Laptop DELL 1525 Insperon with DELL PHOTO 964

Similar Questions

• Laptop DELL Insperon 1525 and incompatible DELL Photo 964 printer?

  I have a laptop Dell INSPIRON 1525. I would like to connect my Dell 964 PHOTO to the laptop. I plugged etc. and been online trying to make 2 pieces of hardware to recognize each other. The message says "Dell 964 Photo has not all drivers" (I was hoping to download from the internet). Can someone tell me what to do to make this printer work with my existing laptop. I should mention that the printer is 6 years old and was purchased to connect to a Dell desktop at this time pc here). Any help appreciated

  It is difficult to give you specific advice because you do not have to tell us which version of Windows you are using. However, pilots and advice can be found here,

  http://en.community.Dell.com/support-forums/peripherals/f/3528/t/19306942.aspx

  on the Dell forums (credit to PudgyOne).

• Dell Photo 964 for W7 x 64 AIO printer driver

  Hello

  I am looking for a printer driver to use my printer Dell AIO 964 Photo under Windows7 ultimate x 64.

  Thank you very much in advance for your help.

  koalablue95

  PudgyOne,

  as already reported:

  I'm still looking for a working driver sound for my Dell AIO Photo 964 USB cable connected to a laptop of Lenovo T61 with:

  OS name Microsoft Windows 7 Ultimate (multilingual; language: English, United States)

  Version 6.1.7601 Service Pack 1 Build 7601

  Manufacturer OS Microsoft Corporation (real & registered)

  The LENOVO system manufacturer

  System model 6460A 44

  System Type x 64-based PC

  Processor Intel (r) Core (TM) 2 Duo processor T7500 2.20 GHz, 2201 Mhz, 2 Lossnay, 2 logical processors

  Originally, the laptop came with an OS 32-bit of Windows Vista under which the Dell AIO 964 Photo worked without any problems and I could use all it's features.

  After the update to W7 x 64 in 04/2012, all my devices and other drivers are working well except the Dell AIO 964 with compatible software Photo missing driver!

  Strictly following your recommendations of procedure installation to date, always the driver installation fails with:

  -"Device driver software was not properly installed" or with

  -' Dell Photo AIO Printer 964: ready to use '; and "964:No found Dell Photo AIO printer driver.

  I use the Windows Firewall and AVG2012.

  Driver installation failures also occur, when I turn off:

  n ' matter what internet connection

  -temporarily the firewall and/or

  -temporarily anti anti-virus AVG2012

  which means that the firewall protection software and the virus should have no impact on an installation driver successful or?

  I hope that these details could give you an "idea" for a procedure of working solution.

  Please let me a comment on this topic:

  "In the meantime, I must admit that I am a bit disappointed by the structure of DELL support"

  I'm looking forward to your reply.

  Kind regards

  koalablue95

• How to scan a document & send as an email? I have a dell photo 964 printer/scanner/fax

  I'm trying to scan a document into my hotmail & send, but I see no element which allows to attach the document or scanner. Surely, this can be done?

  Scan the document and save it in a folder. (My Documents would be perfect). Then attach the document. You can save the scan to PDF.

  Windows Live Solution Center Hotmail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=1

• Using Dell Photo All in One printer 924 with computer Inspiron laptop with Windows 7

  I can't get my Dell Photo All in One Printer 924, to work with my new laptop Inspiron with Windows 7.  I tried the divers and untilities to load the disc that came with the printer (which I have used before with a Dell PC) but the software is not complete loading and I get no explanation.  Go to the Dell site for pilots etc was no help.

  Dell is not win7 driver/software for this model, later are for 32-bit vista

• Dell Photo All in One 964 - 10-64 bit Windows compatibility

  Hello

  I just bought a new Dell laptop and updated to Windows 10.
  Unfortunally, my OS is unable to recognize the driver for my old printer Dell Photo All in One 964.
  I have read all the post on compatible with this specific printer driver. I tested the procedure:

  -remove the printer

  -install the driver Windows Vista - 32 bit or 64 bit and put Vista SP2 compatibility mode (also compatibility mode with Windows 7 and windows 8)

  -Connect the usb printer. But only the Scan is installed successfully.

  any help will be really nice!

  Thank you very much

  / Reg

  I installed the driver R146813 and it worked very well, for scanning and printing.

  Sure to first temporarily disable your anti-virus firewall before running the Setup.exe that comes with this driver. Complete the configuration all the way, including the print test page. Turn the firewall again later.

  The R146813 driver can be downloaded from www.dell.com/.../DriversDetails

• I have re-installed Windows Vista on my laptop (Dell Inspiron 1525) and now my wireless does not work.

  Hi, I have re-installed Windows Vista on my laptop (dell insparon) 1525 and now my wireless does not work. ive tried re installing driver, but it says operating system not supported. I used the disc that came with the computer of the re install and I even tried to install service pack 1. .

  original title: Wireless problems after install.

  I just tried both, the dell is one that says OS not supported"and the intel, it went very well, but my 'network controller' still have a yellow top thing in Device Manager. and I always wireless. any other ideas? Thank you for the help

  Question...  You have whatever it is listed in the "Network adapters" section of "Device Manager" now?

  While ensuring that the exclamation point is not for your wired network device (plausible) or bluetooth (plausible) and you just need to configure your wireless network to connect to * your * wireless network now.

  You may have to contact Dell to see why none of their drivers receive your wireless device works on the original operating system, what they included.  This could be a hardware problem PURE.

• Reference the Dell Photo all-in-One Printer 964 Installation

  I have a Dell Dimension E310 and a Dell Photo all-in-One Printer 964.  I am running Windows XP.

  My printer was working fine, but the scan did not work right.

  I uninstalled Dell 964 printer to help to change / remove programs.

  I tried to reinstall Dell 964 Printer by using the Drivers and Utilities CD: printer all-in-one Photo Dell 964 CD came with my computer.  I had this CD for 6 years and have used it to reinstall the printer before.

  I put the CD in D drive.  Sometimes, it will open the installation box (sometimes it isn't) where I can choose to install to a personal computer or a computer on the network.  I click on personal computer and wait.  Nothing happens.  In the past this action begins the process of installing the printer.

  Sometimes, I put the CD in D drive and nothing happens.  In this case, I opened my computer then right click on the D drive (which shows the Dell CD).  I click Open.  Sometimes, the installation box opens.  Sometimes it is not.

  Sometimes, a box opens indicating that the computer has detected new hardware - Dell Photo all-in-One Printer 964.  Operating instructions say if ensure that the Dell installation CD is in drive D, and then click Next.  He moves to another window where it says that it is looking for the CD.  Just, it maintains the search but can't find it.

  My CD of Installation is worn?  Is that why the computer can't find it?  Or something else going on?  Download the software of the printer from the Dell website?  Can I get a new CD Drivers and Utilities: Dell CD 964 Photo all-in-one printer?

  I have a limited knowledge of the computer.

  I appreciate any help anyone could offer.

  Thank you.

  Hi ColemanCreative,

  Please follow the instructions mentioned in the link below to uninstall and reinstall the drivers for your Dell Printer 964. Make sure there is no document in the queue before you uninstall the drivers.

  How do I uninstall the existing printer drivers: http://dell.to/18M5Oki

  If the problem persists, follow the steps mentioned below:

  Click the link for the Dell 964 printer drivers. Select operating system (OS) Vista. Once the operating system is selected as Vista, you will see an added option to run a cleaning/Patch Wizard to remove the old Dell printer software. Run the hotfix and restart the system. Make sure that the USB cable is not connected to the computer when uninstalling the printer drivers.

  For installation of printer drivers Dell 964:http://dell.to/13u7fzp

  When the system has restarted, check printing software has been removed and then install the drivers for the same link mentioned above. This time, select the operating system such as Windows XP, which is the operating system on your computer before you download and install the drivers.

  Hope this solves the problem for you. Let us know if additional assistance is needed.

  Thank you and best regards,
  Babita S
  #iworkforDell

  For easy access to the drivers, manuals and updates, please visit our Support Site .

• the dell photo printer 720 32-bit vista driver work with xp?

  the dell photo printer 720 32-bit vista driver work with xp?

  No, a Vista driver will not work with XP.

  Check the Dell support site to see if they have XP drivers for your printer.

  Reference Dell Driver Downloads:

  http://www.Dell.com/support/drivers

• I have a laptop Dell Latitude D830 that came pre-installed with Windows XP Professional edition. Now, I need to format the system.

  I have a laptop Dell Latitude D830 that came pre-installed with Windows XP Professional edition. Now, I need to format the system. Also, I had installed Norton Internet Security, but right now I have not any of the CDs. help, please.

  Also, will I lose Norton if I format the system? How do I keep it?
  original title: System format of...

  Hello JothinVedere

  After you have re-installed Windows XP, you can go on the site Web of Norton and download the software from their part. Once you have downloaded it you should be asked for an email or an account that you configured when you first bought Norton, log. After that, Norton is turned on with the rest of the time for your subscription should be displayed. If you have further questions about Norton, you can click on their link to support here. I hope this helps.

• Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.

  Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.  I tried all system tools and I get nothing and the only point of system restore in the restore SP1 update. not the best at the command line and even worse to system32 please help I need the laptop in return

  Hello

  1. when exactly you get this error message?

  2 are you able to boot into the office after getting this error on blue screen?

  3. don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps.

  Method 1: Try to start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: If the problem persists, then try to run the Startup Repair tool.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  Hope this information is useful.

• a yellow triangle with a critical problem message, windows vista does not load on a computer laptop dell studio

  Vista Windows failed to load on a dell studio laptop, the message appears with the critical error message, but then the screen turns white after auto restart, no loading of windows. What can I do

  http://support.Dell.com/support/eDOCS/systems/WS340/en/UG/DIAGS.htm

  Try the above balance sheet of Dell Diagnostics, using F12 to start this process.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can also follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• try to print from my Win7 x 64 laptop over the network (homegroup or workgroup) to an enslaved Dell Photo AIO Printer 926

  I'm trying to print from my Win7 x 64 laptop over the network (homegroup or workgroup) to an enslaved Dell Photo AIO Printer 926.  When I look for the computer on the laptop, I find, it seems to be fine, but when I print a job, the print job is in the queue on the laptop and does not send the job to the desktop printer.  I had it once before but a relocation removed.  I'm not sure why I see the desktop of my laptop printer but cannot get it working again.

  Any advice?  Thank you

  You need the Windows7 x 64 drivers for the printer (and perhaps software and fimware) installed on your laptop to be able to print using the printer on another computer if he uses another operating system...  Maybe when you reinstalled you forgot to install these things.  Try this and see if you can then print.

  If this does not help, please post in the Forums Windows7; http://social.answers.Microsoft.com/forums/en-us/category/Windows7 where Windows7 experts will be happy to help you.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• laptop (Dell Inspiron) with Windows 7 Home Premium is now slow to most of the activities - loading of the pages in the browser, etc.

  I heard that after a few years of use, Windows-based computers lose their ability to function. This happened to me before and I bought a new laptop. Now, I think that it happens again. The laptop (Dell Inspiron) with Windows 7 Home Premium is now slow to most of the activities - loading of the pages in the browser, etc... He is also declining my VPN connection occasionally, but also my direct connection is very slow. Latency shows speedtest software provided by the ISP in addition of 250 ms, download speed of 1 MB/s (compared with 8 planned) and 0.05Mbps download. The ISP has corrected this once, but I'm wondering now if it is the computer which is slow rather than on the network because my laptop works well on the same network/router. Is there one solution to this other than another new laptop?

  Jonathan,

  You say that your computer is slow, but all of the examples you give are rather than slow computer operations slow network communications.  To avoid any unnecessary work, check how fast the computer is on the tasks that don't use any network.

  If it works fine for tasks not network then you can concentrate on the problems of network as being the only concern.

  It has also become very slow for no network tasks you should study other causes.  Just as an example: If, like me, you sleep / turn off the computer when you are not using it then defrag will never work, so you can run it manually to make sure that doesn't cause problems.   Describe your symptoms in this thread so that someone can advise on the best course of action.

  In the unlikely case where you must run Dell Factory Image Restore, then the instructions are in your manual PC *.  Before doing this, run Dell Datasafe Local Backup then click on Backup, recovery to create - media allows you to create a bootable USB of the partition that you can use the normal procedure that failing Dell Factory Image Restore [to do this, even if you have already solved your problems so that you could face if the hard drive has failed never completely].

  * Procedure Dell Factory Image Restore [excerpt from the manual for Dell Inspiron 1545]

  1. turn on the computer.

  2 when the Dell logo appears, press several times to access the Advanced Boot Options window.

  Note: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop; then, shut down your computer and try again.

  3. Select repair your computer.  The System Recovery Options window appears.

  4. Select a keyboard layout and click Next.

  5. to access the recovery options, log in as a local user. To access the command prompt, type administrator in the user name field, and then click OK.

  6. click on Dell Factory Image Restore. The Dell Factory Image Restore welcome screen appears.

  Note: Depending on your configuration, you may need to select Dell, then Dell Factory Image Restore factory tools.

  7. click on next. Data delete screen is displayed.

  Note: If you do not wish to continue Factory Image Restore, click Cancel.

  8. check the box to confirm that you want to continue reformatting the hard drive and restoring the system software to the factory condition, then click Next.  The restore process begins and may take five or more minutes. A message appears when the operating system and the applications installed in the factory have been restored to the State of the plant.

  9. click Finish to restart the system.

• Can ' t find bluetooth device for online install on my computer laptop inspiron 1525 Dell. "

  can ' t find device bluetooth on line to install on my computer laptop inspiron 1525 Dell '.

  Original title: driver missing

  Go to the website of the manufacturer:

  Drivers from the manufacturer: Dell

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly