Wah this is my 5th 4th latop genation

Similar Questions

• 4th generation Apple tv does not see my Apple bluetooth keyboard

  I go into the settings on my Apple TV > Bluetooth and it just sits there looking.  I can't do gets my apple keyboard is displayed.  I can associate the keyboard very well with my phone.

  The 4th generation Apple TV does not support Bluetooth keyboards.

  Use the Bluetooth with your Apple TV accessories (4th generation) - Apple Support

  There are a lot of devices and accessories that you can pair with your Apple TV, as Bluetooth headphones, speakers, and game controllers. Some devices including Bluetooth keyboards are not compatible.

  
  

  A future update is supposed to bring this functionality to the 4th generation Apple Tv.

• Strange behavior of the cursor to the row in the table

  Hello.

  I use JD Studio Edition Version 11.1.1.5.0 on Weblogic 11.1.1.5

  I have page JSPX in taskflow bounded to view history records in the table.

  DB table is simply with a single primary key and number of columns.

  On the page, I show only little of them (Date, user, Rec.Number and State).

  When I open this dialog box with records that hold these documents

  ID	Date	user	RecNumber	State
  67	02.01.07	User1	1	1
  68	02.01.07	User1	2	2
  69	02.01.07	User1	3	1
  70	02.01.07	User1	4	2
  71	02.01.07	User1	5	1
  72	02.01.07	User1	6	2

  I see highlighted records with status = 1. Click on any record highlighting disappears and when I try to move the cursor down through the cursor of the keyboard (arrow keys) Stoops (pressing "down") until that record 3rd then skip (press 'down' key) 2nd record and repeat this. When I try to move the top slider to 5th/4th then folder and back loop.

  When I leave the body of the table and click outside the table then highlighting appears again.

  If I show only records State = 1 then all records are highlighted and the cursor jumps between 2nd and 5th record.

  ADF table is created simply by dragging and dropping of DataControl with RowSelection simple =, rowBandingInterval = 0, filterVisible = "true".

  I can find no reason for this kind of behavior.

  Please help me understand what can be the reason of this madness.

  Thanks in advance

  I check the original Version and compare it with the last good version.

  I found at the end

  This section is missing from the right version

  I add

  and everything is fine now.

  The same problem was in an another PK VO. missing base table.

• Telenet Flanders on AppleTV

  I can't use the YelloTV application that is on my IPad on Apple TV. 3rd generation. There is a message "not authorized connection" and Telenet gave a very stupid answer on that of rights... Is this possible on the 4th generation?

  If they block Airplay due to licensing restrictions, it doesn't matter what the Apple TV model you use, it will be still blocked.

• can I install an SSD on an optical drive in a HP Envy Phoenix

  I just bought a custom HP ENVY Phoenix Desktop - 810-350se CTO with a Raid 5 (3 x 2 TB) configuration, but I noticed and did some research it seems that it's better to have an SSD installed for faster computer access data, of course, I want to use for the operating system installed on it.  So I have two questions?

  (1.) I can change the configuration so that I can add a SSD on an optical drive? (This will be the 4th disc). Since I already use 3 HARD drive on a Raid 5 configuration and there is no more space on the left, I guess I can only use an empty space of optical drive and install a SSD?

  2.) is there a limitation on the number of readers and HARD disk can be installed on the motherboard?

  My proposed solution is to keep the 3 HARD drive and install a 4th disk (SSD) on the optical drive and use it to the operating system (Windows 8.1).

  Recommendations or suggestions is appreciated.

  Thank you.

  3rd generation Intel Core i7-4960 X processor

  •4 TB 7200 RPM SATA 6 G RAID Hard Drive

  Hello

  Your PC is already using a bootloader of Windows 8 and if you load the SSD in UEFI mode, then you will add an another boot loader of Windows 8 for the menu eligible boot device.  This will lead to confusion.  I suggest that you avoid this situation by trying the following procedure:

  1. Don't forget to create the external HP recovery media
  2. Install the SSD on port 1 or 2
  3. Disable startup secure in the BIOS and set the legacy mode
  4. Start the Intel OPROM and rebuild the matrix RAID 5
  5. Boot into the BIOS and UEFI mode
  6. Start the external HP recovery media and load the SSD drive (SSD recommended size is 240 GB or more)
  7. Once you are currently running and then go to disk management and upward and format the matrix RAID like TPG

  The above procedure may or may not work, but that's what I would first try.

• Satellite C850-F31Q - touchpad has stopped working

  This is the 5th time I use my laptop. (Just for 4 weeks now) My touchpad / mouse pad does not work anymore. I tried to install the new drivers, but still no luck. I'm running of Windies 7 and also have a (thankfully) - wireless mouse but it gives also some problems.

  My main concern is that the mousepad on laptop does not work.
  Help, please.

  After reading your ad, it is not easy to say what the problem is here. Who knows what's happening with your touchpad?
  Are you using the original Windows 7 that you got with your laptop?
  You can enable or disable the touchpad by using the FN + F9 key combination?

• HP probook 4530 s device missing base systΦme

  This is my 5th day since I purchased this new HP probook 4530 s [LH313EA #ABV] and I like it, I did a clean install of windows 7 ultimate x 64 and I have just realized that the dose of drivers hp support page does not all drivers for the ultimate version, so I downloaded the proffesional drivers, now I have all devices are installed except two devices named base system device and I see two funds of enable fast web wifi turn on no more after this installation, the quick web background is not functional and the wifi light is still off, please help me

  The hardware ID:

  1 base system device

  PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C & REV_30

  PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C

  PCI\VEN_197B & DEV_2392 & CC_088000

  PCI\VEN_197B & DEV_2392 & CC_0880

  base-2 system device

  PCI\VEN_197B & DEV_2393 & SUBSYS_167C103C & REV_30

  PCI\VEN_197B & DEV_2393 & SUBSYS_167C103C

  PCI\VEN_197B & DEV_2393 & CC_088000

  PCI\VEN_197B & DEV_2393 & CC_0880

  

  Hello

  Download and install the driver for the card reader from the page on the link below.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5060880 & prodNameId = 5060882 & swEnvOID = 4059 & swLang = 13 & mode = 2 & swItem = ob-92295-1

  Kind regards

  DP - K

• Satellite A100 PSAA9C: How to do to record sound played by mixer

  I have a Satellite A100 PSAA9C TA902C. (This is my 5th Toshiba laptop)

  My last was able to do the following: play music written by an author of music, which is through the midi mixing table, and enroll as a wav by Blaze Audio. On the last machine, A25-S279, I was able to select the entry list SW Synth. This console is not available for selection on the A100.

  I contacted Realtek. She was told that this feature is not supported by Realtek ALC861 Audio device installed in the A100 for.
  The last driver has been installed.

  It is very difficult to believe that an edition of media machine has these restrictions. I never met this problem on a computer before.

  What I want is to record from any device. But the system won't let me choose SW Synth. There is on the exit list. Not the entrance.

  Anyone has a suggestion how to record sound played via mixer to a wav recorder?

  Stephen

  What about using a 3rd party application?
  Try to use All Sound Recorder XP I put t know the last version, but try the version 2.28. It s a license shareware and you can test.

• Impossible to find on the site to support satellite P855 - 31K

  Hello world.

  Recently bought a machine to P855 - 31K (PSPKBE) satellite. When problems with discreet
  GeForce GT 630 M arose, went to the Toshiba support site to check some drivers, only to discover that my machine is not listed. Or by entering my s.n., nor try to autodetect, it gives me "sorry, your model could not be found".
  This is my 5th Toshiba notebook, and never had such a problem.
  Guys, maybe someone has an idea of what a devil is it?
  In fact, I could put up with him if it was OK, but that bloody GT 630 M would ' t work at all, either go to BSOD, or running very slow with a lot of objects on the screen, and this directly after the launch of overheating of request-no 3D involved.

  Help, please...
  BTW, warranty online has accepted my serial No.

  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp

  Type of product > Notebook
  Family > Satellite
  Product series > Satellite P Series
  Model > Satellite P855
  Short-term model > PSPKBE

  There you can find all the drivers, tools and utilities for the supported operating systems.

  By the way: do you use the original pre-installed OS that you got with your laptop?

• Field multi

  Hello world

  I am currently working with tiara and I a few beginner questions.

  Call PicLoad ("Template")
  
  Call GraphObjNew ("2D-Axis", "2DAxis1")
  
  Call GraphObjOpen ("2DAxis1")
  
    Call  GraphObjNew("2D-Curve","New_Curve") ' creates a new curve
  
    Call GraphObjOpen ("New_Curve")            ' opens the curve object
  
    D2CChnYName      = ' GroupName/ChannelName.
  
    Call GraphObjClose ("New_Curve")
  
  D2AXISTOP        = 9
  
  D2AXISBOTTOM     = 40
  
  D2AXISLEFT       = 15
  
  D2AXISRIGHT      = 40
  Call GraphObjClose ("2DAxis1")
  
  Call PicUpdate
  
  

  When I copy paste it twice and change the name of the channel, the previous plot is erased by the new route. Would you know how to fix this?

  Also I was wondering how to change the marker. By mouse, it is possible to select the cross-brand but I don't know how to do it by script. The only thing I know is that I should put "Cross" somewhere, but have no idea of the right control.

  Call PicLoad ("Template")
  
  Call GraphObjNew ("2D-Axis", "2DAxis1")
  
  Call GraphObjOpen ("2DAxis1")
  
    Call  GraphObjNew("2D-Curve","New_Curve") ' creates a new curve
  
    Call GraphObjOpen ("New_Curve")            ' opens the curve object
  
    D2CChnYName      = ' GroupName/ChannelName.
  
    Call GraphObjClose ("New_Curve")
  
    Call  GraphObjNew("2D-Curve","New_Curve2") ' creates a new curve
  
    Call GraphObjOpen ("New_Curve2")            ' opens the curve object
  
    D2CChnYName      = ' GroupName/ChannelName2.
  
    Call GraphObjClose ("New_Curve2")
  
  D2AXISTOP        = 9
  
  D2AXISBOTTOM     = 40
  
  D2AXISLEFT       = 15
  
  D2AXISRIGHT      = 40
  
  Call GraphObjClose ("2DAxis1")
  
  Call PicUpdate
  
  

  You can try this?

  Basically, you just want to have a new curve and do not reload the entire model (PicLoad ("Template")) or change an axis (the part with the axis ), so that you do not want to repeat this code.

  4th of July is usually a response slow day on the forum...

  I wonder why... ;-)

• Oscillations in the logic controller output blurred

  Hello

  I recently implemented Fuzzy Logic Controller in Labview 8 for the control of a wide process station. I used Compact Point of field (PDC AIO 110) for it to interface with the hardware. Here are some other details

  Entries to FLC: error, derived from the error of the Signal of the level transmitter

  Fuzzification: Max - Min

  Defuzzification: Center of gravity

  Level sensor: capacitive Type level transmitter

  FCE: Control valve

  Data acquisition: cFP2020, PSC AIO110

  Then, when I run the VI... I am able to control the water level in the tank successfully, but there are oscillations in fuzzy logic controller output. The oscillations are so intense and change very adbruptly. I need to fix this oscillations, as this may damage the equipment.

  I am in need of a solution that makes the controller smooth response... Any suggestions? I need to solve this problem as soon as possible, as the deadline for my project work acad is almost

  PS: I do not know if this post is in the right section, if not please move to the appropriate section. Please let me know I'f I need to provide any additional information

  Thanks in advance

  When you do the (k) e - e(k-1), it's an implementation of the oblique action, actually. You can implement by mistake or by using y (k) - (k-1) there also. This would avoid the effect of set point, when you change the target value, it is a mistake that is used by the derived variable.

  To better describe what I mean, please open the example:

  C:\Program Files (x 86) \National Instruments\LabVIEW 7.1\examples\control\fuzzy\tanks.llb\Tanks - control blur PI.vi

  and try to see the screenshots below:

  1 change the boundaries of your function of members associated with the derivative action will make the answer less susceptive to noise. This is where you should focus on the Fuzzy Editor.

  

  2. the filter function is called: PID control entry Filter.vi and this implements a 5th order FIR filter. If you want more on the filtering option, you would have to use the LabVIEW functions for parsing > Signal Processing > filters. Here's how you should use the FIR filter:

  

  3. the speed limiter is called PID output VI rate limit and it is used as:

  

  These are the options that I was discussing.

• Timestamp in table

  Hello

  I'm using Labview 8.0 and I would like to include a date and time stamp that every time the data is collected, and this as a 5th column in the final table.  I inserted a generator of random numbers instead of devices so it would be easier to understand and test.  I'm new to Labview and have never created a date stamp / hour before.  Any help or advice would be appreciated.

  Dave

  Here is a version 8.0

• Too often activation required - WHAT hardware change requires reactivation?

  This is the 5th time I have to activate my Vista 64, the third time using the phone system.

  Install-> Activate (normal)
  Switch from IDE to AHCI Mode (+ updated drivers from AMD): reactivate, is not that I like it, but good...
  Updated AHCI driver: reactivate, this time by phone
  Cloning HARD drive to the new HARD disk (S.M.A.R.T. prefail) system: reactivate over the telephone once again, getting annoyed by the beast «on how many computers...» "question.
  Update driver today still: reactivate over the telephone once again, getting more annoyed by the beast «on how many computers...» "question.

  Vista 64 is WAY TOO HYPERSENSITIVE when it come to request reactivation.

  What exactely to material changes to or driver do Vista want to reactivate?

  Is it possible to NOT require reactivation?
  What will I do if activation fails and pleasant phone system or the Lady tells me "installed on computers too", even if it is installed on a computer?
  If you want me to illegally licensed in volume of open e (available due to my work) to avoid this inconvenience, Vista 64 me closer to do it even if I bought it normally.

  Set

  Setsunaaa,

  Product activation Microsoft detects configuration values of the material where the product is installed and creates values of hash for this configuration.

  Product activation can tolerate a few changes in the hardware configuration by allowing a hash value of current to have a difference of the hash value that is initially enabled.

  If the hard disk is reformatted and the software is reinstalled, reactivation is required. Same for the activation grace periods apply to this situation.

  Common changes to hardware, such as the mise a niveau video card, adding a second hard drive, adding RAM, or upgrading a CD-ROM drive, do not require the system to be reactivated. Specifically, Product Activation determines tolerance through a voting mechanism. Ten hardware characteristics are used to create the hardware hash. Each characteristic is rated as a voice, except the network card. The network adapter is rated as three votes.

  When you think about tolerance, thinks that what has not changed, instead of what has changed. The current hardware hash is compared to the original hardware hash, seven or more points must match for the two hardware hashes to be considered in tolerance. If the network card is the same, only four additional features must match, because the network card is worth three, for a total of seven. If the network card is not the same, seven characteristics other than the network card must be the same.

  If a component is changed one day, and then another change is done the next day, two changes are counted. The changes are cumulative. However, if a user is asked to reactivate, the hardware profile is reset to the new configuration.

  Even if it's embarrassing, if you are in the guidelines of the EULA, reactivation on the same computer can be performed as many times as necessary.

  Please see the following link for more details about the activation process.

  http://www.Microsoft.com/Windows/Windows-Vista/quick-start/activation-FAQ.aspx

  <><><><><><><><><><><><>

  Please report your results so that we can help you. Please use the community support for Microsoft Vista.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Istalling failure when the plant is 99% (Laserjet Pro cm1415 cold)

  This is the 5th time I try to install the program for my new cold Laser Jet Pro cm 1415 and installation reaches 99% it stucks where for avout 3-4 minutes and then I get the following message is displayed:

  "An installation operation took too long to run. It is a use of the fatal errorpreventing product. Restart your computer and run Setup again. "If the problem persits, please check the product site web fo your product."

  I even downloaded the installer from the web site, in case that the disc was defective, but still the same message.

  Any ideas? Anyone?
  Thank you in advance.

  There is no scrubber for this Laserjet Printer as there is for some printers inkjet and Laserjet printers. This means that you must to clean manually. Uninstall everything that deals with the printer's software. Once you did, go through the files on your hard drive and get rid of those dealing with the printer. Finally, use a record cleaning tool to clean any registry key that may be stored in the registry. Once you have all that done, try to reinstall it. Let me know what happens.

• problems on a Dell 1525

  My dell 1525 shuts down the other day and now it does not start up... keeps going into the start of repair system and then can not solve the problem. Then asks me if I want to report the problem. Well yes I would if he could start up... the advice on what to do?

  or is the only option left to perform a full system restart and then reinstall all my drivers... which I can't remember how to... While saying that this will be the 4th reconstruction for this laptop and the desire to be the 2nd rebuild in less than a month

  Hi Puffind,

  Perform a restore of the system from the Windows recovery environment (WinRe).

  a. boot from the DVD
  b. Select the language
  c. click on "Repair your computer" on the install now screen
  d. click Next in the System Recovery Options screen
  e. click on system restore.
  f. follow the instructions on the screen.

  How can I fix a startup (startup)?

  Bindu R - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.