want all-in-one 5532: SD want 5532

I try to scan to the sd card for the first time, but failed to get one of my cards to go in the slot? Very poor help with nowhere! It says sd when I check for the type of card and that's what I have.

can someone please tell me what I'm doing wrong?

Hello

I am lucky to have a craving 553 x Printer series to my office and and SD card. I understand the problem...

  • In my first attempt, with the long edge of the card parallel to the table, I could not insert the card.
  • In my second attempt, with the edge along the map slightly tilted upward (perpendicular to the slope of the printer), I could easily insert the card.

Please try it and let me know how it goes.

Tags: HP Printers

Similar Questions

  • Want to 4500 all-in-one: Envy 4500 scanner on the internet

    At home, I have a HP Envy 4500 all-in-one printer / scanner. I can the documents sent by e-mail to hpepint and that works very well.

    But I'm at work in another city and you want to scan a document located on the 4500 feel like at home.

    Is it possible to scan a document on the internet?

    My phone app it won't unless it is connected to the same WiFi network as the printer.

    Ric

    Hello

    IAM afraid to said that the analysis can be done on the internet.

    The Mobile/PC device should be on the same network for the scan to occur.

  • Want all-in-one 4507: Bluetooth

    Please can you let me know which Bluetooth dongles are compatible with this printer please?

    Thank you

    Hey @Helpmeprint1,

    Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

    I understand that you are curious about what Bluetooth dongles are compatible with your HP ENVY 4507 e-all-in-one printer. I would like to help.

    Just for your information, Bluetooth is not supported by this printer.  I see that you are an Android user however - this is for you with a few different printing options thanks to the combination of the unit.

    The simplest option available is integrated Android printing solution.  Click here to find out how to use this method.  If you are looking for options to interface a little more, read on.

    • Front panel of the printer, press the icon of webservices/ePrint:
    • If you haven't already done so, activate your webservices and press OK to enable automatic updates to printer
    • When finished your printer will print a sheet of info announced his claimcode (which is the first part of the ePrint address preceding [email protected]).
    • If you were able to activate Web services successfully, you now have two additional printing methods that you can use with your Android device:
    1. ePrint by email - to use this feature, simply send the content you want to print (emails, photos and file attachments) by e-mail to the address @hpeprint.com of your printer.  You can use the email app on your Android device to do and for convenience, you can save the address of your printer to your contacts.  Earlier in this post, remember that the address of your ePrint printer would have appeared at the bottom of the slip of webservices.  Click here to learn more about customizing your ePrint printer's address.
    2. ePrint HP ePrint App - click here to install the HP ePrint app.  I generally recommend this method above others as the ePrint application give you the ability to customize your print jobs, print the photo and files stored on your device and print from the web.  Click here for more information on how to use the HP ePrint app.

    Let me know if you have any questions beyond that.  If I helped you to solve the problem, feel free to say "You rock!" by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

    Thanks for posting in the Forum from HP Support.  Have a great day!

  • Want some 4500 all-in-one: how to print photos to urge 4500 using samsung notes 10.1 2014 edition

    I envy, printer all-in-one... and although I have printed letters successfully for some reason any it won't print from the photo! So, if ordinary letters is "an ok" why no photo?  Do I need something else on the note to do this? Also, I can choose to print different size photo if I want to?  Thank you.

    Hello

    You need to download the HP eprint and use it to try to print your photos. There are many printing options available.

    Once the two devices are connected to the same wifi network, you will be able to print from the eprint app.

  • total impressions on a 4500th want all-in-one?

    How do you determine the total impressions on a 4500th want all-in-one?

    Hello

    Click on the button down until the Tools option appears highlighted, and then click OK.

    Scrool up to the State of the printer report amd click OK.

    The printer Status Report list the number Total of Pages in the section printing information.

  • E-all-in-one printer want 5530: wireless set up for jealousy 5530

    Our new HP Envy 5530 printer works very well connected via a USB cable, but cannot be found by trying to set up as a wireless option with either my Lenovo H5 PC (via a Netgear A6200) or a laptop Lenovo W540.

    The printer connects to the same / correct SSID (BT Hub 3.0) and I tried to remove the firewall to see if it was what kept the whole upward.

    Any help would be appreciated.

    Welcome to the community @Matticus HP

    I read your post on how your printer is not detected when you try to set up wireless. I want you to try the steps in the guide below you should get properly connected wireless.

    A 'printer' display the error to the HP ENVY 5530 e-all-in-one and Deskjet Ink Advantage 4510 e-all-in-One Printer Series

    You can also see another thread, that I posted and check your router settings if the guide above did the trick:

    Re: HP 7520 loses connection wi - fi

    Good luck!

  • Want to 4500 All in One Printer: Envy 4500 and Photo paper

    Recently, I tried to use my 4500 want to print photographs, using HP Premium Plus Photo paper. Each attempted printing resulted in the printer telling me that there is a paper jam. I would open it upwards, remove the paper (which has never been really stuck - just looks like he started getting into the printer and stopped) and try again... Paper jam. I don't have the paper in the tray - went out my plain paper. I am able to print correctly on plain paper, but it won't take photo paper. Any ideas on how to solve this problem?

    Hi @kpdevlin,

    Welcome to the Forums of HP Support!

    I see you are trying to print a picture on your craving 4500 All in One Printer and it keeps blocking. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    Looks like there could be a problem with the rolls of paper, print settings, or the paper tray.

    Please work your way through this guide to see if you can solve the problem, a 'Paper jam' error on HP ENVY 4500 e-all-in-one HP Deskjet Ink Advantage e-all-in-one 3540 Printer series.

    Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

    You have a photo that you can try to make a copy of, as a test? It would be to help eliminate the printing as the cause.

    Please make sure that the paper type/quality settings are correct, for more information, please see this guide. HP ENVY 4500, printer Deskjet 3540 - change the Mac OS X print settings.

    In addition, if you have access to a Windows computer running Windows 8.1 or earlier, it is an update of the firmware available for your printer. HP Envy 4500 series firmware upgrade to improve the performance of the printer.

    If you have completed all the above steps and your product still has a problem, service the product.

    Contact HP for service in all countries except Asia-Pacific.
    First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
    Cost of repair out-of-warranty printers may apply.
    What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on: contact HP options - click Get phone number
    File number and phone number are displayed.

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • Aa3-600 all-in-one android, wanting the instructions for use as extended acer / monitor for laptop

    I am wanting instructions how to use my all-in-one android AA3-600 as a monitor for my laptop or scope.

    Connect your laptop and AA3-600 computer using a HDMI cable, then press the third button from the top of your screen to the right.

    page 8 of the user manual.

    http://global-download.Acer.com/GDFiles/document/user%20Manual/user%20Manual_Acer_1.0_A_A.zip?acerid...

  • 411 wants 110 all-in-in-one: Envy 110 411 a all-in-one has stopped working

    I want to 110 411 a all-in-one. I use the scan function - I don't use it to print or copy. I got it for a few years with no problems.

    Yesterday, when I went to scan a document as usual, he does not work and I had an error on a «transport jam» At the same time, the front where we load open paper sheets and the small arm (or what you call) that one up the paper also balanced out and remained outside. I don't know why that would happen, since I chose Scan and not print or copy them.

    I watched the online instructions and video for a carriage jam troubleshooting and followed the instructions, but transportation seems to be OK and there is no jam. No instructions troubleshooting that I saw mentioned the part about the lifting of the front and the arms of Briefcase to come. So, even if the error message says something about jam of transport, which doesn't seem to not be the problem.

    At this point, I followed the complete sequence of the steps in troubleshooting many times and they have not helped. In fact, I got a message saying that the device will be shut down to avoid damage. Help, please! I don't want to buy a new scanner right now!

    Dianne

    Hi @Dipena,

    Thank you for answering my questions!

    Please double check, that all steps have been taken in the following guides:

    1. Displays a Message ' Transport Jam '.
    2. A message "Paper jam".

    If the guides above are complete and has not solved your problem. Please contact HPtelephone support for further assistance. Repair printer / or replaced. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

    Good luck!

    "Please click the Thumbs up icon below to thank me for having responded."

  • Want 4500: Option of PDF indexable 4500 want all-in-one software?

    Hello

    I just replaced my Photosmart C5280 All-in-one with an fancy 4500 all-in-one printer/scanner. To my horror the 4500 want does not scan to Searchable PDF Format. (I find this very dissapointing and think it should be clearly advertised on the box.)

    My Photosmart C5280 OCR software must always be installed on my computer (Windows 8) and there are OCR software on the market. But is it possible (installation, download, purchase, etc.) to get the 'Searchable PDF' option available to the envy of 4500 software of scans? I want to prevent additional steps for each document that I will be scanning.

    Thanks for all the help,

    HenriPe.

    Hello

    A lot of HP printers have this add as an option. Customers can download from the site of the 3rd seller, install, then activate. During the activation process, it will check the printer and if in the list, it will activate the software otherwise it won't and the softeware will expire in a week or a month (I don't remember). The 4500 envy and many other printers Envy is not in the list.

    Also, customers can purchase the full version of the software, but I think that it is more expensive than buying the printer option. Since many printers is now very cheap, adding even a USB cable, the software will make printers are more expensive.

    Kind regards.

  • WANT all-in-one 23-o014: all-in-one monitor using the desire for PS4

    I want to know if it is possible for me to plug a ps4 to monitor my all-in-one desire. It has a hdmi port, but I don't know if it will work.

    Hello

    The following information may help:

    http://support.HP.com/VN-en/document/c04092080

    Kind regards.

  • E-all-in-one printer WANT 4500

    I install the 4500 e-all-in-one WANT to print wireless from my laptop Vostro 1500 (XP Pro). Internet connection through the modem of Connect USB clear. I do not see my wi - fi listed, and it is impossible to recover my SSID. Next step?

    Thanks for the quick respinse. I was able to get in touch with the internet provider. Wireless communication with the printer is not an option with my current service (USB modem), so I'll print the old-fashioned way, until I found a service easier to work with.

    Thank you once again!

  • I want to print black and white with empty color cartridge. My model is all-in-one HP Deskjet 4288.

    I want to print black and white with empty color cartridge. My model is all-in-one HP Deskjet 4288.

    The Deskjet F4288 joined the printheads on the ink supply.  These are replaced at each change of cartrdige so there is no concern about printing empty color or black cartridges.

    You should be able to print in ink entry mode "backup" by removing color (or black, but not both) cartridges.  There will probably be a warning message about ink backup mode but you should be able to print and the printer will work regardless of the cartridge is available.  In handwritten backup with the only color black cartrdige mode areas will print in shades of gray.  If print ink backup mode only the installed color cartridge then black will be printed by mixing colors.

    See page 75 of the manual here, that says:

    Use the entry ink-backup mode
    Use ink-backup mode to operate the HP all-in-one with only one cartridge. The
    ink-backup mode begins when an ink cartridge is removed from the print cartridge
    transport. During the ink-backup mode, the product can only printing from the computer.
    You cannot start a print job from the control (such as copying or scanning a Panel
    original).

    NOTE: When the HP all-in-one device works in ink-backup mode, a message is
    displayed on the screen. If the message appears and two print cartridges are installed
    in the product, check that the piece of tape plastic protection has been removed
    each print cartridge. When the plastic strip covering the contacts of the print cartridge, the product
    cannot detect the cartridge is installed.

  • want to 4500 all-in-one series

    I bought an envy4500 all in one series and after all tests and installation correctly, I had only one problem: when I print from excel files including 'grid' the printer will print all the lines in files. Sometimes jump the line grids, then print two or three grids correctily and back to the grid (lines). I made a copy of old copies and the copy was perfect.

    Thank you

    jbtpa

    Impression in 'best' or 'quality' mode should solve your problem.

    Alternatively, you can also use any other border style in Excel and it should print correctly.

    I would be grateful if this does not resolve your problem, or a problem on something other then Excel, border 'Style 2' in mode 'Normal' or 'Draft' hearing.

    Thank you!

  • Want 7640: Cannot send a scanned on Envy 7640 All In One document

    Until a few days ago I could send documents scanned from my desire to 7640.  All of a sudden the printer will not send.  I tried several e-mail addresses.  I have run the wireless network Test and everything is OK.  All the 'connectivity settings' are very good.  I uninstalled and reinstalled the printer software.  I am able to send the scanned to my MacBookPro.  Anyone has any ideas how to fix?

    Hi @Dan-M.

    Thanks for joining the Forums of HP Support for a solution to scanning to send the question.

    I understand that you have a HP ENVY 7640 e-all-in-one printer connected wireless to a Mac OS X 10.11 El Capitan and you used to be able to scan to E-mail, but now cannot. I would like to help with that.

    I start to Reset the power on the printer and then reboot the router.

    Please let me know if that solves the problem, or if you need assistance.

Maybe you are looking for

  • Error decoder IMAQdx configure enter with the Mono10 Pixel Format

    Hello I recently encountered the following problem, so I'm trying to capture images across an iPort CL - U3 Pleora USB3 vision. "Error 1074360265 occurred at IMAQdx configure Acquisition.vi. Possible reasons: NOR-IMAQdx: (Hex 0xBFF69037) no decoder a

  • Create the new property if there is no

    Hello I want to fill my container with some oher containers, unless they exist. So I created it: Locals.Exists("TestCont.A",0)?(Locals.TestCont.NewSubProperty("A",PropValType_Container,False,"Container",0), Locals.TestCont.A = Locals.B ): (True) Cont

  • Halo 2 on webcam live

    Halo 2 on direct via the servers it does not looks that the servers have been down for more than 2 days now. I bought the game new in March. The game is not supported by MS now?

  • Continually 2chan daqmx display

    Hello I am trying to create a program that can read and display both channels (force and acceleration) permanently.I use an NI PXI-4472 data acquisition card b. Please take a look at the attachment. (It is made in Labview 8.5.1). The problem that occ

  • Duplicate a window 7 display on a projector screen.

    Is it possible to have my Windows 7 pc in dual display mode only when a projector is on? I don't want to have to activate manually each time.