WAN miniport (ATW) #2 has a driver problem. Driver should be replaced.

Similar Questions

• Miniport Wan WAN (ATW) #2 has a driver problem

  My computer says Wan miniport (ATW) #2 has a driver problem does - what I do?

  In most cases, you do a right click on it and select "Uninstall".
  When you restart it will come if necessary.
  On some occasions, he ain't-, but the system will work fine without it.

  If it will not uninstall, it is usually the result of a malware infection
  Try the free antimalware scans here: http://www.carrona.org/malware.html

• Unable to connect to the VPN. I found that this could be because of the mistake of sstp WAN Miniport. Windows has the drivers for it?

  Recently, I upgraded my windows vista business to windows 7 Professional and can not connect to the VPN. When I did a search on the internet I found that this could be because of the mistake of sstp WAN Miniport. Windows has the drivers for it?

  Vijay
   
  Original title: miniport network driver extended WAN sstp

  Hi Vijay,

  You can view this issue in the Forums of TechNet Windows 7 IT Pro: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

  Thank you.

• WAN miniport (ATW) #2 code 10

  I tried to solve this problem since yesterday!  I read on a post somewhere that the miniport (ATW) #2 MAN was something from AOL and could be uninstalled and AOL would install it back? Is this correct and do I do? Better yet, do I NEED? My laptop has 'lost' my e-drive again! These 2 problems could be related? It happened all the time and I did what was suggested with the regedit, remove low filters etc. I looked again and I don't see the bottom or upper filters. I really want to take it back to the shop.  All I can do to solve these two problems would be greatly appreciated.

  Thank you
  Kathy-NdesperateNeeDofAfiX

  Hello

  ·         What operating system do you use?

  ·         Did you do last changes made on your computer before the show?

  I suggest you to follow the steps in troubleshooting this article and check if it helps:

  http://support.Microsoft.com/kb/943104

• WAN Miniport (SSTP) driver problem

  Troubleshooting tool Windows 7 64-bit notes following problem:

  "Miniport (SSTP) WAN has a driver problem"
  and cannot be set. Microsoft then directs me to:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=Marvell%20Miniport%20Driver&v=Marvell%20&UID=11&l=en&pf=0&PI=0&s=Wan%20miniport%20sstp&OS=64-bit 
  Marvell is not available for downloading drivers. I need this driver? What it is? Can I just delete it? Is there a place I can download a driver for it?

  Thank you.

  Hello

  As I said above "just disable the miniport if you want, do not try to uninstall."
  It is part of the network drivers and you cannot uninstall it correctly. You can simply
  ignore it.

  ---------------

  Check with all of the program of these antivirus/security for removal tools
  and/or methods such as uninstalling them will always let its, which can cause the
  strange problems. Run their tools or use their methods to remove leftovers.

  AVG removal tool
  http://www.Avg.com/us-en/download-tools

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  ---------------

  For the mctres.dll:

  The manufacturer of your system will sell you the Windows disk at low cost since you already own
  Windows. It is the best solution if you have the disk with the OEM drivers and
  public services already on it if you need them. If you know someone with a full retail
  version of the drive, you can copy them (it is not protected against copying) and use your own
  product key.

  How to extract the files from the Installation of Windows 7 DVD
  http://www.SevenForums.com/tutorials/42776-extract-files-Windows-7-installation-DVD.html

  How to extract system files missing from the DVD of Windows 7/Vista.
  http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/

  Another option:

  You can also perform a repair Installation that allows you to keep the programs
  and although redundant data backups are always a good idea. (Read the instructions
  in PINK and yellow carefully as not all discs allow this method.)

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Driver problem with GalaxyTab 10.1 - peripheral USB MTP has a driver problem: Microsoft Virtual WiFi Miniport has a driver problem

  I just a GalaxyTab 10.1.  Connected to the computer and got the following driver problems: "USB MTP device has a driver problem" and "Microsoft Virtual WiFi Miniport has a driver problem.  What are the corrections?  My automatic updates are up to date.  is it a problem to Microsoft or GalaxyTab?

  Hi David,

  1. have you received any disk software for GalaxyTab 10.1?

  Method 1:

  You can try to start the Fixit material and check.

  Hardware devices do not work or are not detected in Windows

  Method 1:

  You can try to uninstall and reinstall the device.

  a. click the Start button, in the start search box, type devmgmt.msc and press to enter.

  b. Select the USB device and right click on it.

  c. now, select uninstall.

  d. restart the computer.

  Alternatively, you can download the drivers for your Samsung device from following link:

  http://www.Samsung.com/UK/support/detail/supportPrdDetail.do?menu=FW&prd_mdl_cd=gt-P1000CWAXEU

  2. What is the error or message code you get for Virtual WiFi Miniport in Device Manager?

  Method 1:

  Alternatively, you can try to reinstall the Virtual WiFi Miniport driver and see if it helps.

  a. click the Start button, in the start search box, type devmgmt.msc and press to enter.

  b. Select the device to Wifi Miniport Adapter, the network adapter and right click on it

  c. now, select uninstall.

  d. restart the computer.

  After the computer restarts, the drivers will be installed automatically.

  Method 2:

  If you're still having problems, then try updating the chipset and network card drivers.

  For more information, you can consult the following articles:

  What to do when a device is not installed correctly

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• Microsoft Virtual Wifi Miniport Adapter has a driver problem (Code 31)

  Hello I have a small question. It started by I first went to devices and printers and the choice to add a device by mistake. When I saw that I cancel what has led to the blue screen. After that, my computer restarted by itself and asked me that if I wanted to run windows normally choice run windows normally. Then I loged in and told me your computer just a restore from an unexpected shutdown. Later, I noticed that I had a troubleshooting and it said that Microsoft Virtual Wifi Miniport Adapter has a driver uncorrected problem also peripheral Pnp. I tried to go to Device Manager and update of MCWMA, but he said he has not set. What should I do to solve this problem, because im starting to get worried because it is a new computer. Some of my other question about what is Microsoft Virtual Wifi Miniport Adapter and do I need because I can connect to the internet fine wireless. Thank you for trying to help me I really appreciate it.

  My operating system is Windows 7.

  Hi John546,

  Thanks for posting. Proceed as follows to see if your problem persists. Open the Device Manager, under network adapters do a right-click on the Miniport Microsoft Vitural WiFi card and choose disable.

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• virtual miniport card wi fi has a driver problem AND keyboard filter does not have a pilot. When I trouble shoot for first problem I code 31__

  My virtual miniport card wi fi a driver problem, when I trouble shoot it said windows cannot reinstall pilot 31 code.  And the filter of my keyboard doesn't have a driver!  It is a laptop brand new which had no problem a few days ago.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And don't forget, it is under warranty.

  See you soon.

  Mick Murphy - Microsoft partner

• WAN Miniport problem?

  Hello everyone do not know what is happening, but what is the problem. Miniport Wan (Network Monitor) has a driver problem. WAN Miniport (IP (has a driver problem.) Miniport WAN (IPv6) has a driver problem. It says to reinstall the device drivers. How do I do that?

  Hello Zach,

  I suggest you follow the steps mentioned in the link.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/repair-WAN-Miniport-Network-Monitor-2/8a3ee419-dd65-4b78-af1d-394ed464622b

  Hope that the information provided in the link will help you get rid of the error and install the drivers correctly. If you have any questions, please let us know.

• Placa wifi miniport virtual da microsoft tem um problema num driver

  Placa wifi miniport virtual da microsoft tem um problema num driver, como posso'll?
  ASUS X52J
  Obrigado

  Hello

  You posted on a forum for English language. Please choose your preferred language in the link at the bottom of this page.  English 

  http://answers.Microsoft.com/en-us/Windows/Forum?tab=all

  See other options of support for many regions and languages here:

  http://support.Microsoft.com/common/international.aspx

  Don

  - - - - -

  [Portuguese]

  Voce em um idioma Inglés forum go. Por favor, selecione o idioma preferido has go link na parte inferior desta page.  English 

  http://answers.Microsoft.com/en-us/Windows/Forum?tab=all

  Veja other suporte para many regioes may e idiomas aqui:

  http://support.Microsoft.com/common/international.aspx

• Wide area network WAN Miniport driver

  Hello

  I'm looking for a specific Driver for Windows 7 64-bit:

  Name [00000001] WAN Miniport (IKEv2)
  Adaptertyp not available
  Produkttyp WAN Miniport (IKEv2)
  Installed Ja
  PNP-Geratekennung ROOT\MS_AGILEVPNMINIPORT\0000
  Letzte Zurucksetzung 21.04.2010 16:28
  Index 1
  Dienstname RasAgileVpn
  IP-address non available
  IP-Subnetz non available
  Standard-IP-Gateway non available
  DHCP aktiviert Nein
  Server DHCP Nicht available
  DHCP-lease-cases non available
  DHCP-Lease-Start non available
  MAC address non available
  Driver on c:\windows\system32\drivers\agilevpn.sys (6.1.7600.16385, 59,00 KB (60,416 bytes), 14.07.2009 02:10)
  

  I finally found a resolution for this problem:

  As I discovered that the recovery environment is based on WPE 2.1, I simply took the 32-bit driver for Windows Vista, it incorporated in the recovery CD and everything went well :)

• With WAN Miniport problem when you configure the VPN in Windows 7 server

  I tried to make my computer a VPN server by establishing a "new incoming connection" under connections in the network and sharing Center. Originally, she she started but showed no WAN Miniport connections. I could not connect to this VPN with my other computer.

  What I've done so far:

  • I have 'upgrade' all WAN Miniports in 'MAC Bridge miniport driver' Device Manager (since I couldn't uninstall them as they were) and then uninstall all WAN miniports. I restarted my computer and then I tried the device drivers to install automatically, but only a few installed successfully.
  • Then, I downloaded the latest WDK (8.1) and tried to reinstall all Miniports WAN via devcon.exe with the command "devcon.exe install c:\windows\inf\netrasa.inf MS_PptpMiniport. He says that the node has been created, but it could not install the drivers. I restarted my computer, but some of these minis ports appeared as 'Unknown' in Device Manager, while others appeared with their names but with numbers attached because I tried a few times, Ex: "Miniport network EXTENDED (IP) #3".»

  from my understanding, I need at least WAN Miniport pptp to work for VPN to work. I don't know what to do at this point. Any help is greatly appreciated. Thanks in advance.

  Gateway DX4822-01 desktop PC

  Windows 7 64-bit, SP1

  Hello Jdrumr,

  Welcome to the Microsoft Community Forum.

  The question you posted would be better suited to the TechNet community.

  Please visit the link below to find a community that will support what ask you:

  Microsoft TechNet

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• Satellite A500 - 1C0 - Windows has detected a problem with HARD drive

  Nice day
  Laptop shows me that Windows has detected a problem with the HARD drive. The laptop is running slow and chops. And when you turn it, it shows me Smart failure predicted on hard disk 1. Toshiba MK-5055GSX - (S2). Can you help me? (I m, CZ)

  http://img684.imageshack.us/img684/8434/smartm.jpg

  Hi Konyga,

  If you already have a warning on the internal HARD disk before Windows starts I would recommend sharing it and backup all data as quickly as possible.

  Is your laptop still under warranty?
  If Yes, you can get a new HDD to an authorized service provider. It would be free because it s covered by the warranty. All you have to do is contact with an ASP.
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

• Message that "support virtual bluetooth (including audio) has a driver problem"

  I have a message "virtual bluetooth support (including audio) has a driver problem. How to rectify the Pls?

  [Moved from the community centre of Participation]

  Hello

  1. What version of Windows is installed on the computer?
  2. When you get this error message?
  3. Were there recent changes made on the computer before the show?

  I suggest you install the latest drivers from the manufacturer's website and check if it helps.

  For instructions on how to update the drivers, see the suggestions of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

  Thank you.

• When the phone rings it temporarily blocks access to internet on my laptop. I ran "Troubleshooting" and he said the teredo tunneling adapter microsoft has a driver problem (code 10)

  Teredo tunneling adapter error: Code 10

  I have a wireless modem in my house.  When the phone rings it temporarily blocks access to internet on my laptop. I ran "Troubleshooting" and he said the teredo tunneling adapter microsoft has a driver problem (code 10) and I have to click "Reinstall driver" I did.  But it will not re - install.  I'm not too irritable.   Can help you.

  In addition, I don't know if there is a related problem, but my laptop takes a long time to communicate with the printer.   The doc will be in Quebec but does not print.

  Thank you.

  Hi LindaGreenwood,

  1. what operating system is installed on the computer?
  2. you have made no changes to the computer before the broadcast took place?

  Generated 10 error code when Device Manager does not have enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  I suggest you uninstall the drivers completely uninstall and then reinstall the drivers from the manufacturers Web site.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly