Qosimo F25 freezes on startup screen...?

Similar Questions

• Wanted: Hp envy freezes at startup screen win7

  had the phone for 1 week, was ok with windows 8 factory-installed running

  After successfully installing windows 7 on a usb key, it now freezes when "starting windows" animation

  freezes at the same point in the animation every time

  OK my friends I fixed it by chance... now this stupid laptop works

  I am entered bios and set usb3.0 support 'enabled' on 'auto '.

  He saw forced support somehow freezes windows 7 to start... on a new install after formatting the hard drive... after win8 worked perfectly well

  incredibly stupid bug

• installation of Windows 7 freezes on startup screen

  I am trying to install windows 7 pro 64 on a new Board from biostar itx a68n-5000. He gets in regard to starting windows with the colored balls and freezes.  BIOS sees readers, Ive tried affecting SATA AHCI, IDE, IDE's Legacy and no help. I also tried loading from a USB key which is bootable and still nothing, Ive built a few computers and have never had this problem. The Board of Directors is set to SATA 3 and I use 1 SATA disks, I thought everything was backward compatible.  Any help please

  installing windows 7 from windows with colored balls and freezes.

  0- Turm off your PC, delete all devices USB + mouse, unplug the cord, remove Bios battery, press and hold the button for 1 min while battery disconnected and the bios is out, release and sale battery and plug it. try to install again (do not connect any USB)

  0- update your BIOS

  or

  1- change the configuration of SATA in BIOS on 'compatible'.

  or

  2- disconnect any drive HARD or SSD, USB cables

  or

  3- Check your bios, if there is a Secure boot: ON, then turn off the POWER

  or

  4s ' there is "lunch CSM: in your bios, enable it."

  or

  5-disable the 'support of diskette drive' in the Bios.

  or

  6- turn on SATA AHCI in the Bios and enable the SATA Native mode.

  or

  7- use Rufusand install windows USB

  or

  8- get out your SATA, put it in another PC and install windows, then replace your first computer and install the drivers.

• EliteBook 8540w freezes at startup screen Windows after the installation of 2 x 4 GB

  Hello

  I have a laptop Elitebook 8540w. I wanted to upgrade to 2 x 4 GB 2x2gb RAM memory. I did buy a kit of 2 x 4 GB I wanted, instead, I bought two chips of memory from 4 GB of HP.

  After having replaced the modules of the notebook does not start.

  What has been done:

  -Restore default bios

  My first question is: I realize, it is best to purchase a kit of 2 matching tokens, but it's a must?

  Thanks in advance,

  2worlds.

  Hi 2worlds,.

  Your Elitebook 8540w is a commercial product and for your question more exposure, I would post in the trade forums. Here is a link to the forum Commercial Notebook.

  Thank you

• Laptop freezes on Windows startup screen (start)

  Freezes my laptop Envy15-3000 starting up.  It makes only to the Windows startup screen and then icons Microsoft stop moving.  This has happened since Tuesday (8/12).  I ran checks and the memory and hard drive (quick and full) test came back positive - i.e. without problems.  I finally decided to reformat yesterday (8/14).  He gets throughout the process of reformating until he wants to start the system for the "first time" (I guess this will be the last time it restarts in the recovery process) and always freezes on Windows startup screen.  If I try to hard cock off and try any other start up option I can think (Safe Mode, etc.), it says failed to retrieve and asks me to try again, get the details or Save Log.  When I try again, it goes back to freezing.  Therefore, I am now in an endless loop of another attempt of the retrieve to access the windows screen start freezing.

  All I want to do is wipe the hard drive and reload everything.  I'm not interested to recover the old data I backed everything up.  I have had no error messages on my sleeve it, memory, tests etc, so I'm at a loss on how to proceed.  Help, please!  Thank you.

  PS: I have the original 7 provided with the system recovery/windows DVD player.

  Hello

  Assuming that it's just a problem with the recovery media, here's another solution, you can try.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the Disk Image correct ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software offerings when you install ImgBurn) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  The source of the Windows Image is Digital River.

  Windows 7 Home Premium 64 bit SP1.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and software that you may need are entering either the No. fullModel. or your notebook product number here.

  Kind regards

  DP - K

• Reinstall Windows 7 Pro on new 2 TB HDD freezes on Windows startup screen

  My 160 GB hard drive crashed and I am trying to install Windows 7 Pro from the installation disc that came with my computer on my new hard drive 2 TB.  I read the posts that took even freeze on Windows startup screen and I disconnected all devices and devices except the mouse and keyboard.  I don't have 2 GB of memory simms, 8 GB installed, but has released simm all but one.  I tried to reinstall Windows 7 Professional several times and whenever it crosses the screen of facilities, then when the computer restarts it freezes at the Windows startup screen.  Help!

  Evelyn,

  (1) I have an idea which may simply not work. Install the software of Western Digital's Data LifeGuard Diagnostics.

  (2) then select / click on the Seagate 2 TB of disk.

  (3) then click on the little icon above the list of player who scored "click to run tests.

  (4) in the popup windows choose the option "write zeros". Click 'Start' and select the fastest two write options who writes zero for beginners / before the command and at the end / last sectors on the disk. It will take about 2 minutes or less. Once the zero finished writing your drive will be in a State of 'Raw' (just as if you removed from the box for the first time).

  (5) open "Disk management", you should see a windows asking you to 'Initialize' the reader. Choose the MBR (Master Boot Record "option.

  Now try to install Windows.

  J W Stuart: http://www.pagestart.com

• G50-70 freeze at startup

  Hi, I have a G50 - 70 is only around the age of 2 months. Since then, he has had a problem with the immediate freezing at startup on the Lenovo screen where white swirling points stop. It happens about 1 in every 2 or 3 times it starts.

  I thought it would be Bios so I installed the 2 updates that have been released without effect. I tried to turn it off to quick start and the alternative boot - USB, LAN options.

  Any suggestions?

  Thank you

  Hi Rich5555,

  Have you tried to reinstall the driver and check the issue?

  Try to start the system in safe mode and restart the system and check the question, also perform system retore and check for the issue.

  I hope this helps. Do not post back if the problem persists.

  Best regards

  Ashwin. S

• S20 freezes on startup with installed PCIe card

  Today I made a new S20 (4105 - 94G) Win 7 x 64 BIOS: 60KT31AUS

  I installed the Quadro FX 580 without problem.

  When I tried to install a Firewire 800 PCIe 1.1 card x 1 system freezes during startup, with the ThinkStation screen with the Intel logo visible. No error message, no beeps. I waited for several minutes. This happens in all three PCIe free slots (x 1, x 4, x 16).

  The card in a Sunix FWB3414G (LSI chip).

  I would like to know 1) if any of you have this card work in an S20, 2) suggestions of what to try next.

  Thank you very much in advance for any help or advice.

  Pedro.

  
  

• My iPhone freeze with grey screen, then restart only. Subsequently, the Wifi is not available, I have to finish manually restart.

  My iPhone freeze with grey screen, then restart only. Subsequently the Wifi is not available, I have to finish manually restart to be able to use the Wifi. I have restart my internet and network settings, but the problem is still there.

  Hi there Turco911,

  Looks like your screen goes gray and then shuts down its own, and you must manually restart to get the wifi to work again. I save your device in iTunes, then restore it like new and verify that it works.
  
  How to clear your iOS device and then set up as a new device or restore from backups

  If this is the case, restore your backup either check it still works and just reinstalled software or circumvent the problem in the backup file itself.

  If when restored like new the problem persists, I would ask for your phone service:

  Repair - iPhone Apple Support

  Thank you for using communities of Apple Support, all the best!

• Satellite L405D-11V - freezes and the screen goes black when you watch the video

  OK, so I have the Toshiba Satellite L405D-11V, I had a breakdown, basically, the computer freezes at any time and the screen would go black, with the fan and lights still ongoing, this could be at the start, or a few hours using the laptop, so I decided to ring Toshiba technology support and they arranged for my laptop to collect and be expelled for repairs.

  I was able to track repairs online via the tracking service and was able to see what they were doing to my laptop, he said that they have ordered a part, it was underway and the repairs are completed.

  However, I got the laptop back today, I turn it on, all right, I start using the cell phone that everything is fine, so I decide to watch a video on youtube, and it freezes again, so I turned off now pressed the power button, hoping he wasn't that a large, I turn back to and load the video once again it freezes and the screen goes black again, after that whenever I am watching a video or a game, it causes the computer to crash and freeze as before the repairs. So there is always a mistake, but I'm not sure what to do

  Its still under warranty, I bought the laptop from the Comet, but I really don't want to send the laptop for repairs again and find it comes back with the same fault, is it interesting sending distributed, maybe see if the comet will replace the laptop as its still less than a year to buy the laptop, or it'll just be useful to save all the hassle and buy a new laptop? If this fault happened to someone else, I could use you some help, and if someone could shed some light regarding what could be bad?

  Thank you

  Hey Buddy,

  You changed something on the configuration after you got your notebook back from repair? You update a driver, or something else?
  What operating system you use on your L405D satellite?

  To be honest it is really hard to say why it happens because technicians test to check if your laptop is running correctly.

  In my opinion you should try to update the display driver. Maybe it's the origin of the problem of s
  If this isn't the case, I recommend installing Windows from Toshiba Recovery disk to restore to factory settings. These parameters are pre-tested by Toshiba and should work.

  If you still have the problem, you must contact the technicians again. I mean you could track the online repair and according to your assignment, everything worked well during repair, so in my opinion he should t be a problem to contact guys exactly.
  Explain your very detailed problem. I think that everything can be clarified then. :)

• Satellite Pro 6000 freezes and the screen is weird random pattern

  Hello

  I recently bought a SP6000 second-hand advertised as having "graphics problems". After 10 minutes or use the laptop freezes and the screen has a strange random pattern all acorss it. The speakers are also a strange hum. I have to stop the laptop and restart.

  I've updated the bios and drivers for card video from the toshiba site, but he always does. Can anyone help?

  Hello

  It's not easy to say why this problem occurs. You have purchased a second hand unit. It is possible that your device has a hardware malfunction, but I can't give you an answer why it is happening. I suppose that temperature increases after 10 min of use.
  Maybe this could be a problem. It could also be a fault of the motherboard. But these are just suggestions. In my opinion, you should ask the service for detailed information.

• Qosmio G30 freezes at startup of Norton Internet Security 2008

  Norton Internet Security 2008 will freeze my computer because soon, it attempts to load and the only way to do is to restart the system by pressing the on/off key.

  My laptop is a Toshiba Qosmio G30-177 (model No. PQG32E-02G022GR) with Vista Ultimate and pre-installed NIS2007. I have no problem with this NIS2008 version on my other laptop (Qosmio F10 - PQF10E-02300JGR, WinXP MCE).
  NIS2007 works well on my G30 and I have no problems at all, but more recent versions of NIS seem to be in conflict with my system:

  1. I am able to install and run the new version, download all updates and adjusting the settings. Maybe, a couple days later my computer freezes after start in exactly when the NIS tray icon appears. For a few seconds there is simply no response of the system at all and the LED of my laptop show that any HD activity has ceased. After having been inactive during those seconds, the cooling fan will start to operate at maximum power, creating a huge noise that I never experienced before, not even while the CPU was operating at 100% for a while due to other programs. Force a reboot, that's all I can do.

  2. now, this time, I rebooted my laptop successfully even once (took a few attempts) and it all of a sudden not freeze. Then I disabled the firewall and auto-protect at all times, so there was no freezing at startup and I just had to enable both the firewall and auto-protect after start manually. In order to avoid the gel again after the reboot, I always disabled NIS before shutdown. For one or two days of workaround has been quite successful.

  3. all of a sudden, after one or two days, this work around will become useless, because the system begins to freeze again at the time of the icon is displayed. In this case, restart has no effect at all, and NIS will continue to freeze at startup. I also tried to prevent form from NIS to ccApp.exe run automatically at startup (administrative tools > system configuration > "Startup" tab). It's successful and my laptop is able to start normally, but if later I try to start NIS manually, it will freeze again.

  I had this problem since NIS2008 just came out, so I thought that at the same time an update Windows or Norton may have solved the problem, but this weekend I gave another NIS2008 trying without success. I'm pretty sure that the problem is not caused by other software than Windows or Norton, because I also tried to install NIS after a full system recovery, so I've only preinstalled NIS2007 and Vista on my laptop. I use Norton removal tool and follow the instructions to uninstall before attempting to install the new version of course.
  My last hope was that the version of NIS2009beta somehow would not freeze my system, but it does. It does not matter if I try to start 2008 or version 2009beta, the problem is exactly the same.

  What really motivates me almost crazy is the fact that NIS works perfectly for a while, then needs enough small workaround, and then after some time completely refuses to work. In these two days I do not change system settings, install or uninstall programs or doing whatever it is that I felt might conflict with NIS...
  So far, I have no idea of the solution and have again use NIS2007.

  Someone knows how to fix this?

  Hello

  To be honest I don t use the Norton internet security because it slows down the performance of the laptop and he needs too many resources.
  I used the NIS06 and after several months of use I removed it from my system for the reasons mentioned above.

  I put really know what might be a problem with your Norton Internet Security but I guess its associated software question maybe there are a few compatibility issues with vista and NIS08. Who knows...

  In my opinion, you should first check the Symantec Web site for more details.
  Maybe these questions are mentioned somewhere in the FAQ section and maybe some updates or patches are available.

  Good bye

• After upgrading the bios to version 2.13 t430u, it freezes at black screen

  Hi all

  After upgrading my lenovo T430u bios to version 2.13 it freezes at a black screen, and windows does not load. My machine has windows 7 Professional and the only way to make it work is to reset the bios settings, but after awhile, it freezes at black screen and windows 7 does not load again and need to reset the settings of the bios once more. Hope someone of you gyus can help me with this since is very frustrating.

  Lenovo has released a BIOS updated for ThinkPad T430u that resolves customer reports of black screen after upgrading the BIOS.

  CHANGES IN THIS VERSION

  Version 2.15

  [Problem resolves]

  -Fixed a problem with the black screen after BIOS update

  -Fixed a problem with the gray screen when turn off Bluetooth in the BIOS Setup

  V2.15 BIOS can be downloaded here: http://support.lenovo.com/us/en/downloads/ds031724

  Thank you

• Pavilion dv7t-3000 mobile: stuck on the startup screen, must repeatedly perform a hard reset to fix

  When starting after a successful boot & use, the PC is stuck on the startup screen that is black with the logo blue & white HP in the middle and "press ESC for the start menu" at the bottom left. I have to perform a hard reset to get a normal startup. Everything works fine. I stop the PC from the start menu. At the next startup the PC hangs at the HP splash screen. A hard reset solves the problem, but the problem occurred on & repeatedly.

  Problem was solved by uninstalling a number of HP programs! Unfortunately I have lost the paper on which I wrote exactly what programs I uninstalled. If you find this issue that may arise on your notrbook, try to uninstall the HP programs

• keeps freezing on the screen "Motorola dual core.

  I had my Xoom since it first came out and you think it is still one of the best tablets out there. Unfortunately lately I've noticed that when I go to power it on it will sometimes freeze on the screen "dual core". It is not every time, but more that I love. I wonder if anyone else is having the same problem and if so is there a solution? Thank you