connection to A VERIZON JETPACK

Similar Questions

• C410a - wireless not connect to the Verizon FIOS router - fails MAC filtering

  I just bought an all-in-one HP Photosmart Premium C410a printer.  It does not connect to the Verizon FIOS Actiontek MI424WR router, failed the test of MAC filtering.  Spent half an hour on the phone with Verizon (no resolution as they checked the filtering MAC is turned off in the router) and 3 hours with HP (no resolution).  Sharing the printer on a home network defeated the purpose wireless and is not acceptable because I don't want to have another PC switched on just to get to the printer.  Someone was able to resolve the failure "MAC filtering" wireless?

  Without the MAC address filtering test indicates the problem is inconsistent with other available error messages.

  There may not be a real problem of filtering.  I saw this message associated with WEP key mismatches secutiry and a host of other issues.

  To what extent do you have on the installation.  We can work from there.

  Host family

  P.S. I saw messages asking people to try to disconnect the router from the internet while doing the configuration of the printer.  Have you tried?  Sometimes the router check with the service provider before it will allow a device to join the network.  It bypasses this audit.

• HP Photosmart Plus B210e but can't seem to connect to my Verizon Fios router

  I have the HP Photosmart Plus B210e but you are unable to connect to my Verizon Fios router which is an Actiontex M1424-WR.   The printer detects the name of the router and I enter the WEP key, but it does not connect.   The diagnoses listed without filtering status summary do NOT.   I connected to my router and checked that no MAC filtering is enabled.   I have two laptops which have no problem connecting to the router.

  OK, so a simple reboot of the router solved the problem

• N600 WNDR 3400 connection with Verizon Jetpack ROUTER

  How to connect a Jetpack Verizon as my Internet source to the router, I have no an or on lane CABLE MODEM? Thank you

  You do not have or do not

• Want 4520: Unable to connect MacBook Air to 4520 want with Verizon JetPack

  Printer shows successful login and MacBook rail together until the printer name.  I manually entered the IP but the printer driver is not displayed.  When I use the software of HP printer driver, Setup cannot find printer.  Seems that the printer can see the jetpack but not the MacBook. Any ideas?

  Hello

  Thank you for using the HP Forums.

  Here are some troubleshooting wireless;

  Troubleshoot wireless

  1. make sure that the printer is not connected to the network via an Ethernet cable
  Wireless does not work if the printer is connected to the network via an Ethernet cable. Unplug it
  Ethernet cable from the printer.
  1. make sure that the wireless light is on
  If the blue light on the printer control panel is not lit, wireless can be disabled. To turn on the radio, touch
  or drag to the bottom of the tab at the top of a screen to open the dashboard, and then tap (wireless), touch
  (Settings). Tap Settings wireless and then tap wireless to activate it.
  If the blue wireless light is flashing, it means that the printer is not connected to a network. Use the wireless configuration
  Wizard available from the Control Panel printer to establish a wireless connection. Touch or drag to the bottom of the tab to
  the top of a screen to open the dashboard and then tap (wireless), press (settings). Touch wireless
  Settings, tap the wireless configuration wizard, and then follow the instructions on the screen.
  1. make sure that the computer or mobile device is connected to the wireless network
  Make sure that your computer or mobile device is connected to your wireless network. If you cannot connect the
  computer on the network, contact the person who set up your network or the router manufacturer. It could be
  be a hardware problem with the router or computer.
  1. reboot the wireless network components
  Turn off the router and the printer and then turn them back on in this order: router first, and then click Printers.
  Sometimes, disabling devices and then turn their back on helping solve the problems of network communication.
  If you still can not connect, turn off the router, the printer and the computer and then turn them back on in this
  order: router first, then printer and computer

  Still problems? Visit the HP (www.hp.com/go/wirelessprinting) wireless printing Center. This Web site
  contains more complete information and up to date on wireless printing, as well as information to help you
  Prepare your wireless network; solve problems when connecting the printer to the wireless network. and solve
  problems of security software.
  Note: If you use a computer running Windows, you can use the tool HP Print and Scan doctor, which can help
  solve many problems, you may have with the printer. To download this tool, visit www.hp.com/go/tools.

  Hope that helps.

• DeskJet 3052 a: I upgraded my Verizon Jetpack from a MiFi4510 to an EllipsisMHS800L and cannot print.

  I was using a MiFi 4510 jetpack as a router and wifi for the internet and to connect to the HP printer.  I've upgraded to a jetpack Ellipsis MHS800L and now unable to connect to the printer.  What should I do?

  Hello

  For the use of an all-in-one device, you need LAN capbilities, which means a connection to the local network between your two devices the.

  Using the MiFi 4510 user guide, it seems to provide LAN capabilities as limited page 32:

  http://www.Cellcom.com/resources/media/documents/Novatel%20MiFi%204510%20UG.PDF

  However by cheking out the MHS800L care it only seems to offer LTE network capabilities, which means an internet connection to surf the web and not the LAN capabilities to allow devices to communicate between them, which according to the specifications below:

  http://www.verizonwireless.com/Internet-devices/ellipsis-Jetpack-mhs800l/

  I suggest you to check with Verizon, if no LAN capabilities are available, that it will not allow using local devices such as printers, banners, etc.

• PS3 internet connection through my Verizon Wireless card

  I would like to help connect my PS3 to my card from Verizon that works on my laptop wireless. (Dell Windows Vista)
  A detailed description would be great...
  Thx for any help

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  The question you have posted is related to the Playstation. Unfortunately, we can not help with third party software/hardware changes.

  Please contact the manufacturer for assistance.

  http://boardsus.PlayStation.com/PlayStation/

  http://www.us.PlayStation.com/support

  WARNING OF THIRD PARTY SOFTWARE

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Kind regards

  KarthiK TP

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• Re: Verizon JetPack MHS800L "could not resolve DNS address servers.

  I love the JetPack but the main program I work on everything throughout the day inhibits me access.  I reached out to my company, but they are confused.  I have access to the VPN, all other programs, but that, it keeps giving me the "could not resolve DNS address servers.  Any ideas, suggestions, thoughts?  Thank you!

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is watched by other computing professionals who would be more likely to help you.

  TechNet Forum

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information is useful.

• HP Pavilion dv7 1232nr internet connection

  I have a HP pavillion dv7 1232nr. Connects to the verizon jetpack (excellent reception), but does not connect to the internet. It connects with other devices wireless ok and the jetpack works with all my other devices. They do not work together

  Hello

  1. what version of IE are you using?
  2 are you getting any error message or error code when connecting to internet?

  Try the following and see if it helps.

  Method 1:

  Step 1:
  
  Check the proxy server settings are turned on. To do this, try the following steps:

  
  a. disable the proxy on Internet Explorer (IE)
  b. Click Start, type inetcpl.cpl and press to enter.
  c. click on the Connections tab, click the LAN Settings button.
  d. uncheck "Use a proxy server for your LAN" under proxy server.
  e. click ok to apply the changes.
  f. open Internet Explorer and check if the problem persists.

  Step 2:

  
  Try to open IE with no Add-ons and check if it helps.
  
  Internet Explorer Add-ons: frequently asked questions: http://windows.microsoft.com/en-US/windows-vista/Internet-Explorer-add-ons-frequently-asked-questions
  
  
  Method 2:
  
  Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

  See also:

  Setting up a wireless network: http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-wireless-network
  View and connect to available wireless networks: http://windows.microsoft.com/en-US/windows-vista/View-and-connect-to-available-wireless-networks

• Cannot connect to Internet access point except on a Jetpack from Verizon.

  I am running Window 7 Home Premium. I can connect to the Internet using my Verizon Jetpack and nothing else. I tried to use my Verizon phone as a hotspot, I have a router Belkon 4. 1A and we tried through other points of access. It connects to the access point according to the plan, but it is XE offline to the Internet. I tried to update my drivers for wireless devices, and it is said that they are already updated.  I can connect when I'm wired. When I check properties properties IPv4 and IPv6 are shoddy outside. Install is the only thing not frayed on. When click on install, I get an error: cannot add the requested feature. the error is: these data are incorrect.  My wireless adapter is Realtek RTL8187SE Wireless LAN PCIE network adapter. Please help me I am so frustrated.

  Hi Sylvia,.

  I imagine the inconvenience that you are experiencing.

  Here are some ways you can follow to resolve the problem:

  Method 1:

  Check out the link and follow the steps in the article:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2:

  Flush the DNS and request a new IP address of your ISP server by following these steps.
  a. click on start
  b. click on run
  (c) in the Run dialog box type cmd.exe and click OK
  d. in the command prompt, type the following.

  e. ENTER after each new line.
  ipconfig/flushdns
  ipconfig/release
  ipconfig / renew
  output

  Method 3:

  This problem may be caused by incorrect DNS settings. following these steps and check:

  a. click "Start", enter "NCPA. CPL"(without the quotes) and press ENTER.

  b. right-click on the connection you use for the local connection, and then click "Properties".

  c. Click to select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.

  d. in the Internet Protocol window, we will change the "Preferred DNS server" to 208.67.222.222

  e. click 'OK' twice to complete the change.

  If the problem persists, please repeat the steps and change the "Preferred DNS server" to 208.67.220.220.

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Linksys WES610N receive Verizon 4 G Jetpack?

  I need a router that can receive the signal of my 4G Verizon Jetpack so that I can send signals to the items that require a cat5 cable. Can do WES610N or who can?

  I think that WES610N can meet your need. This wireless bridge can extend your network via a wired connection and wireless. The ethernet port 4 port on its back will allow you to connect your devices wired on your network through this wireless bridge. To learn more about WES610N, please visit these links: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=689d24b5a2024ca4bfea0bffadb30ceb_Getting_to_Know_L..., http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=631a0c061e914d7dbf1eecf01fe84e68_Linksys_WES610N_p... and http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=24074.

• Pavilion dv6-3122us: unable to connect to the internet

  With the help of recently installed Verizon Jetpack... which shows on the recording of Control Panel... 2nd HP laptop at home works well. When I ask connection it says not connected even shows if in the record.

  What to do next? Thank you!

  Thanks for your help... ultimately, Verizon has replaced the jet pack. Installed yesterday. So far so good.

• Unable to connect with the MIFI device.

  I have a Verizon Jetpack 890 L mifi device and an older model Dell laptop that is wireless. After spending two hours on the phone with Verizon, finally got the correct IP address for the device to 'connect' with the computer. The States of the computer it is connected to the device, but the device shows that it of just nothing connected to it, have tested the device with a phone and the Xbox and the two front showed connected and functioning with the device. But the computer does not connect to the internet. Help, please!

  The message "the network password needs to be 40bits or 104bits depending on your network configuration. "This may be criteria such as 5 or 13 ascii characters or 10 or 26 hexadecimal characters" means that the system used encryption is WEP (instead of WPA or WPA2).  Although it is the lowest available wireless security, now that I think about it, I'm a little surprised that the mifi comes with a wireless security is enabled.

  There are at least 3 different "passwords" potentially used by your device.

  1. There may be a password that allows the device to connect to cellular service.  As far as I can tell from the manual, it is a "PIN code" that may or may not be required by your cell carrier (i.e., Verizon).  See page 15.

  2. There is a password that gets access to the configuration of the mifi utility.  This is the password that is supposed to be printed on the back of the mifi AND displayed on the LCD when the mifi is turned on.

  3. There may be a password for encryption (or "network key") wireless as the wireless mifi and your computer is configured to use WEP, WPA or WPA2.

  The more I read the manual for this device, I am convinced that the default setting for wireless encryption is 'None' and the password on the back of the device #2 above.  On the other hand, I can't imagine how he could have set himself up for the WEP encryption.

  Here are my latest suggestions.

  1 reset the mifi to factory default.  Beside the decision-making when the power cord is connected is a small button.  With the power on, press and hold this button. The manual says only: "hold."  I would like to keep the button pressed for at least 20 seconds or until there is some indication on the screen that a reset has occurred. You will need a unfolded paperclip to press the button. See http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=50011#alt

  2. make sure that the battery is fully charged.

  3. turn on and confirm that the connection ('up' and 'arrows'), (e.g., 4 G LTE) service and the strength of the signal (bars) are turned on:

  

  4 wait about 10 seconds and then go to "View available wireless networks," find the one that matches your mifi (check to make sure that you do not have a neighbor with a mifi with a similar SSID) and click on connect.  You should NOT be asked for a password.

  5. open a web browser and enter the address 192.168.1.1 OR vz.hotspot in the address box and click GO.  You should see the following text:

  

  6. Enter the password of the sticker on the back of the mifi in the box and click on the button "Login".

  From there, you can follow the manual to configure wireless security settings.  Good luck.

• Full service then no appeal abandoned service cannot connect to the Tower

  Posted to help others:

  I bought an iPhone 6 s it took 3 hours for Verizon connect my phone to my new Verizon account. The phone would display full service bars then, slide an or no service in bars. the phone was finally connected but may 2016 so far I sill experience the same problem of poor or no service call and dropped. Often the phone will not even scream or try to connect to the network.  Apple has replaced the phone 3 x but with no. change my service problems. Verizon and Apple senior level tech support spent to treat 30 + hours on the phone with me trying to solve this problem. We replaced the SIM cards without change. When I put the SIM card in my iPhone 6 it works fine. Full don't signal any calls interrupted and service when roaming. Back in the 6s and no service in the same place. Put the SIM card in the other Iphones not without problem.  If roaming is enabled, phone often it will not conbect to the tower at all. WiFi call is disabled and LTE voice data are on. I've disabled CDMA and data with little or no change with the problem. When iphone 6s loses the service and I toggle airport power phone it will display momentarily full service bars, then the bars one or not, while remaining connected to LTE. In some areas, I can receive calls but can not shout. Sometimes I can txt use data without showing on my plan as using FaceTime and can use the internet. The order indicated above of multiservices to no service happens within 10 seconds repeat throughout the day all areas companies Verizon towers and riaming towers. Verizon finally got the iPhone 6 s to work with full signal across remote I've ever had service, but continue to hamper the not being able to call in roaming. Shortly after that, the phone back to old habits after that they tried to solve the roaming problem.

  After 5 months of no stop calls to Verizon senior level tech supports on September 22, a high tech support tech senior level line finally came to the conclusion after 3 hours of troubleshooting determined it is a software problem Apple 100%. It determined that the phone for a month not was not connected totally to Verizon even if I used it. There to reset the SIM card and the network settings on the phone several times during this period to have the phone drop any connection after initial power that showed a full service then dropped the LTE then, he loses all the bars of service then shows no bar service then no service what so ever in 10 seconds. This was the problem with this phone on the first day.

  He explained that he has heard of what is happening and that Apple is currently working on a solution, but will not be out until possibly October 2016. He also said that this problen is happening now with new models Iphone 7.

  HE then stated that a specific sequence is usually not used must be used to reset the network settings by releasing the bug fix.

  How to restore your device

  1. First of all, back up your device using iTunes or iCloud so you don't lose any personal information.

  Note: If this is the first time that you have saved on iCloud, it may take time for several reasons (speed of Wi - Fi, amount of info on your device).

  2. Connect to iTunes to restore your device. 3. Choose "Set Up as new". 4. Make sure you that you connect to iCloud with your Apple ID so that only your contacts are re-added. Do not re - add photos, music or applications as they can be the source of your problem. 5. Set up your email. 6. Test for the next few days to determine if your problem has been resolved. 7. Restore your backup from iTunes or iCloud.

  Note: If you have a food problem, try to use the recovery mode.

  I hope this helps someone it is to have the same problems. I'm waiting to see if the bug fix works otherwise I'm going to an android phone. It has been too long a process without having a phone that works.

  I have the same problem - it has taken far too much time out of my weekend to try to resolve this problem. In addition, the Apple support person I spoke on the phone was very condescending.

  I've read elsewhere that change the LTE cell Options > Data Only will not solve the problem. So far, this seems to have worked for me.