PXI-8532 DNET card is not detected in MAX

Similar Questions

• Memory card is not detected on motorcycle G2

  Memory card is not detected on motorcycle G2

  Hi pls memory card delete and restart and try otherwise then your memory card is dead

• Internal microphone is not working, receiving the message: sound card is not detected.

  Original title: my internal MIC does not work...

  .. I get a message saying that my sound card is not detected... all of a sudden...

  Is - fixable without buying anything?

  Hello

  What is the brand and model of the computer?

  I suggest you follow these methods and check.

  Method 1: Refer to this link and check if it helps.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  If the method above does not work, proceed to the next method.

  Method 2: Try to update the audio driver and check if it helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

• Sims 3 (win7) and "device 0 cannot run this title, no video graphics card supported not detected."

  Hello

  I just got the Sims 3 for Christmas, and I can't get it started.

  I just bought a new p7-1126 of hp computer that meets all the reqs as documented on the site of AMD System. (win7 64 bit, 1 TB hd, 6 GB ram, amd quad core 2.4 GHz processor)

  This computer has an amd radeon hd 6550d graph with / 3 gb (I think) (which is more than 128 MB recommended)

  and the drivers are up to date.

  I get the error message "device 0 cannot run this title, no video graphics card supported not detected" and I can't seem to do anything to solve this problem.

  I've uninstalled and reinstalled the Sims3 deluxe/ambitions three times now, with the expansion of ambitions installed so the third time.

  I did a lot of other things as suggested in line when I did research but nothing works.

  Help is appreciated and I hope we can get this fixed a problem. Thank you!!

  Hello

  Please provide information of the log of the event viewer.

  Information on the Event Viewer log shows that there is a problem with your memory (0xc0000005 error code).

  I suggest you run a diagnosis of memory on your computer and check if all goes well.

  Click on the links below and follow the instructions on the article to test memory on your computer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  Provide us additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• Portege Z10t-a - SIM card is not detected after Win 8.1 upgrade

  Hello world

  I have a Z10t-A. Portege Toshiba Pro win 8.1 recently, just upgraded to 8.1 Win.
  Before the upgrade, I could use the sim card to connect to the VPN, but since the upgrade the sim card not detected. I use an application called "AirCard Watcher".

  I tried the latest version of the driver 'EM7305 '.

  Visit the page of the Toshiba UE driver
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp
  Choose here:
  Laptop
  Portege
  Portege Z series
  Z10T-A Portege
  All the
  8.1 Windows 64-bit
  LTE pilot

  Now you should see two pilots LTE (5.2.1401.4045 and 3.5.1308.3911)
  I recommend you test the two drivers.

  Before you start the installation of the driver, the former current driver should be deleted.

• LAN card does not detect on Satellite A80?

  my 80 A does not detect the marvell yukon lan Card... He istn even shown in the hardware Manager. so I can't update the drivers...

  don't know what to do, so please help, tia

  TeXec

  Hi TeXec

  Have you seen some extraordinary things in Device Manager? For example yellow exclamation?
  In addition, you can try to change the setting of "Device Config" in the Setup of the System of "The installer of the OS" BIOS to "all devices".

  Good bye

• B50-30 AIO - SD card reader not detected after upgrading Windows 10. Solved.

  AIO B50-30 (F0AU002US) SD card reader was not detected after that I upgraded to Windows 10. I have installed all the appropriate drivers found on the page for assistance with on Lenovo a fix. Device PCI Device Manager had no driver.

  I installed the driver below and my problem has been fixed.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownT...

  I hope this helps someone else?

  Mod edit: System model added to the front of the subject line to improve visibility / clarity

  Thank you for the help with the Forum. I find the help I need with my new Lenovo.

• Win 7 Pro. Card reader not detected. Card reader does not appear in Device Manager, or the computer.

  Windows 7 Pro.  Dell desktop computer.

  My integrated card readers (there are 4) do not work.  They do not appear in Device Manager.  They do not appear in the computer.

  In Control Panel > programs and features > I uninstalled the Realtek card reader.  Then installed latest version of the Realtek site.

  Control Panel > troubleshooting > hardware and audio > configure device > says hardware changes could not have been detected.

  Tried system restore, but it failed.

  What should I try?

  Thank you

  Hi Bruce,.

  Thanks for posting your query on the Microsoft Community.

  With the publication of the description, I understand that the card reader does not work on your machine, Windows 7 Pro. I will certainly help you get this fixed number.

  I appreciate your efforts to resolve the issue.

  Since you've already tried several troubleshooting steps for the fixed number. I wish to inform you that this problem can occur because of compatibility issues. I suggest you refer to the suggestions of Work Sam Varkey responded on December 28, 2009 in the below mentioned thread and check if this is useful:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/memory-card-reader-not-working-with-Windows-7-x64/6f8f5122-70dd-48D4-A083-09fdef8612e3

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Card SIM not detected blackBerry Smartphones

  Since the application of the first PRIVATE update we continue to receive message SIM card not detected.  Seems to drift in and out of the connection to the cellular network.  What could be the problem? Jumping is not a behavior even so the Rogers network signal is fine.

  Obviously seems to have worked - remove the SIM and put it again.

• PCMCIA wireless network card is not detected: 1058 error: cannot start service

  Help, please!

  I'm under WXP Pro for over 2 years and I've been connecting to the internet via a pc wireless card in my laptop with no problems PCMCIA slot. Suddenly last week, he started randomly disconnect and reconnect, and now it is gone completely.

  I bought a new WiFi card and still does not work. I checked the Device Manager and driver of cardbus PCMCIA works well as all other devices. The driver for the wireless card and another bound network drivers not start little matter what I try and how many times I try. I tried another laptop and my old card and once again work very well.

  The device driver I try to start have the error

  "Error 1058: the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him."

  The card driver is installed, but not from, it is as if the laptop cannot detect or see the card in the slot

  Please help; I have difficulties to find someone with the same problem after a week of searching the Web.

  Hello

  This problem may occur if the service is disabled or if the service is disabled for the hardware profile you are currently using.
  To activate the service follow these steps:

  1. click on start, point to programs, point to administrative tools and then click Services.
  2. double-click on the service that is not started.
  3. click on the tab to open a session.
  4. check that the service has not been disabled for the hardware profile that you are using. If so, click Activate.
  5. click on the general tab, verify that the service has not been disabled in the Startup Type box. If Yes, click Automatic to have it start when you start the computer.

  What is described here in the article MS knowledge base
  http://support.Microsoft.com/kb/241584

• Want TS M7: Card its not detected

  My Skype can't detect a sound card. I have no problem reading audio, but I can't use my built-in microphones or any other mic. My computer can find all the microphones, I have a range of turtle implemented right now, and it can be found. The problem is that there is no incoming audio signal. I know that this microphone works because I used it on other game systems and laptops without problem. Do I need a driver? If so, does anyone know where I can find one?

  I found the problem. My sound card has been disabled. In fact, many drivers had been disabled. Do not know how. In any case, I would mark it resolved but I have not figured out how yet, haha.

• My ati mobility radeon HD 5000 series graphics card is not detected when I upgraded to windows8

  Hello

  I have a hp pavilion dv6t-3100 entertainment notebook pc.

  recently, I bought windows8 and updated.

  System couldn't mobily detect ati radeon HD 5000 series (microsoft corporation - WDDM v 1.20)

  I'm getting the device as a status

  This device cannot start. (Code 10)

  {Operation failed}
  The requested operation failed.

  in the Device Manager.

  HP did not provide the bearable drivers for windows 8.

  I installed the driver that has been given for windows 7

  Please help me find the drivers

  This model is not designed and qualified for windows 8, there was no windows 8 at the time this PC has been designed. This PC has not seen pilots of dual graphics for windows 8 that is why you may not be able to use discrete graphics card (AMD). your PC is running on Intel Graohic card only.

• Satellite Pro L10 - wireless network card is not detected in Win7

  Hello

  I have a dual boot with XP and Win7 Pro.

  If I install the wireless driver from the download on XP site, no problem.

  I tried the same procedure using the download wireless driver on the partition Win7 using a) driver XP b) driver Vista & c) the Vista driver in compatibility mode. Nothing worked and it is even not a yellow exclamation in Device Manager, so the wireless card point don't has not recognized at all.

  Same problem with Ubuntu Linux.

  In XP, it is recognized as "INPROCOMM IPN2220 Wireless Lan Card".

  Any ideas?

  The entry in Device Manager is right and so must be included in Windows XP Home edition.
  This old model of laptop is not supported for Win7 and on the download section Toshiba WLAN I cant find driver for Intel PRO/Wireless 2200 WIRELESS network card.
  Googling around, I see many people have the same problem on different models of old laptops.

  Have you tried to find the driver Googling autour?

• Unit SDHC memory card does not detect

  Original title: memory card SD PNY for my camera

  I can't get my computer to recognize my camera SDHC memory card.  He behaves as if nothing has been inserted into the port.

  Thank you

  Hi archjunkie16,

  1. Don't detect other USB devices on the computer?

  We recommend that you connect the memory card on another port and check the result.

  If the problem persists, download and run Microsoft Fix it and check the result. To do this, try the following steps:
  a. check out the Tips for solving the problems of USB devices
  b. click Microsoft fix and run successfully.
  c. restart the computer and check if the problem persists.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• USB internal card reader not detected by Windows 7 Pro 64

  The return of the story is this: my Dell Inspiron 546 recently dropped when the HARD drive failed terminally.  "Rather than replace the HD, I opted for the upgrade of ' with a refurbished desktop computer.  I'm done with a Dell Optiplex 760 MT, which I am very happy with.  He has a new 128 GB SSD mounted and I have a new 1 to Seagate Barracuda disk HARD ready to go in it, when I get a longer SATA data cable for it.

  In any case, I got a few pieces off the Inspiron to go in the Optiplex: memory card reader 2-4 GB of RAM, DVD - RW and media 3.5 "internal.  The RAM of works well (taking the system to a total of 6 GB).  The DVD - RW works fine (once I activated the SATA port in the BIOS).  However, the card reader does nothing.

  I plugged into a vacant USB connector on the motherboard, which has been marked something like "INT USB".  However, Windows doesn't see it, and it does not show in the Device Manager.  It's as if she is not there at all (no lights, nothing).

  This card reader worked fine on the Inspiron (which was an AMD Athlon 64 machine, but running Windows 7 it 32 b).

  Any ideas?  I had a glance through the BIOS and can't see anything obvious.  I assumed that being a USB device, it would just spring to life, but I do not.

  The Optiplex has the following important elements:

  Intel Core 2 Duo 3 GHz (E8400)

  Intel Q43 chipset

  Transcend SSD 128 GB

  6 GB of RAM (2 x 1 + 2 x 2)

  (HD 3000 memory) integrated Intel graphics card

  DVD - ROM (standard adjustment)

  DVD - RW (from the Inspiron).

  The fixed.

  First, to use the USB header, you should disable the "floppy" in the BIOS.  I tried this but it didn't work.  However, States manual service, you should disable the front disk to install the player, so I unplugged the drive, put under tension, then stopped again, plugged in and restarted.  I also disconnected and re connected the cable at the end of the drive.

  According to these fixed it, I don't know, but now it's the hunky dory, seen in the maps of Manager and reading of the device as it should.