wait for effective

Similar Questions

• Message "waiting for the printer to be available."

  Whenever I try to print my Laserjet 1300, I see a message in the queue, asserting, "Waiting for printer to be filled."  He treats ever.  I delete the job, try again but the same result.  As a result even for some simple text, PDF, or .jpg files.  However, I can print a test directly from the Laserjet 1300 printer page.  Restarted computer and printer restarted without effect.  Am able to print correctly on my HP Deskjet F4180 backup.  Use a MacBook Pro OS 10.6.6.  All software updates have been made.  Thoughts?

  OK, we're going to fix the permissions:

  1. open Finder: Applications > utilities > disk utility.  Open it.

  2. Select your Macintosh HD on the left side, and then click permissions for the Repari drive along the bottom.

  3. let it finish (20 minutes or more), and then close disk utility.

  Reset the printer - I don't know how to do this.  Turn off the power and unplug the wall for 15 minutes?

• CREATE INDEXES online is waiting for the TX = 4 mode

  Hello

  I have a strange blocking problem where an INDEX CREATE LINE is waiting for a transaction that did only inserted a line in the parent table.

  Wait is mode TX = 4 (not TM locks) and I currently have it reproduced only on 11.2.0.3 and 11.2.0.4

  Easy to replicate the schema SCOTT:

  Session 1:

  SQL > set time on

  14:54:58 SQL > insert into SCOTT. Dept (DEPTNO, dname) values (50, 'test');

  1 line of creation.

  Session 2;

  14:55:24 SQL > create index test on SCOTT. EMP (ename) online;

  It's waiting ' enq: TX - line lock conflict ":"

  SQL > select sid, chain_signature from v$ wait_chains where blocker_is_valid = 'TRUE '.

  SID CHAIN_SIGNATURE

  ---------- ----------------------------------------------------------------------

  603 ' SQL * Net client message' < ='enq: TX - line lock conflict '

  While waiting to acquire the lock of transaction in mode 4:

  SQL > select * lock gv$ where sid = 603

  INST_ID SELECT ADDR KADDR SID TYPE ID1 ID2 LMODE CTIME BLOCK REQUEST

  ---------- ---------------- ---------------- ---------- ---- ---------- ---------- ---------- ---------- ---------- ----------

  1 00000006CDA05EB8 00000006CDA05F10 603 352577 0 4 0 348 2 AE

  1 00000006CDA06078 00000006CDA060D0 603 DL 779505 0 3 0 308 2

  1 00000006CD9FABE0 00000006CD9FAC38 603 DL 779505 0 3 0 308 2

  1 00007F28001F5028 00007F28001F5088 603 779505 0 2 0 308 2 TM

  1 00007F28001F5028 00007F28001F5088 603 779510 0 4 0 308 2 TM

  1 00000006CD9FA240 00000006CD9FA298 603 779505 0 4 0 308 2 OD

  1 00000006B4F26790 00000006B4F26808 589847 711499 6 0 308 2 TX 603

  1 00000006CDA0ED68 00000006CDA0EDC0 655377 996169 0 4 308 TX 603 0

  I've traced 10046 and 10704:

  broadcast message = obj 29231196672 #= 779514 tim = 1447251053634045

  ksqgtl * mode TX-000f001e-000ad97c = 4 flags = 0 x 10001 timeout = 21474836 *.

  ksqgtl: xcb = 0x6bb322528, ktcdix = 2147483647, topxcb = 0x6bb322528

  ktcipt (topxcb) = 0 x 0

  ksucti: init logon has of txn DID:

  ksqgtl:

  ksqlkdid: 0001-003F-0000AFC4

  ksudidTrace: ksqgtl

  ktcmydid(): 0001-003F-0000AFC4

  ksusesdi: 0001-003F-0000AFC3

  ksusetxn: 0001-003F-0000AFC4

  ksqcmi: TX, f001e, ad97c mode = 4 timeout = 21474836

  2015-11-11 15:11:36.566

  WAITING #140700792578680: nam ='enq: TX - line lock conflict ' ela 42932082 name = | mode = 1415053316 usn < < 16 | location = sequence 983070 = obj 711036 #= 779514 tim = 1447251096566283

  And there is nothing in V$ SESSION leader/block/line current. class obj # is EMP. current sql_id is the CREATE INDEX.

  If anyone has an idea on:

  -Why creating an index in line must wait for transactions that modified only parent table

  -How to continue the investigation

  -can or cannot reproduce in other versions

  Thanks in advance,

  Franck.

  I guess you have a constraint foreign key between emp and Dept.

  It's expected behaviours: since 11.1 any DML at one end of a referential integrity constraint translates into a mode lock 3 taken at the other end, and your phenomenon resembles a side effect of this.

  When you try to create the index online that your session must assume that the other session (holding mode 3 on the emp and dept) may have changed the emp and dept, so it must wait for the session to the commit or rollback.

  (I guess that in principle, he could walk the cancellation of the transaction see if EMP had in fact been changed - but maybe who was considered too complicated to be worth the risk to implement)

  Concerning

  Jonathan Lewis

  Updated - I just did a quick check to reproduce the effect on 11.1.0.7

  For reference - here are a few notes on modes of locking and how the application has changed over time: https://jonathanlewis.wordpress.com/2010/06/21/locks/

• Waiting for redo log file missing when restore main database using RMAN backup that was taken on the database physical standby

  Here's my question after tons of research and test without have the right solutions.

  Target:

  (1) I have a 12.1.0.2 database unique main enterprise 'testdb' as database instance running on the server "node1".

  (2) I created physical standby database "stbydb" on the server "node2".

  (3) DataGuard running on the mode of MaxAvailability (SYNC) with roll forward in real time 12 default c apply.

  (4) primary database has 3 groups of one-man redo. (/oraredo/testdb/redo01.log redo02.log redo03.log)

  (5) I've created 4 standby redo logfiles (/oraredo/testdb/stby01.log stby02.log stby03.log stby04.log)

  (6) I do RMAN backup (database and archivelog) on the site of relief only.

  (7) I want to use this backup for full restore of the database on the primary database.

  He is a DR test to simulate the scenario that has lost every primary & Eve total servers.

  Here is how to save, on the database pending:

  (1) performance 'alter database recover managed standby database Cancel' to ensure that compatible data files

  (2) RMAN > backup database;

  (3) RMAN > backup archivelog all;

  I got elements of backup and copied to primary db Server something like:

  /Home/Oracle/backupset/o1_mf_nnndf_TAG20151002T133329_c0xq099p_.BKP (data files)

  /Home/Oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.BKP (spfile & controlfile)

  /Home/Oracle/backupset/o1_mf_annnn_TAG20151002T133357_c0xq15xf_.BKP (archivelogs)

  So here's how to restore, on the main site:

  I clean all the files (data files, controlfiles oder all gone).

  (1) restore spfile from pfile

  RMAN > startup nomount

  RMAN > restore spfile from pfile ' / home/oracle/pfile.txt' to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';

  (2) modify pfile to convert to db primary content. pFile shows below

  *.audit_file_dest='/opt/Oracle/DB/admin/testdb/adump '

  * .audit_trail = "db".

  * full = '12.1.0.2.0'

  *.control_files='/oradata/testdb/control01.ctl','/orafra/testdb/control02.ctl'

  * .db_block_size = 8192

  * .db_domain = "

  *.db_file_name_convert='/testdb/','/testdb /'

  * .db_name = "testdb".

  * .db_recovery_file_dest ='/ orafra'

  * .db_recovery_file_dest_size = 10737418240

  * .db_unique_name = "testdb".

  *.diagnostic_dest='/opt/Oracle/DB '

  * .fal_server = "stbydb".

  * .log_archive_config = 'dg_config = (testdb, stbydb)'

  * .log_archive_dest_2 = "service = stbydb SYNC valid_for = (ONLINE_LOGFILE, PRIMARY_ROLE) db_unique_name = stbydb'"

  * .log_archive_dest_state_2 = 'ENABLE '.

  *.log_file_name_convert='/testdb/','/testdb /'

  * .memory_target = 1800 m

  * .open_cursors = 300

  * runoff = 300

  * .remote_login_passwordfile = "EXCLUSIVE."

  * .standby_file_management = "AUTO".

  * .undo_tablespace = "UNDOTBS1.

  (3) restart db with updated file pfile

  SQLPLUS > create spfile from pfile='/home/oracle/pfile.txt'

  SQLPLUS > the judgment

  SQLPLUS > startup nomount

  (4) restore controlfile

  RMAN > restore primary controlfile to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';

  RMAN > change the editing of the database

  (5) all elements of backup catalog

  RMAN > catalog starts by ' / home/oracle/backupset / '.

  (6) restore and recover the database

  RMAN > restore database;

  RMAN > recover database until the SNA XXXXXX; (this YVERT is the maximum in archivelog backups that extends beyond the scn of the backup of the data file)

  (7) open resetlogs

  RMAN > alter database open resetlogs;

  Everything seems perfect, except one of the file log roll forward pending is not generated

  SQL > select * from v$ standby_log;

  ERROR:

  ORA-00308: cannot open archived log ' / oraredo/testdb/stby01.log'

  ORA-27037: unable to get file status

  Linux-x86_64 error: 2: no such file or directory

  Additional information: 3

  no selected line

  I intended to use the same backup to restore primary basic & helps record traffic and the downtime between them in the world of real output.

  So I have exactly the same steps (except STANDBY restore CONTROLFILE and not recover after database restore) to restore the database pending.

  And I got the same missing log file.

  The problem is:

  (1) complete alert.log filled with this error, not the concern here

  (2) now repeat it in real time apply won't work since the Party shall LGWR shows always "WAITING_FOR_LOG."

  (3) I can't delete and re-create this log file

  Then I tried several and found:

  The missing standby logfile was still 'ACTIVE' at present RMAN backup was made.

  For example, on db standby, under Group #4 (stby01.log) would be lost after the restoration.

  SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;

  GROUP # SEQUENCE # USED STATUS

  ---------- ---------- ---------- ----------

  4 19 ACTIVE 133632

  5 0 0 UNASSIGNED

  6 0 0 not ASSIGNED

  7 0 0 UNASSIGNED

  So until I take the backup, I tried on the primary database:

  SQL > alter system set log_archive_dest_state_2 = delay;

  This was the Group of standby_log side Eve #4 was released:

  SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;

  GROUP # SEQUENCE # USED STATUS

  ---------- ---------- ---------- ----------

  4 0 0 UNASSIGNED

  5 0 0 UNASSIGNED

  6 0 0 not ASSIGNED

  7 0 0 UNASSIGNED

  Then, the backup has been restored correctly without missing standby logfile.

  However, to change this primary database means break DataGuard protection when you perform the backup. It's not accept on the production environment.

  Finally, my real questions come:

  (1) what I do may not do on parameter change?

  (2) I know I can re-create the control file to redo before delete and then recreate after. Is there any simple/fast to avoid the standby logfile lost or recreate the lost one?

  I understand that there are a number of ways to circumvent this. Something to keep a copy of the log file waiting restoration progress and copy up one missing, etc, etc...

  And yes I always have done no real-time applies "to the aid of archived logfile" but is also not accept mode of protection of production.

  I just want proof that the design (which is displayed in a few oracle doc Doc ID 602299.1 is one of those) that backs up data backup works effectively and can be used to restore the two site. And it may be without spending more time to resume backups or put the load on the primary database to create the database before.

  Your idea is very much appreciated.

  Thank you!

  Hello

  1--> when I take via RMAN backup, RMAN does not redo log (ORL or SRL) file, so we cannot expect ORLs or SRL would be restored.

  2nd--> when we opened the ORL database should be deleted and created

  3rd--> Expecting, SRL should not be an issue.we should be able to do away with the fall.

  DR sys@cdb01 SQL > select THREAD #, SEQUENCE #, GROUP #, STATUS from v$ standby_log;

  THREAD # SEQUENCE # GROUP # STATUS

  ---------- ---------- ---------- ----------

  1 233 4 ACTIVE

  1 238 5 ACTIVE

  DR sys@cdb01 SQL > select * from v$ logfile;

  GROUP # STATUS TYPE MEMBER IS_ CON_ID

  ---------- ------- ------- ------------------------------ --- ----------

  3 /u03/cdb01/cdb01/redo03.log no. 0 online

  /U03/cdb01/cdb01/redo02.log no. 0 2 online

  1 /u03/cdb01/cdb01/redo01.log no. 0 online

  4 /u03/cdb01/cdb01/stdredo01.log WATCH No. 0

  /U03/cdb01/cdb01/stdredo02.log EVE 5 No. 0

  DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log

  method: cannot access the /u03/cdb01/cdb01/stdredo01.log: no such file or directory

  DR sys@cdb01 SQL >! ls - ltr /u03/cdb01/cdb01/stdredo02.log

  -rw - r-. 1 oracle oinstall 52429312 17 Oct 15:32 /u03/cdb01/cdb01/stdredo02.log

  DR sys@cdb01 SQL > alter database force claire logfile 4;

  change the database group claire logfile 4

  *

  ERROR on line 1:

  ORA-01156: recovery or current flashback may need access to files

  DR sys@cdb01 SQL > alter database recover managed standby database cancel;

  Database altered.

  DR sys@cdb01 SQL > change the database group claire logfile 4;

  Database altered.

  DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log

  -rw - r-. 1 oracle oinstall 52429312 17 Oct 15:33 /u03/cdb01/cdb01/stdredo01.log

  DR sys@cdb01 SQL >

  If you do, you can recreate the controlfile without waiting for redo log entry...

  If you still think it's something is not acceptable, you must have SR with support to analyze why he does not abandon SRL when controlfile_type is "underway".

  Thank you

• "Wait for user Input" GIF

  Hello!

  I don't want to start the animation GIF automatically, loading the home page. How can I solve this: I wish that the GIF start animation when I click on the image. How can I do this?

  Where can I find the option "wait for user input" is photoshop?

  Thank you very much!

  Hello

  Greetings,

  • Whence the gif begins to play automatically, you talk about your web server where you downloaded.
  • Either way, I doubt that there is an option "in waiting for user input" in Photoshop.
    • You can create an action to do this, but then it will be effective only within Photoshop (if that's what you're looking for)
  • You can also create a script, check out these links below for more details
    • Stop the automatic playback of your Gifs
    • http://StackOverflow.com/questions/5818003/stop-a-GIF-animation-OnLoad-on-mouseover-start-l'activation

  Concerning

  Rohit

• I5-650 upgrade to i7 - 875 or wait for Ivy Bridge-E to be released?

  Then, when I bought my current motherboard, my upgrade path has been my i5-650, which is quite slow, to an i7. I've been waiting for a while for the price to drop on the i7-875, but they remain still at the 350-$ 400 (US) level. I like the i7-875 because it has unlocked. I have a Noctura C12P cooler, I initially intended to buy a unlocked i7 and overclock a little. Unfortunately my i5-650 has no an unlocked multiplier. I knew that when I bought it, but at the point where I expected to be able to upgrade the processor in the year. I did not yet as I used to be an editor very novist - now I'm at an intermediate level and my slow processor has really started to bother me.

  However, now I think that it would be better to wait for the Ivy Bridge-E, which from what I've read so far, should be a processor 8-core complete. This will allow me to take advantage of the four memory channels (my i5 only supports dual channel), a better CPU socket as the 2011, much more big cache on die CPU itself and of course the 8 cores that will be 4 times the physical cores that I have now. I'll also be able to update my motherboard if I leave with a new processor, which would be nice because my EVGA P55 THE limit myself to only 16 GB of memory, 4 x 4 gigs. When I built my rig, two years ago, 16 concerts seemed to be quite similar. Now, I know that I need 32 or maybe 64, so I need a motherboard that offers 8 DIMM slots - mine has only four.

  I'll have to wait about a year or two, depending on when Intel finally released Ivy Bridge-E, but I'm OK with it if it means a significant improvement in my render times. Now that I'm loading individual clips with many effects, color correction, etc... I see a lot more red in my calendar and I'm tired of waiting for the previews made and so I can back to work.

  Any thoughts on the Ivy Bridge-E and its release date, etc...? All I can find is that it is delayed until the third quarter of 2013, which is nearly a year away, but if the new format of 22nm chip is worth the wait, I will be willing to wait rather than take an intermediate step and then spend again in less than a year...

  Thank you!

  The upgrade should be based on what makes more sense than your workloads. From this moment you can already buy a motherboard Socket 2011 as there dropping in support of 8-processor Core (they are already avaiblible under the line of Xeon from Intel that is supported on the boards as the WS P9X79 which work as well consumer CPUs (Sandy Bridge (E). The difficult situation you're is you pushcaeed a platform that had a quick u-turn socket wise so upgrade has become limited and the cost of the CPU for the platform.

  At least with the 2011 Socket which is not goin anywhere any time soon. Ultimately, you must make the call whether to move your Board and CPU currently to something that will provide a significant increase in performance as a X 79 part of card with even the quad core (3820) or wait to get a piece of 8 native hearts which is already avaiblible with references of Xeon. Do not forget that there is a cost of considerble delta by adopting a 8 on the side of Intel processor.

  I hope this helps. Enjoy the rest of your day!

• Wait for the entry?

  Hi all
  
  I need to create a custom entry dialog box and the problem I encountered is that I can't figure out how to make my request to wait for the user to complete the entries in the framework. When you use a JDialog or JOptionPane application will stop running and wait for the dialog box to close. My question is how to do something similar without using a JOptionPane or JDialog. I just can't figure out how to get the same effect by using a JFrame or other component. I know I could just use a JDialog or JOptionPane to get input from the user, but I'm just curious to know how I can stop running and wait for the entry as the JOptionPane allows you to do, but without using a JOptionPane or JDialog.
  
  Thank you for your help :)
  Nathan D.
  
  -----
  : Edit:
  I forgot to mention that the reason main I avoids JDialogs is I need the entry dialog box to be internal not external application I use mode exclusive fullscreen. And a JOptionPane does not allow me to add the other components too it such as JLabels and other GUI. I just need a way to get input from a component or internal window and wait for the entry as a JOptionPane or JDialog.
  -----
  
  A NBS are:
  
  

  import java.awt.event.*;
  import java.awt.*;
  import javax.swing.*;
  
  
  
  public class Main extends JFrame implements ActionListener {
  
      /**
       * @param args the command line arguments
       */
      public static void main(String[] args) {
          new Main();
      }
  
  
      JButton go = new JButton("Show custom input dialog");
  
      public Main() {
          setSize(300,150);
          setLocationRelativeTo(null);
          setLayout(new FlowLayout());
          go.addActionListener(this);
          add(go);
          setVisible(true);
      }
  
      public void actionPerformed(ActionEvent e) {
          InputDialog d = new InputDialog();
  
          /*
           * Here is the problem it is necessary that I create a
           * custom input dialog to allow further modifications however
           * i'm not sure how to wait for the user to enter text and press
           * continue in that input dialog. Unlike JOptionPane the code executes
           * before the user presses continue. My question is how do I wait for the user
           * to press continue in the InputDialog before I call d.getString(); without making the main
           * application unresponsive.
           */
  
          String returnValue = d.getString();
          System.out.println("return value "+returnValue); //will be null or empty because application doesn't wait for input.
      }
  
  
      class InputDialog extends JFrame implements ActionListener {
          JTextField f = new JTextField();
          JButton go = new JButton("Continue");
  
          public InputDialog() {
              setTitle("Custom Input Dialog");
              setSize(300,150);
              setLocationRelativeTo(null);
              setLayout(new FlowLayout());
              f.setPreferredSize(new Dimension(100,25));
              go.addActionListener(this);
              add(f);
              add(go);
              setVisible(true);
          }
  
          public void actionPerformed(ActionEvent e) {
  
          }
  
          public String getString() {
              return f.getText();
          }
      }
  }

  Published by: neptune692 on January 3, 2011 13:25

  neptune692 wrote:
  .. a JOptionPane does not allow me to add the other components too it such as JLabels and other GUI. ..

  Of course, it does!

  import java.awt.event.*;
  import java.awt.*;
  import javax.swing.*;
  
  public class DumbNameMain extends JFrame implements ActionListener {
  
      /**
       * @param args the command line arguments
       */
      public static void main(String[] args) {
          new DumbNameMain();
      }
  
      JButton go = new JButton("Show custom input dialog");
  
      public DumbNameMain() {
          setSize(300,150);
          setLocationRelativeTo(null);
          setLayout(new FlowLayout());
          go.addActionListener(this);
          add(go);
          setVisible(true);
      }
  
      public void actionPerformed(ActionEvent e) {
          JTextField f = new JTextField(10);
          JButton go = new JButton("Continue");
          JPanel p = new JPanel(new FlowLayout());
          p.add(f);
          p.add(go);
          JOptionPane.showMessageDialog( this, p );
  
          String returnValue = f.getText();
          System.out.println("return value "+returnValue);
      }
  }
  

• Stuck "waiting for the printer to be available."

  After initially looking at it's going to print, the printer dialog box displays "waiting for printer to be available" and it's there (even if the printer - inkjet HP series C3800 - is ready).

  Here is what I tried:

  Using the HP utility software on the same computer, I am able to successfully print a test page, which rules out a problem with the printer and its connection to the computer.

  Printing worked normally before moving on to the Sierra. I tried resetting the printing system and add new printer (Sierra recognizes very well). I also tried to run in case disk utility have a permissions problem.

  I'm stumped at this point. Help much appreciated.

  Same story, but with a HP Laserjet P3005dn, specific scenario, the exact symptoms, exact attempts to improve...

• Hi8 thru cam HDV into FCP 7: waiting for timecode

  Hello

  I have a bunch of Hi8 tapes I want to capture on the drive by running through Sony CCD-TR400 on the Canon HV - 20 MBPro & FCP 7.

  I can see the execution in the window capture, but when I hit capture now it gets no further than "Waiting for time code."

  I guess the Hi8 analog, but hoped the Canon with its AV > DV option would treat his way through.

  Any ideas?

  Is the only way to do this would save on tape dv on Canon HV-20 and then capture the disk?

  The best

  Elmer

  Hi8 uses only consumer re-writable (CCFC) timecode that is not readable by the PCF.  In the FCP capture settings, set "Device Control" device not controllable and then use Capture now capture rather than in batches.

  -DH

• "waiting for encrypted google" does not allow me to open a Web site

  When I try to open lifenews.com, which I visited many times, there is a message saying left down "waiting for encrypted google." I don't even use google chrome? I don't know where to go to get rid of it, I don't want nothing blocked unless I specifically ask to be blocked. I did the research, said it's a blur, said another security settings to uncheck the ssl2 and ssl3. Nothing works. Can someone tell me please how to remove this thing waiting for encrypted google.

  You said blur, which is an add-on. Use the blur, or any extension of similar content filtering? If you think one of them might be the problem, you can test Firefox Safe mode. It is a standard diagnostic tool to disable extensions, hardware acceleration, and a few other advanced features of Firefox.

  Does not work if Firefox: Hold down the SHIFT key when you start Firefox.

  If Firefox is running: You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  and OK reboot.

  Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).

  Any improvement?

• iMessage is stuck at waiting for Activation.

  Hello

  I have iPhone 6 Plus with iMessage stuck waiting for activation. May that what's wrong with it? These are the work with other vendors if I insert the sim card. Is it something to do with the question SMS relay or something else?

  Need help to solve my problem.

  Thanks in advance.

  If you get an error when you try to activate FaceTime - Apple Support or iMessage

• How long should you wait for your apple account unlock

  How long should you wait for your apple account unlock?

  of > If your identifier Apple is locked - Apple supports

  ...

  When you see one of these alerts, you can go to iforgot.apple.com to unlock your account with your existing password or reset your password. After multiple unsuccessful attempts to unlock your account, your identifier Apple will remain locked and you can try again the next day.

  ...

• Extend my extreme network with another extreme - waiting for internet access

  Hello - I have a new generation Airport Extreme (let's call it Extreme1) connected to a Comcast modem and it works very well. The extreme will be the router that the modem has no router function. I'm trying to expand my network to another room with another extreme (let's call it Extreme2). I have a connection cable between two rooms. Extreme1 has an ethernet cable from one of its LAN ports connected on port WAN Extreme2. When I try to create a new network with Extreme2 (in aid of the same name, passwords, etc.) it does not work. He was suspended at the end when he is looking for a connection ("Waiting for internet access")-I did the following things based on what I read here:

  1. Changed IPv6 link local parameters
  2. Tried the whole upward on my Macbook and tried on my iphone
  3. The Wan first and then tried to change the configuration after you done for Extreme2 by creating a network
  4. Tried to create a network with Extreme2 connected directly to the modem
  5. Extreme2 factory reset after every attepmt

  And nothing works. Kicker is, I also have a reasonably new airport express and the same thing happens to her as well.

  Do I need to adjust some parameters of network that I'm not aware of? Is it possible that my LAN ports are disabled on Extreme2? It is brand new.

  Thanks for any help.

  Have you used the Apple Setup Assistant?  If you did, it had notified you that the extreme second was being configured "add using Ethernet. The wizard will automatically configure the second airport with the appropriate settings for you.  All you have to do is enter a name of device for the second AirPort Extreme.

  Here I'm assuming that you reset the second extreme to parameters by default until you set it up again and that your second Extreme is the current version of the "tower" or that of previous versions "flat or square.

  The example below shows an AirPort Express as the device which is the extension of the network, but you will see the name of your network and AirPort Extreme on your configuration screen.

  Post back if you need some tips on using the "Wizard" for your configuration.

  

• photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  can I do or just wait for someone to fix it

  photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  is there anything I can do or just wait for someone to fix it?

  If you want any help here, you'll have to tell us what the error message.

  Which report you errors to?

• iPad 4 blocked mode recovery, itunes waiting for ipad

  I've had my IPad for over two years now and it worked great. But yesterday it just no longer lights. I don't know weather it auto-updated or not, but it became all black. I tried to reload, but the screen remains black after hours of load. The combo of home button and lock 10 seconds also does nothing. I plugged into my Macbook so and tried Itunes. ITunes says "ITunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes. «So I press ok and restore the iPad, software is extracted and it said "Waiting for iPad...» "for a minute. The next thing is the error message ' the iPad could not be restored. An unknown error occurred (4005). "I tried several times with different cables and USB ports... I don't know what to do anymore.

  I'd be happy for something useful!

  You can try the DFU mode

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

  If this does not help

  An appointment of 'Genius' to an Apple Store, or select another authorized service provider.