waiting for (wireless) network error in Windows xp

Similar Questions

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• Satellite Pro L450-13 q (PSLY1E) - XP driver for wireless network card

  The system has Windows 7 pre-installed and has Windows 7 recovery DVD.
  I searched online and found that some packages also include Windows XP Professional as a downgrade.

  This was not included in my package, I received.

  I managed to get most of the drivers for XP, including graphics and sound card.
  But at the present time, I have not been able to locate the driver for the wireless card.

  Can anyone help?

  Thank you very much... Mark

  Hi mate,

  I think that you should look for the Toshiba WLAN drivers WLAN Portal:
  http://APS2.toshiba-tro.de/WLAN/

  Normally you will find all the drivers for wireless network cards in all laptops Toshiba so it s worth a try! ;)
  Moreover, what WLAN card you have exactly?

• dv6810us don't Scan for wireless networks

  I have a Pavilion dv6810us notebook running Vista Home Premium. It has the Atheros AR5007 wireless card. There are ten days, he stopped searching for wireless networks. I can only connect to a wireless so I manually enter the SSID and password in manage wireless networks. The connection to a network screen displays the message, "Windows cannot find any additional network." The box at the top right of the screen does not work. The last day, I was able to find wireless networks was at a Starbucks in New York on 29 October. Help, please. Thank you.

  Please do not hold account that last response. I did a Google search and found at www.wefi.com. It works! Thanks a lot for your help. I like the fact that the software gives you a list with icons that tell you if a hot spot is protected or not, so you can see at a glance. Nice work and 1 million thanks!

• DHCP is not enabled for wireless network

  Hi all

  I have problems with internet connection and a large part of the time, that Network Diagnostics says Windows "DHCP is not enabled for wireless network", then it solves a problem, but I lose the connection several times a day, and each time that do the same fix again.

  I checked the Device Manager settings and DHCP is started and set to automatic, I also ran CMD > ipconfig/all and can paste the results if need be.

  I use a VPN and never had any prior issued connection with it and it seems to be just as hard to connect if the VPN is enabled or disabled.

  Also recently I got the "security defender" virus which has been deleted successfully, the next day of the day it has been deleted, all network cards have messed up, I uninstalled and reinstalled them but that didn't work so I restored my system and that seems to fix the problem, my computer does not seem to run as fast after the virus as before so I wonder if it has an impact on my current problem.

  I use a Toshiba Satellite Pro 660D and Windows 7.

  Hello

   

  Thanks for choosing Microsoft Community. However the question you posted should be better on the TechNet forums. Please post the question here:

   

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

   

  Don't answer if you need assistance, we will be happy to help you.

• NO wireless network connection - message "Windows could not find a certificate to connect to the network Shaida. How to fix this problem?

  I had just restored my Thinkpad T60 the default setting. Reformatted and reinstalled Windows XP, but I am unable to connect to the wireless network connection - message "Windows could not find a certificate to connect to the network Shaida.

  Shaida is my wireless modem.

  How to fix this problem?

  Before the resumption of connection Internet worked normally.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/870702

  It will be useful.

• Try to install the update for win 7 error code windows service install could not be accessed

  I can't indtall a program

  Try to install the update for win 7 error code windows service install could not be accessed.  Insatller Windows is not installed correctly.

  Try to make sure that the Windows Installer service is running, or force start it.

  1 open run and type services.msc, and then press ENTER. You can also go
  to the Panel of control-> Administrator Tools-> Services.

  2. in the installation list services, locate Windows Installer.

  3. check that the status is started. If the condition column is empty,
  Right-click Windows Installer, and then select start.

  4. If you get the error trying to force starts the Windows Installer service,
  try to change the Startup Type to automatic (default is Manual), then
  Restart the computer.

  You can also give the following a try, make sure that you back up your Windows registry database before you try:

  7 How do I backup the registry in Windows

  http://blog.thinksharp.nl/2009/03/08/WindowsInstallerHELLOnVistaX64PlatformsAlsoFixesITunesInstallProblem.aspx Change of the

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSIServer\WOW64 key from 1 to 0 got my install iTunes work.

• Unable to print on a wireless network, error message: required user Intervention

  Original title: print over wireless network

  I get an error that says user Intervention required. I'm on a wireless network and just upgraded to Windows 7 on my XP desktop. printing worked well previously. How to cross this error?

  Hello

  1 did you change on your computer before the show?

  2. What is the number of brand and model of your printer?

  This error occurs generally when the print job goes into a State on hold; the printer is to work offline or pause printing mode.

  Follow the steps mentioned below:

  Method 1: Restart the print job

  a. Click Start, click Control Panel and then double-click Printers.
  b. double-click the icon of the printer (not the Fax icon if present) of the product. A window opens with a list of tasks currently assigned to the printer printing.
  d. click the first document in the list and then click printer. If there is a check mark next to suspend printing or use printer offline, click to remove the check mark.
  e. If the page does not print, click on the Document and then click on restart.

  If the problem persists, follow the next method

  Method 2: Clear the print queue and restart the computer

  a. Click Start, click Control Panel and then double-click Printers.

  b. double-click the icon of the product. The queue window opens.

  c. If all documents to be printed are waiting, click on cancel or Purge print jobs/documents.

  d. restart the computer.

  For reference:

  On Windows 7, a WSD print job cannot be completed if the Windows client does not have a subscription to the printer

  http://support.Microsoft.com/kb/2308557

  Network printer problems

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-network-printer-problems

  If you use tracking printer HP article below:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00113719&LC=en&cc=us&DLC=&product=79505&rule=9322

• Unable to connect to wireless networks more. ("Windows could not connect to (SSID)")

  Hello!

  Something very strange is happening with my laptop (dv6-3060ee). Up to this day at noon, everything worked well, including the wireless network. So, I set my computer to Hibernate and came to the House of my parents. As I turn it on and try to connect to the wireless here, I can't. I get this error "Windows could not connect to (name of the network).

  I'm on W7 Home Premium 64-bit and the card wireless in an Atheros 9285 b/g/n (model number can be a problem, I have it does not properly check).

  Things to consider:

  -I don't know that this is not a router problem or hardware WiFi card because:

  1. I can connect to the router and get internet access on my phone and with the other computer normally.

  2. on the laptop, I can not connect to the network without wire inside W7, BUT with HP QuickWeb (this system of Opertaing before loading windows), I can normally connect to the network and access to internet.

  -Have you ever tried, without success:

  1 reinstall the driver for the wireless card / Unistalling the driver and install it again

  2. change the encryption on the router. (Even with no encryption I can't connect)

  3. of course, restarting the computer, turn off/on of the network card, reset the router

  So, I'm sure it's a problem with Windows. I did some research here and in other places and other people seem to have the same problem, but I couldn't find any solution.

  I didn't install any software today which could cause conflicts.

  So, can someone help me, please?

  Thank you

  Thank you for your help, but I'd already sorted.

  The problem was really the driver, an update had been installed by the HP update program and it makes the device stop working. This problematic driver was March, I can't remember the version number.

  I went to the Device Manager and pressed on "Roll Back Driver". Windows restored to an October/2009 driver, 8.0.0.238 version number, and now it works as it should.

• V40 HP on office xp and is shared via the wireless network. laptop with windows 7 will not be printed on v40.

  Cannot print from laptop (windows 7) via the wireless router desktop (windows xp) with attached usb HP v40 .for all-in-one.

  (7) - wireless laptop router - desktop (xp) - usb - HPv40

  Has worked for laptop is running xp.

  Laptop of the coils of print job at the office and apparently complete, but the bureau simply ignores the print job.

  No error message.

  printing from office very well.

  I reported this as resolved. I submitted this problem. The problem started when the update of my laptop computer from Windows XP to Windows 7. When I did, the Lexmark printer to my desktop worked find with the new system of the laptop. The HP V40 has failed. The Office has just received each print job submitted from the laptop (via a local wireless network) and scrapped it. I could see the print job come in the V40 print queue and could disappear.

  Here's what I did to solve the problem:

  I tried a dozen or so combinations of withdrawal and installing the printer on my Windows 7 laptop and my Office Windowx XP (with the V40 attached via USB) and manually removing and installation of printer drivers on my desktop PC, it works finally. What have I done? I have no idea, but I think that deleting manually pilots v40 on the office was part of the solution. While view printers available on my XP desktop computer, I clicked on file and one of the tabs has led me to a place where I could remove the drivers for each printer (I just removed them for the V40).

  Here's what I DIDN'T DO:

  I'm not following the advice of the HP support person I contacted by phone. This Board had to reinstall Windows XP on my desktop. That clearly was not the problem when I talked to him. But he would NOT listen to reason. Luckily I have enough knowledge to know PC than its low of false tips

  I am pleased with the resultant availability of the V40 again.

  I have no idea how to officially close this problem.

  I would be happy to discuss with someone else who has a similar problem, but when I submitted this problem with my name and email address, the moderator has deleted my presentation of the problem. Therefore, I think that all those who want to know more is out of luck.

• Cannot configure 7410 for wireless network

  I have a 7410 that I hooked up to a cable for several years but have just moved my office and need to set up a wireless network. Modem, router and computers are fine, but the printer does not have a wireless option, even if it is a wireless printer. I went to the help section and saw that I needed to hit the installer, 8 and 4, that is not problem, except in the network menu, I have only 1, 2 or 3.

  Does anyone know where is my 4 (wireless configuration)?

  Return to the Ethernet cable option - your Windows machine will complain of limited connectivity, but it's OK.

  Once your computer gets an IP address (it will be in the form 169.254.x.y), then open web page internal printer by accessing its IP address.  Select network, wireless (802.11) and then advanced.  Activate the wireless link and click on apply.

  If you do not find the wireless section of the 7410 internal web page, then your printer is ignored and is not a radio.

• Wireless network error (do not turn) even I did it?

  Hi, I turned ON my network without wire (with the switch on my laptop). No connection was detected (a cross has been posted in the signal bar). After that I did the 'repair' it not show my wireless network was not turn ON. I'm confuse or some conflict in the system?

  Help please! Thanks in advance...

  Hello

  Please contact Miceosoft answers.

  First, go to start-> type of performance information and tools-> click on Enter. In the window, click on "view and print detailed performance and system information. Windows that can be opened, access the network category. Search for the words WLAN or WiFi. Note the name.

  Then, go to start-> type devmgmt.msc-> press Ctrl + Shift + Enter. Click Yes if prompts UAC. In the window, go to Nwtwork adapters, expand it. Now, look for the name shown here. Select and double click it. In the window, under device status, if it is referred to as "this device is working properly", try retsrting the PC and if this fails, try updating the driver.

  If any other message appears as "the unit was able to start" or any other message, try updating the driver. If that too fails, contact the manufacturer, may be it will need replacement.

  See you soon.

• Unable to connect to the wireless network WPA2 in Windows 7 with Dell E6400

  Hello

  I've spent almost a week to find the following problem with one of my laptops:
  Laptop Dell Latitude E6400
  CPU Intel Core 2 Duo T9400 2.53 GHz
  Memory 4 GB
  OS Windows 7 SP1 32 bit Home Premium
  Card WiFi Dell Wireless 1397 WLAN Mini Card
  Intel 82567LM Gigabit Network Connection Ethernet card

  With the wireless configuration (Ethernet is unplugged), my E6400 sees the Motorola SBG 6580 wifi router using WPA2, but when I try to connect to this router (with WPA2 password) I got the error message:
  Windows could not connect to myrouter.

  I've updated all the drivers with the latest version and I still have the same error message.

  I have another laptop Dell E4300 under Windows 7 SP1 32 bit Home Premium and I can connect to the Motorola router without problems.

  Do you have ideas of how to solve this problem?

  Thank you

  I had this problem with my new Dell 1545 & wireless 1397 card, but it was some time ago. The utility Dell WiFi was, it turned out, interfere with the management of the windows of the WiFi card. There was also a problem of compatibility with versions of driver and I had to keep the driver to the version Windows offered two years ago. You can read about it at low signal wireless Dell Inspiron 1564 laptop 1397 WLAN Mini card , but do not forget that it was some time ago, it's with another model of Dell & that no router was involved.

  You can also try asking Dell support, but I never had any help from them at all, despite the request.

• Blue screen of death or :( Your PC has encountered a problem and needs to restart. We are only collecting the error information, and then we'll restart for you. Error on Windows 8

  I read my threads where people are facing this error blue screen dead on Windows 8, the cases are different but this error message is the same, I share picture of the error message, it looks like this.

  

  My case

  In my case when I turn the laptop for the first time it freezes, displays this error message and restarts normally. On the home screen, it shows me a message send this problem to Microsoft. Laptop works very well subsequently without any problem, even if I reboot later it loads fine, but if I stopped and starts from at the moment, it shows same error screen. When I look into the details, it shows me these details. draw the image.

  

  I did it as a result of things to understand the issue:

  • I thought it's a software problem, so I format my windows disk and reinstall Windows8 - the issue has not been resolved.
  • One of my friends suggested me for a complete format, I moved my data to external HARD disk, formatted my entire drive, deleted partitions, make new partitions and installed Windows 8 - the issue has not been resolved.
  • Someone suggested from material with my HDD to check it out, so I used a different HARD drive, formatted, deleted partitions, made new partitions and installed Windows 8 - the problem persists.
  • Restore all settings to the default BIOS - the problem persists.
  • I have connected HDD my friend with Windows 7 to check my machine and it worked fine.

  In my research, I can't understand what is really the cause of this accident, there would not be any software parameter or virus as on formatting windows that all this problem would have been solved. It is not the HARD drive for sure as I have done everything I know to see if it's the HARD drive that is causing the problem.

  Dear members and experts from Microsoft, this is the first time I participate on this forum and think that I explained everything concerning the problem I face and the research I did to solve this problem, I eventually failed, please guide me how I can solve it. My laptop is out of warranty and I don't want to pay for something that I do not know exactly.

  Waiting for your expert advice.

  Frébault

  These related to the amd_sata.sys AHCI Advanced Micro Devices 1.2 device driver. Update to win 8.1 should solve this problem.  If it isn't, you should check for motherboard update update BIOS and drivers.

  

• Waiting for SP1 to come through Windows Vista update?

  Hello:

  I have been waiting for SP1 to make an appearance through Windows Update and am still waiting. I checked the knowledge base and checked all problem drivers to see if I had any of the components.

  I don't have one of them, nor I have hidden updates that I chose to not not to install. Is there anything else that I could possibly check? I checked all my drivers in Device Manager, and all are updated.

  Thank you!

  Hi guys

  I think you should check Microsoft's own article on this topic:

  * + Is not available for installation from Windows Update and is not offered by automatic updates of Windows Vista Service Pack 1. + *
  http://support.Microsoft.com/kb/948343

  There are various reasons why the SP1 cannot be received through the automatic update.

  Good bye