Want 5540: Output tray HP Envy 5540

Similar Questions

• HP OfficeJet 5740: Auto output tray

  I like the feature of automatic output tray.  I noticed under the tray locking mechanism.  If I want to keep the status bar automatically after each print request, can I just lock the State Bar in order to avoid the automatic extension of the status bar?

  Hello
  
  Thank you for using the HP forum.

  The answer to your question is 'YES '.

  Hope that helps.

• HP OfficeJet Pro 8620 e-All-in: how to remove the output tray on my HP OfficeJet Pro 8620 e-all-in-one printer

  I can't remove the output tray.  I do some print double-sided (one in color, the other b & w).  It's time to remove the main input tray to place paper for side 2.  It would be much easier to take the 1 side printed just as it ended, and then set it just fine on top of the blank sheets in the main input tray to print page 2.

  I can't remove the output tray.  The store clerk said that it should be easy to remove and re - install, but that it can be kept in place by a piece of tape.

  I'm prone to breaking things, I am working on that.  I don't want to break my 4 month old printer!

  Any ideas?  Thank you.

  The main part of the output tray is not removable.  There are a few alternatives: the tray can be removed partially opened and printed pages, loaded in it - it should not be necessary to remove the tray completely.

  The other possibility would be to simply print using the auto duplexer.  If you are printing on plain paper or paper index, it should work, it would not be suitable for printing on the back of the photo paper.

• OfficeJet pro 8600 output tray

  How do remove you the output tray for legal size paper.

  Hi columbia530,

  You should be able to extend the output tray on the legal situation. If it seems to be stuck, you may need to push in, then spring one or two times to the release. Be sure and be careful when you pull the tray does not break the flap at the end of the output tray.

  

• part number HP 8600 output tray

  My on my 8600 (749n) printer output tray is broken.  What is the spare part number?

  I am including a direct link to a paper for your printer tray.

  Let me know if it helps.

• 8600: broken extendable output tray

  I need the Nomenclature of the printer in order to identify the part number so I can order it.

  The pods that stop pivots on broke the EXTENDABLE OUTPUT TRAY, and now there is nothing no prevents the paper ended on the ground.

  Doomed to failure.

  Thanks for your help.  However, you add the part to the basket, go to the store, and it is that you get!  I'm going to their phone when they open.   I hope that the part number is good, a scheme of BOM parts is really necessary to confirm.

  Cordially TheKing1

• LaserJet 3052 jam in the output tray

  Help!  I have a paper jam in the output tray which cannot be extracted from the front.  The manual says to remove the back panel, but there are no instructions to know how to get down panel rear and I'm afraid I'd break.  It seems that there should be a button to push to release, but I can't find anything.  I can't get off!

  Hi lstreicher,

  The HP LaserJet 3052 all-in-One printer is a professional printer. I recommend you post in the forum for HP Business Support for a better chance to find a solution.

  Here is the link to the Board Commercial Laserjet:

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413

  Also, here is a link to the support page for the HP LaserJet 3052 all-in-one printer:

  http://h20000.www2.HP.com/bizsupport/TechSupport/home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=1140784&task=&lang=en&cc=us

• DeskJet 1510: Message output tray on Fake

  My printer was working fine a few days ago, but now it shows the message to open the output tray while it is already open. I tried the help video provided, but nothing has worked. Help, please.

  Hi @Ashutosh-Dubey,.

  Welcome to the Forums of HP Support!

  I see that your HP Deskjet Ink Advantage 1510 printer gives you a false error message, the display status bar. I will definitely do my best to help you.

  I would like to do a Hard Reset to see if that will solve the problem.

  • Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  • Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  You see lights flashing on the printer? Which?

  Important! Please follow the steps below from beginning to end, even if it may seem unimportant to you.  We need to find the root cause of the fake message and should contribute to this document.

  Question: The Attention is flashing

  In this error condition, the lightweight design of the following control panel appears:

• Want that output SQL group

  I have a request in the form

  Select Group, bill, table Qty.

  and output as below

  Advantage Bill Qty

  === ===== =======

  x 1 XXX 50

  x 1 XXX 50

  x 1 XXX 60

  Y1 YYY 23

  Y1 YYY 50

  but I want to output as below

  Advantage Bill Qty

  === ===== =======

  x 1 XXX 50

  50

  60

  Y1 YYY 23

  50

  How can I get this help please

  Hello

  If you use SQL * more then you simply need to use 'BREAK' (and an ORDER BY.)

  WE BREAK bill WE left

  SELECT Bill, part Qty.

  FROM MyTable

  ORDER BY 1, 2, 3

  ;

  Best regards

  Bruno Vroman.

• all-in one want 5540: automatic extension tray

  I just bought the printer ENVY 5540 and wanted to know if automatic extension tray should also retract automatically when I stopped the printer. It extends automatically when I start printing, but I have to manually replace it once I'm done. The State plug it is auto - so I guess it would also retract when I turned off the printer. I hope that someone knows? Thank you.

  Hello
  
  Thank you for using the HP forum.

  Extension is automatic while the retraction is manual.

  Thank you

• WANT 5540: Compatibility of envy 5540 with OSX Sierra

  Hello

  I just bought a 5540 envy and it's a nightmare, trying to get it to scan using computer scanning (TBS). Sometimes it works sometimes it doesn't. He worked earlier ebven today while STC has not been activated and utility HP reported that nothing could communicate with the printer.

  I tried to download the update of the firmware that has been issued on the 18.10.2016, but it wont load because its telling me the printer is in error.

  I deleted and reloaded the software six times and participated in two chat sessions, when technicians online, even with control of my thing, can not solve the problem. One of them asked me to move the printer within ten feet of my itinerary. I did, and the thing that worked until I rebooted the IMacwhen it has stopped working.

  Please help because my patience is running thin, and after more than 25 years of use HP stuff this thing becomes very close to be thrown in a dumpster and replaced by a Canon...

  Welcome @9191rogerm,.

  Thanks to their participation in Forums of HP! By your post, I see that you have intermittent scanning computer problems on the Sierra. I can help you.

  Are you able to scan from the Mac on the network?

  I would like to know what software you tried.

  If this is not the case, try a USB connection. Let me know if it worked.

  Try connecting the USB cable to see if you have the same problem or USB connection.

  "Check that the ' enable scanning to computer" is always on.

  • Scan network connection is lost (Mac).

  Feel free to click on the button 'Accept as Solution' and the 'Thumbs Up' for my help. Please let me know the results and if there is anything else I can help you. Thank you!

• Want 5540: Cyan not print on new HP Envy 5540

  Just bought and installed an HP Envy 5540 printer all-in-one. Everything I try print the fate of the right color. On the use of the tool "Print quality diagnostic", I discovered that all the colors are fine EXCEPT the Cyan. It doesn't print at all. I followed more detailed instructions step by step on how to fix this problem with no advail. It prompted me to "Clean cartridges" which he has done 3 times then said to contact support. Someone at - he no idea why this is happening? This is a new printer straight out of the box, I bought a few days ago so do not know why I would like to experience this?

  Looks like you have already performed the steps in troubleshooting in the paper here.  At this point, he seems to have a faulty cartridge and will need to contact HP for a replacement.  You can remove the cartridge and gently pat dry the nozzles on a wet tissue.  A good cartridge will have a strong task of cyan, magenta and yellow.  If your cartridge cyan is missing it would confirm the cartridge as the question.

  From a post of Sunshyn2005, contact technical support HP see the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
   
  File number and phone number are displayed.

• Want 5530: hp envy 5530 output tray

  I just bought a HP Envy 5530.  Everything went well.

  My question is that I do not see an exit try to print pages.  The page just spit on the ground.  I looked at the manual (docs) and videos from Youtube. and don't see any sign of this printer that we have seen that wait exit.

  If anyone can help.

  Hello

  Here is the picture:

  

  Kind regards.

• Want 5540: Impossible to activate the computer Scan: 5540 Envy, MacOS 10.12

  I tried to activate the Scan of the computer using the HP utility application settings. I received the message (in part), "HP software required for the Scan of the computer could not be located on this computer. Please download and install the latest software recommended HP... ».

  I then proceeded to the HP website and downloaded the appropriate firmware update. When running the executable, I received the message (in part) "device is in an error state and cannot be flashed because of this... »

  NB., we have been able to print using this printer, Wi - Fi, easily, since the purchase and installation on 28/08/16. No problem. In addition, using the * Apple * settings, by selecting 'Printers and Scanners' and going through the routine of "Scan", I can acquire a successful analysis (placed in "jpg" format in the 'Images' folder).

  I'm so concerned - very disappointed - as to why I can't activate and use the "Scan to computer" utility from HP. It does not work from the laptop computer side or from the printer control panel.

  Advice?

  Hello
  If you have HP scanning or a previous version of HP Easy Scan in the Applications folder or HP subfolder, delete it by moving it to the trash, and then empty the trash.
  
  Install the latest HP Easy Scan below, it will be installed in the Applications folder:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg
  
  If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip
  
  Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
  Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.
  
  Kind regards
  Shlomi

• Want 5540: Digital Photo

  My Envy 5540 printer will not retain the setting "use photo trays. I get a message that there is some kind of conflict. Pressing AutoCorrect returns the statement in the main tray.  I downloaded the latest software of the printer. I read the answers to similar questions on the forum, but I still don't know how to print a photo 4 x 6.

  In the search for a solution, I found a shortcut to print to print borderless prints.  That showed me that there is a choice of 4 x 6 paper.  It is rather hidden because it is labeled 10x15cm/4x6in.  I had to change the shortcut to change the main paper in the photo tray. When I used this choice of paper with the other settings you suggested, I could get a 4 x 6 print.

  Thank you for your help.

  Sincere greetings,

  GPSalinas