Wanted: Hp envy freezes at startup screen win7

Similar Questions

• Qosimo F25 freezes on startup screen...?

  Help!

  My brand new Qosimo F25 (OK dad bought in the United States for me) freezes on the screen (the one with the small blus of the bars of progression from left to right) Windows startup. It worked yesterday and I used it OK, but today it will not go beyond this page. Sarts in safemode, OK? In the start screen noticed time had shifted before 9hrs? Did a system restore to yesterday. Still no luck.

  Clues. Thank you

  Hello Holly ;)

  Well, it s strange. You upgrade the memory module or you plug in external devices on your device? It would be very interesting to know, if you see exclamation points in Device Manager.
  Please give me a feedback.

  Good bye

• EliteBook 8540w freezes at startup screen Windows after the installation of 2 x 4 GB

  Hello

  I have a laptop Elitebook 8540w. I wanted to upgrade to 2 x 4 GB 2x2gb RAM memory. I did buy a kit of 2 x 4 GB I wanted, instead, I bought two chips of memory from 4 GB of HP.

  After having replaced the modules of the notebook does not start.

  What has been done:

  -Restore default bios

  My first question is: I realize, it is best to purchase a kit of 2 matching tokens, but it's a must?

  Thanks in advance,

  2worlds.

  Hi 2worlds,.

  Your Elitebook 8540w is a commercial product and for your question more exposure, I would post in the trade forums. Here is a link to the forum Commercial Notebook.

  Thank you

• installation of Windows 7 freezes on startup screen

  I am trying to install windows 7 pro 64 on a new Board from biostar itx a68n-5000. He gets in regard to starting windows with the colored balls and freezes.  BIOS sees readers, Ive tried affecting SATA AHCI, IDE, IDE's Legacy and no help. I also tried loading from a USB key which is bootable and still nothing, Ive built a few computers and have never had this problem. The Board of Directors is set to SATA 3 and I use 1 SATA disks, I thought everything was backward compatible.  Any help please

  installing windows 7 from windows with colored balls and freezes.

  0- Turm off your PC, delete all devices USB + mouse, unplug the cord, remove Bios battery, press and hold the button for 1 min while battery disconnected and the bios is out, release and sale battery and plug it. try to install again (do not connect any USB)

  0- update your BIOS

  or

  1- change the configuration of SATA in BIOS on 'compatible'.

  or

  2- disconnect any drive HARD or SSD, USB cables

  or

  3- Check your bios, if there is a Secure boot: ON, then turn off the POWER

  or

  4s ' there is "lunch CSM: in your bios, enable it."

  or

  5-disable the 'support of diskette drive' in the Bios.

  or

  6- turn on SATA AHCI in the Bios and enable the SATA Native mode.

  or

  7- use Rufusand install windows USB

  or

  8- get out your SATA, put it in another PC and install windows, then replace your first computer and install the drivers.

• Laptop freezes on Windows startup screen (start)

  Freezes my laptop Envy15-3000 starting up.  It makes only to the Windows startup screen and then icons Microsoft stop moving.  This has happened since Tuesday (8/12).  I ran checks and the memory and hard drive (quick and full) test came back positive - i.e. without problems.  I finally decided to reformat yesterday (8/14).  He gets throughout the process of reformating until he wants to start the system for the "first time" (I guess this will be the last time it restarts in the recovery process) and always freezes on Windows startup screen.  If I try to hard cock off and try any other start up option I can think (Safe Mode, etc.), it says failed to retrieve and asks me to try again, get the details or Save Log.  When I try again, it goes back to freezing.  Therefore, I am now in an endless loop of another attempt of the retrieve to access the windows screen start freezing.

  All I want to do is wipe the hard drive and reload everything.  I'm not interested to recover the old data I backed everything up.  I have had no error messages on my sleeve it, memory, tests etc, so I'm at a loss on how to proceed.  Help, please!  Thank you.

  PS: I have the original 7 provided with the system recovery/windows DVD player.

  Hello

  Assuming that it's just a problem with the recovery media, here's another solution, you can try.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the Disk Image correct ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software offerings when you install ImgBurn) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  The source of the Windows Image is Digital River.

  Windows 7 Home Premium 64 bit SP1.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and software that you may need are entering either the No. fullModel. or your notebook product number here.

  Kind regards

  DP - K

• Satellite P300 PSPCCE: I want to delete or chang splash screen at startup

  I have laptop Satellite P300 PSPCCE and that you want to remove or change home screen starts to start the laptop.

  Is it possible to do? My Bios version is v3, 40

  Hello

  What you want to change?
  As far as I know, you can change the option of quick start or normal startup.
  Anything else is not possible.

  PS: this option should be available in the BIOS settings.

  Welcome them

• Reinstall Windows 7 Pro on new 2 TB HDD freezes on Windows startup screen

  My 160 GB hard drive crashed and I am trying to install Windows 7 Pro from the installation disc that came with my computer on my new hard drive 2 TB.  I read the posts that took even freeze on Windows startup screen and I disconnected all devices and devices except the mouse and keyboard.  I don't have 2 GB of memory simms, 8 GB installed, but has released simm all but one.  I tried to reinstall Windows 7 Professional several times and whenever it crosses the screen of facilities, then when the computer restarts it freezes at the Windows startup screen.  Help!

  Evelyn,

  (1) I have an idea which may simply not work. Install the software of Western Digital's Data LifeGuard Diagnostics.

  (2) then select / click on the Seagate 2 TB of disk.

  (3) then click on the little icon above the list of player who scored "click to run tests.

  (4) in the popup windows choose the option "write zeros". Click 'Start' and select the fastest two write options who writes zero for beginners / before the command and at the end / last sectors on the disk. It will take about 2 minutes or less. Once the zero finished writing your drive will be in a State of 'Raw' (just as if you removed from the box for the first time).

  (5) open "Disk management", you should see a windows asking you to 'Initialize' the reader. Choose the MBR (Master Boot Record "option.

  Now try to install Windows.

  J W Stuart: http://www.pagestart.com

• Satellite L405D-11V - freezes and the screen goes black when you watch the video

  OK, so I have the Toshiba Satellite L405D-11V, I had a breakdown, basically, the computer freezes at any time and the screen would go black, with the fan and lights still ongoing, this could be at the start, or a few hours using the laptop, so I decided to ring Toshiba technology support and they arranged for my laptop to collect and be expelled for repairs.

  I was able to track repairs online via the tracking service and was able to see what they were doing to my laptop, he said that they have ordered a part, it was underway and the repairs are completed.

  However, I got the laptop back today, I turn it on, all right, I start using the cell phone that everything is fine, so I decide to watch a video on youtube, and it freezes again, so I turned off now pressed the power button, hoping he wasn't that a large, I turn back to and load the video once again it freezes and the screen goes black again, after that whenever I am watching a video or a game, it causes the computer to crash and freeze as before the repairs. So there is always a mistake, but I'm not sure what to do

  Its still under warranty, I bought the laptop from the Comet, but I really don't want to send the laptop for repairs again and find it comes back with the same fault, is it interesting sending distributed, maybe see if the comet will replace the laptop as its still less than a year to buy the laptop, or it'll just be useful to save all the hassle and buy a new laptop? If this fault happened to someone else, I could use you some help, and if someone could shed some light regarding what could be bad?

  Thank you

  Hey Buddy,

  You changed something on the configuration after you got your notebook back from repair? You update a driver, or something else?
  What operating system you use on your L405D satellite?

  To be honest it is really hard to say why it happens because technicians test to check if your laptop is running correctly.

  In my opinion you should try to update the display driver. Maybe it's the origin of the problem of s
  If this isn't the case, I recommend installing Windows from Toshiba Recovery disk to restore to factory settings. These parameters are pre-tested by Toshiba and should work.

  If you still have the problem, you must contact the technicians again. I mean you could track the online repair and according to your assignment, everything worked well during repair, so in my opinion he should t be a problem to contact guys exactly.
  Explain your very detailed problem. I think that everything can be clarified then. :)

• G50-70 freeze at startup

  Hi, I have a G50 - 70 is only around the age of 2 months. Since then, he has had a problem with the immediate freezing at startup on the Lenovo screen where white swirling points stop. It happens about 1 in every 2 or 3 times it starts.

  I thought it would be Bios so I installed the 2 updates that have been released without effect. I tried to turn it off to quick start and the alternative boot - USB, LAN options.

  Any suggestions?

  Thank you

  Hi Rich5555,

  Have you tried to reinstall the driver and check the issue?

  Try to start the system in safe mode and restart the system and check the question, also perform system retore and check for the issue.

  I hope this helps. Do not post back if the problem persists.

  Best regards

  Ashwin. S

• S20 freezes on startup with installed PCIe card

  Today I made a new S20 (4105 - 94G) Win 7 x 64 BIOS: 60KT31AUS

  I installed the Quadro FX 580 without problem.

  When I tried to install a Firewire 800 PCIe 1.1 card x 1 system freezes during startup, with the ThinkStation screen with the Intel logo visible. No error message, no beeps. I waited for several minutes. This happens in all three PCIe free slots (x 1, x 4, x 16).

  The card in a Sunix FWB3414G (LSI chip).

  I would like to know 1) if any of you have this card work in an S20, 2) suggestions of what to try next.

  Thank you very much in advance for any help or advice.

  Pedro.

  
  

• My computer constantly freezes after startup

  Original title: System Hang

  My computer freezes after startup or during startup. Whenever I look at the problems and solutions in Control Panel, it says that my nvidia graphics driver has stopped working properly and should be updated but I checked and installed the latest version. What else could I try? I would appreciate the help as I have had this problem before and it stopped for a while and started again.

  Thanks-James

  Hello

  Yes, different drivers depending on the graphics card which is present in the system. I suggest to check the link below and download the drivers that are present in the link.

  Vista 32 bit

  http://www.nvidia.com/object/Win7-WinVista-32bit-266.58-WHQL-driver.html

  Vista 64-bit

  http://www.nvidia.com/object/Win7-WinVista-64bit-266.58-WHQL-driver.html

  After having tried the steps, let us know if the problem is solved or not.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• EliteBook 8540w randomly freezes at startup

  Hello

  Since I activated the encryption of the hard drive in HP ProtectTools and invalidate it later, I experience random freezes at startup of Windows 7 Professional 64 bit. The gel has also occur when booting from the Windows 7 DVD and a reinstallation of the operating system Windows 7 also has not fixed the problem.

  Help, please.

  Thanks in advance,

  Donenzone

  You might want to try a complete reformat of the hard drive and reinstall W7.  Ugly process, but then you will have a better palce to start with future debugging if necessary. However, before you do a reformat, try the following two procedures.

  Try this procedure:

  Disconnect the PC and open it. Clean all the dust. Carefully, remove and replace all the cables towards the mother board one at a time. Do the same for memory DIMM and the video and the sound of cards if you have a. Plug your PC give a TI a go.

  Here is another list of things to try:

  1. Download cookienator (it's a gift) and clean the House.
  2. Open my computer and right mouse click the hard drive--> properties--> disk cleanup
  3. Start Internet Exployer--> tools--> Option Internet--> delete browsing history
  4. Open my computer and right mouse click on the hard drive-->-->--> Defrag tools properties now
  5. Open my computer and right mouse click the hard drive--> properties--> tools--> Check now
  6. Open the RUN and enter the following commands:

  cmd

  sfc / scannow---> it will check your critical system files and try to fix

  output

  7. open the window RUN and enter the following command: chkdsk

  8 restart and see how things are going.

• This sucker is fast. How can I extend the time, the bios displays the initial startup screen?

  I sometimes want to fool around with the bios and other items in the first startup screen, but it does not display still long enough for me to recognize the function related to the options keys.

  How can I extend the time that is displayed?

  Please to identify your computer.

  Ook from Lto the base/back/side of the pc/laptop to the sticker with barcode.

  Item number of pole 2 as seen on the following example of label with barcode of a HP laptop. The barcode on your HP product may be slightly different in appearance, but will still have important information necessary for us to help you.

  #Don't post not the serial number, as it is personal information. ###
  
  Display the version of the operating system installed (and whether 32 or 64 bit) and if the CPU as a product AMD or Intel

  Not showing information as requested will delay our responses and troubleshooting slow the question that led you to create a thread.

  Normally the F10 is the key used to enter the BIOS of a PC HP. Begin to type the F10 key as soon as your press the power button

  Best regards

  ERICO

• How can I keep my youtube video / audio running while in the startup screen?

  I installed Window 8 the day of that release.

  I want to be able to play (keep running) a video from Youtube (not do stop playing) if I go to the start screen. This can also apply to other applications.

  I know already snap and run both applications at once on the screen (why only 2?)

  I want to be able to watch/listen to the vid when I go to the start screen.

  Thanks for the help

  Hello

   
  Thank you for using Windows 8. I've surely you will help find a solution on the issue.
   
  
  Some applications that are installed on your PC could not be pinned at the beginning. But you can still pin them if you want it. On the start screen, open the charm of the search, select the application you want to pin to open his orders and then press or click on PIN to start.
  To learn more about customizing the startup screen, refer to the article.
   
  Get to know Windows
  http://Windows.Microsoft.com/en-us/Windows-8/start-screen#1TC=T1
   
  Hope this information helps. Please reply back with the State so that we can better help you.

• Bridge instantly freezes at startup

  My suport IT has recently changed to a network drive for some of my favorites no longer exist. I just want to take them off because I think it will solve my problem, but as it freezes at startup has no way to change the preferences etc.

  Any help would be appreciated.

  Thank you

  Someone else who has this problem, it seemed to have fixed, even if the solution is not ideal.

  I removed the broken of the 'Favorites' registry file insde HKEY_CURRENT_USER\software\adobe\bridge links

  I hope this helps someone else who has this problem.