Want DV6-7300ea problem of updating Bios with SSD

Similar Questions

• Want to ask if the second pc with ssd may be authorized by the same key as magnetic

  HI.i have a desk with two internal disks.one magnetic and I a ssd.in the first 10 of an update of windows windows 7 .i want to ask if the second pc with ssd may be authorized by the same key as magnetic

  Hello

  Thanks for the reply.

  It is good to know that you have obtained the required information.

  Please do not hesitate to answer, if you have any other questions about Windows.

  Thank you

• Problem of updating BIOS on Satellite M60 - 175 - error rom size

  Hello

  If anyone can help!

  Tried to update my bios M60-175 with toshiba bios downloads but size rom error receiving while trying to flash rom
  my current bios; version toscpl-6040000, 1.00parttblx, smbios v 1.04

  Thank you

  Please check this Toshiba FAQ document about;

  + I can't update my BIOS with the function BIOS Phoenix-file ZIP Windows XP Windows. +
  + I always receive following error message: the size of the ROM file is incorrect. +

  http://support.toshiba-tro.de/KB0/TSB59014X0000R01.htm

  It should help to solve this problem

• update BIOS with freedos

  I have an Elite 7000 MT running linux.  Is it possible to update the BIOS with FreeDOS?  According to this link http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=4025606&...the sp48334.exe that contains a file AFUWIN.exe and Flash.bat should work with FreeDOS.  However, when I run it from a USB bootable with FreeDOS, I get the message "Cannot run this program in DOS mode."  It seems that AFUWIN.exe is not intended for the BACK, so this is a mistake that HP says it should work with FreeDOS?  Seems rather, I need AFUDOS.

  Thank you.

  Great idea!  It worked.  Thanks for the suggestion.

  John K.

• Update problem 6.70 BIOS with Satellite Pro C850-172

  I have two problems with the update the BIOS (the 1 is more important then the 2nd one):

  1. in the attempt to install the BIOS Update 6.70 - WIN (29/11/13) it is said that:
  "The version of the ROM file is the same as that of the BIOS.
  and it stops. In the DOS window, it shows a sentence:
  "NOT 8 platform Windows, using Windows 7 update... ».
  I use Windows 7 Home Premium 64 bit system but recently there has been an important automatic update done for her.
  I'm lost. I can do to update the BIOS?

  2. at the beginning, he says that Flash process will be terminated and I need to "contact the OEM BIOS engineer to add the location of NV storage by interface HISII". But if I want to risk I can continue etc.

  Previously, I took the risk and the update went well.
  But is it possible to contact BIOS OEM engieneer?

  Hello

  > When you attempt to install the BIOS Update 6.70 - WIN (29/11/13) it is said that:
  > "The version of the ROM file is the same as that of the BIOS.

  What is the current version of BIOS that is on your laptop?
  If the BIOS is already up-to-date, the BIOS flash process will be interrupted.

  > «NOT 8 platform Windows, using Windows 7 update...» ».
  I'm not quite sure about the meaning of this information, but it looks like the BIOS update was released for Windows 8 system and probably his need to improve the system from Windows 7 to Windows 8 to be able to Flash the BIOS m

  By the way: why you want to update the BIOS? Just because the new version is available?
  Please note that the update of the BIOS does not improve the performance of the laptop, but fixes some problems. In case your laptop runs successfully, the update of the BIOS is not very important

• Equium A60-157, problem after update BIOS 1.90

  Hi all!

  I've had my Toshiba Equium A60-157 for two months. I've updated the my bios twice. First of 1.70 to 1.8 C and from 1.8 to the current 1.90 (common at the time I made this post).

  I noticed that as soon as I used my recovery DVDs to restore the laptop to the default constructor, I had a problem with the main user account that is normally created after the completion of the recovery strategy.

  Whenever Windows would open a session after the recovery account generated, a popup would display a message similar to the following:

  "Windows can not load the profile and connects you with a temporary profile." No changes will be saved. "

  He also said that this problem was maybe due to incorrect permissions, or something like that. The pop-up window also contained a 30-second countdown before opening in windows with the temporary profile. As indicated by the pop-message no changes would be recorded. I could even change my user account image.

  I ran it again the DVD of recovery only to get the same problem. This NEVER happened when I ran on the original bios 1.70, bios recovery DVD AND 1.8 c.

  Anyway I came up with a solution to this problem, which only caused me no problem at the present time.

  I just logged into Windows mode without failure, entered the account administrator, created a new account and deleted the account of departure (created at the end of the recovery program).

  So far, the user account-wise, everything back to normal.

  If the recovery strategy or the bios did not cause this problem, I would be grateful if someone could give me some possibilities of doing just that.

  I don't want to get updates of bios from 5-10 down the road, only to find out that my recovery DVD does not work.

  Fact the DVD should be updated as well as the recovery bios?

  Thanks for your time.

  Hi, Conrad

  Can you please tell me why you do the updates to the BIOS? Have you had any problems? I use my unit for close to two years and I didn t make any BIOS update so far. If everything works well, it is not necessary to do an update with the exception of some Microsoft updates that make the OS more secure. Don t do any update if it is not necessary.

  In any case, I am very confused with your question. Normally, Recovery DVD should not be updated. The BIOS updates are useful if there is a hardware conflict or a problem and not a problem using the operating system or any software.

  It will be interesting to know why you're doing the recovery procedure each time after BIOS update.

• UPDATE BIOS WITH OEM WIN 7

  Hello, I'm under Win7 64-bit OEM version. I want to update my BIOS by removing the old BIOS chip and its replacement by a new chip with the latest BIOS on this subject. My question is, will see the BONE and detecting the new BIOS as a computer or a new Board of Directors. I will replace the CMOS battery at the same time.

  All advice appreciated.

  Thank you, Buster.

  Well well well, its my lucky day, I have triumphed!  I thought I would take a shot at a flash, downloaded the update of the BIOS on the XFX 4 times site, whenever Win Zip told me it was an archive invalid so gave up on that!

  Swapped the chip for the BIOS and CMOS battery, started waiting for re configure CMOS and BIOS, but all my settings was intact! How bizzare!

  Entered 'System' and noted that I had 3 days to activate, click on "Activate now" problems while waiting but no.. bosh... work.  Well happy.

  Thanks for your input guys. At least, it has been proven that you can put a fresh BIOS chip in a system with OEM operating system.  All the work took about 10 minutes!

  Thanks again, Buster.

  Thank you to let us know.

• Problem of updating BIOS on Satellite Z30-A-12R

  Hello
  I have a problem when you try to update the BIOS of my A-Z30-12R.
  I currently installed version 2.6 of the bios. My computer had to be reformatted and all programs re-installed. When reinstalling the utility the ECO utility could not be installed due to the incompatibility with the version of the bios that I use.
  When you try to update the bios, the new version is 4.2, but trying to download it and apply it, it says that my computer is not supported.
  Is it possible to update the bios? Why I have a problem with the new version?
  Thanks for your help.

  If you have Win7: install Toshiba Value added Package.
  If you have Win8/10: install the driver of Toshiba system and system settings.

• Satellite A500 - update BIOS with dead battery

  Hi all

  I have a Satellite A500 (PSAR3E) laptop and I need to update the BIOS to the latest version.
  Unfortunately, my battery died completely, and I have no chance to get a working one.

  I was trying to update the bios all day, but no matter how I try (even created a boot back drive and took command line phlash16, /forceit and so on) it keeps telling me that he needs at least 10% charged battery present.

  How can this problem be solved?

  > If I remove the battery, engine update fails, say there is no battery present, if I fix the battery, then update will fail saying the battery must be at least 10% - but he died, this percentage is 0.
  And you write about original Win version that you have downloaded from the Toshiba BIOS download page and started in Windows?

  To be honest is unclear to me that there is a trick to avoid this situation.
  Maybe something stupid, but now, do you really need to install the update to the BIOS?
  Is there a problem with your machine?

• Problems of updating BIOS on Satellite L40 - 15G

  Good afternoon.

  I have Toshiba Satellite L40 - 15G and I want to put 4 GB of ram (2 x 2).
  It works with 3 GB but with 4 GB it just does not start - gives me a blue screen.

  I read on the internet and discovered that I have to update my BIOS (my version curent is 1.60).
  I have vista 32 bit. I also tried to do the update via the site of toshiba, but without success.
  I am running the .exe file, but when I restart the computer I have the same version.

  What should I do?

  In the hope of a response.
  Pedro

  Hello

  I think you are using an incorrect BIOS.
  Satellite L40 - 15 G seems to belong to the series of PSL48E

  Check again!

  Toshiba Europe page provides a BIOS 2, 00-VICTORY for Vista and WIN-5, 50 for Win XP

  Regarding the upgrade of memory:
  I don't know if your laptop would be m supports 4 GB of RAM. Is that there are different models of L40 and some models supports only 2 GB of RAM!

  Your L40 - 15 G seems to use the Mobile Intel GL960 Express Chipset...
  Check out the details on the Intel page which RAM max can be managed by the Intel GL960 Express Chipset.

• Hi all, I need a little help to try to solve a problem of updating Bios for a long time.

  I downloaded the new update of the Bios on the HP site. But when I try to install the update, the process goes up to only while it presents me with an error. Any help would be appreciated, I am trying to upgrade the Bios for the new firmware in order to perform a better processor. Thank you...

  Error code: 3033

  "GoTo" label not found

  on line 89 of w:\patches\i...ate\windows\installer.wbt

  My system is...

  Compaq Presario SR1339uk

  Serial number: CZB5050HBW

  System number: PS267AA

  Motherboard: Asus PTGD1 - LA

  BIOS version: 3.13 12/14/04

  Operating system: Windows XP Home Edition

  Not sure what's going on here, but here is a suggestion on how to properly install manually the update of the BIOS.

  Assume that you download SP26760.exe (BIOS 3.28)

  Start the update - go to the last message you get before it fails and stop. (must be where it prompts you to close the applications and will be saved).

  Open a DOS (command prompt).    You must be an administrator - so if you're running Vista or Win7 - make sure that 'run as administrator ' at the opening of the box.

  Once in the BACK, type:

  CD FOLDER

  go the the directory of temporary files.

  Then make a

  DIR /S 328.LE ROM

  to find the directory where the update files are located.    Type CD < directory name > to go in this directory (on my system, it was a folder called pft467D.tmp, but it might be different on your)

  CD pft467D.tmp

  Now manually invoke (the prompt back, no windows or the windows file manager) the update, with the appropriate switches.  By omitting the switches can cause other problems, as have reported activation of Windows problems.

  AFUWIN /i328. ROM /pbc

  For reference, on my system, here's what I saw in these folders:

  C:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp > dir

  Volume in drive C is DRIVE_C
  Volume serial number is FE8F-4AA6

  Directory of C:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp

  26/04/2011 11:11 < DIR >.
  26/04/2011 11:11 < DIR >...
  24/01/2006 15:31 524 288 328.le rom
  01/07/2004 10:54 53 248 AFUWIN.exe
  01/07/2004 10:54 amifldrv.sys 6 912
  21/02/2006 18:08 526 374 Installer.exe
  09/05/2006 17:10 sp26760.rtf 1 784
  11/04/2005 10:55 398 696 WBDEG44I. DLL
  6 file (s) on 1 511 302 bytes
  2 dir 110,361,944,064 bytes free

  C:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp > AFUWIN i328.rom /pbc

  It should work OK, however no guarantee if there's something else - but essentially - that's what the installer should do.   If this does not work for you - I wouldn't try to force things - you can make a good motherboard unusable quickly.

  For those who are looking to this announcement - the syntax is for this motherboard only - switches may be different for different motherboards.

  Good luck.!

  -DM (while I am an employee of HP for a long time, the comments/suggestions here are my own, not those of my employer).

• Problem after update bios on Satellite L505-144

  Hi all

  New here, but I know I'll be in the right place.

  I recently installed some updates, such as suggested by temppro. Now whenever my compy starts in Windows 7 64 bit, I get the following message.

  RunDLL
  There was a problem starting C:\Users\Ems and Swift\AppData\Local\prtwst.dll

  The specified module could not be found.

  I post the picture of it, but I don't know how to paste the picture.

  If someone could give me an idea what to do, I'd be really grateful the help... I tried to re - install the bios and by removing other updates... But still this msg appears...

  Thanks in advance

  Paul

  Post edited by: kochney

  just a quick note, everything seems to work fine, just this error msg, which made my nut in :D

  Hello

  Seems that the app is loading at the beginning that creates this message.
  You should check the msconfing (in RUN type msconfig and go to the Startup tab)
  There, you can check what applications are mentioned.

  You can also try to clean the registry with CCleaner. This tool is free and scans the registry and removes garbage from registry

• Problems after update BIOS on Satellite Pro 4600

  There is a problem with the computer toshiba laptop. its the fact do not install any windows OS after the Installer starts running xp there is an error message that says that the drivers of setupdd.sys could not be loaded (error code 14)

  I tried with different CDs with the same error, so I tried the procedure of the ghost image, but all in vain after reboot it is with an error that requires a kernel dll could not be found that I even used a cool ghost image but the same error.

  In fact, I upgraded the bios to a worm recent 2.60 it was beautiful, he started twice and has been used for several hours. the update was suuccesful up and running. It all started when we placed a kingston flash drive in the USB after it was working very well we copied a simple document on drive d, nothing else, it worked for half an hour. After I stopped, and then it was late at night when I started the system fine.i was listening to a song after that, he displayed the error messge system32 driver pci.sys damaged or missed.

  Then I tried everything I knew in windows xp to boot with xp cd and... etc I also formatted the hard drive to try to win98 installation gave an error also, external error to msdos, I think it's the update of the bios that is problem because windows 2000 Professional installation gave a very specific error. BIOS not fully ACPI compatible after pressing F7 in the installer of windows xp the feature ACPI went silent and requested installation good, but during the formatting the drive but it stopped with an error that the disc hard cannot be formatted.

  It's a week now. you have the previous bios file with you maybe which would solve the problem or other.
  Please guide me. I went on toshibas website 25 - 30 times but they do not have the previous bios except the last ver2.60 file

  Hi Usman

  The problem is that you can't roll back BIOS to the previous version. Just service partner chartered Toshiba for this special tool.

  Check it please this document. I have gift? t know if this can help, but perhaps you can better understand the problem http://support.microsoft.com/?kbid=330181

  Good luck!

• Problem installing updates dealing with 80072EFE

  Ive been tring to install the important updates for my computer work correctly but I get error code 80072EFE I looked what it meant, but there is no problem with my internet connection, nor is it a program that seems to block the connection, I even try turning my firewall to ensure it wasn't blocking to install and im now just no idea on how to solve this problem

  Hello

  This rootkit has been known to cause this problem.

  TDsskiller (Rootkit removal tool)
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Then, restart and check the updates.

  To search for other malware use this scanner:

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ==================================================================
  If necessary:

  Run 1 SFC

  Start - type this in the search box-> find CMD at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  ------------------------------------------------------

  Then check out this article:

  You may experience some temporary connection errors when you use Windows Update or Microsoft
  Update to install updates<-- check this="">
  http://support.Microsoft.com/kb/836941

  Do these two and try updates

  Description of the update tool of the system for Windows Vista, Windows Server 2008, for Windows
  Server 2008 R2 Release Candidate for Windows 7 Release Candidate
  http://support.Microsoft.com/kb/947821/

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  =============================================

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

• Someone knows a problem downloading update (42) with Illustrator CC (2014)?

  Creative residence Cloud was me excited to update for a few weeks, so I succumbed this morning.

  The first part was the creative cloud application that succeeded after failing a couple of days.

  I then clicked on the installation for the following in this order because they showed:

  Photoshop CC (2014) successful

  Illustrator Cc (2014) failed

  First Pro CC (2014) failed

  Dreamweaver CC (2014) successful

  Media Encoder CC (2014) successful

  SpeedGrade CC (2014) failed

  That equals 50%. Impressive!

  In any case when I tried the 'retry' as suggested "a total failure".

  I tried one more time, by first closing the application cloud creative and reopening, but these 3 applications still come with the failure message and the "Start over" button

  I really hope that Illustrator and Premiere Pro continue working for me until this mess is resolved. because I've paid of course enough for the privilege.

  CC Adobe has once again met my expectations!

  

  

  As the song says... "What a difference a day made twenty-four hours little... "

  When I started my diet this morning, I opened the creative cloud application and 'Retry' buttons were gone to be replaced by the buttons 'Install' usual index.

  Close the application Cloud Creative yesterday did not have that effect, and it seems that my system had to be rebooted to reset the buttons 'Retry '.

  I decided to click on one and let it also update, before you click on the other; Although the app is designed, you can click on the many and he will put their queue.

  I believe that a question yesterday was a matter of Creative Cloud App, although he made the queue and update the other three updates without problem.

  In the future, I probably not queue updates but make one at a time just to see if my creative cloud experience improves.