PC installed disks, but does not recognize Droid.

Similar Questions

• Logical disk management does not recognize a slave drive

  I installed an internal HD as a slave. The BIOS sees the drive, Western Digital Lifeguard sees the drive (it checks OK) with the appropriate drive letter, PMagic sees the drive before starting, but the logical disk manager does not recognize the drive or the drive letter.

  Using Windows XP, SP3 with latest updates

  Hello

  1. The hard drive is recognized in another computer?

  If this isn't the case, then the problem could be the hard drive itself. If he is found, then the problem is in your computer. In this case, run the diskpart.exe utility.

  Use the list partition command and see if the partition is detected. If so, then I suggest you to format the drive in diskpart.

  However, take a return of all data on the hard drive before the format by plugging it into another computer. Help with backup data, see

  Backup: what, how, where

  http://www.Microsoft.com/protect/data/backup/about.aspx

  To use the Diskpart.exe utility, follow these steps:

  1. type diskpartand press ENTER to open the diskpart tool.

  2. type list diskand press ENTER. A list of available hard disks.

  3. type select disk =[n]

  n s Specifies the number of disc the disc to receive the focus.

  4. type list partition

  This command displays the partitions listed in the table to partition on the current drive.
  5. type select partition =[d]

  This command selects the specified partition and gives it the focus.

   d s Specifies the drive letter or mount point path of the partition to receive the focus.

  6. type format drive: / FS: NTFS/Quick

  For more information about commands, see

  A Description of the Diskpart command-line utility

  http://support.Microsoft.com/kb/300415

  Now you should be able to see the slave drive in Solution Explorer.

• I have 2 computers that are running windows 7 prem 64 bit family. I'm trying to set up a home group, but does not recognize my extra computer. It is on the network. I have a netgear router wnd3500

  I have 2 computers that are running windows 7 prem 64 bit family. I'm trying to set up a home group, but does not recognize my extra computer. It is on the network. I have a netgear router wnd3500.

  Hi Mark,

  Thank you for writing to Microsoft Communities. The description of your problem, I understand that you have problems setting up a homegroup with Windows 7 computer. Please correct me that I misunderstood.

  
  

  Mark, please don't worry I'll try my best to resolve the issue.

  I suggest to go through the following websites, which provide a detailed description on the homegroup and how to set up.

  Home Sweet homegroup

  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

  Homegroup from start to finish

  http://Windows.Microsoft.com/is-is/Windows7/help/HomeGroup-from-start-to-finish

  If you're still having trouble to set up the residential group, please let us know. We will be happy to help you.

• Install Windows 8 does not recognize the system drive

  I built a new machine (chart below). Since this is a new machine and not an upgrade, I bought Win 8 Pro 64 bit OEM to do a clean install. The SSD is my system disk that Windows 8 will be installed. Four data drives are mirrored, two for the other two. Construction went perfectly. The BIOS recognizes all six disks: 1 SSD, 4 HDD, 1 DVD.

  Insert and boot the disk of Windows 8. Accept the EULA, enter the product key. Arriving at the page "Where do you want to install Windows?", only four hard disks are listed. The SSD (installation to go) is not found by Win 8. ??? I tried to change ports SATA, cables, power supply - no difference. For each new change of hardware, the BIOS still sees everything. This isn't a hardware problem.

  The question remains: why the installation of Windows 8 does not recognize the SSD drive. All five disks are on AHCI. I'm not in RAID.

  I spoke with crucial technical support of all (manufacturer of the SSD). They were also surprised that the drive does not appear in the list.

  Does anyone have a solution? I spent all the money on hardware, as well as the new version of Windows and I cannot install it.

  This is the real kick in the teeth: Microsoft won't support me. The OEM of Windows 8 version is the same as manufacturers, such as Dell or HP. Support told me I had the support of the manufacturer. HA! I am the manufacturer. Either that or upgrade from an earlier version of Windows. This means that any that a new construction machine will get ZERO assumption of Microsoft. All just great.

  Thank you in advance for any assistance.

  Windows 8 Pro 64-bit (full version) - OEM
  Intel Core i5 - 3570K
  Card mother GIGABYTE GA-Z77X-UD5H
  Crucial Ballistix 2 x 8 GB DDR3 1600
  Crucial M4 2.5 "128 GB SSD (system disk)
  WD Green WD30EZRX x 4 (data readers) 3 TB drive
  Rosewill Challenger-U3 ATX Mid Tower Case
  SeaSonic M12II 620W 620 Bronze PSU
  ASUS DVD writer

  The DSS must be LOW LEVEL FORMATE.

  Once, there may be no other [HDDs] not connected to the SATA ports.

  Install Windows 8 Pro now.

  [Edit] Can someone please mark this as answered? I can't because I posted the question. Thank you.

• getting an error of cartridge, cartridge is there but does not recognize

  the computer does not print cartridge error, it does not recognize the black cartridge. I removed and installed several times, is based on my printer?

  Contact the manufacturer of your printer and see if there are others who have had the same problem (there may be, there seems to be a common complaint).

  If it is a cartridge refill, rebuilt or third party, it can never work with your printer.

  Give more information, such as the make and model of the printer. is extremely useful. Without specific information, you will get very general assistance.

  SC Tom

• Why won't my Windows Media Player rip the CD more? Play selections from the library, but does not recognize the CD in the drive to rip.

  Help, please! I've been rip CDs to the library and everything was fine. Then I put a cd in and I could hear this spin and charge but then... nothing. He said "not responding" in the taskbar above, next to windows media player.
  I closed and reopened it. Different CD. Same thing. I restarted the computer. Once again, an another CD.but the same thing.
  It plays all the songs that are in my library but when I'm in the "rip" tab, there is a message saying to start, "insert a CD into the CD drive. I do and as before, I can hear it spin and charge, but the window of windows media player does not recognize that there is a CD in the drive. In the upper right corner is corner it say 'disc (E)' is this a hardware problem or software? Please help me to solve it!

  http://support.Microsoft.com/GP/mats#tab2
   
  Has a troubleshooting guide automated for you.
   
  --
  ..
  --
  "dee4156" wrote in message news: bc5b21d1-9fa9-48f9-a84a-eb439997ea79...
  > Please help! I've been rip CDs to the library and everything was fine.
  > Then I put a cd in and I could hear this spin and charge but then... nothing.
  > In the taskbar above, he said "no answer" next to windows media
  > player.
  > I closed and reopened it. Different CD. Same thing. I restarted the
  > computer. Once again, an another CD.but the same thing.
  > It plays all the songs that are in my library but when I'm in the "rip".
  > tab, there is a message saying to start, "insert a CD into the CD drive.
  > I do and as before, I can hear it spin and charge but windows support
  > the player window does not recognize that there is a CD in the drive. In the
  > top right corner, it says 'No disc (E)' is this a software or
  > hardware problem? Please help me to solve it!
   
   

• When I plug in a gamepad PS2 using a PS2 to USB, windows 7 knows it is plugged in, but does not recognize the guitar. Calibration will not do anything.

  I've calibrated without success. It recognizes the plug-and - pkay in PC, but does not save it.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• DVD Sony player appears installed but does not recognize any CD or DVD

  I just bought a Sony Optiarc AD7260 DVD RW drive and installed in my system. I am running Win XP Pro sp3. My Bios says the drive is recognized by the latter and in the Device Manager in Windows, the drive shows up and says that "this device works properly." However, any disk I put in the drive (self burned cd / self burned dvd / retail music cd / dvd retail game / virgins DVD) never presents itself as being accessible. When the drawer goes in, I get the icon of the cd spinning for about 15-30 seconds, but then it goes back to the usual pointer. If I try to access the drive in Windows Explorer or any other program, it does not appear. I tried to use ImgBurn to get media info I had placed in the drive (blanks & with data) but it still says "incompatible medium installed" in the drive. The Optiarc is my 4th Sata device, 3 others are hard drives. The system is a dc7100 HP Compaq with 3 GB of ram. Any suggestions?

  Hello.

  Do you have the old disk, or access to another drive, try in the computer?  If these work then you will have a faulty drive.  It is possible to have a defective out of the box.  Also try a different SATA cable.  These can sometimes be problematic.

• downloaded and installed the reader, but does not recognize the key on the back of the card to complete the installation

  downloaded and installed students and teachers edition of acrobat Pro DC, does not complete the installation.  Have a trial version expired always on systems, help

  Hi cherylc10083122,

  Make sure you use the correct serial key, please check using this link, find the serial number of your product Adobe quickly.

  Kind regards

  Nicos

• want to do a restore system with disks, but does not I need HELP!

  I am eager to the system recovery on my HP computer I have discs of recovery system 1 and 2 and the extra recovery disk. but when I put in the drive of the installation wizard is not coming and I don't know how to run, I made the recovery for anw had the windows installed so my computer was as good as new once again, but this time it does not work I need help please! Thanks in advance

  Looks like you are trying to run the Windows recovery. You don't want to do. BTW, please make sure that you have backed up your data on external media because after a destructive restore full factory all of your own files will be gone.

  So let's try and start the computer from the recovery discs, you did. Place 1 disc in your drive and restart the computer. When you start your computer, you will see a message that says something like "Press Esc for Boot Menu". Press this function key. Then use your key to select your CD/DVD drive, press ENTER, and the HP system recovery process will begin. Use the advanced option to make the complete factory restore. MS - MVP - Elephant Boy computers - don't panic!

• Power supply pc-need to install disks CS1 does not support the Lions!

  I have a new computer running OS Lion and must install disks CS1, and then upgrade to CS5. He told me that he does not support power pc applications. What should I do?

  You will not be able to install on MAC Lion CS1.

  If you install CS5 with you, you can install it directly on the Lion, not need to install CS1 at all. You simply keys CS1 CS5 series and during the installation.

• Bought a new Mac, installed Lightroom but does not open application

  Whenever I try to open Lightroom it is said that it has been installed successfully, but once the page open starts I get two error messages. The first one says - "Error occurred when attempting to Modules of Chance." Then the second appears and says "internal error occurred: failed to create required folders: / Users/Overton/Library/Application Support/Adobe/Lightroom develop Presets.

  Tried uninstalling and reinstalling several times and we looked on the forums and support but do not know who to turn to next. Thank you

  Hi Ryano,

  The Lightroom inside the Application Support folder could have hurt Lightroom permissions preventing to write about it, which can cause this error.

  • Navigate to the following folder: /Users/ [user name] / Library/Application Support/Adobe/Lightroom.
  • Highlight the Lightroom folder and choose file > get information.
  • Under sharing & authorization, make sure you have privileges to read & write. Otherwise, click on the padlock icon at the bottom right, enter your password when prompted, then click the only entrance to reading and select read & write.

  For more information, see the following link: error changing modules

  Concerning

  Sarika

• Upgrade of RAM do I need to reconfigure my PC I install Go, but does not show it.

  My CQ56 has had an upgrade from 2 GB to 4 GB and does not show the upgrade, and I see no difference in speed. My question is I have to reconfigure the system.

  Hi FloydJ,

  This number CN is actually your serial number. Click on the link in my last post for the product number, it will show you where to find and give you an example for this.

• Reads music CDs, but does not recognize blank CD - r

  I have long used Nero or Roxio to burn some CD - Rs without problem. I recently tried to install Exact Audio Copy (EAC), which has worked flawlessly for years on my old computer, but all attempts to plant resulted in the Blue Screen Of Death, so I uninstalled it. I can still play music CDs, but none of the burning (Nero, Roxio, Windows Media Center) programs recognize blank CD - r (and Yes, I always use the same type and brand of CD - R). I also tried the Microsoft Fix It solution center, who acknowledged the problem but no solution offered. Any suggestions?

  Hello

  1. is this Microsoft fix it tool display error message associated with CD/DVD not getting not recognized?

  You can follow the steps below and check if that helps you solve the problem.

  You can temporarily try to remove or uninstall the writing software CD or DVD of third party such as Nero or Roxio installed on the computer and check if you are able to access the CD / DVD. If it works fine, you may need to contact the manufacturer of the software to check if you need to make changes to write to DVD.

  If you have Norton Installed on the computer, you can try disabling the software Norton temporarily to see if it solves the problem. Subsequently reactivate after verification.

  If the previous step fails, then check the condition of the disc on the computer using Manager devices and post back with the details.

  Also check the updated drivers available for the DVD player by visiting the website of the automaker.

  Open the Device Manager

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

• Inateck BR1001 installed OK but does not appear as a playback device

  Hello

  I am using an Inateck BR1001 bluetooth streamer in Windows 8 to listen to music from Windows Media Player to my external speakers. Now the device Inateck disappeared from the "playback devices" list although it is always visible, paired and connected via the Bluetooth settings.

  It does seem to be an obvious way to restore as a playback device. I tried to uninstall as a BT device and rediscover & match but it is still not listed as a playback device.

  Any ideas?

  Thank you

  Richard

  Hi Richard,

  Thanks for posting your query in Microsoft Community.

  I appreciate the efforts that you have taken to solve this problem yourself. It could have happened due to corruption the Audio drivers.

  1. Did you change in your system prior to this problem?
  2. Do you have an error code or error message during the installation of the Bluetooth device?

  Follow the methods and check them off below if it helps:

  Method 1: Run hardware and devices troubleshooter.

  • Right-click on the present "speaker" icon on the lower right corner of the system tray.
  • Select the option reading devices.
  • Now, click the read tab.
  • Right-click on the device and make sure that the devices turned off Show is checked.

  If the problem persists, try Method 2.

  Method 2: Set Bluetooth device as a value by default after you activate the disabled device.

  I recommend to update the audio drivers and then check if it helps.

  Update your sound driver in Device Manager:

  a. type in Control Panel Search box , and then click Control Panel

  b. click on system and Maintenance

  c. under Device Manager, click on hardware and devices

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  d. expand sound, video and game controllers

  e. right click on your Audio Controller, and then click Properties

  f. Select the driver tab

  g. click the Update driver button.

  h. select automatically search for an updated driver.

  Windows will now look for an update for your Audio drivers locally and on the internet and then will guide you through the process of installing the driver.

  You can check the link for more information below:

  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  If the problem persists, try Method 3.

  Method 3: run the audio Troubleshooter.

  You might be able to solve certain problems by running a convenience store will automatically fix some common problems with audio.

  Follow the steps to run the Troubleshooter:

  a. press the keys Windows + C on your keyboard to show the charms bar.

  b. type Troubleshooting , click Troubleshooting under settings.

  c. now, select Search and solve problems.

  d. Select troubleshoot Audio playback.

  Install the latest device drivers Bluetooth device/hardware manufacturer website.

  Try the above steps and let us know if it helps. For assistance feel free to post your questions in the Microsoft forums. We will be happy to help you.

  Thank you.