want to 700: Ho I change the name of the computer

Similar Questions

• changing the computer name root

  I want to change the computer name added to the initial setup of the computer. I tried several suggested solutions and none worked.

  The easiest way to do what you want is to create another user with privileges to adminstrive account and name what you want.

  Then copy all your data and configure it as you wish.

  When you are satisfied, remove the original account.

  Edit: Didn't see page 2

• Change the computer name in the network discovery, view old and new names and get error code 0 x 80070035

  I changed the computer names of computers each with windows 7 and a home network sharing. Network discovered each poster now the old and new names. I also have an error code 0 x 80070035.

  How can I get rid of the old names?

  Hello

  Are you able to access computers using the names?

  Step 1: Check out the link to learn how to delete the old name and create a new name:

  Change the name of your computer:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-computer-name

  Step 2: Refer to the section below for more information to correct the error 0 x 80070035 and steps.

  Open the homegroup troubleshooting utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Error 0 x 80070035 appears if you are not able to access the network computer. Follow the instructions in the thread below if you are faced with a similar question:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-error-0x80070035-when-trying-to-share/d8168c72-D51C-41C3-8B8F-3b6bb7f65f43

  It will be useful.

• I want to know how to restore the computer to its factory settings, when I bought from a private party and have an administrators access code

  I want to know how to restore the computer to its factory settings, when I bought from a private party and have an administrators access code

  Hello

  What is the brand and model of the computer?

  The best method is to contact the computer manufacturer for help on how to set the computer to its factory settings.

  Hope this information helps.

• I want to update my windows on the computer and I get 8007005

  original title: 80070005
  I want to update my windows on the computer and I get 8007005 what to do please help

  Ellaaa

  Try it, you should get the follow-up troubleshooting links below these pointing in the right direction.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update

• I want to disable a product but the computer on which it has been recorded on is no longer functional. How can I activate this product on a new computer?

  I want to disable a product but the computer on which it has been recorded on is no longer functional. How can I activate this product on a new computer?

  The product is CS3 Web premium. It was recorded on 2 computers in 1998 and the two are no longer working. I have all the disks and the original serial number.

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations

• Want to 700-410: how install the drivers and the graphics card in a fancy 700-410 destop

  I want to install a graphics card in my computer, but I want a step by step tutorial to make sure I'm doing things. Please tell me what I'd do anything first to last

  I want to install a Zotac GTX 750 TI in my computer

  I appreciate the help,

  Thank you

  Hi there @IanSchm,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you are looking for assistance to change the video card. I'll be happy to help you.

  Here is a document for the upgrade and maintenance Guide see page 18

  I also found a YouTube video on the way to change video card, graphics card.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• I want to know how to change the administrator account.

  Hi guys, I accidentally created an administrator account. He says now that my main account is not an administrator. I would like to know how to change the main administrator account and get rid of the administrator again one that I just created. Thank you! (Urgent)

  Andrew

  Andrew,

  It's actually very simple:
  Administrator account:
  1 - open a session under the new administrator account
  2. - click on the Start button.
  3 - type changes to accounts, press ENTER.
  4 - click on your main account.
  5 - click on change the account type.
  6.-s' ensure that the administrator is selected.
  7 - click change the account type.
  Remove the administrator account:
  Make 1-3 above.
  -Click the account you want to delete.
  -Click on remove the account.
  Fact!

• How to change the computer name of existing desktop computers linked clone pool?

  Hello

  I'm curious about something that has developed in our Organization.  New guidelines came down and we have to change the name of the computer for all of our offices to meet the new criteria.

  I have many of our users is on the offices of Linked-Clone (automated pool, dedicated, assignment see 5.1) which will have their names have been changed.  I use a 'model' for the name of the computer.

  I tried this before by simply change the settings of the pool, and then recompose the pool.  Recompose worked well, but NONE of the virtual machine names have been changed.  All machines, recomposed just fine, but keep the old name of the computer (non-compliant).

  How can I change the name of the computer of my clone in an existing pool offices?  Maybe I have something wrong.  I'm doing it instead of having to create a new pool and move the persistent disks.  I would like to change the name in the settings of the pool and recompose, but it did not work.

  Scenario:
  See 5.1

  Automated cloning related pool

  Assignment of dedicated (persistent disks)

  Thanks in advance

  It is not possible to change the name of existing workstations by modifying the settings of the pool. There is no way to make this happen automatically and in doing so manually would not seen happy.

  Unfortunately, for dedicated pools, you will have more work to do. If you do not use Persona you detach the persistent disks and recreate virtual machines in the pool with this disk to create a new virtual machine with a new name to be generated.

  If you use Persona you could remove all virtual machines and have Persona to extract profile data down to the virtual machine that would be entitled to the user when they connect then. This will cause all user installed programs go, but I hope that's not common if you are already using linked clones.

  I encourage to go to the next page, click on the feature request form link and publish information on what you're trying to do:

  https://www.VMware.com/support/policies/feature.html

  Notifications about features are reviewed by VMware and if you can get enough of your friends/colleagues notice to users to ask something often a solution will grow in any kind, nature or form.

  Hope this helps.

  -Mike

• Want to use JDAPI to change the setting RPRROREPORTSERVER (11g)

  
  Hello:

  I need to change the RPROREPORTSERVER setting at the form level, through many forms of 11 g. Is it possible to use JDAPI to do this?  Currently, if I want to change blocks or points I start with getBlocks or getItems and iterate through each block and item and set the new values. Y at - it an equivalent syntax for parameters?

  Thank you!

  You could get an iterator for all parameters using getModuleParameters as

  FormModule module = FormModule.open("my.fmb");
  JdapiIterator iter = module.getModuleParameters();
  

  You would then pass through all the settings as you would with your blocks or objects; you want to get a module setting you may edit it like this

  ModuleParameter param = [...];
  if(param.getName().equalsIgnoreCase("your_parameter"))
    param.setStringProperty(JdapiTypes.PARAMETER_INITIALIZE_VALUE_PTID, "your_value");
  

  For more information on the JDAPI check the javadoc:

  http://www.Oracle.com/technetwork/Developer-Tools/Forms/documentation/jdapi904019-131445.zip

  see you soon

• Laptop HP Pavillion 15-p051u: HP Recovery Manager should be able to change the computer creating media?

  I'm doing the original backup set of DVDs for a laptop HP Pavillion (15-p051us) 15. Due to an error, I'm afraid to continue.
  I got to speak with a HP tech person, who helped me to pass the second record to DVD. now, I'm trying to start the burning of the third DVD of backup recovery. When I click on the button to launch the "HP Media creation" I get interrupted with a window which shows:

  ***********************************************
  * User account control *.
  ***********************************************
  *                                                                                          *
  * Want to allow the following program *.
  * to make changes to this computer?                      *
  ***********************************************
  * Program name: HP Recovery Manager *.
  * Verified Publisher: Hewlett Packard Company *.
  * Original folder: hard drive on this computer *.
  Program location: "C:\Program Files\ (x 86)."
  * Hewliett-Packard HP Recovery Manager\ *.
  *    rebecca.exe"\CRM                                                   *
  ***********************************************
  *                           Yes     No                                              *
  ***********************************************

  I obviously don't want to change the program to backup for me when I'm not finished to make the backup. (As I've noted, two DVD's burned and verified. Four still needed.) But when I click on the button 'No' to say "don't edit my computer now until I finished the last four DVD" disappears from the user account control window and the creation of HP recovery media is not engaged. My first two questions are (1) why my computer wants to interrupt the creation of my 6 DVD recovery until the work is done? (2) it would be safe for me to click on the 'Yes' button or what may cause a fatal error in the backup process? In a note, I would like to report that the person HP with whom I spoke on the phone mentioned the fact that the error can be caused by lower DVD media. To counter this notice I tried three DVD good nine successive State. I used more than a dozen DVDs of this package on another computer. With these, he had no problem with registration, verification or later to read these DVD. If my guess is that it is unlikely three of them failing in the HP computer. I don't think that's the problem. I read through 60 first found elements that were identified when I did a search on the website of HP using the key phrase 'Recovery Manager change'. This has proved a total of 7499 possible Articles, but I looked through 60 without success.

  Answer Yes to user account control. This is the irritating feature of Windows that assume at all times that you don't know what you're doing. HP Recovery is harmless and should have access to the files on hard drive.

  For example, you could get the same question when you try to install the software for a printer, etc. and would answer Yes - you would answer no if a piece of malware slipped on your system and UAC taken he's trying to make changes and pointed out.

• Impossible to change the computer screen brightness samsung laptop

  recently I installed internet explorer 9, after that iam unable to reduce my brightness.but screen before I can able to adapt with the key Fn + arrow down, but subsequently don't not able to adapt, but I can't able to contol volume with the Fn + left arrow key & right keys. but unable to brightness control... so, what's the problem?

  Hi david,

  1. What is the operating system installed on the computer?
  2 are you able to increase brightness using FN + arrow upward?
  3. What is the model of your laptop?
   
  
   
  I suggest you follow the methods and check if it helps.
   
  Method 1: Change the brightness by following the link and check whether or not your laptop brightness changes.
  To enable or disable the Adaptive brightness
  http://Windows.Microsoft.com/en-us/Windows7/adjust-your-monitors-brightness-and-contrast
   
  Method 2: Update the drivers keyboard and graphics cards and check if that helps.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
   
  I hope this helps.

• I want to erase all content on the computer I have dell with windows xp

  Bought a new computer, to reset my LDP to give to a family, but I want to clear all of my content. Thank you

  It depends on what mechanism you have for the restoration of Windows and if you care to donate in working order (I assume you are).

  If you have PC Restore Dell (hidden partition on the hard drive), which allows you to restore the computer to its "fresh coming from the factory" State.  Uninstall all software "free trial", including antivirus and security suites.  Trial periods are no longer valid.  Use the right tool:
  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?LG=English&CT=United+States&docid=20080710133834EN&product=home&version=1&PVID=f-home
  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507
  Then for good measure, carefully clean the free space and soft space with an application like Eraser.

  If you have a real Windows install CD, disinfect the drive with Darik Boot and Nuke and then do a clean Windows install (you will need the drivers from Dell site with Dell's Service number).

• You want to reinstall Windows XP on the computer.

  Original title: bought s/h computer had windows on it but when it crashed I took to my friend? and he put a bad copy in I bought Office home & student recently to solve all the problems but cant get computer accept all responses will be grateful for

  bought new office home @ student wishes to delete everything on computer and restart computer bought s/hand and as am a learner need help thank you

  Hi liloldlady,

  If you have important documents on the computer, you can take backup of data in any external device.

  The front desk & CD will help you to install only the Microsoft Office application.

  For the installation of Windows XP, you will need a Windows XP installation CD.

  For more information, please follow this link.

  How to install or upgrade to Windows XP

  Reference: Install, reinstall, or uninstall Windows 

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Want to change the computer name of PC/crumbs to PC/CrystalDawn without reformatting or open new account

  Hi all!

  I hope someone can help me with this; I'm trying to change my computer name of PC/crumbs to PC/CrystalDawn without having to reformat or open a new account CrystalDawn and manually migrate thousands of items saved so far, as suggested by another user in this Forums MS 2009 post on my computer:

  http://social.answers.Microsoft.com/forums/en-us/vistaappearance/thread/88d24e9-C944-4DC8-86cd-6057ccfc04a2

  It seems a little silly that I have to go through so much trouble to make such a minor change and back.  If someone could explain if and why it must be so annoyingly difficult just make this small change, perhaps understanding would help me decide if I would go through with the whole rigamarole if it is really necessary.

  I guess my other question will be, is it really necessary?  The people at the other end of files displayed in a portal online or any other place see the ' PC/crumbs' or 'Documents/Crumbs/filename.doc' or do they see just "door"?  I'll keep it like that if it's only visible as of the crumbs in my computer, but since I work online and send files of professional document a lot, a lot, I certainly don't want will be called "crumbs".

  Any help would be appreciated because I don't have the $60,00 by every 10 minutes if I had to call Microsoft itself.

  See you soon! ~ AwmostDone

  If you want to rename your computer, here's how: http://www.ehow.com/how_5124750_change-computer-name-vista.html

  However, I think you mean you want to rename your account. You can do, but the record of account will be always called crumbs here:C:\Users and everything related to saving the files. The files will always be completely when you put them and nothing's wrong turn.

  If you download the file to a service such as skydrive, the file is stored on the server of the site and has nothing to do with your computer more (so they'll just see).

  I know it's annoying that you cannot rename the folder of the user himself. Maybe they'll fix it someday...

  teengeek.freehostingcloud.com Microsoft community contributor