Want to 700-074: cannot start if Virtualation Bios HP ENVY activated to win 10

Similar Questions

• Cannot start Windows virtual pc host (I have all the updates)

  -Cannot start windows virtual pc host - cannot start windows virtual pc host process and earlier version of microsoft virtual pc is installed on this computer.

  I have all the updates for Virtual xp downloaded from the microsoft page.  Virtualization tool runs on my system.

  What is the best?  Should I bother trying to get virtual xp installed?  Or can I just use VM ware or something similar to run a virtual system?

  Any suggestions?

  Thank you.

  SYSTEM SPECS: icor7 3.2 Ghz, 24GBz Ram, Nvidia Geforce GTX 480, Windows 7 Pro 64 bit.

  process host and earlier version of microsoft virtual pc is installed on this computer.

  You happen to have Virtual PC 2007 is installed? If so, you need to uninstall that. Click Start, type: programs and features

  Press enter on your keyboard

  See the list of program and make sure that Virtual PC 2007 is uninstalled.

  If your intention is to use Windows XP Mode, make sure that the following two files are installed:

  You must install both files:
  1 Windows6. 1 - KB958559 - x 64 or x 86 architecture that you run
  Restart the system, and then install:
  2 WindowsXPMode_en-we

  Both Windows XP Mode and Windows Virtual PC can be downloaded from http://www.windows.com/business/downloads.
  For more information about system requirements, please visit http://www.microsoft.com/virtual-pc

  Mobile: http://www.notebooks.com/2009/11/23/using-windows-virtual-pc-with-windows-xp-mode/

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Cannot start Windows Virtual PC host process. Check the log of the events system for more details

  Hello

  I am running Win 7 Home Premium 64 and seek to install Windows XP Mode Virtual PC.

  I followed the instructions at: http://www.microsoft.com/windows/virtual-pc/download.aspx and receive the following:

  "Windows Virtual PC. Cannot start Windows Virtual PC host process. Check the log of the events system for more details".

  He does not point me to the "system event log", but he leaves me here. Any advice?

  Thank you

  Hello

  Ideally, this error message indicates that your processor does not support the against hepatitis a (hardware support for virtualization)function.

  Cause:

  Windows Virtual PC and Windows XP Mode are supported only on computers whose CPUs are the HAV feature is enabled. Therefore, if your processor does not support the functionality of HAV or if this feature is disabled, you cannot start the virtual machines in Windows Virtual PC.

  To resolve this problem, follow the steps mentioned in the link below

  Error message about Virtualization-aided material for Windows XP Mode in Windows Virtual PC on a computer that is running Windows 7

  http://support.Microsoft.com/kb/977206

• [Q] cannot start a virtual machine - internal error [SOLVED]

  Hallo,

  I installed Workstation 8 and cannot start a virtual machine - or those created those previous or new. Turn the machine gives me an "internal error."

  My characteristics: Win 7 64-bit (SP1), Core i7 2600 K with 8 GB of Ram

  The newspaper of vmware:

  011 10 - 03 T 19: 22:38.013 + 02:00 | VMX | I120: Log for VMware Workstation pid = 3424 version 8.0.0 = Build = build-471780 option = output
  2011-10 - 03T 19: 22:38.013 + 02:00 | VMX | I120: The process is 64-bit.
  2011-10 - 03T 19: 22:38.013 + 02:00 | VMX | I120: Host = encoding windows-1252 = windows-1252 codepage
  2011-10 - 03T 19: 22:38.013 + 02:00 | VMX | I120: Host is Windows 7 Home Premium, 64-bit Service Pack 1 (Build 7601)
  2011-10 - 03T 19: 22:37.713 + 02:00 | VMX | I120: VTHREAD initialize main thread id 0 "vmx" host 6336
  2011-10 - 03T 19: 22:37.738 + 02:00 | VMX | I120: Settings REGIONAL windows-1252-> user NULL = System = c07 c07
  2011-10 - 03T 19: 22:37.738 + 02:00 | VMX | I120: Msg_SetLocaleEx: HostLocale = windows-1252 UserLocale = NULL
  2011-10 - 03T 19: 22:37.743 + 02:00 | VMX | I120: FILE: FileLockDynaLink: other process validation tools are: available
  2011-10 - 03T 19: 22:38.014 + 02:00 | VMX | I120: Hostname = KOENIG
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP = d fe80::41: e6a3:5dd2:fa9f % 11
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP = fe80::1cf:3682:36e8:4ccb % 17
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP = fe80::1 d 80: 2f6e:979 c: b57d 18%
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP 192.168.1.4 =
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP = 192.168.30.1
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP = 192.168.158.1
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: HOSTINFO 1074415970 @ 3331240Hz-> 0 Hz 1000000000
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: HOSTINFO ((x * 2518163806) > > 23) + 322527338056
  2011-10 - 03T 19: 22:38.037 + 02:00 | VMX | I120: System uptime 321912074 us
  2011-10 - 03T 19: 22:38.037 + 02:00 | VMX | I120: command line: "C:\Program Files (x 86) \VMware\VMware" "-s" 'vmx.stdio.keep = TRUE' "-#" "product = 1; name = VMware Workstation; version 8.0.0 =; BuildNumber = 471780; licensename = VMware Workstation; licenseversion = + 8.0; ""-@ ""pipe=\\.\pipe\vmxf3ce37cf9b6f9c3e;" "D:\VM\Windows 7 x64\Windows 7 x64.vmx".
  2011-10 - 03T 19: 22:38.037 + 02:00 | VMX | I120: Msg_SetLocaleEx: HostLocale = windows-1252 UserLocale = NULL
  2011-10 - 03T 19: 22:38.056 + 02:00 | VMX | "I120: UI connection on pipes '\\.\pipe\vmxf3ce37cf9b6f9c3e' user (null)".
  2011-10 - 03T 19: 22:38.057 + 02:00 | VMX | I120: VMXVmdb: local connection timeout: 60000 ms.
  2011-10 - 03T 19: 22:38.104 + 02:00 | VMX | I120: VmdbAddConnection: cnxPath = / db/connection / #1 /, cnxIx = 1
  2011-10 - 03T 19: 22:38.105 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:483]: VMAutomation: initialize VMAutomation.
  2011-10 - 03T 19: 22:38.105 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:780]: VMAutomationOpenListenerSocket() to listen
  2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:4067]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0
  2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: Past vmx/execState/val of poweredOff
  2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:4067]: VMAutomation_ReportPowerOpFinished: VarEtat = 1, newAppState = 1873, success = 1 additionalError = 0
  2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:4067]: VMAutomation_ReportPowerOpFinished: VarEtat = 2, newAppState = 1877, success = 1 additionalError = 0
  2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:4067]: VMAutomation_ReportPowerOpFinished: VarEtat = 3, newAppState = 1881, success = 1 additionalError = 0
  2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: VMMon_GetkHzEstimate: calculated 3411189 kHz
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: VMMon_RememberkHzEstimate: calculated 3411189 kHz
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: TSC kHz estimates: Memoirs of vmmon 3411189, 3411189, osReported 3401000. With the help of 3411189 kHz.
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU 0 # TSC = 1100186590922
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # 1 TSC = 1100186590888
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: # 2 CPU TSC = 1100186590603
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # 3 TSC = 1100186590637
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # 4 TSC = 1100186590948
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # TSC 5 = 1100186590906
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # 6 TSC = 1100186590898
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # 7 TSC = 1100186590836
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: TSC of measured first delta 345
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: TSC 387 min Delta
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: PTSC: RefClockToPTSC 0 3331240 Hz-> 0 to 3411189000 Hz
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: PTSC: RefClockToPTSC ((x * 4294966339) > > 22) +-1100565306901
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: PTSC: tscOffset-1100187618517
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: PTSC: using TSC
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: PTSC: material TSCs are synchronized.
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: PTSC: PTSC current = 289960
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: Module CPUID initialization failed.
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:869]: VMAutomation_LateShutdown()
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:819]: VMAutomationCloseListenerSocket. Close the socket of the receiver.
  2011-10 - 03T 19: 22:38.125 + 02:00 | VMX | I120: VMX VMDB Flushing connections
  2011-10 - 03T 19: 22:38.125 + 02:00 | VMX | "I120: VmdbDbRemoveCnx: remove Cnx Db for ' / db/connection / #1 /"
  2011-10 - 03T 19: 22:38.125 + 02:00 | VMX | I120: VmdbCnxDisconnect: Disconnect: pipe closed for pub cnx ' / db/connection / #1 /' (0)
  2011-10 - 03T 19: 22:38.129 + 02:00 | VMX | W110: Failed to initialize the virtual machine.

  I scored an error... I tried to reinstall, clean... nothing helps.

  Curiously, I can use the Player app to run all VM´s without problem...

  All solutions?

  Thanks in advance

  Marcus4Aspern

  Is - the name change "vmware.exe" with something else?

• Want to 700-074: dual band Compatible WiFi card want to model #H5Q09AA 700-074

  Eager to upgrade my desire 700-074 single band 2.4 Ghz 1 x 1 technology for a dual band wireless card use 5.0 Ghz internet.

  Currently, the machine has a Ralink RT3290 802.11 bgn adapter Wi - Fi installed initially with the machine

  The processor is Intel Core i5-4430 CPU @ 3.00 Ghz 4 hearts

  Motherboard: MS-7826 (Kaili) Μatx form factor

  Expansion slots: 1 PCI Express x 16 (Gen3.0);  3 PCI Express x 1 (Gen2.0); 1 mini half-length card

  Which card should I which would be compatible with these specifications. Alternatively, where can I go to find this information?

  Thanks for any help.

  You are welcome.  Thank you for the additional information.

  Here's the card wireless installed on your computer according to the Specifications of the product:

  Figure: Wireless card - top view

  • Interface type: PCI express card mini mid-length

• Want to 700-074: update BIOS GUI is in Chinese!

  HP Support Assistant today announced that an update was available for the BIOS in my URGE to 700-074.  However, when the update tries to install, the user interface appear in Chinese, I can't read.  English please!

  Does anyone else have this problem?  Have you found how to get around?

  Thank you

  ENVYable

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

• Want to 700-074: memory slots

  My computer came with 12 GB of memory. I checked and the person who built my computer (Microcenter) put the sticks of memory (4 GB and 8 GB) in slots 2 and 4. I just ordered another stick of memory 8 GB. Should I put the two 8 GB sticks in slots 1 and 3 or 2 and 4, is really important? Also if I add the 4 GB stick in a 3rd slot, which will be OK, I heard say adding a 3rd without the 4th might actually slow down a system? Thank you for your time.

  DaveErving

  Hi Dave,.

  The old HP PC have been capricious on the placement of the DIMMs and the specifications.  If modules of memory DIMM "bind" to the top then your PC cannot start and/or controllers can memory return to operation single channel verses two-channel operation.

  The recent HP PC should be more lenient with mix DIMMS, but that is not guaranteed.  I prefer to use the corresponding DIMMs and fill first the blue locations with the largest DIMM.

  You can download CPU-Z to check the specifications of your DIMMS, and, in addition, the operations of channel memory.  I suggest that you do everything first before adding additional DIMM.  If you find that your PC does not work in dual channel mode then back to microcenter for assistance.

• Cannot start the virtual machine guest after receiving "License expired message" host ESXi 5.5

  I can't start computer virtual invited after receiving "License expired message" 5.5 ESXi host. I am able to copy the vm folder prompted with all its files using WinSCP I had already installed on a desktop computer in the network.

  However, it takes an extremely long time to download the VM [2.5 mb/s], which is of course a different question.

  It seems that I was still on the trial with my vsphere client license, until it expired. I am able to view the virtual machine within the workstation 10, but I can't turn it on. It says "Please install a license to power on this computer" there is no way to install a license anywhere.

  My question is... .will I be able to access this virtual machine if I download on an external hard drive, then add it to 10 VMWorkstation that I possess a current valid license?

  Even if the evaluation license has expired, you should be able to connect to the ESXi host using the vSphere Client and follow the steps mentioned in the article that I posted before you enter the free license key.

  André

• Cannot start the virtual machine after you create snapshop

  I found a strange behaviour. I have a Windows 2008 guest that I just copied in my new box ESXi. I am trying to create a snapshot before upgrading the guest to 2012 Windows operating system. The virtual machine has currently no snapshots. Whenever I have create a snapshot, he succeeds, but then I can't start the virtual machine saying that it does not find the vmdk file delta even though I see there in the data store. In order to start the virtual machine, I have to delete the inventory and it readd, but then I lose the snapshot. I also have another computer virtual running Windows 8.1 that does exactly the same thing. How can I create snapshots safely without damaging the virtual machine? I also tried to create the snapshot while the virtual machine has been activated but that makes crashing and then it does not start again, so I have to repeat the process to remove the inventory and it time. Frustrating. See the screenshots, I have attached.

  Once these virtual machines have been in Hyper-V in the past and I just convert to VMware format using the StarWind V2V converter.

  Yes, for an ESXi host and target you must either select the ESX f.vmdk as format target (growable option is for VMware Workstation), or you must convert the virtual machine once more instead of simply upload the files to an ESXi host.

  André

• Cannot start the virtual machine in a HA cluster

  I installed a HA cluster with 2 hosts configured in it.

  I disabled the admission on the cluster control.

  Each host is a Dell Dimension 9150 with 2.8 GHz CPU and 2 GB of memory.

  I created a virtual machine on a host with 1 vCPU and 512 MB memory.

  However when I try to start the virtual machine, I see the task of 'Power on a virtual machine' fail with the status "the host has sufficient memory resources to satisfy the reserve."

  Why this is happening and how do after that?

  You have the minimum RAM required by ESX ESX 4.0.

  Add more RAM to play also some virtual machines.

  André

• ESX 4.0 - cannot start a virtual machine?

  I have recently install ESX 4.0 evalution in mode. We stopped for the licenses of our distributor who will take 3 to 4 days.

  ESX 4 installs successfully on DL 360 G5 and I use 30 MSA with 7 discs (1.6 to total) as a storage device. It detects the local drives and 1.6 to datastore perfectly. But when I create a simple virtual machine and start reading the BONES of CD ROM it does not start. Is it because I use eval mode. I think ESX 4 is fully functional and active for 60 days. When I start the virtual computer it concludes with the message "Operating System not found" and not even boot from the CD ROM After two or three configurations of chaning of VM, I'm still not able to understand. Can someone tell me where I am doing wrong. In ESX 3.5, I ran the virtual machine correctly but in ESX 4, I'm not sure. This is a new server and ESX 4.0 is also new facility. I also appreciate if someone tells me a guide that shows step by step how to create a virtual ESX simple machine. I have not yet install VC 4 as I have not yet received the licenses.

  Thanks in advance

  Please check the following things

  1, "to connect to the power on ' should be checked for the CDROM in editing parameters

  2, Goto VM BIOS and check if the CDROM is the first boot device.

  3, check the CD-ROM drive to start a physical machine

  4, check if you connect the CD-ROM drive to a remote location.

• iDrac6 - cannot start the virtual iso file:

  I just bought 12 x T610 I put in all the country. I know I could call the support for this, but I tried and there is no knowledge on this subject was available when I called the support:

  The problem: I'm unable to boot from the virtual media (iso file)

  I don't know how to do this, but I understand that I need to start the remote console and select virtual media > launch virtual media.

  Next, I add the iso file I want to boot from.

  I tried to start it, but it does not work.

  When I try to map the drive (still in the launch of virtual media), I get the error:
  Disk error
  Or other virtual media is detached or
  Redirection of virtual media for the selected virtual disk drive is already in use.

  I tried this from dozens of different computers and it is not going.

  As first boot device, I tried Virtual CD/DVD/ISO, but it didn't go.

  So. How do I file to mount the ISO and boot on them? IDRAC is loaded from another server using IE8 on the same subnet as the server that I am trying to start (gigabit). The iso file boots very well when mounted using vmware etc. (190 MB)

  I found the solution from dell support:

  I had to open idrac. go to system > console/media, and then click configuration and activate the virtual support.

  I thought that I had already checked this, and the cause is iDRAC has a blue for the active tab text, and black for the tab you are NOT in.

  Example:

  Redirection of the console and Virtual Media

  Configuration

  While Configuration is NOT active! You must click on Configuration, even if it is not marked as a link. Blade programmers :)

• Cannot start multiple virtual machines.  Maybe I corrupted the model

  We had problems with disk space, and I was looking around to see if he had left garbage data store.  I am very new to VM, but even though I'm new I'm responsible for helping maintain.  So I learn a lesson the hard way.

  I found a number of virtual machines in organized which did not seem to relate to existing models.  For example, we have a model name 000729-Server2008 Server 2008, that they are in lm401\729.  But it appers to be a clone of 729 to lm401\16.  I'm going to guess that 16 was the original version and changes or clones have been made for him and we are now sitting to 729.

  Then I moved 16 in another data store, but it failed because there is a lock on the hard master.  So I moved everything back.  Now, when we try to start up of VMs driven from this model we get "file & lt; filename not specified & gt; not found"I went back and tried to deploy and supply on the model but I get

  Impossible to deploy virtual machines in the pool of resources 'resgroup-131.

  • Not to feed one or more virtual machines.

  • Error when powering on a virtual machine '2008 X 86'.

  • Cannot power on the operation on a virtual machine
    carried out because one of the files is locked. Consolidation of the
    virtual machine can solve this problem.

  • The operation cannot be performed because a file is locked.

  So I cancelled and tried to consolidate while I get

  Host '172.31.7.111' reported an error. A disk error has occurred: the parent of this virtual disk could not be opened. Host '172.31.7.111' reported an error. A disk error has occurred: the parent of this virtual disk could not be opened.

  Can someone help me?

  This article may help: http://www.vmware.com/kb/1007969

  If you have found this helpful at all prices please points using the correct or useful!  Thank you!

• WANT to 700-074: BIOS update failed HP ENVY 700-074

  I intend to update Windows 10 soon.  HP recommends to update the drivers and BIOS before upgrade.  the original BIOS is listed as FRIEND 80.15 in msinfo32 dated 19/09/2013 (and in the setup of the BIOS as KAI 80.15). The computer came with 8 VICTORY and has been updated to WIN 8.1.  I tried to update the BIOS with the update listed for computers 700 - 0xx WANT to sp66018.exe.  I downloaded and ran the update with the HP Support assistant help.  A DOS window appears, and the update completed.  Norton AntiVirus has been disabled and all programs were closed during installation.  I created a USB file as the recommended window.  After that restart the BIOS version has not changed... Even after several reboots (and stops) and disconnect the power cord (I did some housekeeping to clean the inside of the computer of the dust) the version of the BIOS is still the original.

  What is the correct BIOS update?  There are two listed for my machine - 80.20 Rev. (I used) may 28, 2014

  and 80.24 Rev.A 7 April 2015

  Which is the correct one?  I don't want to install a bad!

  It is possibly disable startup secure in the BIOS for the update to be successful?

  Apparently, the dates are correlated with the version I had.  I tried to install one, be one originally installed... I installed the 80.24 Rev A version dated April 7, 2015 and it updated without problems.

• Cannot start the virtual machine on VMware Workstation 12.1.0

  The host machine is W2008R2, VM is the same. When im trying to start the current VM I see VMware screen, then "download files" screen loading, then VMware loading new screen and etc.

  Log file is attached below.

  An update of the firmware could certainly help.  After you install the update of the firmware, it can be useful following the instructions from the motherboard to reset the firmware configuration by default (if its configuration is not too heavily customized) and then reconfigure with custom settings, you might need.  Check that you have disabled in your TXT firmware settings too... who's going to stop us from using the capabilities of VT - x from the host.  And, where there is doubt, the error message is not really pleasant on cyclical food... Some systems cannot put a change of configuration of VT - x into force without being truly disconnected from power for a while, so if in case of doubt, he put it off and remove the power outlet for a few seconds.

  Your CPU is certainly capable of VT - x and support all the VT - x features required by VMware Workstation... Simply to force the system to allowing the use of VT - x and then it should start to work well.

  See you soon,.

  --

  Darius