Warranty start date shows two and a half months too early

Similar Questions

• My control panel shows only one user, but when I start it shows two users on the logon screen. and I know no other password

  My control panel shows only one user, but when I start it shows two users on the logon screen. My user is an administrator. But I do not know password of another user. I am currently using as an administrator. But I also want other user password. Answer please

  Your machine has only two accounts: admin and guest. I saw a few messages before which the poster makes an additional account on the log on screen that does not exist. Since there is not, it cannot be used.

  Also note that you play a game at high risk, having only one administrator account. This forum deals daily with posters including one and only the admin account went bad for one reason or other. Something about it now while you can: create, test, and document a spare, even admin account that you have a spare emergency House key.

• Pavilion 15 p158sa: Incorrect warranty start date

  Like so many others on this forum, my new laptop HP Pavilion has bad warranty start date.

  The laptop was purchased only on 11 January 2015. However, the warranty start date is 11/10/2014.

  Of course, I'd like it corrected.

  Until someone asks. Yes I can prove it.

  Thanks in advance

  James

  Hi @Jtsnr ,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).

  If you are unfamiliar with the operation of the function of the Forum, private messages you can learn it all here.

  Kind regards
  George

• start date for each week of the month

  Dear members
  
  How can I find double, the start date of each week of the month in a year.
  beginning of the week is the word "Monday".
  
  
  year month week day date
  ----------------------------------------------------------------------------------------
  Monday, January 3, 2011 JAN 1, 2011
  2011 2 JAN Monday, January 10, 2011
  Monday, January 17, 2011 January 3, 2011
  JAN 4 2011 on Monday, January 24, 2011
  2011 to January 5 Monday, January 31, 2011
  
  
  Thank you
  
  teefu

  Hello

  You can use this:

  with t as  (select to_date ('01/01/2011', 'DD/MM/YYYY') start_date from dual)
  select  date_calc
  from (
          select  start_date,
                  (level-1)*7+trunc (start_date , 'D')+1   as date_calc
          from t
          connect by level <=53)
  where trunc(date_calc,'YYYY')=trunc(start_date,'YYYY') ;
  

  Kind regards
  Sylvie

• I have a Mac Book (2006), all my emails since two and a half years have the same date. How to bring back the original dates?

  Of 'date and time' I tried to drag the month and year of my menu bar. He did not stay, I did several times, but nothing helped. I closed the window and went back to my Thunderbird email to see the date, I tried to use became the date in the column "date of receipt" of all of my emails back for 2011. I changed the date a few days later, and then the date is changed on all my emails. I want to cancel everything I done the dates so that the emails show when they were initially received. I managed to get "the order received" which helps a little, but I don't see the original dates.

  I checked "set date and time automatically", but it does not change the dates on my saved emails.

  Of 'date and time' I tried to drag the month and year of my menu bar.

  Is this something Mac?

• starting again... after two and a half.

  Ok. I took a class in Actionscript 3 starter... but I did so much more multimedia

  I don't know anything.

  A question - for now... maybe three more to get me on my feet again?

  I want to load a GIF, jpeg from a url to a "place arbitrary / Blackbox" where he would go on the stage.

  How would I do that please?

  Here is a tutorial

  http://Manfred.Dschini.org/2007/06/12/AS3-loading-external-images/

• Warranty start date

  Best buy sell a laptop, three months after its release. Client laptop boots on the purchase date and to find three months of the year a standard guarantee is already past. I suggest that this violates fair trade standards, as all the machines sold in retail stores are recommended as with a guarantee of 12 months. I'm also surprised that this guarantee does not allow the customer to call or email technical support, leaving them the choice if it sucks and see, take it to Best Buy and pay a "geek" of $150 to suck their teeth and say "he should be returned to the manufacturer" or post on the forum.

  Warranty begins from date to date to the notebook is purchased by the final user in box not sealed this date, the retail store ordered the laptop.

  Limited in effect translates into no guarantee at all.

  I've used Dells since 1995, I'm shocked that this company starts more guaranteed from the date of purchase (i.e. first start)

  Hi Richie,

  My apologies for an unpleasant experience. If the system is purchased from the dealer, the limited warranty on Dell hardware would be active from the date of purchase of the computer. If you are in the United States, the system comes with an a (default) year limited material warranty.

  You can private message me the following information by private message (click on my user name and then click on start Conversation):

  1. Serial number of the computer
  2. Date of purchase
  3. Country of purchase
  4. Full address, city, State and zip code
  5. Phone number and telephone number of substitution.

  Once I have the details, I would be able to decide the next course of action.

  @ DFO: thank you for the assistance to the customer.

• K8T82PA #ACJ: bad warranty Start Date

  my billing date is 07/01/2015 but HP support assistant, it is watch 12/26/2014. I need help.

  Hello:

  Call HP for the country lives, and they will send you a Web link or by e-mail to download you or attach a copy of your invoice/receipt showing the date of purchase.

  Then they will be adjusted accordingly to the guarantee period.

  I had to do the same thing and it took about 3 days for them correct the warranty period.

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

• Run the command in Start menu show sites and other files that I opened.

  I was typing letters in the menu run from the start menu ("Start" > "run" > "a, b, c, d, e, f, g, etc...) and I noticed that the Web sites I visited were stored there. This information is accessible by hackers or other intruders unwanted? I was checking to see if I could find my e: drive using the command run from the start menu when I noticed similar entries in the recent documents folder from the start menu. I forgot this shortcut in the past and by chance came across it accidentally. How to delete these lists. I've seen websites that need my e-mail and password. even if she had a lot of jibberish, some words were read by me at a superficial glance. What is a security breach? example: if I type only (a), then all files and websites beginning with a are displayed

  Hi Marc,

  Welcome to the Microsoft Community Forums.

  According to the description, it seems that you are facing problems in removing the story from the beginning, run the command. I'll be happy to help you in this problem.

  -What operating system is installed on your computer?

  Windows saves a history of the names of files, programs, and locations that you type in the Run dialog box. You can delete this history, which you can do if you use a public or shared computer.

  I suggest you follow the steps in the link to clear the history run in the start menu and check if it helps.

  Clear history run on the start menu

  http://Windows.Microsoft.com/en-us/Windows7/clear-the-run-history-on-the-start-menu

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• 3 and a half months of e-mail is missing from my Inbox. Where would he go?

  original title: lack of emails

  3 1/2 months of incoming messages have disappeared from my mail.  How can I reinstate them?

  Now that we know it is Outlook Express...

  Two reasons the most common for what you describe is disruption of the compacting process, (never touch anything until it's finished), or bloated folders. More about that below.

  Why OE insists on compacting folders when I close it? :
  http://www.insideoe.com/FAQs/why.htm#compact
   
  Why mail disappears:
  http://www.insideoe.com/problems/bugs.htm#mailgone
   
  About file Corruption:
  http://www.Microsoft.com/Windows/IE/community/columns/filecorruption.mspx

  Recovery methods:

  If you use XP/SP2 or SP3, and are fully patched, then you should have a backup of your dbx files in the Recycle Bin (or possibly the message store), copied as bak files.

  To restore a folder bak on the message store folder, first find the location of the message store.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, the .dbx files are by default marked as hidden. To view these files in the Solution Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.

  Close OE and in Windows Explorer, click on the dbx to the file missing or empty file, then drag it to the desktop. It can be deleted later once you have successfully restored the bak file. Minimize the message store.

  Open OE and, if the folder is missing, create a folder with the * exact * same name as the bak file you want to restore but without the .bak. For example: If the file is Saved.bak, the new folder should be named saved. Open the new folder, and then close OE. If the folder is there, but just empty, continue to the next step.

  First of all, check if there is a bak file already in the message. If there is, and you have removed the dbx file, go ahead and rename it in dbx.

  If it is not already in the message, open the trash and do a right-click on the file bak for the folder in question and click on restore. Open the message store up and replace the .bak by .dbx file extension. Close the message store and open OE. Messages must be in the folder.

  If messages are restored successfully, you can go ahead and delete the old dbx file that you moved to the desktop.
   
  If you have not then bak copies of your dbx files in the Recycle Bin:

  DBXpress run in extract disc Mode is the best chance to recover messages:
  http://www.oehelp.com/DBXpress/default.aspx

  And see:
  http://www.oehelp.com/OETips.aspx#4

  A general warning to help avoid this in the future:

  Do not archive mail in default OE folders. They finally are damaged. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• TextFlow and controller being created too early?

  I drove my work with the TextFlow into a component of the canvas, he is in a SWC and successfully is part of the application, so that it has been designed. No problems. Okay, now time to re - use my work in another app that could benefit from a rich text item. At through the usual movements and got all my UI for my component rendered except the TextFlow text!
  
  Then I discovered, that's when I resized the browser window that my hosting Flex application, the waterfall resize event got the TextFlow to finish rendering, scroll bars had poorly paid, and he was ready to accept entries with the blinking cursor.
  
  Here is a dump of some tracing statements that I have in my code, I'm working on the order in which events are pass and when the text stream gets adequate measures:
  
  Composer-> resize-> TextFlow New Dimensions-> w: 0 h: 0
  Composer-> Display Controller-> TextFlow Dimensions creation-> w: 754 H: 0
  Composer-> created
  MessageEditorBase-> created
  MessageEditorBase-> event-> resize
  MessageEditorBase-> event-> display
  Composer-> resize-> TextFlow New Dimensions-> w: 754 H: 0
  MessageEditorBase-> event-> resize
  Composer-> resize-> TextFlow New Dimensions-> w: 1328 h: 274
  MessageEditorBase-> event-> resize
  Composer-> resize-> TextFlow New Dimensions-> w: 1328 H: 275
  MessageEditorBase-> event-> resize
  Composer-> resize-> TextFlow New Dimensions-> w: 1329 h: 276
  MessageEditorBase-> event-> resize
  Composer-> resize-> TextFlow New Dimensions-> w: 1334 H: 277
  MessageEditorBase-> event-> resize
  Composer-> resize-> TextFlow New Dimensions-> w: 1350 h: 279
  
  "MessageEditorBase" is a canvas (used as a tab) that is displayed to the user. In this painting there has many components, including the 'composer' who is actually a toolbar of the elegant buttons and format works, and then a blank canvas that holds a UIComponent and becomes the DisplayObjectController. Works fine in my other app, code is near line for line with examples of Adobe.
  
  Notice how he starts 0,0; and then gets a measure of the width of 754; Finally when I the user resize the application complete the rest of the appropriate dimensions do get calculated.
  
  I don't think it's a problem of TextFlow, but I can't say that I understand the hierarchy made enough Flex have implemented a TextFlow and its controller in the right way with this app.
  
  Any thoughts? If you would like more information, just ask and I will try to explain as best as possible.
  
  

  It turns out that with a lot of statements of fiddling and trace, I found a way to initialize the DisplayObjectController with valid pixel values. In your examples of TLF, the developers always created a controller display object using the specific dimensions, such as 250 x 250. But I need my text component to be created dynamically depending on the size of the screen of the user. This was not correctly after I upgraded to build TLF 370, although he is not even a problem TLF.

  I have taken the steps of the parent Canvas. For some strange reason, in the world of measurement of Flex components, the child canvas further down into the application, I added the sprite was not get metered. When I switched the controller values width and height of this child, so they were 0.

  I hope that makes sense, but anyway, problem fixed.

  Edit:

  Here is an example of my code by using a custom controller that had the overloaded event keyDown:

  theController = new ComposerDisplayController (uiFlowComponent, uiTextArea.width, uiTextArea.height, this);

  I spent the values I would expect UI to measure rather than provide me explicit pixel values. I had a problem when the user interface gave me zero.

• The autodeploiement based on the Start Date

  Hello world
  
  I have a requirement that I take a stream of HR (GTC FF) and this user from IOM and AD based on the start date of the provision. Without taking into account the start date, I can do it by assigning a role that contains an access strategy for AD. Under certain conditions, I attribute this role based on an attribute in the HR feed with a ruler, I defined.
  
  then how I also factor in the start date in the rule I created which determines if the role must be assigned. It does not resemble the rule designer can handle anything, except for string literals. If I can account for the date, I could probably use a scheduled task to later assign roles to users based on their start date. so in this process I assign the role if the two attribute condition and departure date are met.
  
  I could take a different approach and say I'm not going to assign the role to all through the accession of any rule and just manipulate through scheduled tasks. I'm not sure I like this approach, but if that's the solution preferred, please let me know.
  
  Thank you

  I suggest the route of the scheduled task. Recon in your current values, including the start date. Create an another UDF which is a checkbox, or a few true/false, yes/no field type. In your scheduled task, find users who have a start date< current="" time="" and="" then="" mark="" the="" udf="" as="" the="" true/yes/checked="" value.="" in="" your="" group="" membership="" rule="" for="" ad="" provisioning,="" add="" a="" rule="" that="" checks="" for="" this="" field.="" this="" will="" then="" trigger="" the="" access="" policy="" to="" apply.="" i="" have="" used="" this="" technique="" before="" and="" it="" works="" very="" well="" to="" turn="" a="" field="" that="" you="" can't="" have="" a="" group="" membership="" rule="" on="" turned="" into="" a="" field="" that="" can="" have="" a="" rule="">

  -Kevin

• Report script to extract two year with different months

  Hello
  
  I need to create a report script to extract data from two years with different months.
  For example: 2009: seven to June
  2010: July to December
  
  How can I combine two of them in the script for a single report?
  
  Thank you
  
  Lian

  Set up your first extraction for 2009: seven to June

  Finish with the bang (!)

  Then add in the second extraction for 2010: July to December

  Finish with the bang (!)

  Essentially two separate report of scripts, but if you put them in one, separated by a bang. It will work one after the other, in the same report, issued to the same file script.

  This will accomplish what you're asking.

• Sort data with the name of the month

  Hi all
  I have a table column contains data type varchar2 and got every month (Jan - Dec) but he got another string "annual". I can't sort the data using the to_date function.
  
  I am train simple statement like that-
  
  Select item_id, description, name, order_month
  of my_orders
  order of to_date (order_month, 'Month')
  
  but get error 'Invalid MONTH A'
  
  Is it possible that I dispense the * "Annual" * in the list and then stopped a month?
  
  Thanks in advance,
  
  Pascal M
  
  http://Tajuddin.whitepagesbd.com

  You can try

  order by to_date(nullif(order_month,'Annual'),'Month')
  

  followed by

  nulls last
  

  or

  nulls first
  

  If you prefer to have annual on the top or bottom of the results of the query.

  Alessandro Bye

• bottom of the screen is now two lines upward. shows start button, time, day and date. Was just a line down

  The bottom of the screen is now two rows.  It shows the start buttom, hour, day, and date.  It was just a single line.  What makes my smaller screen.  Thank you and help.

  http://www.petermartinconsult.supanet.com/computer/Windows/taskbar.htm

  Visit this link and look under #4, "the task bars height is excessive," it will lead you to a link that may solve your problem. The link is "over heihgt fix" then #6 "QLB is two times higher than normal.