Cannot start Windows Virtual PC host process. Check the log of the events system for more details

Similar Questions

• Windows could not connect to the System Event Notification service. As an administrator, you can view the log of the events system for more details

  Original title:

  Office blocked in the classic theme.

  This morning when I started my computer, I noticed that it displays the following error message:

  "Windows cannot connect to the System Event Notification Service service. This problem prevents limited users to logon to the system. As long as administrator, you can review the system the event log for more details on the reasons, the service has not responded. »

  I went through the event log and found three errors:

  Name of the error: Service Control Manager
  Event ID: 7022

  "The Windows Audio service hung on starting."

  Name of the error: Application Popup

  Event ID: 875

  "Pilot atksgt.sys has been blocked by a load."

  Name of the error: Service Control Manager

  Event ID: 7000

  "Atksgt service failed to start due to the following error:
  This driver has been blocked by a load.

  There is no new hardware or installed software, virus/malware analyses provided no results. The only effect I can see is that the office is stuck in classic mode and options for the Aero themes are disabled.

  Any help is appreciated.

  I would like to use system restore to set up Windows in a few days.

• Cannot start Windows virtual pc host (I have all the updates)

  -Cannot start windows virtual pc host - cannot start windows virtual pc host process and earlier version of microsoft virtual pc is installed on this computer.

  I have all the updates for Virtual xp downloaded from the microsoft page.  Virtualization tool runs on my system.

  What is the best?  Should I bother trying to get virtual xp installed?  Or can I just use VM ware or something similar to run a virtual system?

  Any suggestions?

  Thank you.

  SYSTEM SPECS: icor7 3.2 Ghz, 24GBz Ram, Nvidia Geforce GTX 480, Windows 7 Pro 64 bit.

  process host and earlier version of microsoft virtual pc is installed on this computer.

  You happen to have Virtual PC 2007 is installed? If so, you need to uninstall that. Click Start, type: programs and features

  Press enter on your keyboard

  See the list of program and make sure that Virtual PC 2007 is uninstalled.

  If your intention is to use Windows XP Mode, make sure that the following two files are installed:

  You must install both files:
  1 Windows6. 1 - KB958559 - x 64 or x 86 architecture that you run
  Restart the system, and then install:
  2 WindowsXPMode_en-we

  Both Windows XP Mode and Windows Virtual PC can be downloaded from http://www.windows.com/business/downloads.
  For more information about system requirements, please visit http://www.microsoft.com/virtual-pc

  Mobile: http://www.notebooks.com/2009/11/23/using-windows-virtual-pc-with-windows-xp-mode/

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Yahoo messinger does not start, he said: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. » __

  Yahoo messinger does not start, he said: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. »

  UM. I have no idea what that means, I never had that in my 20s I was using a computer.  Please help, someone!

  You can get the Chkdsk to run in the General Windows interface by following these instructions?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking. Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive. If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  Your command prompt Mode works without failure or a boot?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  It works if you test with another user, you will need to create one to test with?

  System Restore and the System File Checker is able to fix anything?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228#appliesTo

  Have you tested malware?  I see a lot of recommendations here for programs such as -

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntispyware
  http://SUPERAntiSpyware.com/

• Messenger: The application has failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. How to fix?

  My Messenger was working normally, then I shut down my computer at lunch. In return, I turned it the Messenger wasn't working and this appeared:

  "The application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details"

  Can someone help me to fix it? Thank you.

  Hello

  they will help you with your questions/problems Messenger when repost you the link below in the Messenger forums

  http://windowslivehelp.com/product.aspx?ProductID=2

• When I opened e-mails. doc or pdf, this message appears: "the application failed to start because its side-by-side configuration is incorect. Check the log of events applications for more details. »

  Original title: side-by-side configuration is incorrect

  When I opened, try opening some emails. doc or pdf, this msg appears: "the application failed to start because its side-by-side configuration is incorect. Check the log of events applications for more details. »

  I'm going to log events, but how to solve the problem by putting the RIGHT configuration to?

  Thanks in advance

  Hello

  1. when the question is is produced?

  2. you remember of any change to your computer before the problem?

  3. are you using a 32-bit operating system or a 64-bit?

  Please visit: What are the information in the event logs? (Event Viewer)

  In the meantime, follow these steps and check if they help.

  Step 1:

  I suggest you install the Visual C ++ 2005 Sp1 Runtime and check if the problem persists:

  Microsoft Visual C++ 2005 SP1 Redistributable Package (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=200b2fd9-AE1A-4a14-984d-389c36f85647&displaylang=en

  Step 2:

  If this does not resolve the issue, I would have you done SFC scan on your machine to check if the problem is related to missing or corrupted system files.
   
  Aziz Nadeem - Microsoft Support
  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Micro 7, printing with hp4215... stops printing... screen on printer reads... wrong cartridge... then see the product documentation for more details... cannot find

  Micro 7, printing with hp4215... stops printing... screen on printer reads... wrong cartridge... then see the product documentation for more details... cannot find

  http://welcome.HP.com/country/us/en/support.html

  Link HP drivers and manuals.

  http://welcome.HP.com/country/us/en/contact_us.html

  Details of HP.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• ESXi 5.1 cannot start a virtual machine with Admission check has no memory error

  I see that there were a number of people who have this error and adjusting the reserve memory for the VIM under resources system has solved this problem, but not for me. My booking in the VIM process setting is '0'. Vital signs:

  Reference Dell T110 II server

  4 GB OF RAM

  Intel Xeon processor E31220 @ 3.10 GHz

  4 cores of the processor

  Hard drive 500 GB

  ESXi version 5.1

  A Linux VM with 4 GB RAM allocation, 2 cores of CPU and 45 GB of storage.

  Error I get on a attempted to start:

  Has no power on the virtual machine.

  Could not power on VM: check for Admission has no resource memory see the management of VMware ESX Resource Guide for management information settings.

  Group vm.4757: invalid memory for VM vmm0:Mitel_Applications_Suite allocation settings. (min: 524288, max:-1, minLimit:-1 actions:-4, units: pages)

  Group vm.4757: can not admint VM: admission of memory has failed. booking request: 536579 pages

  I changed the memory to the VM all the way up to 1 GB, no change.

  I played a bit with the allocation of memory VIM, no change.

  A fact interesting is that the Allocation of resources for the tab host watch memory @ 1747MB capacity, capacity reserved @ 0MB and available @ 1747MB capacity, but I have 4 GB of RAM and the vSphere Client shows it under the Configuration tab.

  Take a look at this blog post: http://www.vmwarearena.com/2012/07/failed-to-power-on-vm-admission-check.html

• Cannot start Windows and I can't find the Vista disc.

  Hi all, this is the problem. After his stop with the option to install updates, I restarted my laptop, then he said "Windows failed to Start. Other options include Safe Mode and last good known Configuration. The two option did not work. My Windows Vista computer came with my Sony Vaio laptop and I couldn't find the disk. After various Internet research, looks like the only one that works is to have the Vista disc.

  How can I fix this without that the disc of Vista? Any help is appreciated. Thank you.

  Hello

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• Cannot start Windows 7 message and passed through the repair. SYSKEY problems?

  I received a call that the security program, we have installed last year had been compromised. We bought this company safety program. Then they asked to get on computer, which they did. Then they showed through the event viewer that the computer has been used by others. Started sounding fishy and then they wanted to buy us another program. I told him that I wanted him out of the computer, I would call them back. The guy then pulled up the syskey and typed a password and is out. Worked very well after that but now it works and now I received a message that microsoft cannot be started. The sykey is too ride with my original to enter the computer password?

  Examine your computer to be totally compromised.  You follow the recommended procedures for identity theft.

  Do not use the computer or go online for nothing. Re-install your system or have done to you.

  Notify your banks, credit cards, the police and the post office.

  Never allow people to connect to your computer, unless you are quite comfortable, that they are worthy of trust.  You have been scammed.

• Mode XP error: cannot start Virtual PC Host Process...

  I installed XP Mode, download carefully the x 64 version. But when I try to start it, I get, "Cannot start Windows Virtual PC Host Process".

  Hi SibTiger,

  This happens if your PC does not support hardware virtualization based.

  How to confirm your PC can run Windows XP Mode
  http://www.Microsoft.com/Windows/Virtual-PC/support/configure-BIOS.aspx Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Cannot start Windows Live Messenger

  Since a few days ago, my Windows Live Messenger does not start I get the following message appears in the dialog box

  -----------------------------------------------------------------------------

  C:\Program Files\Windows Live\messenger\msnmgr.exe

  The application has failed to start because its side by conbfiguraiton is incorrect. Check the log of the events application for more details...

  -----------------------------------------------------------------------------

  Since then, I had uninstalled the Messenger and downloaded the Windows Live Essentials 2011 once again and reinstalled Messenger, but the same message always pop when I try to run MSN.

  Please notify

  Hello

  they will help you with your questions/problems Messenger when repost you the link below in the Messenger forums

  http://windowslivehelp.com/product.aspx?ProductID=2

  ___________________________________________________

  For the different Forums for Windows Live Applications, select the link below
   
  Welcome to Windows Live Solution Center
  http://windowslivehelp.com/

• Cannot start Windows, Windows Setup does not detect the hard disk, Bootmgr is misiing

  I have a few problems on my laptop [Acer 3810 t]

  -The first problem
  My mobile give me screen "cannot start windows' who have 2 choices: run the Startup Repair tool and boot normally. I chose to fix it, but nothing happens and stuck "starting windows" and gives unmountable boot volume 'blue screen '. the Dungeon of blues screen appear (for laptop is a not restart). So I turned off my phone and turn it back on it. the "could not start" screen again and I chose to start normally. but the result is negative. My portable Dungeon cannot start windows. Because of that I am using the advanced boot option and choose all the boot type such asit cannot load the safemode, last configuration etc, but the result is the same, you cannot start windows. in safe mode, its stuck in loading fileinfo.sys. I do not give up to try again with the advanced boot option. until I have a bad situation. My laptop can only 1 file in safe mode and blues screen do not appear again (my laptop only return at the beginning of start or restart)

  -The second problem
  because it cant solved, I want to reinstall my laptop. My OS is Vista 32 bit (pre-installed). I want to install the new operating system, windows 7. I use Dsik Flash bootable USB to install Windows 7. But in the BIOS, it is detected as a USB HDD. So I set my BIOS to load USB HDD to the first order. the installation can be done, but only until the "start Setup" screen and its deadlock. I have it wait up to an hour, but nothing happens. So I'm going to BIOS, change SATA mode to IDE mode AHCI. Then load the USB and go "installation program start screen. but the new problem is the installation of window does not detect my hard drive. So I can not choose the place to install the operating system. I have to load the driver, but I did not. Again to load the configuration to AHCI and IDE, until I get my HDD can detected in IDE mode. So I think I can move easily, I choose custom installation and choose the hard drive to install the operating system. But unfortunately, at the beginning of the process, after choosing the OS, the Installer gives error if installation location the installation failed. (I forgot the error message)

  -The third problem
  So far, I can't spend 'startup begins' as well in mode IDE and AHCI. Also bootmgr in my hard disk is missing, so I can't go to move the startup repair or the startup option in my HDD as before

  What is the error code that you got with blue screen?

  I think that there is a problem with your drive HARD check that by contacting acer...

• Error message: problem loading parameters and check the event log or ask the administrator

  My wallpaper, the desktop icons and most of my documents are gone.

  I have Vista Home Premium and a couple of days and I connected my desktop background was changed. Several desktop icons are missing, and a message came up saying there was a problem loading my settings and check the event log, or ask the administrator (me) for more details. All my "Favorites" were missing in the sidebar and my documents and recorded images folders are empty. Microsoft customer service tells me there is an error in my code for the identification of product (from the Windows Activation in systems and Maintenance) so I can't help out.

  Any thoughts? Thank you!

  Hello, G25

  It is likely that your user profile is damaged. I would advise to create a new user account and test if you get any errors. If everything works as expected under the new user account, you can start to recover your account profile by following the steps on the following link: difficulty of a user profile is corrupted

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The application has failed to start because its side-by-side configuration is incorrect, please consult us or application event log the sxstrace.exe tool of command line for more details?

  I am using Cyberlink PowerDirector 9 and the above message keeps popping up. Help?

  Hello

  Thanks for posting your question in the Microsoft Community!

  The problem may occur if your computer does not have the correct C++ runtime components for your system type. (X 86 or x 64).

  We will try the following methods and check the result.

  Method 1:

  Install the latest Microsoft Visual C++ has helped users fixing the issue.

  Later supported Visual C++ downloads

  http://support.Microsoft.com/kb/2019667

  Method 2:

  You can also try uninstalling and reinstalling Cyberlink PowerDirector 9 to check if that helps:

  For more information, see the following link:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  For more details on this topic, see the event log using Event Viewer. Please see the link below for more information on how to use Event Viewer to check the error message or information:

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Please check the information in Event Viewer and let us know the question briefly to provide you with a better solution.

  I hope that helps!

  If the problem persists, or you need help on Windows please keep us informed.

  We are here to help.