Wrong frequency is simulated

Similar Questions

• My data file trace the wrong frequencies in MWO

  I'm plotting a S parameter file, but frequencies in my chart do not match the frequencies in my file.

  Sometimes when you try to plot data files (let's say the measured data) against the results of simulation, you get unexpected results.  This coming do not select the right frequencies to the extent.

  When you add a measure to a graph there is a selection of default frequency, but you can replace it.  The extent of dialogue for this field is inside, as shown here:

  

  by pressing on the ' > ' to the right of the Freq Sweep field, you can see that there are two selections of possible frequency for the file for the data file.

  • Document is a list of the frequencies in the actual data file
  
  
  • Project is the list of frequencies in the frequency list of the projects and those who most probably used by your schema.

  If you try to plot two different measures against each other, you'll want to make sure that you have defined two measures on the same bandwidth.

  Another thing to watch if you are using a data file with a small number of frequency inside points is the interpolation method.  We have a knowledge base article that explains how to select an interpolation method and the trade-offs.

• S10-2: wrong frequency. ACPI Table error [solved]

  Hello world.

  I am happy owner of a S10-2 with a processor Atom N280 running at 1.66 GHz in WinXP. However, Linux (Kubuntu 9.04 and 9.10, as well as other distributions) maximum CPU clock is 1.33 GHz. Here is the output of cpufreq-info:

  cpufrequtils 005: cpufreq-info (C) Dominik Brodowski 2004-2006                                                                               Report errors and bugs to [email protected], please.                                                                                   analyzing CPU 0:                                                                                                                               driver: acpi-cpufreq                                                                                                                         CPUs which need to switch frequency at the same time: 0                                                                                      hardware limits: 800 MHz - 1.33 GHz                                                                                                          available frequency steps: 1.33 GHz, 1.07 GHz, 800 MHzm  available cpufreq governors: conservative, ondemand, userspace, powersave, performance  current policy: frequency should be within 800 MHz and 1.33 GHz.                  The governor "ondemand" may decide which speed to use                  within this range.  current CPU frequency is 800 MHz.  cpufreq stats: 1.33 GHz:0.00%, 1.07 GHz:0.00%, 800 MHz:0.00%  (16821)analyzing CPU 1:  driver: acpi-cpufreq  CPUs which need to switch frequency at the same time: 1  hardware limits: 800 MHz - 1.33 GHz  available frequency steps: 1.33 GHz, 1.07 GHz, 800 MHz  available cpufreq governors: conservative, ondemand, userspace, powersave, performance  current policy: frequency should be within 800 MHz and 1.33 GHz.                  The governor "ondemand" may decide which speed to use                  within this range.  current CPU frequency is 1.33 GHz.  cpufreq stats: 1.33 GHz:0.00%, 1.07 GHz:0.00%, 800 MHz:0.00%
  

  When I start the machine with the kernel parameter acpi = off CPU runs at 1.66 GHz. But this isn't a solution as a laptop computer without ACPI is completely useless.

  The problem is obviously a mistake in the BIOS ACPI table who deceives the core to think that the maximum speed is 1 .33GHz.

  There is also an Ubuntu bug describing the problem more in detail:

  https://bugs.Launchpad.NET/Ubuntu/+source/cpufreqd/+bug/422858

  Anyone watching similar behavior?

  I would be very interested in any type of solution workaround or information on how to contact Lenovo and ask a fixed BIOS.

  Best

  
  

• Issue frequency RAM on CQ50 series

  I have a pretty good knowledge of memory speeds when it comes to computers, but even I have a question about a specific memory. Maybe someone out there knows the answer.

  My question is what is causing my main ram to laptops run at DDR2 - 667 mhz. I know for a fact it is PC2-6400 and is able to operate at an external speed of 800 mhz DDR2, but it won't. The default ram to 667 mhz no matter what I do.

  The BIOS was my first choice to change this setting, but as usual the BIOS is locked.  Note to HP, you guys need to stop locking sections of the advanced features of the BIOS. This is a killer of the real deal for any future project, that I had to purchase more HP/Compaq computers. Not to mention the limitations, he puts on the system in general, in other words, it has a * beep * move on your part.

  The system in question is the HP Compaq CQ50 and I modified it with updates of the game. Mainly changed the single core celeron 575 for a Core2Duo T7500 processor. The processor runs at a nominal speed of 800 mhz FSB and chipset GL40 says it supports up to bars of memory DDR2 800 mhz.

  As for the memory, the system has had 2 gb (2x1gb) sticks to 667 mhz and I swapped those out for newer DDR2 800 mhz sticks (2x2gb) for a total of 4 GB. I was disappointed when then start the system and check cpu id to find the speed of the ram was the same, there was just more of it.

  They are adapting sticks purchased at the same time and are registered as PC2-6400 (400 mhz), manufactured by Ramaxel technology with part RMN1740EF48D8W-800 number. Shot of another HP computer.

  Which component on the system board is causing the RAM down the clock like that? I begin to suspect that the BIOS is the culprit because there is no advanced options, or really anything of use in there. Just, I want the memory runs at the expected speed, is there anything we can do about it?

  System information:

  Name: Compaq Presario CQ50 103WM (its been updated since the installed equipment factory)

  Processor: Intel Core2Duo T7500 2.2 Ghz 6 MB cache FSB 800 mhz (original was core Intel Celeron 575)

  Memory: 4 GB of DD2 at 800 mhz (operating at 667 for unknown reason) (has 2 GB of ddr2 667 orginially)

  Graphics card: integrated Intel Mobile 4 series (GL40 Chipset) (also a serious bottleneck, and probably why the ram runs at the wrong frequency)

  Operating system: Windows 7 Ultimate x 64 sp1

  This seems to be the revelant information that future readers will have. If need more information I'll post on request. I feel there will be little or no help here, but I have to try. Otherwise no one would know that the question is there.

  Hello:

  This is not the info I've seen since the specifications of the Intel chipset on the link below... Max is at 667 MHz.

  http://Ark.Intel.com/products/35501/Intel-82GL40-graphics-and-memory-controller-hub

• Use Loader() to display the image in the Simulator?

  Hi all

  This is a very specific question: it seems that the Flex Hero Loader() class does not work when loading an image file in the Simulator.

  When to use flash.display.Loader to load and display an image file,

  It works fine when run on emulator Burrito, but nothing appears when running PlayBook Simulator (the image file is accessible on the Simulator: I can see his name and size)

  Anyone know if something is wrong with the Simulator and Loader()?

  Thank you.

  Same problem with the Image of QNX,

  the problem is on the URL, which should include "file://".

  as described in your solution here:

  http://supportforums.BlackBerry.com/T5/Tablet-OS-SDK-for-Adobe-Air/view-image-from-applicationStorag...

  Thank you.

• Trouble getting GPS coordinates in the Simulator

  Here is the code I use to get the coordinates of the GPS by train. It seems that every time that it expires and ends by 0 for the latitude and longitude of return even if I put together a location in my simulation-> GPS location... window and entered in the Options-> advanced-> GPS-> was cool my main application class, this function is called by a button.

  public void GetCurrentLocation() {         Criteria ct = new Criteria();            //ct.setAddressInfoRequired(false);          //ct.setAltitudeRequired(false);         ct.setCostAllowed(true);        ct.setHorizontalAccuracy(Criteria.NO_REQUIREMENT);        ct.setVerticalAccuracy(Criteria.NO_REQUIREMENT);        ct.setPreferredPowerConsumption(Criteria.POWER_USAGE_LOW);        //ct.setPreferredResponseTime(10000);        //ct.setSpeedAndCourseRequired(false);
  
          try {            myLP = LocationProvider.getInstance(ct);            myLP.setLocationListener(new myLocListener(this), -1, -1, -1);        } catch (Exception ex) {            return;        }    }
  
  public void GotLocation(Location myLoc) {        if(myLoc != null) {            QualifiedCoordinates qc = myLoc.getQualifiedCoordinates();            //Call webservice here.        }    }
  

  In the myLocListener.java

  package net.gasbot;
  
  import javax.microedition.location.*;
  
  public class myLocListener implements LocationListener{    GasBotScreen gb;
  
      public myLocListener(GasBotScreen gb)    {        this.gb = gb;    }
  
      public void locationUpdated(LocationProvider provider, Location location)    {        QualifiedCoordinates qc = location.getQualifiedCoordinates();  //I set a breakpoint here, but it rarely gets called, and when it does, the coordinates are both 0.        provider.setLocationListener(null, 0, 0, 0);        gb.GotLocation(location);    }    public void providerStateChanged(LocationProvider provider, int newState)    {
  
      }}
  

  Can you get it someone please let me know what I am doing wrong? I'll put the listener null once it gets a set location to update as I need it only once. I also tried to use the.getLocation(-1) and it does not work either. Is there something wrong with my Simulator? Or just something wrong with my code?

  I don't understand your code, in fact.  Why are reset you the listener inside the listener?

  In addition, you "eat" the exception where you get the provider. He is a likely area of failure, so I would put a trace and trace any exception.

  Another thing to try: try to set criteria to null when you get the provider: gives you the provider "by default".

• Buggy Simulator torch?

  Hello

  Is something wrong with the simulator of the torch? I have an application that listens to the incoming and outgoing calls using the PhoneListener and I test this code on OS 6. I dial a number, green button to call and then net_rim_bb_phone_app Gets a NullPointerException on ActivePhoneScreen (Screen) .onDisplay (line 4125). Just like that. My callInitiated() is not yet known.

  I also get a crash when a simulating a call. I get the crash after I managed callConnected(), so the call is coming, I press the green button to answer and BOOM!

  Another thing: If the call alert sounds are set to 'all alerts off' then MediaPlayer.isSucces (line 713) Gets a MediaNativesEception. I managed to work around that one by alert settings sounds for silent.

  Any ideas?

  The 6.0.0.141 Simulator have that bug you described (with the call).  The first call cause this exception indiferent if you have connected the receiver or not, if you hit continue (several times), after that it will work (average of the second call). Download the 6.0.0.246 in this Simulator bug was

• Satellite Pro P300: external resolution 1024 x 768 instead of 1680 x 1050

  Hello

  I run my Sat P300 on XP and this laptop screen is fine (1440 x 900 pixels on radeon HD 3650).

  Now, I want to connect the laptop to an external monitor flat screen, a Samsung, which requires an optimum resolution of 1680 x 1050 pixels.
  The samsung monitor works fine on my laptop more old: I close the lid of the laptop and the screen changes to the Samsung with good resolution of 1680 x 1050.

  Now, when I connect the P300 and close the lid, the screen switches to the Samsung, but the actual screen resolution is 1024 x 768, despite the fact that the 1680 x 1050 is set in the display properties windows.
  In fact, the screen is probably 1680 x 1050, but sees only the monitor 1024 x 768 (i.e. the desktop is bigger than the monitor can show, and I can push the office left/right or up/down with the mouse.

  So it appears (Hey, it's just a guess) that the radeon sends a screen 1680 x 1050 with the wrong frequency (48.2 KHz instead of 64.4 KHz as my monitor watch)!

  The Samsung drivers are installed, and I've updated the BIOS to 3.40 win, but not a solution.

  Someone at - it an idea?

  Hello!

  Have you checked the manual of the Satellite Pro P300?
  I think you should do this because there you can read why the screen resolution of 1680 x 1050 doesn t work.

  The Satellite Pro P300 supports the following screen resolutions:
  800 x 600
  1024 x 768
  1280 x 800
  1280 x 1024
  1600 x 1200
  1920 x 1440
  2048 x 1536

  Do you not see where is the problem? ;)

  Good bye

• T440p and external display

  I'm having a problem find Lenovo T440p with HD4600 and Eizo S2100 work as an external display. I was able to get it work only with resolution 1240 x 1024 however monitors maximum is 1600 x 1200.

  The operating system is Windows Pro 8.1.

  Connection between these two is via a Dock Pro and DVI - D cable.

  I've tried 5 different drivers of Lenovo and Intel, but not luck.

  

  Any suggestions?

  Hi vacancies,

  the latest drivers directly from Intel has solved my problem.

  You should try it too. The release date of this driver is 20.11.2013 and version no. 15.33.8.64.3345 (10.18.10.3345).

  According to my information to support Eizo was a problem with the wrong frequency for this resolution.

  Kind regards
  Matus

• A pulse counter 6008/6009

  I have three flow meters of FPR133 I am trying to display in LabVIEW.

  I have attached a document containing all the technical characteristics of the flow meter. But the range is 0.5 to 5.0 GPM (25 Hz to 225Hz).

  During programming, I was able to generate a signal on a frequency generator (simulating a flow meter) and was able to install labVIEW to measure the frequency. Everything seemed fine.

  When I hooked the real flowmeters data acquisition is not read any signal? Currently the black wires of the flowmeters are connected to the (-) supply 10V and the MASS on the side of digital data acquisition. The red wires are connected to (+) supply 10V. The white wires go directly to P1.0, P1.2, P1.1.

  I returned and tried again the frequency generator and it still works. It seems that flow meters send a signal 'dirty '?

  Offset CC gives me questions? Do I need a coupling AC capacitor?

  OR

  I also noticed in the specifications of flow meter that he they suggest a resistance to drop 5-10 k between the black and white wires. Is it necessary with the acquisition of data 6009 I use? I know there's a resistance to pull-up 4.7 K internally.

  OR

  I have a problem with all my reasons tied together (analog, digital, (-) Supply, AC 10V, pregnant...)

  Any ideas would be greatly appreciated. I can provide more information if necessary. I will work to solve this problem all day. Thank you!

  Try to use the pull-down, but more important is the question that you are using to power the meter with 10V.

  The output of the meter signal will also be 10V which exceeds the specifications for digital inputs (~ 5V).

  Then feed the meter with a 5V source.

  -AK2DM

• Digital modulation

  How to multiply random digital waveform model with waveform sine in order to get ask modulation scheme

  wire-LEEP

  You can watch these:

  http://LabVIEW.NI.com/docs/proposals/6.1/HTMLHelpProposal/HTML%20Conference/Webhelp/LvwaveMultiply_W...

  You can also convert from DDT and then multiply directly with the multiplication VI using the same number of samples. Remember also that the multiplication of waveform must have the same ' dt? This means that, with different frequency and simulated signals will not work. I hope that this gets you going

• Mock Exam

  I noticed that there is more wrong with the simulated exam questions. Who can I speak to this topic? Also, I hope that the review will not reflect these same bad questions. I got a 69 on my first attempt, and I'm rather nervous about to re-take the test.

  You can contact me about the review of the model.  And Yes, the issues of the review of the model would not in the real test.

  Jon C. Hall

  Technical developer certification

  Office: 727-446-8430

  Mobile: 727-460-8448

  http://www.VMware.com

  mailto:[email protected]

• Use the value of the field in the User parameter

  Using the Report Builder 10.1.2.3.0
  
  My query is select col1, col2, col3 from myTable
  My user setting is "p_myparam" and the data field by default f_data1 source is zero.
  The f_data1 field is displayed in the same extensible framework that col1, col2, col3.
  My attempt was to create a trigger BEFORE the REPORT with the following text:
  
  If: col2 = 'MYVAL' then
  : p_myparam: = "I want to assign to this parameter of Some Text";
  end if;
  
  The error I get is REP-1316: before the outbreak of report refers to the "RECPT_TYPE" column to wrong frequency.
  
  How can I do this?
  
  Kind regards
  Max

  Another possibility would be to create a formula of columns within the group where col1, col2 and col3 are placed and do something like

  If :col2 = 'MYVAL' then
     RETURN 'Some Text I Want To Assign To This Parameter';
  else
    RETURN NULL;
  end if;
  

• Report formatting question

  Hello
  
  I ran into an interesting problem with a report that I've created. My layout consists of 5 repeating frames within an extensible outdoor setting. I want to do is hide the EXTERNAL frame, if ANY of the internal frames contain data. I tried some approaches so far, but none succeeded.
  
  First I tried to change the trigger of format for the outside frame to watch one field of each of the inner images, but this resulted in a "REP-1314: Format trigger"R_1"made reference to column wrongly xyz frequency.
  
  Then I tried simply to create a column placeholder in the parent group and update in the format of each of the inner images triggers. This is not as well and gave rise to a "REP-1323: cannot contain output columns in the format trigger"R_2".»
  
  Are there any other suggestions? Thanks in advance.
  
  Edit: Another thing I tried was creating a cursor for each inner frame using SRW. GH_CREATE in the outer frame trigger setting in shape and then by looking at the first value of each inner frame and returning true if something was found in any of the frameworks. This approach is much too slow (and I'm not even sure it works)
  
  Published by: user11219365 on June 19, 2009 09:39

  You can use analytical columns. They are created in the group above the one you synthesize. If you get the error message on the wrong frequency reference

• Sampling frequency of HAVE is incorrect for simulated ENET-9213, WLS-9213, and USB-9213

  Hello

  ENET-9213, WLS-9213 simulation and devices USB-9213, I'm able to correctly get the sampling frequency of I = 1351 samples/s using DAQmxGetDevAIMaxSingleChanRate, which is incidentally on the value of spec'ed of 1200 s/s.

  However, when I create a task and add a voltage channel and then HAVE the sampling frequency of the task of query, I get a sampling rate of only 9 samples/s. I tried the same code with other devices and I get the sampling frequency corresponding to the device data sheet, it seems THST this problem is limited to 9213 devices.

  Why sampling returned by the task using DAQmxGetSampClkMaxRate rate returns than 9 s/s.

  And why the rate of conversion of DAQmxGetAIConvRate only 18 s/s.

  I enclose the test code which may be used to reproduce this problem.

  Kind regards

  whemdan

  The MathWorks

  Hello

  When I tried this with a USB-9213 simulation, I used the Sample clock Max Rate, as well as the Rate.vi of AIConvert:Max property node.  I could see that for 1 channel, I could spend up to 675.67/s, and I couldn't for 16-channel get79.49S/s (which total is equal to 1271 S/s, which is in the specifications).  The multichannel and single channel, I could get an AIConvert Max Rate of 1351.35.

  Something that could happen is that you do not explicitly set this device runs in mode high speed.  You'll want to set the property Get/Set/rest AI_ADCTimingMode channel at high speed, and you should see much better results in this way.

  Something else to note - I use DAQmx 9.0