Wake on Lan p HP TouchSmart 520-1000it and HP TouchSmart 610-1120it

Similar Questions

• HP Touchsmart 610 1120it headset microphone does not work

  Since the webcam microphone is too far and I can't always speak in tones of normal voice (at night for example), today I bought a headset FIRST of the trust, but when I connect the headset microphone remains active webcam microphone. I tried to change the default and default communications device, but does not detect anything of the microphone. In addition, rather than be written "Ready" is "not available", as well as the stereo mix.

  Any sloution?

  (I tried the microphone on another pc and it works)

  

• Wake on LAN - AirPort Extreme

  I'm trying to configure the Wake on LAN for my AirPort Extreme and Windows 7 PC, reboot with my iPad.  It works fine when the iPad is on the local network, but no power on the PC when I'm not on my network domestic.  I put airport to the port before 9 to the PC as directed, and made sure the PC has been configured to accept magic packets.  Any help?

  Apple wake on lan system is different... and there is a good chance the router from Apple not go to work.

  The best and easiest around the issue is to install a different router... and use airport extreme for the wireless. Make sure the PC is connected to the main router although no airport.

  http://www.Neowin.NET/forum/topic/1186835-wake-on-LAN-WOL-with-Airport-extreme-2 013 /.

• Wake On Lan for Pavilion 500-046

  I have been using Wake On Lan on my other computers to wake up computers on my network that have been closed using the Windows 7 shutdown command. This is a very useful feature for me, and I would like to make it work on my computer HP Pavilion Desk Top with Qualcomm AR8161 PCI - E Gigabit Ethernet control. The Bios on the 500-046 has this option, and I put it to ACTIVATE. I am running Windows 8.1 update on the Pavilion. I, moreover, looked at other possible power in Device Manager settings, but I'm not having any luck getting it works. There is absolutely no response from the Pavilion when a wake on LAN signal is sent. A similar question has been posted by me a few days there are no answers. Maybe and Expert could give it a whirl. Thanks for any help.

  Hello fredkoch3,

  I read your post about how you have problems to wake on LAN issues with your desktop computer, and I'd be happy to guide you to a resolution!

  To start, I recommend that you follow this thread on ' Wake on LAN ' (WOL) behavior in Windows 8 and Windows 8.1. This should help explain how (WOL) is used for Windows compared to Windows 7 8.1.

  To find out if your system can be configured for Wake on Lan, I suggest a command "powercfg' running on your computer. This will check the power management features available. To do this, please follow the steps in the following procedure:

  1. Press and hold the Windows key and the R button simultaneously
  2. Type the word cmd in the box provided
  3. In the command prompt window, type the command "powercfg - availablesleepstates.
  4. Here you can compare the available sleep States using the document States supply system to see if (WOL) is available.

  Reference: http://msdn.Microsoft.com/en-us/library/Windows/desktop/aa373229.aspx

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• Wake On Lan doesn't work 640 ProBook

  Hello!
  
  I am trying to configure wake on LAN on laptop ProBook 640 G1, but it does not work
  
  I configured the BIOS settings and also tried different magic packet WOL tools with no luck. I have already updated the BIOS to the latest available version. Also I tried various BIOS settings, but it simply doesn't.
  
  I read the various messages with some advice (as configuration options of Windows drivers, also put my laptop in standby mode, the standby modes available with the POWERCFG command verification) but still I can't make it work.
  
  I tested my network using a utility to check if my phone is received the magic packet and network is fine.
  
  I already work with Wake On LAN function in another HP laptop and it works fine. The problem is with this new model (I have 2 new laptops and it does not work in any of them).
  
  Hope someone can help me.
  
  Thank you in advance!

  Hello!

  I solved my problem.

  The origin of the problem is the way in which Windows 8 turns off your computer.

  If I run the "shutdown-s" command to CMD then I can start my computer with magic packet WOL.

  But if I use the option stop with the mouse, then I can't.

  I had to disable the hybrid boot in my windows, so it's no more a problem. I found there is a command to do this:

  ' bcdedit/set disabledynamictick Yes.

  Now it works fine.

• Enabling Wake-On-LAN?

  Hello

  Does anyone know how to enable Wake-On-LAN on a HP Pavilion Touchsmart Sleekbook 14-b141sa?

  I can't see it in the BIOS.

  Any help would be appreciated.

  Hello

  I also checked a few units, and I don't think that the options are available in the BIOS for you to enable

• Wake on Lan for a Mac Mini running Leopard does not

  Don't know where to best this post, but here's.  I'm trying to set up a Mini as a server of music for my audio system.  The Mini is a core 2 duo with 1 GB of RAM of 2009 I think.  Can I upgrade to Snow Leopard (possibly Lion/10.7 if I improve memory, what can I do anyway).  The mini is on a local network using a Netgear router and is only connected through wifi.  No ethernet.  The Mini is connected to a DAC by USB, and which is connected to the audio system.

  I want to run this without screen and keyboard and rely on my iPhone or my MBAir to control the Mini via screen sharing.  I want to leave the Mini sleep don't no need then to wake up when I want music.  Problem is, I can't get the Mini to wake up.  I tried the Wake on Lan and other tools of waking distance so I can start playing the music, but I can't seem to wake up.

  I have the correct MAC address and IP address (I booked a local IP address for him).  I'm sure that the two computers are on the same network.  I put the Mini to wake on lan in energy saver prefs.

  Any suggestions?  Thanks in advance!

  Hi, I have not 10.5 available now and just ask...

  In Sys Prefs is the Mini on Wake for administrator access? (Can't quite rememer what pref pane is in.)

• 800 G2: 2 800 all-in-one, wake on lan to PXE but not hard

  I have a problem with 18 800 2 all in UNITS. I can easily start none of them using wake on lan but, they all want to PXE boot. Nothing I've tried to change in the BIOS has made a difference. I need to start Windows.

  Any suggestions?

  Dan

  @Dan2495

  Go to the BOOT options in the BIOS.

  Uncheck the option of network (PXE) boot.

  Then go to the Options of integrated device.

  Value Wake On LAN for a hard driver start.

  REO

• Satellite P200-18Z: How can I do wake on LAN?

  How can I make WoL work on this computer.
  I enabled it in bios, but I can't even wake my phone to another device.
  I am running windows 7 ultimate, if this material.

  Thank you

  Hello

  You can wake up on LAN laptop if you run a query to a service that is running on the laptop.
  But you cannot wakeup the laptop if you access a data or similar
  You will need special software that send a magic packet.

  Check the Wake On Lan tool. Its freeware and you can download this from different pages

• Satellite C660 - how to activate and use WAKE ON LAN?

  Hi all

  Previously, I posted asking about the use of Wake on Wireless LAN and was very helpfully informed that it was impossible, so I started to explore the Wake ON LAN option.

  I have a Toshiba C660 PSC0LE-00500JEN and helped Wake ON LAN in the BIOS and have connected a LAN cable between my router and the laptop, which recognize each other, if the cable looks ok.

  However, if I use an app to WAKE ON LAN on my android, or I use a site online "wake on lan via browser ', the laptop stay asleep.

  Can someone advise?

  Thank you

  James

  Hello

  Wake Up on Lan option would work if send you a magic packet to the remote machine (laptop).

  I have no experience using the Android app, who knows if it works properly

  Try the other method. For example, using software such as wake on Lan for Windows (GUI) graphical user Interface

  Google for it to download this software.

  In addition, go to the device-> LAN card Manager-> properties-> Advanced tab and check here if the WOL is activated too

• M3 short life battery for wake on LAN

  Is there a possibility to turn off the "Wake on LAN" in the bios on the network. The Toshiba software tool, I believe that hwsetup is not installed on computers.

  Hello

  Visit the download page to Toshiba under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp choose your phone model and you will find the tools you need.

  Good bye

• Cannot select "Wake on Lan" option in Vista - Qosmio G20

  Hello

  If I go to Device Mgr/network/IntelPro100VE/properties/adapter management, I can't check the box for "allow this device to wake the computer". The box is empty and greyed out. (The Qosmio is connected to a LAN at home).

  1 could someone with a G20 and Vista please check if they have the same properties dialog box and let me know?

  2 - does anyone know what I have to do to make this check box select?

  Thanks in advance!

  D

  Hey Buddy,

  Unfortunately I have Don t have a Qosmio like yours, so I can't check it out. :)
  But I can give you a little tip:
  have you looked in the bios? Usually, you can enable the WOL in the bios options will be available Windows.

  Check this and tell me if you have achieved some success. ;)

  Welcome them

• Wake on Lan for HP Envy laptop m4

  I have a HP ENVY laptop m4 running Windows 8.1 (64-bit).  The laptop has a Ralink RT5390R 802.11bgn Wi - Fi adapter. I can't get to respond to any package of Wake-On-Lan.  The computer is connected wireless to 90% of the time.  At this point, I have not tried a sequence of waking with the wired connection, so I can't tell if it's successful.

  My question is: is-possible WOL with the Ralink card? And, if so, how you configure it?

  Thanks in advance

  The first thing you need to know is that it doesn't seem to be a WOL enable\disable option in the BIOS of your laptop want m4.  That does not make a non-viable option using WOL.

  You should read the following article on the How to Geek on WOL.

  http://www.howtogeek.com/70374/how-to-geek-explains-what-is-wake-on-LAN-and-how-do-i-enable-it/

• SMU 8880 Wake-on-LAN

  Hello

  Is it possible to have SMU 8880 be activated via the magic packet Wake-on-LAN?

  Our installation program runs a Phar Lap ETS OS.

  Kind regards

  W

  Hi WhizzWr,

  Unfortunately, the operating system PharLap ETS does not support WOL functionality. I think it's possible with the SMU-8880 runs Windows, however.

  Best regards

• Wake On LAN for 8133 Pharlap running

  Study the various options related to guard dogs and control of the external power supply and came across a white paper which talks about Wake On LAN (activate the controller via the Ethernet port).  I see the instructions for Windows, but I use a race 8133 Pharlap.  This feature is available with this platform/OS combination?  If so, are there instructions for WOL with Pharlap?  Thank you.

  GSinMN

  Unfortunately, the Wake On LAN feature is not supported by Phar Lap ETS. So that the WOL work, the ethernet for the operating system driver must be configured such that it can receive the wake-up signal. While it is possible in Windows, Linux and Mac, Phar Lap does not support this configuration. I apologize if our documentation was not clear and for confusion resulting in lack of clarity.

  Kind regards