Want TS M7: Card its not detected

Similar Questions

• Memory card is not detected on motorcycle G2

  Memory card is not detected on motorcycle G2

  Hi pls memory card delete and restart and try otherwise then your memory card is dead

• Internal microphone is not working, receiving the message: sound card is not detected.

  Original title: my internal MIC does not work...

  .. I get a message saying that my sound card is not detected... all of a sudden...

  Is - fixable without buying anything?

  Hello

  What is the brand and model of the computer?

  I suggest you follow these methods and check.

  Method 1: Refer to this link and check if it helps.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  If the method above does not work, proceed to the next method.

  Method 2: Try to update the audio driver and check if it helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

• Sims 3 (win7) and "device 0 cannot run this title, no video graphics card supported not detected."

  Hello

  I just got the Sims 3 for Christmas, and I can't get it started.

  I just bought a new p7-1126 of hp computer that meets all the reqs as documented on the site of AMD System. (win7 64 bit, 1 TB hd, 6 GB ram, amd quad core 2.4 GHz processor)

  This computer has an amd radeon hd 6550d graph with / 3 gb (I think) (which is more than 128 MB recommended)

  and the drivers are up to date.

  I get the error message "device 0 cannot run this title, no video graphics card supported not detected" and I can't seem to do anything to solve this problem.

  I've uninstalled and reinstalled the Sims3 deluxe/ambitions three times now, with the expansion of ambitions installed so the third time.

  I did a lot of other things as suggested in line when I did research but nothing works.

  Help is appreciated and I hope we can get this fixed a problem. Thank you!!

  Hello

  Please provide information of the log of the event viewer.

  Information on the Event Viewer log shows that there is a problem with your memory (0xc0000005 error code).

  I suggest you run a diagnosis of memory on your computer and check if all goes well.

  Click on the links below and follow the instructions on the article to test memory on your computer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  Provide us additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• Portege Z10t-a - SIM card is not detected after Win 8.1 upgrade

  Hello world

  I have a Z10t-A. Portege Toshiba Pro win 8.1 recently, just upgraded to 8.1 Win.
  Before the upgrade, I could use the sim card to connect to the VPN, but since the upgrade the sim card not detected. I use an application called "AirCard Watcher".

  I tried the latest version of the driver 'EM7305 '.

  Visit the page of the Toshiba UE driver
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp
  Choose here:
  Laptop
  Portege
  Portege Z series
  Z10T-A Portege
  All the
  8.1 Windows 64-bit
  LTE pilot

  Now you should see two pilots LTE (5.2.1401.4045 and 3.5.1308.3911)
  I recommend you test the two drivers.

  Before you start the installation of the driver, the former current driver should be deleted.

• LAN card does not detect on Satellite A80?

  my 80 A does not detect the marvell yukon lan Card... He istn even shown in the hardware Manager. so I can't update the drivers...

  don't know what to do, so please help, tia

  TeXec

  Hi TeXec

  Have you seen some extraordinary things in Device Manager? For example yellow exclamation?
  In addition, you can try to change the setting of "Device Config" in the Setup of the System of "The installer of the OS" BIOS to "all devices".

  Good bye

• B50-30 AIO - SD card reader not detected after upgrading Windows 10. Solved.

  AIO B50-30 (F0AU002US) SD card reader was not detected after that I upgraded to Windows 10. I have installed all the appropriate drivers found on the page for assistance with on Lenovo a fix. Device PCI Device Manager had no driver.

  I installed the driver below and my problem has been fixed.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownT...

  I hope this helps someone else?

  Mod edit: System model added to the front of the subject line to improve visibility / clarity

  Thank you for the help with the Forum. I find the help I need with my new Lenovo.

• PXI-8532 DNET card is not detected in MAX

  Hi all

  I use NI PXI-1031(4 slot PXI chassis). I have the following cards in the respective locations
  Slot 1 = controller PXI-8106
  Slot 2 = PXI-6259 card (I)
  Location 3 = card(DI,DO) PXI-6509
  4 = Card (DNET) PXI-8532 accommodation

  Max (Measurement & Automation Explorer), I expect the cards above (PXI 6259, 6509 & 8532) to be detected under devices and Interfaces. But only cards and DIO are detected in MAX under deported systems > PXI > devices and Interfaces.
  PXI-6259 (PXI1 Slot2)
  PXI-6509 (PXI1 Slot3)

  The unit net card, PXI-8532 is not detected in Max MAX shows / detects the DNET card?

  In MAX, I chose the menu Tools > NOR-DNET > RT Hardware Configurations. Then a window prompt you for IP address of RT. After you enter the IP address, I pressed OK. A message appears that no device is found.

  Can someone help me how to detect card DNET in MAX and make the configuration of the port DNET?

  DNET - 1.6.4 driver version

  Thank you
  Raja

  I try to answer two questions:

  1. the new APUI is compatible with the former, but if you use screws with the old APi you need to replace the screws with the new. There is a white paper related to the download page and here it is again that explains how.

  2. the devicenet driver does not yet support the plugin for the view of the PXI chassis. It appears under devices and Interfaces, and the name is not editable either. Currently the driver uses the numbers in the order of detection if several cards are present.

  Two things will look in our next version before the end of this year.

  DirkW

• Win 7 Pro. Card reader not detected. Card reader does not appear in Device Manager, or the computer.

  Windows 7 Pro.  Dell desktop computer.

  My integrated card readers (there are 4) do not work.  They do not appear in Device Manager.  They do not appear in the computer.

  In Control Panel > programs and features > I uninstalled the Realtek card reader.  Then installed latest version of the Realtek site.

  Control Panel > troubleshooting > hardware and audio > configure device > says hardware changes could not have been detected.

  Tried system restore, but it failed.

  What should I try?

  Thank you

  Hi Bruce,.

  Thanks for posting your query on the Microsoft Community.

  With the publication of the description, I understand that the card reader does not work on your machine, Windows 7 Pro. I will certainly help you get this fixed number.

  I appreciate your efforts to resolve the issue.

  Since you've already tried several troubleshooting steps for the fixed number. I wish to inform you that this problem can occur because of compatibility issues. I suggest you refer to the suggestions of Work Sam Varkey responded on December 28, 2009 in the below mentioned thread and check if this is useful:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/memory-card-reader-not-working-with-Windows-7-x64/6f8f5122-70dd-48D4-A083-09fdef8612e3

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Card SIM not detected blackBerry Smartphones

  Since the application of the first PRIVATE update we continue to receive message SIM card not detected.  Seems to drift in and out of the connection to the cellular network.  What could be the problem? Jumping is not a behavior even so the Rogers network signal is fine.

  Obviously seems to have worked - remove the SIM and put it again.

• PCMCIA wireless network card is not detected: 1058 error: cannot start service

  Help, please!

  I'm under WXP Pro for over 2 years and I've been connecting to the internet via a pc wireless card in my laptop with no problems PCMCIA slot. Suddenly last week, he started randomly disconnect and reconnect, and now it is gone completely.

  I bought a new WiFi card and still does not work. I checked the Device Manager and driver of cardbus PCMCIA works well as all other devices. The driver for the wireless card and another bound network drivers not start little matter what I try and how many times I try. I tried another laptop and my old card and once again work very well.

  The device driver I try to start have the error

  "Error 1058: the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him."

  The card driver is installed, but not from, it is as if the laptop cannot detect or see the card in the slot

  Please help; I have difficulties to find someone with the same problem after a week of searching the Web.

  Hello

  This problem may occur if the service is disabled or if the service is disabled for the hardware profile you are currently using.
  To activate the service follow these steps:

  1. click on start, point to programs, point to administrative tools and then click Services.
  2. double-click on the service that is not started.
  3. click on the tab to open a session.
  4. check that the service has not been disabled for the hardware profile that you are using. If so, click Activate.
  5. click on the general tab, verify that the service has not been disabled in the Startup Type box. If Yes, click Automatic to have it start when you start the computer.

  What is described here in the article MS knowledge base
  http://support.Microsoft.com/kb/241584

• C850-1JV Windows XP satellite card its not in Device Manager?

  Hello

  However, I done a workaround for my laptop and installed a dual boot system with windows xp and 7 - xp for my audio productive work and 7 for the rest.

  XP was a bit problematic, because there is only some drivers only offered by Toshiba.
  So I searched, loaded and installed all but a (simple) 'PCI-Kommunikationscontroller' (don't know the exact translation and has decided to maintain the German designation given by my OS) with the hardware ID PCI VEN_8086 & DEV_1E3A & SUBSYS_FB311179 & REV_04 and totally lack of the sound card.

  The second fact is the worst for me, because it's a basic function I need.

  I tried to install the Realtek HD Audio WDM_R2.73 - installation rail drivers, xp wants to restart, and then there is no card present.
  Device Manager appears in the tree of audio, video and gamecontroller only:

  AMD High Definition Audio Device
  Audicodecs
  Legacy-Audiodriver
  Legacy-Videorecordingdevice
  MediaController
  Videocodecs

  The system is Windows XP 32-bit SP3, if that's relevant.

  I'm very grateful for any help.

  Best regards

  The Ser

  Hello

  You have the latest model cell phone which was offered with Win8 pre-installed 64 bit. Windows XP Home edition is not supported for older models or so I don't think that you will be able to find a driver Windows XP Home edition.

  What you can try is to check the sound card manufacturer's website. Chip the soundcard on your machine is VB6-ALC269Q-GR of Realtek, according to me, try so googled around. Maybe you'll find somewhere.
  Although I think that hardware manufacturers provide no support WXP for a long time now. Material standards are changed since Vista launch, and there is no support more.

  I just hope that you have created a recovery media until you started to install Win7 and WXP.

• My ati mobility radeon HD 5000 series graphics card is not detected when I upgraded to windows8

  Hello

  I have a hp pavilion dv6t-3100 entertainment notebook pc.

  recently, I bought windows8 and updated.

  System couldn't mobily detect ati radeon HD 5000 series (microsoft corporation - WDDM v 1.20)

  I'm getting the device as a status

  This device cannot start. (Code 10)

  {Operation failed}
  The requested operation failed.

  in the Device Manager.

  HP did not provide the bearable drivers for windows 8.

  I installed the driver that has been given for windows 7

  Please help me find the drivers

  This model is not designed and qualified for windows 8, there was no windows 8 at the time this PC has been designed. This PC has not seen pilots of dual graphics for windows 8 that is why you may not be able to use discrete graphics card (AMD). your PC is running on Intel Graohic card only.

• Satellite Pro L10 - wireless network card is not detected in Win7

  Hello

  I have a dual boot with XP and Win7 Pro.

  If I install the wireless driver from the download on XP site, no problem.

  I tried the same procedure using the download wireless driver on the partition Win7 using a) driver XP b) driver Vista & c) the Vista driver in compatibility mode. Nothing worked and it is even not a yellow exclamation in Device Manager, so the wireless card point don't has not recognized at all.

  Same problem with Ubuntu Linux.

  In XP, it is recognized as "INPROCOMM IPN2220 Wireless Lan Card".

  Any ideas?

  The entry in Device Manager is right and so must be included in Windows XP Home edition.
  This old model of laptop is not supported for Win7 and on the download section Toshiba WLAN I cant find driver for Intel PRO/Wireless 2200 WIRELESS network card.
  Googling around, I see many people have the same problem on different models of old laptops.

  Have you tried to find the driver Googling autour?

• Unit SDHC memory card does not detect

  Original title: memory card SD PNY for my camera

  I can't get my computer to recognize my camera SDHC memory card.  He behaves as if nothing has been inserted into the port.

  Thank you

  Hi archjunkie16,

  1. Don't detect other USB devices on the computer?

  We recommend that you connect the memory card on another port and check the result.

  If the problem persists, download and run Microsoft Fix it and check the result. To do this, try the following steps:
  a. check out the Tips for solving the problems of USB devices
  b. click Microsoft fix and run successfully.
  c. restart the computer and check if the problem persists.

  Visit our Microsoft answers feedback Forum and let us know what you think.