Wake up auto and sleep mode. Please explain.

Similar Questions

• I have a pavilion with Vista m9457c. Recently, it developed a problem in which the mouse or the keyboard you wake the computer from sleep mode more.

  I have a pavilion with Vista m9457c.  Recently, it developed a problem in which the mouse or the keyboard you wake the computer from sleep mode more.  I knew that the fan on the video card was bad, so I replaced the video card.  This does not solve the problem.  I did so that the keyboard and mouse could get the computer from sleep mode, but it is still not correct the problem.  If I let the computer to sleep, nothing happens when I move the mouse or press the Crescent Moon on the keyboard.  The screen remains dark.  Then I have to physically press the power button / stop and return to restart the computer. Help me, Obi - wan!

  Hello

  You can read the folloaing articles and see if it helps.

  The problems of wake the computer from sleep mode

  A Windows Vista-based computer resumes the mode not sleep if you move or click a USB mouse as the computer is switch to sleep mode

  Hope this information is useful.

• Problems with Windows 10 screen standby and sleep mode

  After downloading 10 Windows on my desktop all-in-one HP, I have problems with the display of standby and sleep mode.  When the computer turns off, he doesn't have the bright screen.

  After the upgrade to Windows 10, some laptops have experienced one or more of the following symptoms:

  • > Power LED remains lit after stopping
  • > Computer enters standby or hibernation.

  HP recommends that customers see these symptoms first update the graphics drivers by removing and then reinstalling the hardware in Device Manager.

  See the section updating the graphics driver from where can I find drivers Windows 10 and software for my model?

• What happens when Task Scheduler is scheduled to wake the computer from sleep mode

  I have the windows vista Task Scheduler to wake the computer from sleep to run a command script. some tasks in the script work correctly and some do not. This is because the computer is "awake from sleep", whatever that means. This is not what is happening, because the tasks that the batch script runs when the computer is actually on, with display and all are very different tasks, it runs while the computer gets "awakened from his sleep", so what happens exactly when the task schedler wakes up the computer of mode sleep under vista? How is it possible to emulate a real awake state with the Task Scheduler to a State of sleep, according to a schedule?

  Hello

  The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro

• USB mouse - I don't want to wake the computer from sleep mode

  Windows 7 - I don't want my USB mouse to wake up my PC from sleep mode - some say go to Device Manager and uncheck the box 'Allow this device to wake up the PC' - I have in Device Manager - is this still possible?

  Hi David,

  Please contact Microsoft Community.

  As you informed in the query, you can not find to allow this device to

  wake up the PC in Device Manager.

  I suggest you follow the steps below to find the option.

  1. click on start.

  2. in the option Search , please enter run.

  3. in the run window, type devmgmt.msc.

  4. double-click on USB device in order to develop it.

  5. right click on the USB device and click on Properties.

  6. click on the power management tab, check allow this device to wake the computer.

  7. click on OK.

  For more information:

  On the power management

  https://support.Microsoft.com/en-us/KB/2740020

  I suggest you back up the registry and check if that helps.

  Back up the registry:

  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  Warning: serious problems can occur if you have any changes in the registry incorrectly. So, make sure to run back up the registry before you edit it.

  This information is useful. Please let us know if you need help with Windows, we are happy to help you.

  Thank you.

• HP - 15-ac152ur: function keys and sleep mode issues

  Hello, I jusy bought a computer laptop 15-ac152ur and I have the following isuues:

  -Function keys does not work correctly. By pressing Fn + a F (F9 for example) on "key" works as if I just pressed the F key. For the failure, by pressing Fn + F5, while in the results of google chrome in web page update, but pressing on alone F5 does nothing, so I can't adjust brightnrss or the volume using the function keys, which is very worrying, because it seems that I have no way to adjust the brightness without them.

  -Another problem is that after book of sleep mode is not "wake up", it gives me just a black screen and the only thing I can do is to reset.

  I have windows 7 x 64 operating system and I have already installed driver chipset and drivers for both integrated and AMD graphics cards. The only thing I do not installed is updating the BIOS, can it be the problem? And what I can do to solve these problems?

  Thank you in advance.

  Solved the problem with mode 'sleep'. It appeared that it was a bad idea to update the drivers for the graphics card web site AMD Amd, I should have installed only the driver located on the hp support site.

• screen standby and sleep mode

  When the screen saver comes on, the back ground stays on too, it's just background or a Web page.  Also when I want to sleep, the screen will turn black, but the computer will not sleep.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  All the default power plans and then set them as you wish.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite M70: pauses and is slow when connecting power and sleep mode

  My M70 with win xp is often slow logon, logoff, switch to sleep mode and stop donw. It seems to be a 'pause' for 20 sec or so doing nothing and then suddenly in advance.

  I noticed the same thing on my M70, but there is nothing unusual. By record/stop several processes must be started or stopped, and it takes time. By Eve that last used applications and content of the last transactions must be recorded in the memory live and by flipping down several ongoing process must be stopped. In my opinion in this 20 seconds OS trying to stop running of processes and services.

  As much I know it can't happen in a second or two and it takes a little time. Last week I preinstalled Vista. It runs a little faster but I have no pre-installed apps.

• After update laptop graphic card driver HDMI port does not not work and sleep mode disappers

  Mr President, I have buy a new computer laptop 15-e017tx after the update of the graphics card.

  • HDMI port does not when I connect the laptop to my led tv
  • In the windows operating system sleep mode is dissappers.
  • On the start menu, the language is Hindi

  There are problems am faceing now. How to solve this problem? Short films screen attach also the problem when I open the catalyst control amd.

  Hello

  As mentioned above, restoring Windows 8 will allow:

  http://Windows.Microsoft.com/en-AU/Windows-8/restore-refresh-reset-PC

  Good luck.

• iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

  Hello!

  My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

  Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

  What could be?

  Please help me!

  4ntoine

  Here is my model of iMac:

  iMac 27 "mid-2011 model 12.2

  Intel Core i7 3.4 GHz

  AMD Radeon HD 6970M 1024 MB

  OS X El Capitan 10.11.6
  SMC 1.72f2

  Boot ROM IM121.0047.B23

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• May not wake my computer from sleep mode

  Hello!

  My computer wake from sleep very well. I stopped to do for awhile; then when I went to do it again, it wouldn't work. I don't know if this problem started; Therefore, I can't really do a restore on any given day.

  When I move the mouse or press the space bar, the computer seems to wake up from sleep - everything seems to work fine (fans, lights, etc...) -only the screen goes black and says he'll sleep because there is no entry for the computer. I push the button to turn off the computer completely the computer. When it restarts and I check for any problem in the event viewer, I can't find anything that might have caused this to happen.

  Windows Vista SP1
  Compaq Presario desktop computer
  2 GB OF RAM

  Here are the things I've tried so far...
  * I am logged - in as administrator of the computer
  * Checked with HP for the BIOS update - I've already been updated later on their Web site.
  * Using various Vista Web site tutorials, I played a bit with Windows power management settings (hibernate, sleep, hybrid, etc...).
  * Look for updates of video card - I already have the updated version.
  * Changed my Avast AV to moy.
  * Uninstalled AVG completely
  * Performed SCANNOW several times the last two weeks - no issue reported
  * A tried to generate a system health report, but I am not able to - see another question that I posted today.

  I've seen suggestions on remove the BIOS battery or reset the BIOS to its default settings, but I did not feel brave enough to do all of this - not found reassuring advice that will not destroy my particular computer: o) I went into the BIOS to have a look at the power management settings , but there was something I could do with them - absolutely nothing on the standby or Hibernate mode or whatever it is.

  THANK YOU for any help! I really appreciate it!
  Sincerely,
  Jenny

  Sure!
  You should be able to go to the Intel website and look for your video chipset.
  From there on, download the appropriate driver. I would put it on my desk as you can delete it when you are finished.

  Once it is downloaded, you should be able to just double-click and install it.

  I'm guessing that you went into the Device Manager. Who will stop you if the drivers are the same version.
  The other way will overwrite the old driver.

  In the worst case, you will need to uninstall the old drivers first and then install a new one.

  Good luck, let us know how it goes. Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with Intel (r) C600/79 X series chipset PCI Express Root Port 3 - 1 d 14 wake my computer from sleep mode

  Hello

  (hope this is the right forum for this question)

  I asked on the forums so, called Microsoft and the company that made my computer and no one can give me an answer - I don't know what to do anymore.

  Whenever I put my computer to sleep (remotely or in the menu windows) it automatically wake up after a certain time (various from 5 seconds to 30 minutes) and he does it without doing me anything.

  So far I have tried:

  • BIOS upgrade
  • Updated many drivers
  • Out all my USB and stuff to see if that had nothing to do with it.
  • Anything that might wake my computer without getting so basically (mouse, keyboards, regular stuff etc.) disabled
  • Above all, I was googeling everything that is remotely close to the subject, I'm trying hard and again came away empty-handed.

  As I said in the topic I think that I discovered that the PCI 3 - ID14 express root port is the problem, but then again, what the h *, is that, and I can't for the life of figure me out how to disable.

  My configuration:

  • Windows 7 Professional Service Pack 1
  • 2 monitors (BenQ and Acer)
  • Razer BlackWidow (keyboard)
  • Razer Imperator (mouse)
  • Logitech webcam
  • NVIDIA Geforce GTX 680
  • Intel Core i7-3820
  • Asus P9X79 (motherboard)

  

  Anyone has any ideas or have had similar problems? I'm so sick of what I think actually just reinstalling EVERYTHING, but that requires a lot of work because I have so many things I need to keep.

  Any help, either, is appreciated.

  Thanks in advance

  Hello

  Thanks for all your efforts, but the problem is now resolved.

  I downloaded manually all the network card drivers that had nothing to do with 'Realtek' or whatever it is. Then suddenly it worked. So I probably installed a correct driver, strange thing is that I update my network card in the past, but it does not solve the problem.

• Impossible to wake the computer from sleep mode by moving the mouse.

  Original title: problem with winter and power off

  Recently, after having my laptop cleaned (dust) I can't do the hibernation option or turn it off (just taking the button turn off for a long time). The screen goes black, almost as if she's asleep. but I can't wake him by moving the mouse. I tried all the stuff I found on the internet and on the microsoft page. Please help :( Also, im using WIN7

  Hello

  I suggest you to update all the drivers on the manufacturer's Web site and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Contact Asus:

  http://support.ASUS.com/contactus.aspx?SLanguage=en

  You may also contact the company who did maintenance work on the laptop.

• FindFile failed. Realtek network controller was not found. If Deep Sleep Mode please connect the cable.

  So far, I went through 3 different network since that on my motherboard (z77 Extreme4) cards is dead. I always get the same exact error, has a restored system, reset the cmos, etc.. Any ideas on what is wrong?

  Finally, I resolve this problem.

  My system has been recommended to Win8, but I didn't like it, then installed Win7, all driver installed fine (I installed the drivers provided for 8 to 7) except LAN.

  My network controller was Realtek PCIe GBE Family Controller. Installing it was an error called "find file failed" followed by "unknown version".

  So what I did is, uninstalled Realtek PCIe GBE Family Controller in Control Panel.

  then for the Realtek site

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false (link may not work a while, you just look for the query.)

  then from there download driver "Win7 and Server 2008 R2 Auto Installation program (SID: 1669850) ' (possibly in second row, 6011 k). Install it.

  It was smooth installation, now any file.

  Hope this helps. See you soon

• screen goes black and moves randomly please explain answer in detail as I use windows 10 and I can not understand the answers already given

  screen turns black and moves randomly when using most of the tools of photoshop.  I use windows 10 and cannot follow the above.

  Hi Nodstown,

  Greetings.

  • What version of PS do you use?
  • Mac or Windows, which version?
  • There may be several reasons for this.
    • Preferences corrupt.
    • Obsolete graphics drivers.
  • Solution
    • Try resetting the PS tools. (See screenshot)
    • Try resetting the PS preferences - to restore preferences quickly by using a keyboard shortcut: press and hold Alt + Ctrl + Shift (Windows) or Option + command + shift (Mac OS) when you start Photoshop. You are prompted to delete the current settings.
  • • Update graphics card drivers
    • AMD - AMD Catalyst 15.10 Beta Driver for Windows
    • NVIDIA - drivers | GeForce
  • Also, try opening the PS, then go to preferences - performance and uncheck CPU chart use
  • Now, restart PS and then try to use tools again.

  

  Concerning

  Rohit