis of channel ADSL G.992 82
  DSL link down 69
  -> State of bottom-disconnected! 83
  -> detection of State! 75
  xDSL G.994 training 74
  -> Training RJ11 condition! 79
  ADSL G.992 started 73
  Analysis of channel ADSL G.992 82
  DSL link down 69
  -> State of bottom-disconnected! 83
  -> detection of State! 75
  xDSL G.994 training 74
  -> Training RJ11 condition! 79

  As another modem (zyxel) works already then I agree that the adsl line works. After you have updated the firmware, you did another reset on the gateway and reconfigure the settings? If not yet, first try another reset and reconfiguration. If it always connects after the reconfiguration, so I think it's a hardware problem.

• Measures by lines in the PivotTable? OBIEE 11 g

  Hello
  
  Is it possible to display the measurements that the lines and columns attributes? I have only one value in my attribute columns.
  
  example:

  --------Company(Oracle)-----Country(India)
  Sales        100                  20000
  Units         50                  40000

  Thanks in advance.

  869650 wrote:
  Hello

  Is it possible to display the measurements that the lines and columns attributes? I have only one value in my attribute columns.

  example:

  --------Company(Oracle)-----Country(India)
  Sales        100                  20000
  Units         50                  40000
  

  Thanks in advance.

  In the PivotTable, you have a column for rows, columns and measures.

  Try this:

  Place labels of measurement in the lines section, the column of company in the columns section and your measurements in the action section.

• No satellite S2450 ADSL MODEM INSTALLATION PROB. NO FREE PCI SLOT

  I have a Satellite S2450 - 101 with XP installed on it, the machine is currently in Spain and I am trying to install an ADSL USB modem. However when you are trying to install is always a problem in the installation program indicate that it not there no free PCI card slots available for the ADSL USB modem to use. I've tried a few things to get this software to install, but no joy, I have removed devices using Device Manager pci slots to see if this new modem would use their slots recently released, but this does not work, so I was wondering if anyone has had a similar problem which can give the solution to this problem. installation is complete however when you try to use the modem to dial the adsl line it give an error of no available tone, it gives exactly the same respons if I unplug the modem, leaving me to believe that the system is not covering in any way with the modem during the dial-up procedure. As an aside to this XP did pick up and recognize this device and try to install it as a device ADSL-RE, but this is not the correctly the modem either... I tried using the supplied software and automatic installation XP. really need help on this one.

  Hello

  I heard nothing about such a problem, but it seems that your modem software does not work properly or your modem drivers are damaged!

  Downloaded a software update and modem drivers USB from the maufacturer homepage?

  You should also check if your USB 2.0 is working properly and test it with an evaluation of the performance program!

  Pete Bye

• Problem multiple measures OR-SCOPE

  My VI is attached. Several measurements of each line device for calibration purposes, the device is then attached to the material he puts to the test and measurements on each line again.

  This VI works very well to take measures for the whole of the calibration, but when it gets to the second phase for the trials it won't make medium or integral measurements. While it creates the snapshot data very well, the integral and the calculation of the average results are returned as NaN.

  The most amazing part is - the device as being made on two channels; one of the channels, the calculation of the average works well even in the test phase. This is only a single channel that does not work properly, only average and full measure, only in the second phase of the VI (when their configurations are set up to be effectively the same).

  A glimpse of what could cause this would be much appreciated.

  Thank you
  Wolley

  The code you use is rather involved.  Would it not possible to simplify your code to better isolate the problem area and perform the troubleshooting?

  Also, what do you mean by each line of a device?

• 6509 PXI and SCB 100 Port 0 and 3 Port have lines that are high

  Hello

  I work with a PXI-6509 connected to an SCB-100.  When I run the test panels lines 0,1,2 are high on port 0.  0,1,2,3 lines are high on port 3.

  I have a voltage of 3 volts measured between Port0 line 0 and Gnd (PIN 47 and PIN 50).  Nothing is connected to my SCB-100.

  I put the switches for the recommended positions for Digital passthrough.

  SW1, SW2, SW3 => on

  SW4, SW5-online off

  SW6-online on

  Please notify

  I found the problem!

  It was a twisted spindle.  Straightend out and now it works!

• To connect via PPPoE (dialer) Wireless ADSL

  Hello

  I have a WAG200G Annex-A Wireless G modem router ADSL residential, I used as a wireless router. Now I've changed suppliers (Auntie Indicom - in India), and they have a 'new technology '. Basically, instead of giving me a DSL line in my house, now they directly give me an Ethernet cable in my house (they have a local DSL box somewhere on the roof with various Cisco switches for each household). Then, they want to connect via PPPoE by starting a Dialer on my computer, this particular Ethernet cable is connected.

  Now, that works all very well, but we have more than one computer at home, and I would like to use Wifi instead of being connected at all times via the cable on my laptop.

  So now my question is:

  Can I configure the Linksys router so that IT don't the PPPoE dial for me? Basically this means plug the Ethernet cable provided by my ISP in one of the ETHERNET Ports and set up allowing to switch on (since there is no cable "line" adsl connected more) with my user name and password.

  Anyone know how to do this, or if this is possible?

  Thank you!

  P.s.: I've set up the Internet connection sharing via ad-hoc wireless, which works very well, but is only a temporary solution because I don't want to use my laptop as a router...

  It is not possible to configure WAG200G without ADSL line.

• EA6200 care about my phone line when it is connected to the dsl line

  Why the EA6200 router cause my phone line to busy out when I try to connect my ADSL line in the router? My Netgear is working with the same configuration. Do I need an extra modem? If the NetGear router is a modem/router and the Linksys is not?

  Thank you

  Yes, I hope that you don't damage the EA6200 connect the telephone line. Probably not well.