E531 dvd - rom (W7) power off

Similar Questions

• Satellite R630 DVD drive is power off and cannot turn on again

  For the first time, I tried to use DVD drive to install software. However, I found that his power was turned off. I checked the manual, which suggests that the FN + TAB key to turn on. But nothing happened after that I indexed both keys. I don't know what to do now. Thanks for your suggestions!

  Hello

  It s really strange that FN + TAB combination of keys doesn t work I often use this key combination to power on/off of the DVD player and it has always worked

  In any case, have you checked if the CD/DVD drive is listed in Device Manager correctly?

  Usually, if some keys FN n t work you must reinstall Flash Cards Support utility and added value package. These two tools can be downloaded from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com/ > support & downloads > download drivers

  I hope that it helps :)

• Adding second DVD - Rom SATA HP Pavilion with only 2 SATA power connectors.

  Try to add a second SATA DVD Rom but do not see more SATA power connectors?  I tried to discuss with Tech, desperate!  Don't understand.  The system came with a SATA hard drive and a SATA DVD/BlueRay so both SATA power connectors are used.  I do not see another SATA power connector in the system, but there are at least 2 connectors SATA DATA more on the system board.  You can even add the old style DVD of as the connectors on the system board do not exsist for the old style DVD ROM.  What they do a converter to SATA power adapter or am I missing something?  Strange.

  If there is not a spare SATA power connection, maybe sometjhing like this would help:

  http://www.satacables.com/HTML/Molex-to-SATA-power-15-pin-ADA.html

• Windows Media Center cannot detect the error DVD Windows Media Center cannot detect a DVD in the DVD - ROM drive. Insert a video DVD into the drive

  Original title: why Windows Media Center does not detect my DVD?

  I built my computer motherboard ASUS P658D, Intel i7 processor clocked at 2.6 gHz, 12 GB RAM, 750W Corsair PWR. power, Windows 7 Home Premium 64 - bit & ie9. When I put or the other two DVDs in one of two DVD players, Windows Media Center appears and when I click on "Play DVD" Media Center give me a window that says:

  "Windows Media Center cannot detect a DVD in the DVD - ROM drive. Insert a video DVD in the drive." Two DVDs, I've tried are educational for DVD

  my Nikon D300 Digital camera and a family video DVD or both these very well play in a bed of same computer running Windows 7 Professional 64-bit, & ie8.

  I tried Microsoft Fixit, no help. I tried to send Microsoft Support, and I got NO HELP. I did not bring any changes, and installed any program, just

  scoured the internet. A DVD player is a Sony Optarc with Microsoft Driver, the other is ASUS. I also tried to use Windows Media Player but nothing

  rises or it returns me to Windows Media Center and it does not detect to play either of my DVD. How can I get help here, or from Microsoft? Thank you.

  No, there is no yellow warning in Device Manager and the device manager says that two DVD players work properly. Mr. Fix it's

  automated download from microsoft that is supposed to automatically fix some problems, but he provided no help here. I think it is more likely

  that there is a problem with Windows Media Center or Windows 7 Pro 64 bit and either of my two new Sony DVD drives

  and ASUS.

  I thought my way in a solution. My thought was: Device Manager indicates DVD players work properly and both are new and we're Sony, and the other ASUS so I think only an unlikely problem with readers. The problem is with Windows Media Center "do DETECTED is not the DVD. So there must be a problem with Windows Media Center. I thought that I might need to reinstall Windows 7... then I thought that maybe if I just reinstall Windows Media that will work. He did. My problem was:

  Start > Panel > programs and features > features on or off Windows activate > then uncheck the box for multimedia functions > restart the computer > and then re-check the box to restore the multimedia features > now both discs play both DVDs, I tried. Both disks are operating normally. Reinstall the characteristics of media Windows 7 resolved the problem. Thanks to all who offered solutions.

• Satellite A660 - player optical power: OFF

  I have an A660 and I'm doing a system repair disc, but the message "Windows has not found that a CD/DVD burner rises. I also noticed that the icon on the right side of the taskbar indicates that the "Optical Drive Power: OFF '.

  I am running Windows 7. I think it may be a setting outside the energy saving eco utility.
  Someone please offer little help on this it would be much appreciated.

  Thank you.

  Hello

  By pressing FN + TAB turns the power of the STRANGE power or eject disc tray... Try this...
  If this does not work, check the Toshiba ODD utility

  All programs-> Toshiba-> CD & Applications DVD

  Welcome them

• Satellite A200 - 23P - mechanic of DVD - rom does not

  I'm sorry for my English in advance this topic! -Thank you

  I have a very big problem with my engraver of DVD (RM).
  I bought SAT A200 - 23P three weeks ago.
  The Win VISTA operating system has been installed. DVD - rom worked well.

  If I have installed Win XP to the second partition on my HARD drive (to install the disk with driver for sata drive in nlite) and installed all the drivers and utilities for Toshiba laptop, I found that my DVD-rom is not working while I press eject button.

  Mechanic of DVD is not responding to eject in XP and not even in the BIOS!
  It is interesting, mechanic DVD is the detection in BIOS, detects in XP, XP operating system votes - mechanic to the DVD works properly - its fable.

  However, if I have installed XP on the second partition, Win Vista does not load :(
  I don't have a second chance for second selection (Vista and XP).
  I now have XP only, even if Vista is on the first partition - I didn't delete it.

  Do you think that the DVD-rom is HW or SW problem?
  I think that, given that the DVD-rom does not in the BIOS - HW error.

  But is very strange, if I install XP from mechanic to the DVD and then close is, DVD - rom does not...:)

  If I manually open and insert the CD, the DVD does not (diode led no blink, just if I turn off the computer, led blinked once).

  PLS help me someone-

  Thank you!

  Hi Michal

  Your question is very strange, I mean the number of CD/DVD drive

  The fact is that the readers of CD/DVD eject function functions should any operating system has been installed on your laptop. It has nothing to do with your software on the HARD drive.

  So I wonder why the eject button works with Vista and not XP preinstalled OS?  :|

  My only plausible explanation is that sometimes there is a bad connection between the laptop and the drive. However the problem could be related to the hardware problem too

  As you see it s not easy to say what's wrong exactly, we can only speculate.

  Now some details about your installation of OS double.

  You cannot choose between Windows XP and Vista because Vista boot manager was obliterated during the installation of Win XP.
  This happened to me also. I installed Win XP on my Satellite and could not start Vista.

  The solution was simple; I used another original DVD of Vista (from my friend) and booted from this DVD. Vista has renewed the Boot Manager, and then I was able to boot Vista.

  Then I downloaded the tool called Easy BCD.
  This tool can change the Vista Boot Manager settings. I've edited and inserted a new Windwos XP OS entry.

  That s it!

• Special Edition of star wars HP: Dvd rom starting up/reboot

  Hi everyone I recently bought the laptop HP star wars Special Edition and I just noticed each time I restart the laptop the dvd rom will make a noise happens also after it starts. Is this normal?

  @AntiMatter

  Forums can be with you

  I understand that DVD drive of the laptop makes a noise whenever you have be turn on or off.

  I need some clarification on a specific solution:

  What is excessive noise?

  When was the last time that you did not have this problem?

  Did you install updated BIOS, lately?

  Have you have performed the steps on your own before posting on the Forums of HP?

  If you are unable to reach a resolution, please click on accept the Solution to help others with similar issues.
  If you like my assistance, please click on the thumbs up icon.
  The two icons are below this post.
   
  Have a good day Ahead.

• Reader of CD-R/DVD-ROM (IDE) of K LITE-ON COMBO SOHC 4836 opens not (mechanical)

  I can't use the original CD-R/DVD-ROM drive, because he that is no longer open tray drawer. It's a mechanical problem, I've tried several times unsuccessfully to fixation. It's my only optical drive, and I can't find an IDE drive to replace, because everything I've found so far is SATA not IDE ATA.

  My computer recognizes the drive, but this isn't a software problem, so it can't be fixed with troubleshooting app.

  I went to NewEgg and an engraver of CD/DVD ASUS DRW-241st/BLK/DOWN black SATA 24 X bought last week. It happened a few days ago, and I tried to install it, but he found the new driver has no receiver necessary required power (a cable IDE socket receiver) plug at the rear of the unit. I had to request a RMA from NewEgg number for refund.

  What should I do? I need a CD/DVD drive of work!

  My PC is a 2006 Compaq Presario desktop SR 1930 t CTO, with Windows XP (home edition) operating system.

  Last year I replaced the original with a 480W 300W PSU (has supposedly 'support SATA', but I don't know what that means). I know there is only a single receiver plug on the ASUS drive, and several card receivers on my drive LITE-ON.

  Help, please!

  My bad.  I didn't notice that I've linked drive was just a ROM.

  This small converter looks interesting.  I had not seen this before.  It should work OK if you have peripheral space being tacked on to the back of the drive.  Well done.

• Pavilion p6744y: HP Pavilion p6744y DVD-ROM does not not after installing Windows 10.

  I have recently installed Windows 10 on my Pavilion p6744y. Since installation, the DVD-ROM does not work correctly. This worked perfectly before the upgrade of the OS and is the original drive installed by the manufacturer.

  Spin discs and the light flashes, but there is no response from the computer. DVD - ROM does not appear in Device Manager and has been confirmed as "ENABLED" in the BIOS Setup screen. All wires and cables are attached and tight.

  The HP Support Assistant is installed and confirms that all the drivers and software are up-to-date, like Windows Update.

  Microsoft contacted for support and remote access to the PC. They have attempted to install an updated driver, but have been unable to find newer and easier to apply than the drivers already installed drivers. They were unable to solve the problem and advised me to contact HP. Contact HP is not useful because the PC is out of warranty and they expect me to pay for the support.

  Help, please. I suspect all that I need is a updated driver to make the DVD - ROM communicable with 10 visible Windows.

  I know a little about this stuff, but I'm certainly not a computer "guru". Please keep the simple resposnes with easy to understand by a layman terms.

  Thanks for your help!

  I FOUND A SOLUTION!

  Research in the blogs of support paid off in a big way. A minor registry editing is all it took, and my player works like new!

  Here is the solution. My system is Windows 64-bit 10.

  Resolution 5: Create a registry subkey
  Note to use this method, you must be logged on to Windows as an administrator. If you need help, check that you are an administrator, go tohttp://support.microsoft.com/gp/admin
  Important follow the steps described in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you edit, back up the registry to restore in case of problems.
  To create the registry subkey, follow these steps:
  Press the Windows logo key + R to open the run. (or right click on the windows down icon to the left)
  Type regedit in the run box, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click on allow
  In the navigation pane, locate the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\atapi
  Right-click atapi, point to new, and then click key.
  Type Controller0 and press ENTER.
  Right-click Controller0, point to new, and then click DWORD(32-bit) value.
  Type EnumDevice1 and press ENTER.
  Right-click EnumDevice1, click on change...
  Type 1 in the value data box, and then click OK.
  Exit Registry Editor.

• DVD rom keep making noise

  Two weeks ago, I bought a HP 2235tx g6. From the beginning, I just think it's normal that dvd rom keep making noise every 5-10 minutes (eventhough its empty). But now, I think that it is not normal. Is there a solution for this problem?

  Budi_hi,

  Your system does not have health monitor. He has Assistant support that does the same thing, but it mainly installs just the updates.

  Turn off the computer.
  That you put it on press the F10 key. This will load the BIOS setup utility.
  Press F9 to load the default values.
  Press F10 to save and exit.

  When the computer starts up, check if everything is working.

  You should also try updating windows.

  Here is a link that will guide you through the steps.

  It may be a hardware problem with the drive because it's happened since you've got the computer.

  You will have to perhaps call HP and see what options it must repair or replace the disk.

  Here is a link to a phone number to call HP.

  I would like to know how everything goes

  Nice day.

• Vista Home Premiun Device Manager does not display my CD-ROM/DVD-ROM drive

  I recently tried to use my CD-ROM/DVD-ROM drive and it did not work. It was working fine a few days previously but now... Nothing.

  My first reaction was to open Windows Explorer, expand and look at computer. There was my C drive and the recovery Partition but no Opitical drive more.
  Then I opened the Device Manager and saw that the CD was registered it is more as well?

  My question is

  Vista automatically removes the CD-ROM drive in the list of Device Manager if there is a problem with the drive itself?

  Or is there something that happened this suppression the CD-ROM in Device Manager list and it is not a problem with the drive itself?

  I had a disc go bad before on a PC running Windows 98 and 2000, but the disc stayed in the Manager list but I'm pretty new to Vista and know things are very different. So before we get in panic Mode, I thought that it would be a good idea to ask where someone will know probably for sure.

  Thanks in advance for clues

  Len

  Hello

  1st try a restore of the system if you have a point of return before it happened.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -----------------------------------

  If no joy:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• How can DVD - rom disabled computer says it has a code 22, I get the dvd - rom to work

  My toshiba laptop, I cannot activate dvd - rom. He says I have a 22. code can you tell me how to activate the dvd - rom. thank you...

  Hello

  Check with Toshiba Support, their drivers and documentation online and ask questions in the forums on
  known problems.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  =================================================================

  This problem may be caused by the presence of too many CD/DVD programs competing for resources,
  especially by these programs that run at startup.

  Code 22
  http://TechNet.Microsoft.com/en-us/library/cc731267 (v = ws.10) .aspx

  How to fix the Code 22 errors
  http://pcsupport.about.com/od/errorc/a/code-22-error.htm

  How to enable a device in Device Manager in Windows Vista
  http://pcsupport.about.com/od/windowsvista/HT/enabledevvista.htm

  If necessary:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Cannot find my dvd - rom on laptop drive.

  I have windows vista on my laptop and I have a dvd - rom drive that used to work, now, he's not even appear on the computer.  How can I reinstall the drive?

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Reader of CD-ROM/DVD-Rom disappeared after the installation of Service Pack 2

  Why my CD-ROM/dvd-rom drive does not disappear after the installation of Service Pack 2 and how do I get it back? Because before I installed Service Pack 2 I had a problem of code 10 and tried deleting the thing fixing upperfilter, but that did not work, so is there anything else I can do. I have a HP Pavilion dv9000 and it is 3 years old.

  Thank you!

  Hello

  Check with HP, their drivers support and documentation online and ask in the HP Forums about known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• CD-ROM/DVD-ROM not working-Code 39

  Inserted a disk and found that my CD-ROM/DVD-ROM is not working. For Device Manager and got this message:

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  The device is Optiarc DVD RW AD-7560 s

  With the help of Windows Vista, ACER Aspire 6930

  Tried to find solutions, but nothing happened... need suggestions on how to solve this problem.

  Thank you

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the total process
  which solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, and then make sure that the cables
  at both ends. Remove and replace, do not just tight. For laptops, you can clean it often
  power and contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD.
  Or even if there are the 'old', you can reinstall. Many use the default Windows drivers
  However, some will be more special. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.