Warnings of power transceiver optics EEM

Similar Questions

• How to stop notification of power of the optical drive?

  How to stop the power of optical drive: on / off the startup in msconfig because I have no idea of what the process is called so so I can't stop it?

  Thank you

  Hey Buddy,

  To be honest, I don't know what you mean exactly.
  Can you post a screenshot or tell us what program you mean exactly?
  In addition, the exact model laptop with OS preinstalled number would be interesting.

  In general all start up programs, you can disable in msconfig. You can also see the program directory where it s installed.

• T430 optical drive power management?

  I remember when I first to get unity in its pre-installed state, I have to press on the eject button on the optical drive twice, first to turn it on and secondly to actually eject.

  But now I installed a new Windows 7 x 64. I downloaded the drivers and the power of the Lenovo site management software and installed. Much of the work of things, but doesn't seem that the optical drive is still on, i.e. only pressing the eject button ejects the disc.

  May I know if the power management actually manages the power of optical disc when it is not in use?

  Well, I discovered the cause, I did not install the AHCI driver. After installing, there is an option to automatically turn off the player.

• Optical Drive turns W530 offshore running Windows 8

  With Win8 on W530, the optical drive turns off shortly after start. Failed device management after that. Accessory optical drive and a UJ-260 do the same thing.

  BIOS 2.52 and 2.53: same problem. Main card has Intel RAID option ROM.

  Running Windows 7, the optical drive stays on without any problem.

  I would like to hear if there is a difficulty before you restore Windows 8. Win7 good for now.

  Try this: http://techdows.com/2011/09/windows-8-turns-off-power-to-optical-drive-when-there-is-no-media.html

• Need help for optical safety circuit.

  I buy these parts and prototype with real components, but since I multisim, I thought it would be nice to create the circuit and maybe work through issues I can practically.

  I need a circuit that takes 120 VCA, generates 5 VDC and 1.5Vdc power of optical transmitter and receiver.  I actually use a data port because he has great range and is pretty cheap.  Rather than send the binary code well I just send a light stead that is broken or not broken through doors and windows in my house.  Then the receiver sees this as an entry and order a relay.

  I tried several voltage regulators that come with multisim, but I get an error of execution of my circuit.  Really I can't the 120 VAC to power levels necessary for the functioning of the optics.

  Otherwise I might want to run on a system 120Vdc with battery backup, so throw a 120Vdc up to 20 v DC switching power supply - but I have not found a SMP in the library which takes 120 as input and as output 20.

  Basic plan: 120VAC source-> transform to 24Vac-> Full bridge rectifier to ~ 20 v DC-> voltage capacitor filter on the input of two voltage regulators (1 to 5 VDC, 1 to 1.5Vdc) - then circuit since the two power supply of the transmitter and the receiver.

  I just need help for 5V and 1.5V, from there, I know that the real world circuit will work component tests already carried out.  Thanks for reading.

  I didn't Multism so I can't advise you on the compatible models. I ran the model on semiconductors with slight modifications of format on my SPICE simulator based on Berkeley Spice 3f5. I had to change the format of model resistance semiconductors appeal but has not changed any values.

  The output of your power supply circuit 3 (with 5 V, not the 1.5 V regulator regulator) was 4.99995 V.

  There are a few messages about changing templates published for compatibility Multisim woth. You can search those to see if there are any suggestions on what you'll need to fix in the model.

  Lynn

• Windows 7 sees not SATA optical drives

  My engraver of CD/DVD Lite-On (model No.: iHAS324-98Y) managed to install Windows 7 Ultimate 64 bit on my new custom PC.  A few days later, I installed ASUS BR - ROM (model No.: BC-08B81ST) and the two discs have been palying OK.  A week later, I installed recorders Blu - Ray LG (model No.: WH10LS30) without a hitch.

  A few days after that, as soon as I opened up Explorer to move the internal HHD to an external HARD drive files, I couldn't see any which icon for optical drives.  I thought I had the virus but utilities Norton scanned no virus trouble.  Then, I searched the internet for a solution but nothing help. If I delete the Upperfilters and Lowerfilters of CD-ROM/DVD-ROM readers reg Key {4D36E965-E325-11CE-BFC1-08002BE10318} optical drive icons came back, but Windows 7 does not start (or crashes) after that unless the previous setting is restored.

  After a few hours cause analysis I went through the root, I think that the update of Windows 7 has contributed to this problem because I remember once again the PC installed upgrading during the power down, optical drive icons in the Panel of the computer is gone.  Has no known members the same problem?  Any Member draws the same conclusion?

  Note: I have to contact the manufacturer of Lite-On and they told me the drive isn't compatible Windows 7, but a guard thing listen why it worked in the first place because I used it to install Windows 7 on my PC.  My ASUS models and LG was working after I installed them even if they do not have the Windows 7 compatibility logo.

  What I did:

  (1) Re0installed Windows 7 Ultimate.

  (2) re-installed all the software application.

  (3) I have not installed any Windows updates.

  Since then, al of my optical drives are working properly.

• E531 dvd - rom (W7) power off

  Hello

  I have a problem with my Im dvd - rom. every time on battery, dvd - rom automatically turns itself off and I'm not able to restart, by clicking on "power on" has no effect, and there is no setting in the power manager that is linked to this. I tried to reinstall the microsoft dvd - rom drivers, I tried to PM and PM driver update, but it did not help. When I remove from Device Manager and reboot the system, then it's ok, but this solution lasts until the next boot. Any ideas?

  W7U running 64-bit

  Hello

  Probably, you might want to install an earlier version of the power manager and check. Community mod that agotthelf had confirmed in this thread version Power manager 3.59 works fine with power automatic optical drive option available.

  Best regards

  Mithun.

• How to troubleshoot and resolve the blue screen (STOP: 0x000000F4 (0xFFFFFA800BCF4B30, 0xFFFFFA800BCF4E10, 0 x 000000000000003, 0xFFFFF800031D4460)) questions for new construction

  I just finished a new construction, including Windows 7 Home Premium 64-bit.  Update all the drivers went through, and now I get BSOD.  Initially, I'd get them, after that the system wake up to 'sleep' mode, but this morning I received after you start the computer from the closure.  They are the mistakes STOP F4, and I'm sure that there is a way to fix them, I just need help on where to start.  After a few reboots to check the version of the BIOS and what not, the computer would no longer connect to the internet.
  Here is my configuration:
  CPU: Intel Core i3-3225 3.3 GHz Dual - Core Processor
  Motherboard: ASRock H77M Micro ATX LGA1155 motherboard
  Memory: G.Skill Ripjaws X Series 8 GB (2 x 4 GB) DDR3-1600 memory
  Storage: Intel 330 series 240GB 2.5 "Solid State Disk
  : Fractal Design Arc Mini Micro ATX mini-tower case
  Power supply: Rosewill Capstone 450W 80 PLUS Gold Certified ATX12V / EPS12V power supply
  Optical drive: Lite-On iHAS124-04 DVD/CD burner
  Operating system: Microsoft Windows 7 Home Premium SP1 (OEM) (64-bit)
  Other: 2 x Western Digital Caviar Blue 500 GB 3.5 "7200 RPM hard drive internal

  And here are two mistakes STOP I was able to capture up to now:
  STOP: 0X000000F4 (0XFFFFFA800B938B30, 0XFFFFFA800B938E10, 0 X 000000000000003, 0XFFFFF80002F80460)

  STOP: 0X000000F4 (0XFFFFFA800BCF4B30, 0XFFFFFA800BCF4E10, 0 X 000000000000003, 0XFFFFF800031D4460)

  This was my first computer build and I really enjoyed until the software part; simply too many current intangibles.  A lot to learn and I'm happy to do, but my wife would like a stable computer.

  Original title: how to troubleshoot and resolve problems blue screen for new construction

  Hello

  Bug_Check F4 is generally hard, cables, and associated hard drive controller.

  Since this is a new construction House remove ALL power - reinstall all memory cards and cables (on
  both ends where possible) - actually delete and replace - do not just tight. Make sure heat
  sink and compound are correctly placed and that all lovers of work.

  Check with the ASRock support, their documentation online, the diagnosis and ask in their forum
  for problems known.

  ASRock - Support
  http://www.ASRock.com/support/index.asp

  ASRock - Forums
  http://www.ASRock.com/support/forum.asp

  ASRock - downloads
  http://www.ASRock.com/support/download.asp

  =============

  See this article:

  You receive various Stop error messages in Windows 7 or in Windows Server 2008 R2 when
  you try to resume a computer that has a large hard drive SATA.
  http://support.Microsoft.com/kb/977178

  -----------------------------------------------------------------------------------------------------------

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ================================================================

  BCCode: F4 0x000000F4

  Check and reinstall the cards memory and cables (at both ends where possible) in fact
  delete and replace - do not just tight. On a laptop computer on all you can do is reinstall it
  memory and possibly check the connection/contacts on the hard drive. Memory could
  be the problem, so if you have more than 1 stick swap them in and out to see if the
  problem follows a stick or try the new memory. Antivirus/anti-spyware/security programs
  have been known to cause or have a role in this matter.

  More general patch updates day and low level chipset BIOS drivers and other control
  software.

  Also check the wiring on the hard drive.

  =========================================================

  Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION

  CRITICAL_OBJECT_TERMINATION bug control has a value of 0x000000F4. This indicates that a process or thread crucial to system operation has unexpectedly is released or ended.

  Important info if you received a STOP Code
  

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  CRITICAL_OBJECT_TERMINATION parameters

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The Terminal object type: 0x3: Process of 0x6: Thread
  2	The endpoint object
  3	The name of the process image file
  4	Pointer to a string ASCII containing an explanatory message

  Cause

  Several processes and threads are necessary to the functioning of the system. As they are completed for some reason, the system can no longer function.

  BCCode: F4 0x000000F4<-- read="" this="">
  * 1241.html http://www.faultwire.com/solutions-fatal_error/A-process-or-thread-crucial-to-System-Operation-has-0x000000F4-

  ==================================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant
  (also, Windows 7 and Windows 8).
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen
  of death "crashes and displays the information about all crashes in one
  Table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista (also Windows 7) Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Can I use Dell original product key to activate a clean Windows installation after I have replace/upgrade motherboard, processor and other key components?

  I have a Dell computer, with Windows 7 Home Premium 64-bit installed in the factory. There is a product code for windows on the sticker on the box. My problem is that the motherboard and CPU are released. I intend to replace and update the motherboard failed and cpu, ram, power supply, optical drive and eventually put in a larger hard drive. From what I read, I can not simply start the machine with the original hard drive, with windows already installed and activated. So if I wipe the hard drive (or put it in a new), can I clean install Windows 7 and then just use the product key on the sticker on the box to activate the new installation? Or what I need to buy a new copy of Windows 7?

  I've also read on other threads, that you can "transfer" a license of Windows 7 on a different machine only if it is a "commercial" version, not OEM. If the version of Windows that is preinstalled on a Dell computer would be "retail" or "OEM"? And to reactivate the software on a rebuilt/updated machine up-to-date with the new motherboard, etc. would constitute a 'transfer to a new machine' or reactivation just on a computer upgraded?

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :

  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

• Receive optical power warning - above threshold

  As we know,

  We cannot set up the optical transmit power of the SFP. However, we can check the power level of reception received by the peer through the command:

  View details transceiver interface

  However, newspapers have been showing:

  20 August 06:45:14.434: % SFF8472-5-THRESHOLD_VIOLATION: item in gi1/0/25: high power warning Rx; Running value:-1.7 dBm, threshold value:-3,0 dBm.

  Check:

  Optical alarm warn high low warn low alarm
  Receive the power threshold threshold threshold threshold
  Port (dBm) (dBm) (dBm) (dBm) (dBm)
  -------    -----------------  ----------  ---------  ---------  ---------
  Gi1/0/25-1 article, 7 + 1.0 - 3, 0 - 19.0 - 23.0

  This will have a big impact on my switch? In particular the SFP

  Factors such as damage, etc.

  In addition, how will this affect the performance network, health and functioning of my devices

  Your ideas are much appreciated (and if you can back it up with docs, it would be useful also! ^_^)

  It seems that your remote line is the sending of a relatively high output power and/or you have a connection very short fiber with very little loss. Since you are only at the beach 'warning', you are not likely to damage any of the SFP receiver or adversely affect the operation of the network.  You don't have the possibility to add an Optical Attenuator on the link to make the action more within the specification range.

• How to disable the icon "power optical drive?

  Hello world
  Anyone know how to disable the taskbar icon "player optical power" or how to disable the service? I don't find in Services, msconfig, not even in parts 3 publishers register Jv16 PowerTools as Cc Cleaner...

  Thank you very much
  Walter

  Hello

  I have the same icon, you can right click on this icon and choose:
  Disable automatic locking optical drive->

  But I don t think it will disappear the taskbar icon.

• Satellite A660 - player optical power: OFF

  I have an A660 and I'm doing a system repair disc, but the message "Windows has not found that a CD/DVD burner rises. I also noticed that the icon on the right side of the taskbar indicates that the "Optical Drive Power: OFF '.

  I am running Windows 7. I think it may be a setting outside the energy saving eco utility.
  Someone please offer little help on this it would be much appreciated.

  Thank you.

  Hello

  By pressing FN + TAB turns the power of the STRANGE power or eject disc tray... Try this...
  If this does not work, check the Toshiba ODD utility

  All programs-> Toshiba-> CD & Applications DVD

  Welcome them

• Feature "Automatically turn off the optical drive" deleted in Power Manager 6.61 Update?

  Hello Lenovo Community!

  I'm running a Lenovo W510 4391-A72 Windows 7 Professional (x 86) SP1.

  Recently, (thanks to sclexman for helping me) after the installation of System Update 5.05 and update all my Lenovo software, including Power Manager (6.65.2-> 6.66.1), the ability to 'Automatically power down from optical drive' is no longer available! Is there an explanation as to why this feature was removed?

  If so, is it possible to restore this functionality?

  Thank you

  it_geek.

  Shortly after that I posted about I tried to redo the system update. Wa - la, when you mentioned something about Intel AHCI rapid storage driver I checked to see that when the system update ran the last time he uninstalled the old version but somehow, it didn't update the new version in. System update has since installed version 12.8.10.1005, and the option appears according to normal on Power Manager 6.66.1.

• Missing optical drives after removal and reinstallation of the only power cables.

  I had a problem with my cd - rw (plextor px-5224ta) and dvd - rom not opening not readers.  I opened my case and only disconnected the power cables, leaving cables ribbons connected, so that I can drag players a bit and work with trays to correct.  Once this was accomplished, I reinstalled the screw on their trays and reconnected power cables.  I start and the discs are recognized only in the Setup, nothing in the Manager device or workstation tab 'manage '.  Once XP starts they disappear completely, no yellow exclamation point, no code error 39, etc just disappeared.  I searched through endless forums and this site and tried everything that has been mentioned previously (double check all physical connections, remove case filters in the registry, the thing FixIt from Microsoft).  When none of that worked, I figured that the discs themselves were dead, even if they would be open, close and turn.  I cannibalized another pc with a cd - rw to hitachi and who threw in there without change.  I booted from the cd - rw with no problems, but windows is not yet anything optical displays on my system.  The cd - rw and dvd - rom are configured as IDE primary master and slave, respectively, although I've tried in the secondary without success.  It seems to me that I have completely a software problem.  I think I'm pretty computer savvy but I am down to a reinstall of XP MCE and I wanted to check with the experts, if I had missed something before.  And if it doesn't I'll throw him off the roof :-)

  Thanks in advance,

  Kris

  Spec:
  Asus A8N - SLI MOBO premium
  AMD 3800 + 939 proc
  2 GB of RAM
  2 x XFX 8600gts XXX SLI would be
  250 GB Western Digital HD

  Hello Kcm308lr,

  Thank you for your message.  Your troubleshooting steps are healthy, the only thing that I would recommend before you resort to the "roof" or "Reinstall" would update the firmware or drivers.  You should be able to find this on the part of the manufacturer of your computer or the website of the manufacturer of the CD - RW.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• My Microsoft Wireless Optical Mouse does not communicate with the Transceiver.

  After the return from a road trip, I plugged my Miccrosoft wireless optical mouse and keyboard. At first, communicate with my Toshiba Satellite laptop, but the keyboard now works. The mouse works sporadically if I push the reset button on the Transceiver and he travels the three lights. When I check the State of the mouse, it shows good batteries (I replaced the still) and the right signal. The computer apparently see the mouse, but somehow the orders do not get through the ARVA. Any ideas?

  Hi Peter,.

  What is the model number of the Microsoft Wireless Optical mouse?

  I suggest you try to connect the transceiver to another port. Then check the behavior of the device. By trying the receiver on a different port, you can eliminate all the problems affecting the port itself.

  You can access the links below and follow the steps described in section troubleshooting problem mouse Microsoft Wireless on your computer and check to see if it helps you solve the problem.

  http://support.Microsoft.com/kb/838398

  http://support.Microsoft.com/kb/321122/en-us

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.